app
s
|
Applicant Information
|
|
various
|
Effective |
2022-11-22
|
various
|
2021-09-20
|
various
|
2020-12-21
|
various
|
2020-11-17
|
various
|
Applicant's complete, legal business name |
Motorola Solutions, Inc.
|
various
|
FCC Registration Number (FRN) |
0003778479
|
various
|
Physical Address |
8000 West Sunrise Blvd
|
various
|
Ft Lauderdale, FL
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
t******@timcoengr.com
|
various
|
T******@TIMCOENGR.COM
|
various
|
TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
various
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
AZ4
|
various
|
Equipment Product Code |
89FT7133
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
D****** Z********
|
various
|
Title |
Regulatory Compliance Manager
|
various
|
Telephone Number |
95472********
|
various
|
Fax Number |
--********
|
various
|
E-mail |
d******@motorolasolutions.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/12/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | CBE - Citizens Band End User Devices |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | PCF - PCS Licensed Transmitter held to face |
various | TNF - Licensed Non-Broadcast Transmitter Held to Face |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Body worn 2-way portable radio |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 0.11 W/kg, < 0.10 W/kg, 0.11 W/kg and 3.65 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.
Class II Permissive Change: Adds Mobile Hotspot operation via software. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg and 3.65 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.
Class II Permissive Change: Adds Mobile Hotspot operation via software. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions < 0.10 W/kg, < 0.10 W/kg, < 0.10 W/kg and 3.65 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
Class II Permissive Change: Adds Mobile Hotspot operation via software. |
various | Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 0.23 W/kg, 0.31 W/kg, 0.31 W/kg and 3.65 W/kg, respectively.
This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.
Class II Permissive Change: Adds Mobile Hotspot operation via software. |
various | Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions 3.41 W/kg, 2.99 W/kg, 3.41 W/kg and 3.65 W/kg, respectively.
Class II Permissive Change: Adds Mobile Hotspot operation via software. |
various | Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, 0.11 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.
Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.
Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity. |
various | Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg.
Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are < 0.10 W/kg, < 0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.
Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity. |
various | Output Power listed is conducted. C2PC: The subject transceiver has changes to the LTE and BT/Wi-Fi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes.
Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity. |
various | Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.
Class II Permissive Change: Hardware optimizations consistent with FCC permissive change policies, including changes to improve LTE Band 48 spurious emissions, LTE AGPS Bands 13 and 14 Sensitivity and upgraded memory capacity. |
various | Output Power listed is conducted.
C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes. |
various | Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg,
C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes.
C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes. |
various | Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.
C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes. |
various | Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.
C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes.
C2PC: The subject transceiver has changes to the LTE and BT/Wifi internal antenna gain where the antenna type remains the same. The WLAN 5GHz Conducted power has been reduced. Clean up layout routing. LMR component value changes. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.43 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. |
various | Output Power listed is conducted. |
various | Output Power listed is the maximum conducted output power. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.42 W/kg, respectively. This device supports 20, 40 and 80 MHz modes. |
various | Output Power is EIRP and ERP for above and below 1 GHz, respectively. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 0.23 W/kg, 0.31 W/kg and 3.64 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
various | Output power listed is rated conducted; maximum conducted output power is 5.9 W, as allowed by 47 CFR 90.205(s). Output is at the antenna terminal of the device and must not exceed that tested for SAR compliance. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are 3.41 W/kg, 2.99 W/kg and 3.64 W/kg, |
various | Output Power is EIRP. Body-worn SAR compliance is limited to the specific belt-clip and audio accessory configurations tested for this filing. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements, and users must be provided with the training information. The highest reported SAR for head (face), body-worn accessory and simultaneous transmission exposure conditions are <0.10 W/kg, <0.10 W/kg and 3.64 W/kg, respectively. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Motorola Penang Advanced Communication Laboratory
|
various
|
Sporton International (Kunshan) Inc.
|
various
|
Name |
H**** H********
|
various
|
J**** T********
|
various
|
Telephone Number |
604-2********
|
various
|
+86 0********
|
various
|
Fax Number |
604 6********
|
various
|
E-mail |
h******@motorolasolutions.com
|
various
|
J******@sporton.com.tw
|
|