FCC ID: 2AWCN-UNIQ0122 7 Inch Tablet Space 7

7 Inch Tablet Space 7 User Manual UNIQ0122 Read Before Use Your tablet is manufactured and designed for mobile use. As the tablet software is updated regularly, this User Manual may not cover all aspects of new features. Please read the following instructions carefully:

Do not place objects on top of the tablet, as objects may scratch the screen. Protect the device from moisture, dust or smoky environments, as these may harm the tablet. The tablet is not resistant to water or moisture. Avoid using the tablet in a humid environment. Do not expose the device to direct sunlight or heat sources. Do not place the tablet on uneven or unstable surfaces. Avoid using this device in strong magnetic and static environments as much as possible. Do not drop the tablet or impact it against a hard surface. Dropping the tablet can damage the LCD screen, which is not covered by warranty. Operating Temperature: This tablet shou ld only be used in environments with ambient temperatures between 32F (0C) and 113F (45C ). Do not force or attempt to insert items with different ports/plugs into the tablet. Do not use your tablet while driving. Use only manufacturer approved chargers. The device and adapter may produce some heat during normal operation or charging. Avoid placing them on soft surfaces or other locations/conditions that may prevent normal dispersion of heat, which can Read Before Use (continued) cause device overheating. To prevent discomfort or injury from heat exposure, do not leave the tablet on your lap or other parts of the body. Once charged, disconnect the tablet from the outlet. Do not use a pen or any sharp object to tap the screen. Clean only with a dry, soft cloth. Do no disassemble with tablet. Refer to a certifie service technician for repairs. Do not disconnect the tablet during formatting, installing or removing external devices. Tablet Overview 5 6 4 3 2 1 7 8 8 UNIQCELL 1.Reset 2.Power 3.Volume down 4.Volume up 5.Earphone 6.Micro USB Port 7.Micro SD Card Slot (Request open the back cover) 8.Dual SIM Card Slot (Request open the back cover) Touchscreen Basics Tap Tap the screen once to activate an item. Touch & Hold Touch and hold to move an item by dragging. In many apps, touch and hold can offer more options. Swipe Quickly swipe your finger vertically or horizontally across the screen to move to other home pages or scroll through documents. Zoom in Touch the screen with two fingers and pinch them together. Zoom out Touch the screen with two fingers and spread them apart. Flick Flick the screen with your finger to quickly scroll through a long list, such as a library of music. Initial Setup Charging Fully charge your tablet for at least six hours before initial use. The battery icon at the upper right corner of the screen indicates the battery level or charging status. 1. Plug the small end of the USB cable into the micro USB port on the side of the device, and then plug the larger USB end into the power adapter. 2. Once fully charged, disconnect the device from the charger. Unplug the charger from the device first, and then unplug it from the electric outlet. NOTE: Use the included charging accessories to optimize your battery performance. Powering On To turn on your tablet, press and hold the power key for approximately two seconds. The Core Innovations logo indicates that the tablet is loading. 1. When you turn on your tablet for the first time, the Installer Wizard appears. Select the apps you wish to install on your tablet and follow the on-screen instructions. 2. It may take several minutes for your tablet to install the apps; please be patient. To turn off your tablet, press and hold the power button, and then tap Power off on the pop-up screen. NOTE: If you choose not to install the apps provided by the Installer Wizard, you may install them at a later time by tapping on the home screen. Home Screen When you turn on your tablet for the first time, you will see the main home screen panel. This panel is typically centered; you can access additional panels on either side of the main one by swiping your finger left or right. The menu, home and back keys help you navigate your tablet. You can adjust volume using the VOL+ and VOL-

