NEXT-GENERATION SMART RADIO MOTOTRBO PORTABLE MOTOTRBO Ion Smart Radio User Guide DECEMBER 2020 2020 Motorola Solutions, Inc. All rights reserved
*MN006217A01*
MN006217A01-AA MN006217A01-AB Contents Contents Chapter 1: Read Me First............................................................................................9 1.1 Software Version................................................................................................................... 10 Chapter 2: Radio Care.............................................................................................. 11 2.1 Specifications.........................................................................................................................11 Chapter 3: Radio Overview...................................................................................... 17 3.1 Programmable Buttons.......................................................................................................... 18 3.2 ViQi........................................................................................................................................ 20 Chapter 4: System Overview....................................................................................24 4.1 Capacity Max......................................................................................................................... 24 4.2 Conventional Analog and Digital Modes................................................................................24 4.3 IP Site Connect......................................................................................................................24 4.4 Capacity Plus.........................................................................................................................25 4.5 Direct Mode or Dual Capacity Direct Mode........................................................................... 25 Chapter 5: Getting Started........................................................................................27 5.1 Inserting or Removing MircoSD Card ................................................................................... 27 5.2 Inserting or Removing SIM Card........................................................................................... 28 5.3 Attaching or Detaching the Battery........................................................................................ 29 Attaching the Battery.........................................................................................................29 Detaching the Battery....................................................................................................... 29 5.4 Attaching or Removing the Accessory Connector Cover.......................................................30 Attaching the Accessory Connector Cover....................................................................... 30 Removing the Accessory Connector Cover...................................................................... 30 5.5 Attaching or Detaching the Antenna...................................................................................... 31 Attaching the Antenna.......................................................................................................31 Detaching the Antenna..................................................................................................... 31 5.6 Using the Carry Holder.......................................................................................................... 31 Inserting the Radio into the Carry Holder..........................................................................31 Removing the Radio from the Carry Holder......................................................................32 5.7 Charging the Radio................................................................................................................32 5.8 Turning the Radio On or Off.................................................................................................. 32 Turning the Radio On........................................................................................................32 Turning the Radio Off........................................................................................................32 5.9 Adjusting the Volume.............................................................................................................32 5.10 Removing Camera Lens Protective Cover.......................................................................... 33 5.11 On-screen Keyboard Overview............................................................................................34 2 MN006217A01-AB Contents 5.12 Touchscreen Navigation...................................................................................................... 34 Chapter 6: Home Screen Overview......................................................................... 36 6.1 Identity and Status Widget.....................................................................................................37 6.1.1 Managing Operational Status.................................................................................. 37 6.1.2 User Login Feature.................................................................................................. 38 6.1.2.1 Logging In to Automatic Registration Service............................................ 38 6.1.2.2 Logging Out of Automatic Registration Service......................................... 38 6.1.3 Entering the Soft ID..................................................................................................38 6.2 Status Indicators.................................................................................................................... 39 6.2.1 Status Icons............................................................................................................. 39 6.2.2 Radio Control Widgets Icons................................................................................... 40 6.2.3 LED Indicators......................................................................................................... 41 6.2.4 Backlight Indicators..................................................................................................41 6.2.5 Lightbar Indicators................................................................................................... 42 Chapter 7: General Radio Settings..........................................................................44 7.1 Accessing Radio Settings...................................................................................................... 44 Creating Radio Settings as Shortcut in Home Screen...................................................... 44 7.2 Adjusting Display Brightness................................................................................................. 44 7.3 Turning On Dark Theme........................................................................................................ 44 7.4 Setting the Clock....................................................................................................................44 7.5 Setting the Front Display Timer............................................................................................. 45 7.6 Screen Lock...........................................................................................................................45 7.6.1 Unlocking Screen.....................................................................................................45 7.7 Setting Languages.................................................................................................................46 7.8 Audio Settings........................................................................................................................46 7.8.1 Turning Do Not Disturb On or Off............................................................................ 46 Turning Do Not Disturb On.....................................................................................46 Turning Do Not Disturb Off.....................................................................................46 7.8.1.1 Setting Do Not Disturb............................................................................... 47 7.8.2 Accessing Radio Audio Settings.............................................................................. 47 7.8.2.1 Setting Audio Preference........................................................................... 48 7.9 Airplane Mode........................................................................................................................48 7.9.1 Entering Airplane Mode........................................................................................... 49 7.10 USB Desense...................................................................................................................... 49 7.11 Battery................................................................................................................................. 49 7.11.1 Viewing Battery IMPRES Information.................................................................... 49 7.11.1.1 Battery Information...................................................................................50 7.11.2 Setting Battery Saver............................................................................................. 50 7.11.3 Turning Battery Percentage On or Off................................................................... 51 3 MN006217A01-AB Contents Turning Battery Percentage On............................................................................. 51 Turning Battery Percentage Off............................................................................. 51 Chapter 8: About Device.......................................................................................... 52 8.1 Accessing Radio Advanced................................................................................................... 52 8.1.1 Accessing Regulatory Label.................................................................................... 53 Chapter 9: Connectivity............................................................................................54 9.1 LTE........................................................................................................................................ 54 9.2 Wi-Fi Operation......................................................................................................................54 9.2.1 Turning Wi-Fi On or Off............................................................................................55 Turning Wi-Fi On....................................................................................................55 Turning Wi-Fi Off....................................................................................................55 9.2.2 Accessing Network.................................................................................................. 55 9.3 Bluetooth................................................................................................................................56 9.3.1 Turning Bluetooth On or Off.....................................................................................56 Turning Bluetooth On............................................................................................. 56 Turning Bluetooth Off............................................................................................. 56 9.3.2 Connecting to Bluetooth Devices.............................................................................56 9.3.3 Disconnecting from Bluetooth Devices.................................................................... 57 9.3.4 Viewing Device Details............................................................................................ 57 9.3.5 Editing Device Name............................................................................................... 57 9.3.6 Deleting Device Name............................................................................................. 57 9.3.7 Bluetooth Profiles ....................................................................................................57 Chapter 10: Basic Radio Operation.........................................................................59 10.1 Responding to Notifications................................................................................................. 59 10.2 Managing Home Screen Widgets........................................................................................ 59 10.3 Zone and Channel Selections..............................................................................................60 10.3.1 Selecting Zone....................................................................................................... 60 10.3.2 Selecting Channel..................................................................................................60 10.3.2.1 Channel Error Messages......................................................................... 61 10.4 Managing Mode Select Menus............................................................................................ 61 10.5 Talkaround...........................................................................................................................61 10.5.1 Toggling Between Repeater and Talkaround Mode.............................................. 61 10.6 Power Level......................................................................................................................... 62 10.6.1 Setting Power Level............................................................................................... 62 10.7 Setting LED Indicator...........................................................................................................62 10.8 Setting Squelch Levels........................................................................................................ 62 10.9 Toggling the Controls and Buttons Tones On or Off............................................................62 Chapter 11: Types of Radio Calls............................................................................ 64 11.1 Making Calls........................................................................................................................ 64 4 MN006217A01-AB Contents 11.2 Responding to Calls.............................................................................................................65 Chapter 12: Emergency Operation.......................................................................... 66 12.1 Sending Emergency Alarms................................................................................................ 67 12.2 Sending Emergency Alarms with Call..................................................................................67 12.3 Sending Emergency Alarms with Voice to Follow............................................................... 68 12.4 Receiving and Responding to Emergency...........................................................................68 12.5 Exiting Emergency Mode.....................................................................................................68 Chapter 13: Man Down..............................................................................................70 13.1 Turning the Man Down Feature On or Off........................................................................... 70 Turning the Man Down Feature On.................................................................................. 70 Turning the Man Down Feature Off.................................................................................. 70 13.2 Exiting Man Down................................................................................................................70 Chapter 14: Lone Worker......................................................................................... 71 Chapter 15: Privacy...................................................................................................72 15.1 Turning Privacy On or Off.................................................................................................... 72 Chapter 16: Contacts Settings.................................................................................74 16.1 Contacts Icons..................................................................................................................... 74 16.2 Accessing Contact Settings................................................................................................. 74 16.2.1 Quick Actions......................................................................................................... 76 16.2.1.1 Setting Quick Action.................................................................................76 16.2.1.2 Using Quick Action...................................................................................77 Chapter 17: SmartProgramming..............................................................................78 Chapter 18: Voice Operating Transmission........................................................... 79 18.1 Setting Voice Operating Transmission................................................................................ 79 Chapter 19: Text Messaging.................................................................................... 80 19.1 Accessing Text Messages................................................................................................... 80 19.2 Setting Message Alert Tone................................................................................................ 81 Chapter 20: Security................................................................................................. 82 20.1 Disabling Radio....................................................................................................................82 20.2 Enabling Radio.................................................................................................................... 82 Chapter 21: Call Indicator Settings......................................................................... 84 21.1 Assigning Ring Styles.......................................................................................................... 84 Chapter 22: Recent Calls..........................................................................................85 22.1 Accessing Recent Calls....................................................................................................... 86 Chapter 23: Call Queue.............................................................................................87 23.1 Receiving a Call Queue....................................................................................................... 87 Chapter 24: Priority Call........................................................................................... 88 5 MN006217A01-AB Contents 24.1 Switching Priority Call Level................................................................................................ 88 Chapter 25: Scan.......................................................................................................89 25.1 Turning Scan On or Off........................................................................................................90 25.2 Scan Talkback..................................................................................................................... 90 25.3 Nuisance Channels..............................................................................................................90 25.3.1 Deleting Nuisance Channels..................................................................................90 25.3.2 Restoring a Nuisance Channel.............................................................................. 91 25.4 Priority Monitor.....................................................................................................................91 25.5 Receive Group List.............................................................................................................. 91 25.6 Scan Lists............................................................................................................................ 91 25.6.1 Accessing Scan List...............................................................................................92 25.7 Flexible Receive List ...........................................................................................................92 25.7.1 Accessing Flexible Receive List.............................................................................93 25.8 Multi-Talkgroup Affiliation.................................................................................................... 93 25.8.1 Adding Talkgroup Affiliation................................................................................... 93 25.8.2 Removing Talkgroup Affiliation.............................................................................. 93 Chapter 26: Dynamic Caller Alias............................................................................94 26.1 Editing Your Caller Alias...................................................................................................... 94 26.2 Viewing the Caller Aliases List.............................................................................................94 26.3 Initiating Private Call From the Caller Aliases List............................................................... 95 Chapter 27: Location.................................................................................................96 27.1 Turning Location On or Off.................................................................................................. 96 Turning Location On......................................................................................................... 96 Turning Location Off......................................................................................................... 96 27.2 Indoor Location.................................................................................................................... 96 27.2.1 Turning Indoor Location On or Off......................................................................... 96 Turning Indoor Location On................................................................................... 96 Turning Indoor Location Off................................................................................... 97 Chapter 28: Conventional Squelch Operation........................................................98 Chapter 29: Using the PL Defeat Feature............................................................... 99 Chapter 30: Home Channel Reminder...................................................................100 30.1 Muting Home Channel Reminder...................................................................................... 100 30.2 Setting New Home Channel.............................................................................................. 100 Chapter 31: Monitor Feature.................................................................................. 101 31.1 Monitoring Channel............................................................................................................101 31.2 Permanent Monitor ........................................................................................................... 101 31.2.1 Turning the Permanent Monitor On..................................................................... 101 31.2.2 Turning the Permanent Monitor Off..................................................................... 101 6 MN006217A01-AB Contents Chapter 32: Trunking System Control...................................................................102 32.1 Viewing RSSI Value...........................................................................................................102 Chapter 33: Dynamic Group Number Assignment.............................................. 103 33.1 Making DGNA Calls...........................................................................................................103 33.2 Making Non-DGNA Calls................................................................................................... 104 33.3 Receiving and Responding to DGNA Calls....................................................................... 104 Chapter 34: Auto Roaming.....................................................................................105 34.1 Turning Site Lock On or Off............................................................................................... 105 Turning Site Lock On...................................................................................................... 105 Turning Site Lock Off...................................................................................................... 105 34.2 Accessing Active Site Search............................................................................................ 106 34.3 Accessing Current Site Information................................................................................... 106 34.4 Accessing Neighboring Site Information............................................................................106 Chapter 35: Radio Check........................................................................................107 35.1 Sending Radio Check........................................................................................................ 107 Chapter 36: Initiating Transmit Interrupt...............................................................108 Chapter 37: Auto-Range Transponder System ................................................... 109 Chapter 38: Applications........................................................................................110 38.1 Camera.............................................................................................................................. 111 38.1.1 Taking Photos...................................................................................................... 111 38.1.2 Recording Videos.................................................................................................112 38.2 Gallery............................................................................................................................... 112 38.2.1 Viewing and Browsing in Gallery......................................................................... 113 38.2.2 Sharing Items from Photos.................................................................................. 113 38.2.3 Deleting Items from Gallery................................................................................. 113 38.2.4 Cropping Photos.................................................................................................. 114 38.2.5 Rotating Photos................................................................................................... 114 38.2.6 Watching Videos.................................................................................................. 114 38.3 Scanning Barcode or QR Code......................................................................................... 115 38.4 Turning On the Flash Light................................................................................................ 115 38.5 Managing Downloads........................................................................................................ 115 38.6 Exploring Files................................................................................................................... 115 Chapter 39: Authorized Accessories List ............................................................ 117 Legal and Compliance Statements........................................................................118 Supplier's Declaration of Conformity..........................................................................................118 Industry Canada WLAN Statement............................................................................................119 Notice to Users (FCC)............................................................................................................... 119 Notice to Users (Industry Canada)............................................................................................ 119 7 MN006217A01-AB Contents Disclaimer.................................................................................................................................. 119 Computer Software Copyrights..................................................................................................119 Copyrights and Trademarks...................................................................................................... 120 Important Safety Information..................................................................................................... 120 Batteries and Chargers Warranty.......................................................................... 122 The Workmanship Warranty...................................................................................................... 122 The Capacity Warranty.............................................................................................................. 122 Limited Warranty.....................................................................................................123 MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS................................................... 123 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:............................................... 123 II. GENERAL PROVISIONS...................................................................................................... 123 III. STATE LAW RIGHTS:..........................................................................................................123 IV. HOW TO GET WARRANTY SERVICE................................................................................124 V. WHAT THIS WARRANTY DOES NOT COVER................................................................... 124 VI. PATENT AND SOFTWARE PROVISIONS..........................................................................124 VII. GOVERNING LAW..............................................................................................................125 VIII. For Australia Only...............................................................................................................125 8 MN006217A01-AB Read Me First Chapter 1 Read Me First This user guide covers the basic operations of your radios. Notations Used in This Manual Throughout the text in this publication, you notice the use of Warning, Caution, and Notice. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed. WARNING: An operational procedure, practice, or condition, and so on, which may result in injury or death if not carefully observed. CAUTION: An operational procedure, practice, or condition, and so on, which may result in damage to the equipment if not carefully observed. NOTICE: An operational procedure, practice, or condition, and so on, which is essential to emphasize. The following special notations are used throughout the text to highlight certain information or items:
Special Notations Table 1: Special Notations Example Menu key or PTT button Your radio shows Bluetooth On.
<required ID>
Setup Tone All Tones Description Bold words indicate a name of a key, button, or soft menu item. Typewriter words indicate the MMI strings or messages displayed on your radio. The courier, bold, italic, and angle brackets indi-
cate user input. Bold words with the arrow in between indicate the navigation structure in the menu items. Feature and Service Availability Your dealer or administrator may have customized your radio for your specific needs. NOTICE: Not all features in the manual are available in your radio. Contact your dealer or administrator for more information. You can consult your dealer or system administrator about the following:
What are the functions of each button?
Which optional accessories may suit your needs?
What are the best radio usage practices for effective communication?
What maintenance procedures promote longer radio life?
9 MN006217A01-AB Chapter 1: Read Me First 1.1 Software Version All the features described in the following sections are supported by the software version XX or later. Contact your dealer or administrator for more information. 10 MN006217A01-AB Radio Care Chapter 2 Radio Care Table 2: IP Specification IP Specification IP68 This section describes the basic handling precaution of the radio. Description Allows your radio to withstand two meters of water for two hours, and adverse field condi-
tions such as water drops, snow, dirt, grease, or other surface contaminants. CAUTION: Do not disassemble your radio. This could damage radio seals and result in leak paths into the radio. Radio maintenance should only be done in service depot that is equipped to test and replace the seal on the radio. If your radio has been submersed in water, shake your radio well to remove any water that may be trapped inside the speaker grille and microphone port. Trapped water could cause decreased audio performance. If your radio's battery contact area has been exposed to water, clean and dry battery contacts on both your radio and the battery before attaching the battery to radio. The residual water could short-
circuit the radio. If your radio has been submersed in a corrosive substance (for example, saltwater), rinse radio and battery in fresh water then dry radio and battery. To clean the exterior surfaces of your radio, use a diluted solution of mild dishwashing detergent and fresh water (for example, one teaspoon of detergent to one gallon of water). Your radio is designed to be submersible to a maximum depth of 2 m and a maximum submersion time of 120 minutes. Exceeding maximum limit may result in damage to your radio. 2.1 Specifications General Specification Table 3: Software Parameter Operating System Table 4: Hardware Parameter Main Display Google Mobility Services Enabled Value Android 10 Value 4.0" (480 x 800) 11 MN006217A01-AB Chapter 2: Radio Care Parameter Value Capacitive Touch Technology: Usable with Gloves Up to 4 mm Thick, Resistant to False Actuation from Fresh or Salt Water, Snow, Dirt or Grease Top Display Memory 1.05" Monochromatic LCD RAM: 4 GB Internal Storage: 32 GB Card Slot North America (NA): eSIM Expandable Storage (External): 128 GB microSD card Camera Sensor Platform User Interface High Velocity User Interface: Large Touch Targets,Shallow Menu Hierarchy, Home Screen Information at a Glance, Integrated An-
droid Applications Mission Critical Buttons Push-to-Talk (PTT) Button 1 Nano SIM 1 Micro SD Rear: 13 MP Auto Focus Digital Zoom Hall Sensor Barometer Gyroscope E-Compass High-Output LED Flash Ambient Light Sensor Accelerometer Emergency Button Three Programmable Buttons On/Off/Volume knob Display Sleep/Wake button Channel Selector knob Table 5: Audio Parameter Audio Output Power at Rated Audio Output Power at Max Value 1 W 3 W Audio Response (EIA)
+1, -3 dB Audio Features Adaptive Equalization 12 Adaptive Dual Microphone Noise Suppression Intensity Adaptive Gain Control MN006217A01-AB Chapter 2: Radio Care Parameter Value Adaptive Windnoise Mitigation Adaptive Howling Suppresso IMPRES Audio Accessory Compatibility ViQi VOICE INTERACTION Customizable Voice Announcements Voice Control: 13 Actions with Intuitive Commands Table 6: Media Parameter Supported Formats Value H.263, H.264, MPEG-4 SP, VP8, JPEG (,jpg), GIF (.gif), PNG
(.png), BMP (.bmp), WebP, (.webp) Formats Supported for Play-
back, Streaming, and Recording Supported File Types 3GPP (.3gp), MPEG-4 (.mp4), WebM (.webm), (.mkv) Video Recording Quality 4K (UHD) at 30 fps 1080p (FHD) at 60 fps Table 7: Ruggedness Parameter Ingress Protection Table 8: Security Parameter Root Detection IPx8 Submersion (2 m, 2 hr) Value IP6x Dust Value Standard Multi-Factor Authentication Optional Remote Configuration Trusted Third Party Provided Application Whitelisting Trusted Third Party Provided Over-the-Air Wipe and Lock Trusted Third Party Provided Integrity Monitoring Malware Blocking Standard Standard Table 9: Management Parameter Device Management Value RadioCentral SmartInsight1 1 Optional Feature 13 NOTICE: Hazloc Protection When properly equipped with Motorola UL-Approved battery, the device are UL Approved to TIA-4950 for use in Hazardous Locations, Division 1, Class I, II, III, Groups C,D,E, F, G;
Division 2, Class 1, Groups A,B,C,D, T3C. Tamb = -20 C to +60 C. MN006217A01-AB Chapter 2: Radio Care Connectivity Specifications Table 10: LTE Connectivity Parameter Supported Bands Device Class Certifications Value 4 North America (NA): 2, 4, 5, 7, 12, 13, 14, 17, 30, 48 (Private Band) International: 1, 2, 3, 4, 5, 7, 8, 20, 28, 38, 39, 40, 41 UMTS1 for International: 850 Mhz, 900 Mhz, 1700 Mhz, 1900 Mhz, 2100 Mhz North America (NA): Verizon,AT&T, Bell Mobility International: TTA IoT for Korea Table 11: DMR Connectivity Parameter Value Operational Systems Digital and Analog Conventional Dual Capacity Direct Mode IP Site Connect Capacity Plus Single or Multi-Site Capacity Max UHF Wide Band Up to 1000 Channels Up to 250 Zones Frequency Bands Channel Spacing Table 12: DMR Receiver Parameter Analog Sensitivity (12dB SI-
NAD) 12.5 kz 25 kHz2 Value 0.16 uV Digital Sensitivity (5% BER) 0.14uV Intermodulation (TIA603D) 70 dB Adjacent Channel Selectivity,
(TIA603A)-1T 60 dB (12.5 kHz channel) 70 dB (25 kHz channel2) 2 Not available in United States (USA). 14 MN006217A01-AB Chapter 2: Radio Care Parameter Value Adjacent Channel Selectivity,
(TIA603D)-2T 45 dB (12.5 kHz channel) 70 dB (25 kHz channel2) Spurious Rejection (TIA603D) 70 dB Table 13: DMR Transmitter Parameter RF Output Power Value High: 4 W Low: 1 W 4FSK Digital Modulation 12.5 kHz Data: 7K60F1D and 7K60FXD 12.5 kHz Voice: 7K60F1E and 7K60FXE Combination of 12.5 kHz Voice and Data: 7K60F1W Digital Protocol Conducted/Radiated Emis-
sions (ETSI) ETSI TS 102 361
-36 dBm < 1 GHz
-30 dBm > 1 GHz Adjacent Channel Power 60dB (12.5 kHz channel) 70dB (25 kHz channel2) Frequency Stability 0.5 ppm Table 14: Wi-Fi Connectivity Parameter Value Standards Supported 802.11a/b/g/n/ac Frequency Range 2.4 GHz, 5 GHz Security Capacity Parameter Version Parameter GNSS Table 15: Bluetooth Connectivity Table 16: Location Tracking Connectivity Value 5 Value Supports WPA, WEP, WPA-2, WPA-3 Up to 20 SSIDs Built-in GNSS (GPS/GLONASS/BEIDOU/GALILEO/AGPS) Indoor Positioning 15 MN006217A01-AB Chapter 2: Radio Care Battery Specifications Table 17: Energy Parameter Value IMPRES 2 Smart Battery Technology Capacity Standard: 2820 mAh Standard HazLoc: 2900 mAh High Capacity HazLoc: 4400 mAh Table 18: Physical Parameter Value Dimensions (H x W x D) With Standard Battery Dimensions (H x W x D) With Standard Hazloc Battery Dimensions (H x W x D) With High-Capacity Battery 142.5 mm x 69.3 mm x 29.22 mm 142.5 mm x 69.3 mm x 37.71 mm 142.5 mm x 69.3 mm x 40.71 mm Weight With Standard Battery Weight With Standard Hazloc Battery 430 g 460 g Weight High-Capacity Battery 499.5 g 16 MN006217A01-AB Radio Overview Chapter 3 Radio Overview Table 19: Radio Overview No. 1 2 3 4 5 6 7 8 9 10 11 Description Emergency button Channel Selector knob LED Indicator On/Off/Volume knob Top Display Holster Catch Feature Push-to-Talk (PTT) button 3-Dot Programmable Feature button 1-Dot Programmable Feature button 2-Dot Programmable Feature button Holster Rail 17 16 17 12 13 14 15 2 3 1 4 5 6 7 8 9 10 11 18 19 20 21 22 23 Description Front Microphone Touchscreen Display Sleep/Wake button Speaker Antenna Accessory Connector Rear Microphone LED Flash Camera Battery Latch Battery Charging Contacts MN006217A01-AB Chapter 3: Radio Overview No. 12 13 14 15 16 17 18 19 20 21 22 23 Function Active Site Search Bluetooth Audio Switch Call Alert Channel Knob Contacts Current Site Information Flexible RX List High/Low Power Intelligent Audio 18 3.1 Programmable Buttons You can program the programmable buttons as shortcuts to the following radio functions through Customer Programming Software (CPS). NOTICE: Contact your dealer for more information. Table 20: Assignable Radio Functions Description Allows you to search for an active site. Allows you to toggle the audio routing between internal radio speaker and external Bluetooth-
enabled accessory. Allows you to direct access to the contacts list and select the required contact to send call alert. Allows you to change channel. Provides direct access to the contacts list. Allows you to view current site information. Allows you to enable or disable a dynamic Rx list. Provides you the flexibility to add or remove talkgroup members. Allows you to toggle between high and low pow-
er. Allows you to toggle intelligent audio to on or off. Function Mandown Manual Dial For Private Manual Site Roam Message Mic AGC Monitor Neighboring Site Information Nuisance Delete One Touch Access Permanent Monitor Privacy Radio Check Radio Enable or Disable Radio Name Recent Calls Repeater or Talkaround Ring Alert Type Scan Site Lock Status Switch Speaker MN006217A01-AB Chapter 3: Radio Overview Description Allows you to toggle the Man Down alarms to on or off. Allows you to initiate Private Call by entering the subscriber ID. Allows you to start the manual site search. Allows you to access the Text Message feature in Digital mode and MDC Message feature in Analog mode through the radio menu (applica-
ble to Display model only). Allows you to toggle the internal microphone automatic gain control (AGC) to on or off. Allows you to monitor a channel. Allows you to access Neighboring Site Informa-
tion. Allows you to temporarily remove an unwanted channel from the scan list, except the Selected Channel. The nuisance deleted channel will be restored into the scan list, for instance, when ra-
dio is powered off and back on again. Allows you to direct access to the predefined call features. Allows you to monitor a selected channel for all radio traffic until function is disabled. Allows you to toggle the privacy to on or off. Allows you to check if the radio is active in the system. Allows a target radio to be remotely enabled or disabled. Displays the radio alias on the radio display. Allow you to view recent calls. Allows you to toggle between using a repeater and directly communicating with another radio. Allows you to direct access the Ring Alert Type setting. Allows you to toggle the scan to on or off. Allows you to enable the site lock to search only in current site or disable the site lock to search in other sites as well. Allows you to select the status list menu. Allows you to toggle the external audio feature on and off. External Audio re-routes the speaker audio from the attached Accessory to the inter-
nal speaker. 19 MN006217A01-AB Chapter 3: Radio Overview Function Tight/Normal Squelch Toggle AF Suppressor Toggle Call Priority Level Trill Enhancement TX Interrupt Remote Dekey Unassigned 3.2 ViQi Description Allows you to toggle between tight or normal squelch (applicable to Analog mode only). Allows you to toggle the AF Suppressor feature to on or off (applicable to Digital mode only). Allows you to enable your radio to enter Call Priority Level High or Normal. Allows you to toggle the trill enhancement to on or off. Allows you to stop an on-going voice call by de-
keying the transmitting radio or terminate the re-
peater call hang time in order to free up the channel. Indicates that the button function has not yet as-
signed. Voice Control Activation Allows you to initiate Voice Control commands. Voice Operating Transmission (VOX) Allows you to toggle the VOX to on or off. Zone Selection Allows you to select from a list of zones. ViQi allows you to manage your radio and perform information lookups using voice commands. This feature is purpose-built for better communication and is active when you press and hold the assigned programmable feature button on the radio. NOTICE: ViQi is available in English language only. You are able to operate the radio with your voice using the following commands. Table 21: ViQi Commands Feature Examples Zone and Channel To identify your current zone and channel, say the following com-