buttons. Swipe up to reveal more apps. Homescreen Icons Battery Level: The white battery level indicator will decrease and change to red as the battery is drained. Wi-Fi Signal: As the Wi-Fi signal strength decreases, the blue bands will change to grey. All Apps: Tap to view all apps. Back: Go back to the previous screen. Recent apps: Open a list of recent apps. Tap an app to open or swipe left/right to remove the thumbnail. Home: Go back to the home screen. Hold and slide up to open Google Now. Increase Volume Decrease Volume Downloading Apps in Google Play Store Google Play Store brings together all of your favorite content in one place. Access movies, TV shows, music, books, magazines, apps, and more when you sign in with your Google Account. Connecting to Wi-Fi 2. 3. 1. 2. 4. 1. On the home screen or menu list, tap the Settings icon and then tap Wi-Fi to turn it on. The Wi-Fi section will show the list of networks detected. Tap the desired Wi-Fi network you want to connect to. When connected, the wireless indicator appears in the status bar. The white lines indicate connection strength. Note: If you select a secured network, you will be asked to enter the network key or password. The next time your tablet connects to a previously accessed wireless network, you will not be asked to enter the key or other security information again. Note: This tablet supports 2.4GHz Wi-Fi networks only. Creating a Google Account From your home screen, tap on the Settings app Tap on User & Accounts > Add Account. 3. You will be asked to choose the type of account you would like to add. Tap on Google. The screen will ask you to sign in to an existing Google account. If you dont have one yet, you can create a new one by tapping on Create Account on the bottom of the screen. Camera Tap the camera app to take pictures and videos to share with your friends and family. Taking Photos Make sure the icon bar on the left shows the camera Tap the camera icon to take a photo. Pinch two fingers together on the screen to zoom. Tap the menu icon in the top right corner for camera icon. settings. To switch to video record mode, swipe right from the left icon bar. Select the video icon. You can also change the resolution settings and try advanced features. Recording Video Make sure the icon bar on the left shows the video icon. Tap the video icon to start recording. Tap the video icon again to stop recording. Pinch two fingers together or spread them apart on While recording you can tap anywhere on the screen Tap the menu icon in the top right corner for video the screen to zoom. to take a picture. settings. Calling and connecting with 3G. Insert a valid SIM card into the Dual SIM Card Slot on the device (Request open the back cover). Before installing the SIM card, make sure the device is turned off. Only insert the SIM card into the correct position, and then you can make a call by the right APP. It supports full frequency of 2G, and it supports 3G bands as below: 900/1900/2100. And it support Dual Card and Dual Standby. Specifications 7 1024x600 IPS Screen Android 11 1GB RAM 32GB Built-in Storage USB Input Support 3G band900/1900/2100 Dual card and Dual Standby 3.5mm Headphone Jack Front and Back Cameras 2800mAh Battery Built-in G Sensor IN THE BOX 7 Tablet Micro USB Cable Wall Charger User Manual Screen protect film Transparent protect Cover FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information:

This 7Tablet Space 7 meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: 7Tablet Space 7 has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the phone kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the Tablet. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Space 7

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2AWCN-UNIQ0122 LABEL AND LOCATION 7 Inch Tablet Space 7 Model: UNIQ0122 FCC ID: 2AWCN-UNIQ0122 Caution:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size: L 4.0cm*W2.0cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

4G NET INC Agent Authorization Company: 4G NET INC Address: 3000 NW 72 AVENUE MIAMI Florida 33122 United States Product Name: 7 Inch Tablet Space 7 Trade Mark: N/A Model Number(s): UNIQ0122, UNIQ0122BL, UNIQ0122BU FCC ID: 2AWCN-UNIQ0122 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-12-30 Signature:

Name:

Xue Xiang Lin Title:

Manager Company: 4G NET INC

4G NET INC Address: 3000 NW 72 AVENUE MIAMI Florida 33122 United States To: MiCOM Labs Inc 575 Boulder Court, Pleasanton, California 94566, USA Dear Sir/Madam, We, 4G NET INC Hereby declares the following statement for MiCOM Labs Inc, PCB board, structure and internal of these model(s) are the same, Only models name is different for these models:

Product Name: 7 Inch Tablet Space 7 Trade Mark: N/A Model Number(s):

UNIQ0122, UNIQ0122BL, UNIQ0122BU Signature:

Date: 2021-12-30 Name:

Xue Xiang Lin Title:

Manager Company: 4G NET INC

4G NET INC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-12-30 Subject; Request for Confidentiality FCC ID: 2AWCN-UNIQ0122 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements For U-NII Devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Xue Xiang Lin Title: Manager

WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AWCN-UNIQ0122 4G NET INC Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-

case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Xue Xiang Lin / Manager Phone: 0018132030211 Email: Mansour-lin@hotmail.com Date: 2021-12-30 Page 1 of 1 Rev.2.0