mands:
"Zone and channel"
"What is my zone and channel"
"Current zone and channel"
"What is my current zone and channel"
To change to a new zone and channel, say the following com-
mands:
"Zone <Zone Name>, channel <Channel Name>"
"Zone <Zone Name> and channel <Channel Name>"
"Zone to <Zone Name>, channel to <Channel Name>"
20 Feature Examples MN006217A01-AB Chapter 3: Radio Overview
"Zone to <Zone Name> and channel to <Channel Name>"
"Change zone to <Zone Name>, channel to <Channel Name>"
"Change zone to <Zone Name> and channel to <Channel Name>"
"Change zone to <Zone Name>, channel <Channel Name>"
"Change to zone <Zone Name>, channel <Channel Name>"
"Change to zone <Zone Name> and channel <Channel Name>"
"Go to zone <Zone Name>, channel <Channel Name>"
"Go to zone <Zone Name> and channel <Channel Name>"
"Switch zone to <Zone Name>, channel to <Channel Name>"
"Switch zone to <Zone Name> and channel to <Channel Name>"
"Switch to zone <Zone Name>, channel <Channel Name>"
"Switch to zone <Zone Name> and channel <Channel Name>"
To change to a new zone, say the following commands:
"Zone"
"What is my zone"
"Current zone"
"What is my current zone"
"Zone <Zone Name>"
"Change zone to <Zone Name>"
"Change to zone <Zone Name>"
"Go to zone <Zone Name>"
"Switch zone to <Zone Name>"
"Switch to zone <Zone Name>"
"Channel"
"What is my channel"
"Current channel"
"What is my current channel"
To change to a new channel, say the following commands:
"Channel <Channel Name>"
21 Zone To identify your current zone, say the following commands:
Channel To identify your current channel, say the following commands:
MN006217A01-AB Chapter 3: Radio Overview Feature Examples Volume To identify the volume level of your radio, say the following com-
mands:
"Change channel to <Channel Name>"
"Change to channel <Channel Name>"
"Go to channel <Channel Name>"
"Switch channel to <Channel Name>"
"Switch to channel <Channel Name>"
"Volume"
"What is my volume"
"Current volume"
To change the volume level of your radio, say "Volume <Volume Level>". The available commands and their respective volume levels are as follows:
<Low>, <min>, or <minimum> 10%
<Medium> 50%
<High>, <max>, or <maximum> 100%
<1> to <100> 10% to 100%
Battery To identify your battery level, say the following commands:
"Battery"
"What is my battery"
"Battery check"
"Battery level"
"What is my battery level"
"Battery status"
"What is my battery status"
"Time"
"Current time"
"Time check"
"What is the time"
"What time is it"
"Home channel"
"Change to home channel"
"Go to home channel"
"Switch to home channel"
Time To identify current time, say the following commands:
Home Channel To change to your home channel, say the following commands:
Scan 22 To start or stop scanning, say the following commands:
MN006217A01-AB Chapter 3: Radio Overview Feature Examples
"Start scan"
"Stop scan"
"Start scanning"
"Stop scanning"
Cancel Last Command To cancel your previous command, say "Cancel". NOTICE: Cancel command works within a five-second window after the last command. 23 MN006217A01-AB Chapter 4: System Overview Chapter 4 4.1 Capacity Max System Overview System overview explains what type of systems and modes available in the radio. Capacity Max is a trunked radio system based on MOTOTRBO control channels. MOTOTRBO digital radio products are marketed by Motorola Solutions primarily to business and industrial users. MOTOTRBO uses the European Telecommunications Standards Institute (ETSI) Digital Mobile Radio (DMR) standard, that is, two-slot Time Division Multiple Access (TDMA), to pack simultaneous voice or data in a 12.5 kHz channel (6.25 kHz equivalent). 4.2 Conventional Analog and Digital Modes Each channel in your radio can be configured as a conventional analog or conventional digital channel. Certain features are unavailable when switching from digital to analog mode, whereas some are available in both. There are minor differences on how each feature works but they do not affect the performance of your radio. 4.3 IP Site Connect This feature allows your radio to extend conventional communication beyond the reach of a single site by connecting to different available sites by using an Internet Protocol (IP) network. When the radio moves out of range from one site and into the range of another, the radio connects to the repeater of the new site to send or receive calls or data transmissions. This is done either automatically or manually depending on your settings. In an automatic site search, the radio scans through all available sites when the signal from the current site is weak or when the radio is unable to detect any signal from the current site. The radio then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value. In a manual site search, the radio searches for the next site in the roam list that is currently in range but which may not have the strongest signal and locks on to the repeater. NOTICE: Each channel can only have either Scan or Roam enabled, not both at the same time. Channels with this feature enabled can be added to a particular roam list. The radio searches the channels in the roam list during the automatic roam operation to locate the best site. A roam list supports a maximum of 16 channels, including the selected channel. NOTICE: You cannot manually add or delete an entry in the roam list. Contact your dealer for more information. 24 MN006217A01-AB Chapter 4: System Overview 4.4 Capacity Plus Capacity Plus is an entry-level trunked system for single and multiple sites. The single and multi-site dynamic trunking offers better capacity and coverage. NOTICE: If you try to access a feature not applicable to Capacity PlusSingle-Site or Capacity PlusMulti-Site by using a programmable button, you hear a negative indicator tone. Capacity PlusSingle-Site Capacity PlusSingle-Site is a single-site trunking configuration of the MOTOTRBO radio system, which uses a pool of channels to support hundreds of users and up to 254 groups. This configuration allows your radio to efficiently utilize the number of available programmed channels while in Repeater Mode. Your radio also has features that are available in conventional digital mode, IP Site Connect, and Capacity Plus. Capacity PlusMulti-Site Capacity PlusMulti-Site is a multi-channel trunking configuration of the MOTOTRBO radio system, combining the best of both Capacity Plus and IP Site Connect configurations. It allows your radio to extend trunking communication beyond the reach of a single site, by connecting to different available sites which are connected with an IP network. It also provides an increase in capacity by efficiently utilizing the combined number of available programmed channels supported by each of the available sites. When your radio moves out of range of one site and into the range of another, it connects to the repeater of the new site to send or receive calls or data transmissions. Depending on your settings, this is done automatically or manually. Automatically Your radio scans through all available sites when the signal from the current site is weak or unable to detect any signal and locks on to the repeater with the strongest RSSI value. Manually Your radio searches for the next site in the roam list that is currently in range which may not have the strongest signal, and locks on to it. Any channel with Multi-Site enabled can be added to a roam list. Your radio searches these channels during the automatic roam operation to locate the best site. NOTICE: You cannot manually add or delete an entry in the roam list. 4.5 Direct Mode or Dual Capacity Direct Mode If within the customers required coverage area, any system user can directly communicate with all of the other system users with just the output power of the transmitter in their portable or mobile radio, then a direct mode or dual capacity direct mode system can be used. Direct Mode or Dual Capacity Direct Mode (DCDM) is direct radio-to-radio communication for systems that do not use a repeater. When radios operate in direct mode or dual capacity direct mode, the radios always transmit and receive on the same frequency. Direct mode and dual capacity direct mode provide similar services to the end users, with the exception that dual capacity direct mode is only available in digital mode, and supports two simultaneous voice or data paths on a 12.5 kHz bandwidth channel while direct mode supports only one. Additionally, there are some minor differences. For example, dual capacity direct mode channels may not be used as GPS revert channels. 25 MN006217A01-AB Chapter 4: System Overview The radios are not limited to one direct mode/dual capacity direct mode frequency. They can be programmed to have different frequencies, which are selectable with the channel selector knob. Direct mode or dual capacity direct modes do not need over-the-air hang time for voice calls. The radio has an internal call (talk back) timer. The channel access method used before the call timer expires is impolite, since the radio is still a member of an active call. This is independent of the Channel Access selection for call initiation (polite or impolite). 26 Chapter 5 Getting Started Getting Started provides instructions to prepare your radio for use. 5.1 Inserting or Removing MircoSD Card Procedure:
1 Slide the battery latch into unlock position. 2 Remove the battery from the slot at the bottom of the radio. 3 Remove the microSD card cover and the microSD card tray. 4 Perform one of the following actions:
To insert, place the microSD card into the tray. To remove, take the microSD card out from the tray. MN006217A01-AB Getting Started 27 MN006217A01-AB Chapter 5: Getting Started Figure 1: Removing microSD Card 5.2 Inserting or Removing SIM Card NOTICE: This task is not applicable to NAG region. Your radio supports private or public SIM card. Procedure:
1 Slide the battery latch into unlock position. 2 Remove the battery from the slot at the bottom of the radio. 3 Remove the SIM card cover and the SIM card tray. 4 Perform one of the following actions:
To insert, place the SIM card into the tray. To remove, take out the SIM card from the tray. 28 Figure 2: Removing SIM Card MN006217A01-AB Chapter 5: Getting Started 5.3 Attaching or Detaching the Battery 1 Fit the battery into the slot at the bottom of the radio. 2 Push the top of the battery down until the latch snaps into place. Attaching the Battery Procedure:
Detaching the Battery Procedure:
1 Slide the battery latch into unlock position. 2 Remove the battery from the slot at the bottom of the radio. 29 MN006217A01-AB Chapter 5: Getting Started Figure 3: Detaching the Battery 5.4 Attaching or Removing the Accessory Connector Cover Attaching the Accessory Connector Cover Procedure:
1 Insert the slanted end into the slots above the universal connector. 2 Push the connector upwards. 3 Press the accessory connector downwards until you hear a click. Removing the Accessory Connector Cover Procedure:
1 Pull the connector outward. 2 Slide the connector downward. 3 Pull the connector latch outward. 30 MN006217A01-AB Chapter 5: Getting Started 5.5 Attaching or Detaching the Antenna Attaching the Antenna Procedure:
1 Set the antenna in the receptacle. 2 Turn the antenna clockwise. Detaching the Antenna Procedure:
1 Turn the antenna counterclockwise. 2 Remove the antenna from the receptacle. Figure 4: Detaching the Antenna 5.6 Using the Carry Holder Inserting the Radio into the Carry Holder Procedure:
1 Position the radio within the carry holder with the main speaker facing outward. 31 You can charge your radio using Motorola Solutions-approved single or multi-unit charger. MN006217A01-AB Chapter 5: Getting Started 2 Slide the radio down into the carry holder until it clicks in place. Removing the Radio from the Carry Holder Procedure:
1 Place the tip of your fingers on the ledge of the carry holder. 2 Push the bottom of the radio until it is released from the carry holder. 5.7 Charging the Radio Procedure:
1 Turn off the radio. 2 Place the radio in the charger. 5.8 Turning the Radio On or Off Turning the Radio On Procedure:
Turning the Radio Off Procedure:
5.9 Adjusting the Volume Procedure:
1 Perform one of the following actions:
Rotate the On/Off/Volume knob clockwise until a click sounds. Rotate the On/Off/Volume knob counterclockwise until a click sounds. To increase the volume, turn the On/Off/Volume knob clockwise. To decrease the volume, turn the On/Off/Volume knob counterclockwise. NOTICE:
Your radio can be programmed to have a minimum volume offset where the volume level cannot be lowered past the programmed minimum volume. Adjusting the volume actions is applicable for both Long Term Evolution (LTE) and Land Mobile Radio (LMR) volume control. 32 MN006217A01-AB Chapter 5: Getting Started 5.10 Removing Camera Lens Protective Cover Procedure:
Lift the protective film from the camera lens. Figure 5: Detaching the Antenna 33 MN006217A01-AB Chapter 5: Getting Started 5.11 On-screen Keyboard Overview Use the keyboard in portrait or landscape orientation to enter alphanumeric text on your radio. The keyboard supports auto-capitalization and word suggestions in the Messaging feature. Description Predictive text Backspace Enter Tap to insert space. Double-tap to insert a period. Tap to type in uppercase. Double-tap for caps lock. Tap to input numbers, punctuation, or symbols. Based on the language settings of your radio, you can also tap and hold a character to input alternate characters. 5.12 Touchscreen Navigation Table 22: Touchscreen Actions Results You can tap to perform the following actions:
Select items on the screen Type letters and symbols using the onscreen keyboard No. 1 2 3 4 5 6 Action Tap 34 1 2 3 6 5 4 MN006217A01-AB Chapter 5: Getting Started Action Results Press on-screen buttons Tap and hold You can tap and hold to perform the following actions:
Drag an application on the home screen to move it to a new location or to remove it Create a shortcut of an application on the home screen At an empty area of the home screen, tap and hold to lauch a menu to select wallpapers, widgets and Home settings You can move your finger up, down, left, or right on the screen to perform the following actions:
Unlock the screen View additional home screens View additional application icons in the Launcher window View more information on an application screen You can tap twice on a webpage, map, or other screen to zoom in and out. In some applications, you can zoom in and out by placing two fin-
gers on the screen and pinching them together (to zoom out) or spreading them apart (to zoom in). Swipe Double-tap Pinch 35 MN006217A01-AB Chapter 6: Home Screen Overview Chapter 6 Home Screen Overview No. Name Description Channel Status Icons Provides information or status specific to the selected channel. Light Bar Reflects the active call state of the radio. Radio Control Widget Displays channel errors, trunking statuses, call states, and notifi-
cations. Menu Feature Launcher Widget Allows you to change zone and channel from the home screen. Displays the top two priority features provisioned in the CPS. The items. More option contains all other programmed menu Google Folder A folder that keeps all the Google applications. Google Search bar A shortcut widget used to perform Google search using Chrome. Back button Allows you to return to previous screen or exit application win-
dows. 1 2 3 4 5 6 7 36 1 2 3 4 5 6 7 12 11 10 9 8 MN006217A01-AB Chapter 6: Home Screen Overview No. Name Description Home button Allows you to return to home screen. Overview button Allows you to view a list of applications that are currently active on your radio. 8 M-Apps Folder M-Apps folder contains Motorola Solutions applications:
M-Contacts M-Dialer M-Menu M-Messenger M-Radio Control M-Shift Manage If you open another application, M-Apps closes automatically. If you press the Overview softkey, M-Apps does not appear in Overview. 9 10 11 Home Channel Revert Allows you to revert to the Home Channel or Talkgroup. Radio Quick Settings Allows you to quickly toggle the radio communication settings. The settings are channel specific. Status Bar Status icons appear in the status bar to provide device status and feature notifications. 6.1 Identity and Status Widget The Identity and Status Widget displays the identity of the radio with either the Radio Alias, Soft ID, or User Login. This widget also allows you to send the operational status directly from the home screen. Figure 6: Identity and Status Widget 6.1.1 Managing Operational Status Procedure:
1 From the home screen, tap Identity and Status Widget. 2 Select the available status. 37 MN006217A01-AB Chapter 6: Home Screen Overview 6.1.2 User Login Feature This feature allows you to take on a friendly username. You can still send text messages without logging in as a user. The user login feature only enables the recipient of your message to identify you as the sender by assigning a username to your message. 6.1.2.1 Logging In to Automatic Registration Service Procedure:
1 From the home screen, tap Shift Manager Launcher User Login. 2 Perform one of the following actions:
To log in with an existing ID, tap your ID. To log in with a new ID, tap Login with new ID <preferred User Login ID>
Done. 3 Enter the authorized PIN, tap Done. If a PIN is not assigned to the ID, skip this step. The display shows the Progress screen. If the channel does not support Automatic Registration Service login, the display shows the status as Offline. 4 While sign in is in progress, tap Hide. After the login is completed, the Identity and Status Widget shows the login ID. 6.1.2.2 Logging Out of Automatic Registration Service Procedure:
1 From the home screen, tap Shift Manager Launcher <your ID> Yes. 2 Perform one of the following actions:
To clear the private data, tap Yes. To keep your private data, tap No. Soft ID entry is only allowed if it is enabled and User Login is not used. 1 From the home screen, tap Shift Manager Launcher Soft ID. 6.1.3 Entering the Soft ID Procedure:
2 Enter your Soft ID. Tap Done to confirm. 3 38 NOTICE: If you leave the Soft ID empty, the Work Manager Widget displays the Radio Alias ID if it is enabled. MN006217A01-AB Chapter 6: Home Screen Overview Status Indicators explain the Icons and LED indicators used in the radio. These icons appear at the status bar to provide device-specific information or status. Icon Name Battery Description Indicates the remaining battery level of the radio. The icon blinks when the battery level drops to 10% or low-
er. 6.2 Status Indicators 6.2.1 Status Icons
(Front dis-
play)
(Top dis-
play) Bluetooth On Steady Bluetooth is on and ready for Bluetooth con-
nection. Inverted Bluetooth is connected to an external Blue-
tooth device. Global Positioning Sys-
tem (GPS) GPS is enabled and its signal is available. No SIM SIM card is not inserted or detected. LTE Network Strength to The radio is connected to an LTE network. The number of bars represents the signal strength of the LTE net-
work. LTE No Service The radio is not connected to an LTE network. Data Disabled Notification (Top display only) The radio is connected to an LTE network but the data is disabled. The radio receives notification of an activity or event. Time Wi-Fi Indicates the current time. The radio is connected to a Wi-Fi network. The number of bars represents the signal strength of the Wi-Fi net-
work. 39 MN006217A01-AB Chapter 6: Home Screen Overview 6.2.2 Radio Control Widgets Icons These icons appear at the Radio Control Widget to provide information or status of LMR-specific features. Icon Name Description Call Priority High Dynamic Group Num-
ber Assignment
(DGNA) Direct Allows the system to preempt one of the ongo-
ing non-priority calls and initiate the requested high priority call when all channels are busy. Allows the console to assign and remove a new talkgroup from your radio over the air. The radio is configured for direct radio-to-radio communication in conventional operation. High Volume Data Monitor The radio is receiving high volume data and the channel is busy. The selected channel is being monitored in con-
ventional operation. Power Level Off The radio is set at high power. On The radio is set at low power. Response Inhibit Prevent your radio from responding to any in-
coming transmissions. Receiving The radio is receiving a call or data. to Received Signal Strength Indicator
(RSSI) Roaming The number of bars represents the received signal strength of the current site in trunking mode. The radio has roamed to and is registered to a foreign system. Transmit Inhibit The radio is blocking all transmissions. Scan The radio is scanning a scan list. Scan Priority 1or Scan Priority 2 Blinking Dot- The radio is in Scan Priority 1. Steady Dot - The radio is in Scan Priority 2. Secure Blinking The radio is receiving an encrypted voice call. Steady The radio is operating in a secure channel. Shared Frequency Allows your frequency to be shared. 40 MN006217A01-AB Chapter 6: Home Screen Overview Icon Name Description Transmitting The radio is transmitting a call or data. Unsecure The radio is operating in an unsecure channel. Voice Operating Transmission (VOX) Allows you to initiate hands-free voice-activated calls on a programmed channel. 6.2.3 LED Indicators Blinking Red Radio is transmitting in low battery state or indicating battery mismatch. Double Blinking Red Radio is receiving an emergency transmission. Rapidly Blinking Red Radio has failed the self-test upon powering up and is out of range. Solid Green Blinking Green Radio is powering up and transmitting. Radio firmware upgraded successfully. Double Blinking Green Radio is receiving a privacy-enabled call or data. Solid Yellow Radio is entering Permanent Monitor state. Blinking Yellow Radio is performing scan. Rapidly Blinking Yellow Radio is receiving Call Alert. 6.2.4 Backlight Indicators The top display backlight indicates the types of behaviour of the radio. Backlight Behaviour Description Orange Red When radio initiates or receives Emergency Alarm or Call. When radio is on the following critical alerts:
Low Battery Out of Range Inability to establish a full connection with the system. 41 MN006217A01-AB Chapter 6: Home Screen Overview Backlight Behaviour Description Green When radio receives the following calls:
Inability to authenticate or register with the system. Lost GPS signal or GPS function fails. Private Call Call Alert Selective Call Entering Geofence 6.2.5 Lightbar Indicators The Lightbar Indicator indicates the active call state of the radio. Color Light Blue Call State Open/Standby Gray 42 Yellow Receiving Call Red Transmitting Call Unprogrammed Color Call State MN006217A01-AB Chapter 6: Home Screen Overview 43 MN006217A01-AB Chapter 7: General Radio Settings Chapter 7 General Radio Settings This section explains the general settings that you can adjust on your radio. 7.1 Accessing Radio Settings Procedure:
From home screen, swipe up. Swipe down the notification panel. 2 Select Settings. 1 To access radio settings, perform one of the following actions:
Creating Radio Settings as Shortcut in Home Screen Procedure:
1 Locate Settings. 2 Long press and drag Settings to home screen. 7.2 Adjusting Display Brightness Procedure:
Brightness. 7.3 Turning On Dark Theme Procedure:
From home screen, tap Night Mode. 7.4 Setting the Clock Procedure:
44 1 Swipe up the home screen, tap Settings Clock. Swipe down the notification panel and perform one of the following actions:
To set a custom brightness level, drag the Brightness Slider. To automatically adjust the screen brightness based on the lighting conditions, tap Auto MN006217A01-AB Chapter 7: General Radio Settings 2 Perform one of the following actions:
Option Actions Toggling 24-hour format on or off tap Use 24-hour format. Toggling automatic time zone on or off tap Set Automatic. Select time zone manually a Toggle Set Automatic to off. b Tap Select Time Zone. 7.5 Setting the Front Display Timer This setting determines the period before the front display dims and turns off due to inactivity. Swipe up the home screen, tap
<required period>. Settings Display Front Display Timer Procedure:
7.6 Screen Lock You can set your radio screen to lock automatically by specifying a pattern, PIN, or a password to keep your data secure. IMPORTANT: If your radio screen lock option is set to None or Swipe, your data is not secured and can be accessed by anyone. When your radio is on, you can lock your radio by pressing the Display Sleep/Wake button, and unlock by providing a pattern, PIN or a password. If you did not specify a pattern, PIN, or a password you can also unlock your radio by swiping up the screen, or only by pressing the Display Sleep/Wake button if no locking option was set. When your radio is locked, the cellular network signal, phone calls, notification of new messages, missed calls, and upcoming appointments are still available and can be received. You can also set your radio to automatically lock after a specified time. 7.6.1 Unlocking Screen Procedure:
1 Press the Display Sleep/Wake button. 2 Swipe up the home screen. 3 Perform one of the following actions:
Option Actions Unlocking the screen with pattern Draw the specified pattern on the screen using your finger. Unlocking the screen with a PIN or password a Enter your pin or password. 45 MN006217A01-AB Chapter 7: General Radio Settings Option Actions b Tap Save. 7.7 Setting Languages Procedure:
7.8 Audio Settings Swipe up the home screen, tap Settings Languages <required Languages>. If the selected language is not supported by the Land Mobile Radio (LMR) setting, the selected language will revert to English whenever your radio operates in LMR setting. This section contains information on Audio Settings for Long Term Evolution (LTE) and Land Mobile Radio (LMR) system. If there is concurrent audio coming from both LTE and LMR system, your radio prioritizes the audio from LMR system. Depending on your radio Audio Settings when using a microphone, the LTE Audio may go on silent. 7.8.1 Turning Do Not Disturb On or Off The do not disturb setting allows you to mute alarms, reminders, events, messages, and calls. Turning Do Not Disturb On Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Do Not Disturb. Turning Do Not Disturb Off Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Do Not Disturb. Swipe up the home screen, tap Settings Sound Do Not Disturb Turn On Now. Swipe up the home screen, tap Settings Sound Do Not Disturb Turn Off Now. 46 MN006217A01-AB Chapter 7: General Radio Settings 7.8.1.1 Setting Do Not Disturb Procedure:
1 Swipe up the home screen, tap Settings Sound Do Not Disturb. 2 Perform one of the following actions:
Option Setting Do Not Disturb Exceptions for Calls Actions a Tap Calls. b Set the exception for the following options:
Allow Call Starred Calls Allow Repeat Callers Setting Do Not Disturb Exceptions for Messages Setting Do Not Disturb Exceptions for Other Features a Tap SMS, MMS and messaging apps. b Tap Allow messages. a Tap See all exceptions. b Set the exception for the following options:
Setting Restriction for Notifications a Tap Restrict Notifications. Allow Alarms Play Media Sounds Allow Touch Sounds Allow Reminders Allow Events b Set the restriction for the following options:
No sound from notifications No visuals or sound from notifications Custom a Tap Default Duration. b Perform one of the actions:
Tap Until you turn off. Tap and edit the <required duration>. Tap Ask every time. Setting Default Duration for Do Not Disturb 7.8.2 Accessing Radio Audio Settings Procedure:
1 Perform one of the following actions:
From the Menu Feature Launcher Widget, tap More Radio Audio Settings . 47 Swipe up the home screen, tap Settings Sound Radio Audio Settings. 2 To change the radio audio settings, select the following options:
MN006217A01-AB Chapter 7: General Radio Settings Audio Preference Default Level 1 Level 2 Level 3 Treble Boost Mid Boost Bass Boost Noise Suppressor Disabled Basic AF Suppressor Intelligent Audio Mic AGC Enhanced Auto (Default) 7.8.2.1 Setting Audio Preference Procedure:
1 Perform one of the following actions:
From the Radio Control Widget, tap Radio Quick Settings Audio Preference. From the Menu Feature Launcher Widget, tap More Audio Preference. 2 Perform one of the following actions:
To disable the previous selected Audio Preference and return to the default factory settings, tap Default. For audio profiles that compensate noise-induced hearing loss in adults above 40 years old, tap Level 1, Level 2, or Level 3. If you prefer audio profiles with tinnier, more nasal, or deeper sounds, tap Treble Boost, Mid Boost, or Bass Boost. The Airplane Mode disables your radio's ability to communicate over radio-frequency signal transmission. When Airplane Mode is enabled, Bluetooth and Wi-Fi connections automatically turn off. NOTICE: You can turn on Bluetooth, GPS, and Wi-Fi connections manually during Airplane Mode. When you are in Airplane Mode, the following occurs:
7.9 Airplane Mode 48 MN006217A01-AB Chapter 7: General Radio Settings The transmit inhibit automatically turns on. For Capacity Max, the transmitter and receiver is disabled. For non-Capacity Max, only the transmitter is disabled. You will face the following scenarios:
You cannot receive PTT calls and messages. You cannot receive alerts from others. 7.9.1 Entering Airplane Mode Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Airplane Mode. Swipe up the home screen, and tap Settings Network & internet Airplane Mode On. Your radio shows the Airplane mode icon in the Status bar. For Capacity Max, your radio displays an informative dialog message. 7.10 USB Desense When your radio is connected to another device using a USB cable, any receiving and transmitting activities are disabled. You will face the following scenarios:
You can only control the volume using Volume knob. You cannot press the PTT button. You cannot tap the Menu Feature Launcher Widget. For Capacity Max system, if you enable the airplane mode and disable the USB Desense, your radio displays the following indications:
Airplane mode and USB desense informative dialog boxes. Airplane mode icon. 7.11 Battery Procedure:
7.11.1 Viewing Battery IMPRES Information Perform one of the following actions:
From Settings tap Battery Battery IMPRESS Info. 49 MN006217A01-AB Chapter 7: General Radio Settings From the Menu Feature Launcher Widget, tap More Battery Info. Your radio display the battery conditions. For more information, refer Battery Information. 7.11.1.1 Battery Information Battery IMPRES info display the current status of your battery. Depending on the battery conditions, your radio shows the following information. Battery Condition Information Display on Radio Good Condition Remaining Capacity First Used Service Life Kit Number Battery needs recondition Battery Needs Recondi-
tion Wrong Battery Unknown Unknown Battery 7.11.2 Setting Battery Saver Procedure:
1 From Settings tap Battery Battery Saver. 2 Perform one of the following actions:
The top display shows WRONG BATT. Battery IMPRES info displays Wrong Battery. The display shows Wrong Battery notification. Upon powering up your radio, the display shows Wrong Battery di-
alog box. Option Actions Setting a schedule for battery saver a Tap Set a schedule. Toggling automatic battery saver off when fully charged Turning on battery saver manually Tap TURN ON NOW. Turning off battery saver manually Tap TURN OFF NOW. b Set the <required time>. Toggle Turn off when fully charged. 50 MN006217A01-AB Chapter 7: General Radio Settings 7.11.3 Turning Battery Percentage On or Off Turning Battery Percentage On Procedure:
1 From Settings, tap Battery. 2 Toggle Battery Percentage to on. Turning Battery Percentage Off Procedure:
1 From Settings, tap Battery. 2 Toggle Battery Percentage to off. The front radio display shows the current percentage of the battery. The current percentage of the battery on the front radio display disappears. 51 MN006217A01-AB Chapter 8: About Device Chapter 8 About Device Device name Phone number (sim slot 1) Phone number (sim slot 2) Radio Advanced Table 23: Radio Advanced Certificates IoT Status Radio Information You can view details about your device and access Radio Advanced for more information. You can view the following details in About Device:
The following describes the available information in Radio Advanced. Radio Advanced Information Description Provides information on available certificates in your radio. Provides IoT connection status. Provides the following information about your radio:
Regulatory Label Control Map Provides information about your radio regulato-
ry label. Provides the following information about your radio buttons or knobs:
Radio Alias Radio ID Software Version ESN-AP Codeplug Version Side Button 1 Side Button 2 Side Button 3 Orange Button Rotary Knob 1 Rotary Knob 2 8.1 Accessing Radio Advanced Perform one of the following actions:
Procedure:
52 MN006217A01-AB Chapter 8: About Device From the Menu Feature Launcher Widget, tap More Info. Swipe up the home screen, tap Settings About Device Radio Advanced. 8.1.1 Accessing Regulatory Label Procedure:
1 Perform one of the following actions:
From the Menu Feature Launcher Widget, tap More Info. Swipe up the home screen, tap Settings About Device Radio Advanced. 2 Select Regulatory Label. 53 MN006217A01-AB Chapter 9: Connectivity Chapter 9 Connectivity 9.1 LTE You can connect your radio to other devices, accessories, or network through different types of connectivity. Long Term Evolution (LTE) is to extend the data coverage of the radio when the Wi-Fi connection is unavailable. The LTE eSIM is installed into the radio at the Motorola Solutions factory and locked to the specific radio, so it cannot operate in any other radio or device. The eSIM is located at a slot in the rear chassis. Do not remove the eSIM, even if LTE is not active or in use. The following bands are available based on regions:
Table 24: Available Bands Based on Regions Region Bands Available North America Group (NAG) 2, 4, 5, 7, 12, 13, 14, 17, 30, 48 International 1, 2, 4, 5, 7, 20, 28, 38, 39, 40, 41 9.2 Wi-Fi Operation Wi-Fi is a registered trademark of Wi-Fi Alliance. You can set up and connect Wi-Fi network to update your radio firmware, codeplug, and resources such as language pack and voice announcement. Your radio supports Wi-Fi Enhanced Open,WEP,WPA/WPA2/WPA3-Personal and WPA/WPA2/WPA3-
Enterprise Wi-Fi networks. Wi-Fi Enhanced Open A new WFA security standard for public networks which provides encryption and privacy on open, non-password-protected networks in areas such as cafes, hotels and airports. WEP/WPA/WPA2/WPA3-Personal Wi-Fi network Uses pre-shared key/password based authentication. Pre-shared key/password can be entered by using the menu or MDM. WPA/WPA2/WPA3-Enterprise Wi-Fi network Designed for enterprise networks and requires a RADIUS authentication server. Your radio must be pre-configured with a certificate if certificate-based authentication is deployed and client certificate verification is required. 54 MN006217A01-AB Chapter 9: Connectivity Swipe up the home screen, tap Settings Network & internet Wi-Fi On. Your radio shows a list of available networks. 9.2.1 Turning Wi-Fi On or Off Turning Wi-Fi On Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Wi-Fi. Turning Wi-Fi Off Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Wi-Fi. 9.2.2 Accessing Network Procedure:
Swipe up the home screen, tap Settings Network & internet Wi-Fi Off. 1 Swipe up the home screen, tap Settings Network & internet Wi-Fi. 2 Perform one of the following actions:
Options Action Connecting to network Tap <required network> <password>. Adding new network a Tap Add network <required SSID> <preferred b To set the network configuration, tap and expand Advanced Security Type>. options and set accordingly. c Tap Save. Editing network Tap <required network>
<modify the network> Save. Settings Edit Forgetting network Tap <required network> Forget. Installing Enterprise Wifi Certificate Tap Advanced Install network certification. 55 MN006217A01-AB Chapter 9: Connectivity 9.3 Bluetooth This feature allows your radio to connect to any Bluetooth (BT)-enabled device through BT connection. Your radio supports BT connections to Commercially available Off-The-Shelf (COTS) headsets with HSP and HFP profiles as well as MSI BLE GATT accessories such as WM500 Corona RSM and EP910w PTT headset. Simultaneous connections to BT headsets are not supported. BT operates within a range of 10 m (32 ft) line of sight. The BT function of your radio has a maximum power of 2.5 mW (4 dBm) at the 10 m range. This is an unobstructed path between your radio and your BT-enabled device. For high degree of reliability, Motorola Solutions recommends to not separate the radio and the BT-enabled device. If the voice and tone quality gets distorted or unclear, position your radio and the BT-enabled device close to each other to re-establish clear audio reception. Swipe up the home screen, tap Settings Connect devices Connection preferences Bluetooth On. 9.3.1 Turning Bluetooth On or Off Turning Bluetooth On Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Bluetooth. Turning Bluetooth Off Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Bluetooth. 9.3.2 Connecting to Bluetooth Devices Procedure:
Swipe up the home screen, tap Settings Connect devices Connection preferences Bluetooth Off. 1 Swipe up the home screen, tap Settings Connected devices Connection preferences Bluetooth On. Your radio starts to search for nearby pairable devices. 2 Perform one of the following action:
To connect to an existing device, tap <required device> Connect. To connect to a new device, tap Pair new device <required device> Connect. 56 NOTICE: If the Bluetooth Pairing PIN feature is enabled, verify that the codes are correct before you begin pairing. MN006217A01-AB Chapter 9: Connectivity 9.3.3 Disconnecting from Bluetooth Devices Procedure:
Swipe up the home screen, tap preferences Bluetooth <required device> Disconnect. Settings Connected devices Connection Swipe up the home screen, tap View Details. Settings Connected devices <required device>
9.3.4 Viewing Device Details Procedure:
9.3.5 Editing Device Name Procedure:
Swipe up the home screen, tap Edit Name <New Name>. The display shows Device Name Saved. 9.3.6 Deleting Device Name Procedure:
Swipe up the home screen, tap Delete. The display shows Device Deleted. 9.3.7 Bluetooth Profiles Settings Connected devices <required device>
Settings Connected devices <required device>
Your radio supports a wide range of Bluetooth services. Table 25: Bluetooth Profiles Bluetooth Profile Description Generic Access Profile (GAP) This profile defines how Bluetooth-enabled de-
vices can make themselves available and how two devices can communicate directly with each other. 57 Bluetooth Profile Description MN006217A01-AB Chapter 9: Connectivity Generic Attribute Profile (GATT) Headset Profile (HSP) Personal Area Network (PAN) Allows profile discovery and description serv-
ices for Bluetooth Low Energy protocol. Provides support for the popular Bluetooth headsets to be used with mobile phones with ability to ring, answer a call, hang up, and ad-
just the volume. Allows the device to share Internet connection with another device (for example a laptop) and to access the Internet shared by another device
(for example a Bluetooth enabled phone). 58 MN006217A01-AB Basic Radio Operation Chapter 10 Basic Radio Operation This section explains the basic operation that you can perform on your radio. 10.1 Responding to Notifications Procedure:
1 Swipe down the notification panel and perform one of the following actions:
To respond to a notification, tap the assigned action message. To clear all notifications, tap Clear All. 2 To exit notification panel, swipe up. 10.2 Managing Home Screen Widgets Procedure:
Perform one of the following actions:
Options Actions Adding widgets to home screen a Tap and hold an empty space on the Moving widgets within home screen Moving widgets to the next screen a Tap and hold the <required widget>. home screen. b Tap widgets. c Tap and hold the <required widget>. d Drag the <required widget> to the
<required location>. a Tap and hold the <required widget>. b Drag the <required widget> to the
<required location>. b Drag the <required widget> to the right of the screen. c Release the <required widget> to the <required location>. Deleting widgets from home screen a Tap and hold the <required widget>. b Tap remove. 59 MN006217A01-AB Chapter 10: Basic Radio Operation 10.3 Zone and Channel Selections A zone is a group of channels. You can program each channel with different features that support different groups of users. Table 26: Number of Supported Zones and Channels Zones 250 Channels 1000 Channels per Zone 160 If there is a channel error, your radio displays the following error messages on the Radio Control Widget. Table 27: Channel Error Messages Type Description Unprogrammed The mode is set to an unprogrammed channel. Fail 001 The selected channel is assigned to an incorrect frequency band. 10.3.1 Selecting Zone Procedure:
Perform one of the following actions:
<required channel>. zone and channel>. channel>
10.3.2 Selecting Channel Procedure:
To select a zone, tap Radio Control Widget Current Zone <required zone>
To select a zone from Recent tab, tap Radio Control Widget Recent <required To search for zone, More Ch Search <required zone> <required Perform one of the following actions:
To select a channel, tap Radio Control Widget <required channel>. To select a channel from Recent tab, tap Radio Control Widget Recent <required zone and channel>. To search for channel, tap More Ch Search <required channel>
To select a channel using the Channel Selector knob, rotate the Channel Selector knob to the required position. 60 MN006217A01-AB Chapter 10: Basic Radio Operation 10.3.2.1 Channel Error Messages If there is a channel error, your radio displays the following error messages on the Radio Control Widget. Type Description Unprogrammed The mode is set to an unprogrammed channel. Fail 001 The selected channel is assigned to an incorrect frequency band. 10.4 Managing Mode Select Menus The Mode Select feature allows you to save the current zone and channel on your radio to one of the five Mode Select feature menus in the Menu Feature Launcher Widget. After that, the menus on the home screen function as shortcuts to the saved zone and channel. Prerequisites: Navigate to the zone and channel that you want to save. Procedure:
1 From the home screen, tap More. 2 Perform one of the following actions:
To save the current zone and channel to one of the Mode Select menus, tap and hold the required Mode Select menu. To change to the preset zone and channel of the Mode Select menu, tap Mode Select menu. 10.5 Talkaround This feature allows you to continue communicating when your repeater is non-operational, or when your radio is out of range from the repeater but within the talk range of other radios. The talkaround setting is retained even after powering down. 10.5.1 Toggling Between Repeater and Talkaround Mode Procedure:
Perform one of the following actions:
From the Radio Control Widget, tap Radio Quick Settings Repeater or Talkaround. From the Menu Feature Launcher Widget, tap More Repeater or Talkaround. Press the programmed Repeater or Talkaround button. 61 MN006217A01-AB Chapter 10: Basic Radio Operation 10.6 Power Level This feature allows you to reduce the transmit power level for a specific case that requires a lower power level. The reduced transmitted power level does not affect the receiving performance of your radio nor diminish the data functionality of the radio. Low power level enables a shorter transmitting distance and helps conserve power. High power level enables a longer transmitting distance. 10.6.1 Setting Power Level Procedure:
Perform one of the following actions:
10.7 Setting LED Indicator Procedure:
10.8 Setting Squelch Levels Procedure:
1 Perform one of the following actions:
From the Radio Control Widget, tap Radio Quick Settings Power. From the Menu Feature Launcher Widget, tap More Power. From the Menu Feature Launcher Widget, tap More LED Indicator. From the Radio Control Widget, tap Radio Quick Settings Squelch. From the Menu Feature Launcher Widget, tap More Squelch. 2 Perform one of the following actions:
For a normal squelch level, tap Normal. To filter out unwanted calls or background noise, tap Tight. 10.9 Toggling the Controls and Buttons Tones On or Off 1 From the home screen, tap More. Procedure:
62 2 To toggle the controls and buttons tones on or off, tap Tones. MN006217A01-AB Chapter 10: Basic Radio Operation 63 MN006217A01-AB Chapter 11: Types of Radio Calls Chapter 11 Types of Radio Calls Your radio can make different types of call. Open Voice Channel Mode (OVCM) Call Call Type All Call Broadcast Call Call Alert Group Call Private Call Selective Call Unaddressed Call 11.1 Making Calls Procedure:
64 To make calls, perform one of the following actions:
Description An All Call is a call from an individual radio to every radio on the site or every radio at a group of sites. All Call is used to make important an-
nouncement. A Broadcast Call is a one-way voice call from any user to an entire talkgroup. The Broadcast Call feature allows only the call initiating user to transmit to the talkgroup, while the recipients of the call cannot respond. Call Alert paging enables you to alert the recipi-
ent to call you back when they are able to do so. Call Alert is applicable for subscriber aliases or IDs only. A Group Call is a point-to-multipoint call opera-
tion. Your radio must be configured as a mem-
ber of the group for you to communicate with each other. An OVCM Call allows a radio that is not precon-
figured to work in a particular system to both re-
ceive and transmit during a group or individual call. A Private Call is a call from an individual radio to another individual radio. There are two types of Private call which are:
Off Air Call Set-Up (OACSU) Full Off Air Call Set-Up (FOACSU) A Selective Call is a call from an individual radio to another individual radio. It is a Private Call on an analog system. An Unaddressed Call is a group call to one of the 16 predefined group IDs. Option Action Making calls from Contact list Making calls using dialer Making calls from Recent calls Making calls using Channel Knob and PTT button MN006217A01-AB Chapter 11: Types of Radio Calls a From the home screen, tap Con-
tact <preferred contact>. b To start the call, tap PTT. c To end the call, tap End. a From the home screen, tap Con-
Floating Action Button b Enter the <preferred number>. c Tap More <preferred call tact Dialer. type>. d To start the call, tap PTT. e To end the call, tap End. a From the home screen, tap More Recent Calls <preferred contact> . b To start the call, tap PTT. c To end the call, tap End. a To select a channel with an active ID or alias, toggle the Channel Selector knob. b To call, press and hold the PTT button. c Wait for the Talk Permit Tone to end, and speak into the microphone. d To listen, release the PTT button. 11.2 Responding to Calls Procedure:
To respond to calls, perform one of the following action:
Option Accepting Call Denying Call Ending Call Action a Tap PTT. a Tap Dismiss. a When in call, tap End. 65 Emergency Operation Emergency Alarms are used to indicate critical situations. You can initiate an Emergency Alarm at any time even when there is activity on the current channel. You can only assign one type of Emergency Mode to the Emergency button for each zone. Your radio supports the following Emergency Modes:
MN006217A01-AB Chapter 12: Emergency Operation Chapter 12 Table 28: Emergency Modes Emergency Mode Emergency Alarm Emergency Alarm with Call Emergency Alarm with Voice to Follow Description An Emergency Alarm is not a voice call. This alarm is an emergency notification sent to ra-
dios that are programmed to receive them. Your radio transmits an Emergency Alarm. When the Emergency Alarm is acknowledged, the group of radios can communicate over the assigned emergency channel. You must press the PTT button to talk. Your radio transmits an Emergency Alarm. When the Emergency Alarm is acknowledged, your radio microphone is automatically activat-
ed which is known as Hot Mic. Hot Mic allows you to communicate with the group of radios without pressing the PTT button. NOTICE:
If the Emergency Cycle Mode is enabled, repetitions of Hot Mic and receiving period are made for a programmed duration. If you press the PTT button during the programmed receiving period, a prohibit tone sounds. This tone indicates that you must release the PTT button. The radio ignores the PTT button-press and remains in Emergency Mode. If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the Hot Mic directly. Silent Emergency Alarm Silent Emergency Alarm with Call Your radio transmits an emergency notification without any audio or visual indicators. Your radio transmits an emergency notification without any audio or visual indicators. Your ra-
dio suppresses all audio and visual indicators of 66 Emergency Mode Description Silent Emergency Alarm with Voice to Follow MN006217A01-AB Chapter 12: Emergency Operation the emergency until you press the PTT button to talk. Your radio transmits an emergency notification without any audio or visual indicators. When the Emergency Alarm is acknowledged, the Hot Mic is activated, allowing you to communicate with the group of radios without pressing the PTT button. NOTICE: The indicators only appear when you press the PTT button. NOTICE: Your dealer can set the Emergency On/Off function and button-press duration of the Emergency button. Contact your dealer for more information. If programmed, the Emergency Search tone sounds. This tone is muted when your radio transmits or receives voice, and stops when your radio exits Emergency mode. Your dealer can program the Emergency Search tone. If the alarm is unsuccessful after all retries are exhausted, your radio shows the following indications:
12.1 Sending Emergency Alarms Procedure:
Press the programmed Emergency On button. If the alarm is successfully sent, your radio shows the following indications:
The Emergency tone sounds. For Capacity Max, the green LED blinks. For Other Systems, the red LED blinks. The display shows Alarm Sent. A negative tone sounds. The display shows Alarm Failed. 12.2 Sending Emergency Alarms with Call Procedure:
1 Press the programmed Emergency On button. If the alarm is successfully sent, your radio shows the following indications:
The Emergency tone sounds. For Capacity Max, the green LED blinks. For Other Systems, the red LED blinks. The display shows Alarm Sent. 67 MN006217A01-AB Chapter 12: Emergency Operation 2 To call, press the PTT button. 3 Wait for the Talk Permit Tone to end, and speak into the microphone. 4 To listen, release the PTT button. If your radio does not detect voice activity for a predetermined period, the call ends. 12.3 Sending Emergency Alarms with Voice to Follow Procedure:
1 Press the programmed Emergency On button. If the alarm is successfully sent, the Emergency tone sounds and Hot Mic is activated. 2 Speak into the microphone without pressing the PTT button. Your radio automatically stops transmitting when:
The cycling duration between hot mic and receiving calls expires, if Emergency Cycle Mode is enabled. The hot mic duration expires, if Emergency Cycle Mode is disabled. 12.4 Receiving and Responding to Emergency When you receive an Emergency, your radio shows the following indications:
A tone sounds. The red LED blinks. The Emergency notification appears and is added to the Recent Calls. The display shows Emer Alarm Received and the ID of the sender. Procedure:
1 Perform one of the following actions:
To dimiss the Emergency, tap DISMISS on the notification. To view the Emergency details, tap More Recent Calls <preferred Emergency received>. To call back, tap More Recent Calls <preferred Emergency received>
PTT. NOTICE: If you receive an Emergency from a sender with a different zone or channel, the information in the Recent Calls will be grayed out and unable to call back. 12.5 Exiting Emergency Mode Your radio automatically exits emergency mode when you are having the following scenarios:
An acknowledgment is received from the system (for emergency alarms only). All retries to send the alarm are exhausted. 68 MN006217A01-AB Chapter 12: Emergency Operation Turning off your radio. When you turn on your radio, the emergency will not reinitiate automatically. Change your current channel to a channel with no Emergency. Procedure:
Press the programmed Emergency Off button. If you exited the Emergency successfully, your radio shows the following indications:
The tone ceased. The red LED extinguished. 69 MN006217A01-AB Chapter 13: Man Down Chapter 13 Man Down The Man Down feature enables your radio to alert others when you are in danger. If your radio tilts at a specified angle, is moving, or is stationary for a time, it prompts you with an Alert Tone. If you do not respond to the prompt before the predefined reminder timer expires, your radio automatically sends an Emergency Alarm or Emergency Call. To prevent your radio from sending an Emergency Alarm or Emergency Call, you can take the following measures:
For Tilt Alarm, you must restore the radio to the vertical position. For Movement Alarm, you must stop your radio from moving. For Anti-Movement Alarm, you must move your radio. If more than one Man Down Alarm is enabled, your radio plays the Alert Tone when it detects the first movement violation. NOTICE:
Man Down Alarms are not supported when operating in Fallback Mode. 13.1 Turning the Man Down Feature On or Off Turning the Man Down Feature On Procedure:
1 From the Radio Control Widget, tap Radio Quick Settings. 2 Toggle Man Down to on. Turning the Man Down Feature Off Procedure:
1 From the Radio Control Widget, tap Radio Quick Settings. 2 Toggle Man Down to off. 13.2 Exiting Man Down Procedure:
To exit Man Down, tap Cancel. 70 MN006217A01-AB Lone Worker Chapter 14 Lone Worker This feature prompts an emergency to be raised if there is no user activity, such as any radio button press or activation of the channel selector, for a predefined time. When there is no user activity for a predefined time, the radio pre-warns you using an audio indicator and on-screen notification on both front and top display once the inactivity timer expires. You can cancel the notification and the timer for lone worker resets. The wake up and sleep button, and touch interface do not reset the timer. If there is no acknowledgment from you before the predefined reminder timer expires, the radio initiates an emergency condition as programmed by the dealer. 71 MN006217A01-AB Chapter 15: Privacy Chapter 15 Privacy This feature helps to prevent eavesdropping by unauthorized users on a channel by the use of a software-based scrambling solution. The signaling and user identification portions of a transmission are clear. Your radio must have privacy enabled on the channel to send a privacy-enabled transmission, although this is not a requirement for receiving a transmission. While on a privacy-enabled channel, the radio is still able to receive clear transmissions. Some radio models may not offer Privacy feature, or may have different configuration. Check with your dealer for more information. NOTICE:
Only one type of privacy can be assigned at a time. This feature is not applicable in Citizens Band channels that are in the same frequency. The following describe the type of privacy and the settings that appear on your radio. Table 29: Privacy Types and Settings Type Symmetric Privacy Basic Privacy Enhanced Privacy Setting Sym Priv Privacy Enhanced Privacy To unscramble privacy-enabled call or data transmission, your radio must be programmed to have the same type of Privacy Key as the transmitting radio. If your radio receives a scrambled call that is of a different Privacy Key, you hear a garbled transmission. 15.1 Turning Privacy On or Off Procedure:
Perform one of the following actions:
From the Radio Control Widget, tap Radio Quick Settings Privacy. From the Menu Feature Launcher Widget, tap More Privacy. Press the programmed Privacy button. If privacy is turned on, your radio shows the following indications:
The top display momentarily shows PRIVACY ON. The secure icon appears in the top display and Radio Control Widget. If privacy is turned off, your radio shows the following indications:
3 Previously known as AES privacy. 72 The top display momentarily shows PRIVACY OFF. The secure icon disappears from the top display and Radio Control Widget. MN006217A01-AB Chapter 15: Privacy 73 MN006217A01-AB Chapter 16: Contacts Settings Chapter 16 Contacts Settings The Contacts Settings provides an address book function on your radio. Each entry corresponds to an ID for making calls. The entries are alphabetically sorted and different for analog and digital mode. Each entry depending on context (conventional or trunking), associates with one or up to five IDs according to the following types of calls:
Each entry within Contacts contains the following information:
Private Call Selective Call Call Alert Call Alias Call ID Call Type System ID 16.1 Contacts Icons Table 30: Contacts Icons Icon Description Missed Call Emergency Call Private Call Call Alert Dual Tone Multi-Frequency (DTMF) 16.2 Accessing Contact Settings Procedure:
1 From the home screen, tap Contact. 2 Perform one of the following actions:
74 Option Actions Viewing My Information Navigate to My Information section. MN006217A01-AB Chapter 16: Contacts Settings Accessing dialer Searching contacts Creating new contacts Viewing contact details Editing contacts Deleting contacts Assigning Favorite contact Tap Floating Action Button Dialer a Tap Search. b Enter the <required contact name>. a Tap Floating Action Button New Contact. b Enter the required <required contact name> and <required contact number>. c To change the tones, select the <
required ringtone> and
<required message alert>. d Tap Save. a Tap <required contact>. b To view the secondary information, tap down. a Tap <required contact>
More Edit Contact. b Make the required changes. NOTICE: In analog mode, you can only edit tones. c Tap Save. Tap <required contact>
Delete Contact. More Tap <required contact>
ite. Favor-
75 MN006217A01-AB Chapter 16: Contacts Settings 16.2.1 Quick Actions You can assign the following radio functions as Quick Action through the contact setting. Table 31: Assignable Radio Functions for Individual Contacts Icon Description Allows you to initiate Private Call to the required con-
tact. Allows you to send call alert to the required contact. Allows you to access the Text Message feature in Digi-
tal mode and MDC Message feature in Analog mode through the radio menu. Radio Check Allows you to check if the radio is active in the system. Radio Enable or Disable Allows a target radio to be remotely enabled or disa-
bled. Table 32: Assignable Radio Functions for Group Contacts Icon Description Name Call Call Alert Message Name Call Message Allows you to initiate Group Call to the required con-
tact. Allows you to access the Text Message feature in Digi-
tal mode and MDC Message feature in Analog mode through the radio menu. 16.2.1.1 Setting Quick Action Procedure:
1 From the home screen, tap Contact. 2 Navigate to the <required contact>. 3 Tap and hold the Quick Action icon. Call is the default Quick Action. 4 Perform one the follow actions:
Tap <preferred radio function>. Tap More <preferred radio function>. 76 MN006217A01-AB Chapter 16: Contacts Settings 16.2.1.2 Using Quick Action Procedure:
1 From the home screen, tap Contact. 2 Navigate to the <required contact>. 3 Tap the assigned Quick Action. If the Quick Action requires you to push the PTT button, the Quick Action icon turns blue. If the Quick Action does not requires you to push the PTT button, your radio launch the app for the assigned Quick Action. 77 MN006217A01-AB Chapter 17: SmartProgramming Chapter 17 SmartProgramming The SmartProgramming service enables radio programming and updates over LTE broadband connection while the radios are in use. Seamless updates of firmware (full and differential), radio configuration and security updates are scheduled by the radio system administrator and the radio user is given a choice to install immediately or delay for later. With SmartProgramming, you can apply a software feature to your radios on the go. Shortly after the purchase, the new software features license is loaded into RadioCentral and a provisioning job can be scheduled to enable the feature through LTE. Your radio service provider can also schedule a software update for your radio. When an update is available, your radio automatically downloads the update package. After the package is downloaded, you can install it immediately or later. You or your service provider can reset your radio to factory settings by using this feature. 78 LTE RadioCentral Firmware Radio Configuration Security Patch RadioCentral Client MN006217A01-AB Voice Operating Transmission Chapter 18 Voice Operating Transmission Voice Operating Transmission (VOX) allows you to initiate hands-free voice-activated calls on a programmed channel. When your VOX-capable accessory detects voice, your radio automatically transmits for a programmed period. Google Assistant and Voice Control are mutually exclusive with VOX. NOTICE:
VOX is unable to initiate hands-free voice-activated calls if your radio is connected to any Bluetooth accessories. This feature is not applicable in Citizen Band channels that are in the same frequency. Contact your dealer or administrator for more information to enable this feature. 18.1 Setting Voice Operating Transmission Procedure:
Perform one of the following actions:
From the Radio Control Widget, tap Radio Quick Settings VOX. From the Menu Feature Launcher Widget, tap More VOX. 79 MN006217A01-AB Chapter 19: Text Messaging Chapter 19 Text Messaging 19.1 Accessing Text Messages Procedure:
Perform one of the following actions:
Option Actions This feature allows you to quickly send and receive messages directly from your radios. The maximum length of a text message is 200 characters. Local date and time is time stamped on the messages. Viewing text mes-
sage From the home screen, tap conversation>. All Messages <preferred Tap Search <user input>. Searching for text message Sending text mes-
sage through con-
tact list Sending text mes-
sage through dia-
ler Creating a new message 80 a From the home screen, tap Contact <preferred contact> Message. b Compose the message and tap Send. a From the home screen, tap Contact Floating Ac-
tion Button Dialer. b Enter the required phone number, tap More Message Tap to Message. c Compose the message and tap Send. a From the home screen, tap All Messages Add or New Conversation. b Select your preferred contact or adding a new target. c Compose the message and tap Send. MN006217A01-AB Chapter 19: Text Messaging Option Actions Responding to text message with Quick Text Forwarding a message Copying a mes-
sage Deleting a single message a From the home screen, tap Contact <preferred contact> Message. b Press the programmed One Touch Message button. a From the home screen, tap All Messages <preferred conversation>. b Tap and hold the selected message, tap Forward
<preferred contact>
Send. a From the home screen, tap All Messages <preferred conversation>. b Tap and hold the selected message, tap Copy. c Tap and hold the input field, tap Paste. a From the home screen, tap All Messages <preferred conversation>. b Tap and hold the selected message, tap Delete Delete. 19.2 Setting Message Alert Tone Procedure:
1 From the home screen, tap Contact. 2 Tap <required contact>
More Edit Contact Message Alert. 3 Select the preferred message alert:
Repetitive Momentary 4 Tap Save. 81 This feature allows the administrator or other radio subscriber to put a radio into a non-functional state when the radio is missing or in an unknown hand. The radio stays in this state regardless of its power changes. The radio can only be uninhibited by receiving an uninhibited command from the administrator or other radio subscriber. MN006217A01-AB Chapter 20: Security Chapter 20 Security 20.1 Disabling Radio Procedure:
1 Perform one of the following actions:
Option Actions Disabling radio through contact list a From the home screen, tap Contact. b Tap <required contact>
More R. Disable. Disabling radio with Au-
thentication through contact list a From the home screen, tap Contact. b Tap <required contact>
More R. Disable
<authorized pin>
Save. NOTICE: Applicable to Conventional Digital only. Disabling radio through programmable feature button a Press the programmed Radio Disable button. b Tap <required contact>
down Disable. 20.2 Enabling Radio Procedure:
1 Perform one of the following actions:
Option Actions Enabling radio through contact list 82 a From the home screen, tap Contact. MN006217A01-AB Chapter 20: Security Option Actions b Tap <required contact>
More R. Enable. Enabling radio with Au-
thentication through contact list a From the home screen, tap Contact. b Tap <required contact>
More R. Enable
<authorized pin>
Save. NOTICE: Applicable to Conventional Digital only. Enabling radio through programmable feature button a Press the programmed Radio Enable button. b Tap <required contact>
down Enable. 83 MN006217A01-AB Chapter 21: Call Indicator Settings Chapter 21 Call Indicator Settings This feature allows you to configure call or text message ringing tones. 21.1 Assigning Ring Styles Procedure:
1 From the home screen, tap More Contacts <preferred contact>
More Edit Contact. 2 Perform one of the following actions:
To assign ringtone, tap Ringtone <preferred tone> OK Save. To assign message alert, tap Message Alert <preferred alert> OK Save. 84 MN006217A01-AB Recent Calls Chapter 22 Recent Calls You are able to view missed, answered, or outgoing private calls, call alerts, and emergency alerts in Recent Calls. In the list of recent calls, it is arranged in an ascending order of time with the most recents first. The list can store up to 50 recent calls and the oldest ones are deleted automatically. For recent calls that you have not visited, it will appear in a bold font. You can choose to initiate a call straight away from the recent calls screen by pressing the PTT button. The following shows the details from the Recent Calls screen:
Figure 7: Recent Calls Screen Table 33: Callout No. 1 2 3 Description Back to previous screen Dialed Number Timestamp 85 MN006217A01-AB Chapter 22: Recent Calls No. 4 5 6 Description Call Type Icon Call Type Delete options 22.1 Accessing Recent Calls Procedure:
1 From the home screen, tap More Recent Calls. 2 Perform one of the following actions:
To view recent calls, scroll through the list. To delete a selected contact, tap More Select to Delete <preferred contact>
Delete Delete. To delete all contacts, tap More Delete All Delete. To add new contacts, tap <preferred contact>
More Add to Contact
<contact information>
Save. To edit existing contact, tap <preferred contact>
More <updated information>
Save. To call the contact, tap <preferred contact> and press the PTT button. 86 MN006217A01-AB Call Queue When there are no resources available to process a call, Call Queue enables the call request to be placed in the system queue for the next available resources. Chapter 23 Call Queue 23.1 Receiving a Call Queue Procedure:
Press and hold the PTT button. A tone is heard and the top display shows Call in Queue. If receiving a Call Setup is successful, your radio shows the following indications:
A positive indicator tone sounds. The green LED blinks. The display shows the call type icon, ID or alias. You have up to 4 seconds to press and hold the PTT button to begin voice transmission. If receiving a Call Queue is unsuccessful, your radio shows the following indications:
A negative indicator tone sounds. The display shows the failure notice screen. Radio terminates the call and exit the call setup. 87 MN006217A01-AB Chapter 24: Priority Call Chapter 24 Priority Call Priority Call allows the system to preempt one of the ongoing non-priority calls and initiate the requested high priority call when all channels are busy. With all channels occupied with high priority calls, the system does not preempt any calls, and places the requesting high-priority call into call queue. If the system fails to place the requesting high-priority call into call queue, it declares failure. The default settings for Priority Call are preconfigured. When you use the following features, the call priority level reverts automatically to the preconfigured setting. All voice calls DMR Text Message/Text Message 24.1 Switching Priority Call Level Procedure:
Press the programmed Toggle Call Priority Level button. If High Priority is enabled, your radio shows the following indications:
The display shows Next Call: High Priority. The Call Priority High icon appears on the home screen. If Normal Priority is enabled, your radio shows the following indications:
The display shows Next Call: Normal Priority. The Call Priority High icon disappears on the home screen. 88 MN006217A01-AB Scan Chapter 25 Scan Depending on the supported system available on your radio, your radio may have different behaviour on Scan. Talkgroup Scan Talkgroup Scan is available for Capacity Max. When scan is enabled, your radio unmutes to any member in its Receive Group List. When scan is disabled, your radio does not receive transmission from any members of the Receive Group List, except for All Call, Permanent Talkgroup, and the selected Talkgroup. Channel Scan Channel Scan is available for Other Systems. Your radio scans through the programmed scan list for the current channel looking for voice activity when you start a scan. If you are on a digital channel, and your radio locks onto an analog channel, your radio automatically switches from digital mode to analog mode during the call and the same behaviour occurs if you are on a analog channel. Table 34: Scan Types Type Description Main Channel Scan (Manual) Your radio scans all the channels or groups in your scan list. When scanning, your radio may, depending on the settings, au-
tomatically start on the last scanned active channel or group, or on the channel where scan was initiated. Auto Scan (Automatic) Your radio automatically starts scanning when you select a chan-
nel or group that has Auto Scan enabled. NOTICE: If your radio joins a call for a Zone Scan List member from a different Zone and Call Hang Timer expires before you are able to respond, in order to respond, you must navigate to the Zone and Channel of the Scan List Member and start a new call. When you miss a call from a talkgroup or a channel that is in your scan list, you might be having the following situations:
Scan feature is not turned on. Scan list member has been disabled through the menu. You are already participating in a call. No member of the scanned group is registered at your multisite systems only. 4 4 Applicable to Capacity Max only. 89 MN006217A01-AB Chapter 25: Scan 25.1 Turning Scan On or Off Procedure:
Perform one of the following actions:
25.2 Scan Talkback Table 35: Scan Talkback Type Type Scan Talkback Disabled Scan Talkback Enabled From the Radio Control Widget, tap Radio Quick Settings Scan. From the Menu Feature Launcher Widget, tap More Scan. Press the programmed Scan button. If your radio scans into a call from the selectable group scan list, and if the PTT button is pressed during the scanned call, the operation of the radio depends on whether Scan Talkback was enabled or disabled during radio programming. Description During an ongoing scanned call, if the PTT but-
ton is pressed, the scanned call is terminated and a new call is launched. During an ongoing scanned call, if the PTT but-
ton is pressed, you can talkback to the scanned call. NOTICE:
If your call is scan into a channel that is not in your current zone and the call ends, switch your radio to the previously scanned zone and channel to talkback to the scan group. 25.3 Nuisance Channels Nuisance Channel is a channel that generates unwanted call continually. You can temporarily remove the unwanted channel from the scan list and restore it back later on. This capability does not apply to the channel designated as the Selected Channel. 25.3.1 Deleting Nuisance Channels Prerequisites: Your radio is scanned into the Nuisance Channel. Procedure:
1 Press the programmed Nuisance Delete button until you hear a tone. 2 Release the programmed Nuisance Delete button. The Nuisance Channel is deleted. 90 MN006217A01-AB Chapter 25: Scan 25.3.2 Restoring a Nuisance Channel Procedure:
Perform one of the following actions:
Cycle power your radio. Turn off and then turn on your scan. 25.4 Priority Monitor Priority Monitor allows your radio to receive transmission from talkgroups with higher priority during talkgroup call. This feature is only applicable to members in Receive Group List. Priority talkgroups are Priority 1 (P1) and Priority 2 (P2). Your radio receives transmission according to the following priority:
1 Emergency Call for P1 Talkgroup. 2 Emergency Call for P2 Talkgroup. 3 Emergency Call for non-priority Talkgroup in the Receive Group List. 4 All Call. 5 P1 Talkgroup Call. 6 P2 Talkgroup Call. 25.5 Receive Group List 7 Non-priority Talkgroup in the Receive Group List. Add or remove talkgroups. Add, remove, and edit priority for talkgroups. Add, remove, and edit affiliation talkgroups. Replace the existing scan list with a new scan list. Receive Group List allows you to create and assign members on the talkgroup scan list. You can have a maximum of 16 members in a list. When your radio is programmed to edit the scan list, you can perform the following actions:
If a talkgroup is programmed as Permanent Talkgroup, you are unable to edit the talkgroup from the scan list. 25.6 Scan Lists You can create and assign individual channels or groups in Scan Lists. Your radio scans for voice activity by cycling through the channel or group sequence specified in the scan list for the current channel or group. Your radio can support up to 250 scan lists, with a maximum of 16 members in a list. Each scan list supports a mixture of analog and digital entries. The Priority icon on the left of member ID indicates whether the member is on Priority 1 or Priority 2 channel list. There is no icon if the priority is set to None. 91 NOTICE: This feature is not applicable to Capacity Plus. MN006217A01-AB Chapter 25: Scan 25.6.1 Accessing Scan List Procedure:
1 From the Menu Feature Launcher Widget, tap Scan List or More Scan List. NOTICE: If the Scan List icon is grey out on the Menu Feature Launcher, you are unable to access the scan list. 2 Perform one of the following actions:
Option Actions Setting Active Scan List a Perform one of the following actions:
When there is no active scan list, tap View/Edit Scan List
<preferred scan list>. To change to a new active scan list, tap <current scan list> Set Active Scan List <preferred scan list>. Scroll through the list of members. a Select the required tab according to your systems. For Capacity Max, you can select the scan list members from Scan List or Talkgroup tab. For Other Systems, you can select the scan list members from Scan List or Channel tab. b Tap <preferred scan list member> <preferred priority>. NOTICE: If Priority 1 is not set, Priority 2 is grey out. Tap <preferred scan list member> <Remove from Scan>. Viewing Scan List Adding priori-
ties Deleting Scan List member Searching Scan List Tap Search <user input>. NOTICE: When the scan list is full, you are unable to add members into the list as it appears grey out. If the Scan List is empty, the Radio Control Widget shows Empty Scan List. 25.7 Flexible Receive List The Flexible Receive List feature allows you to create and assign members on the receive talkgroup list. Your radio can support a maximum of 16 members in the list. 92 MN006217A01-AB Chapter 25: Scan 25.7.1 Accessing Flexible Receive List Procedure:
1 From the Menu Feature Launcher Widget, tap Scan List or More Scan List. 2 On the Talkgroup tab, select the preferred member and perform one of the following actions:
To add member, tap Add Add to List To remove member, tap Scan List Remove from List 25.8 Multi-Talkgroup Affiliation Your radio can be configured for up to seven talkgroups at a site. Of the 16 talkgroups in the Receive Group List, up to seven talkgroups can be assigned as affiliation talkgroups. The selected talkgroup and the priority talkgroups are automatically affiliated. 25.8.1 Adding Talkgroup Affiliation Procedure:
25.8.2 Removing Talkgroup Affiliation Procedure:
From the Menu Feature Launcher Widget, tap Scan List or
<required Talkgroup> Add to List. More Talkgroup From the Menu Feature Launcher Widget, tap Scan List or
<required Talkgroup> Remove from List. More Talkgroup 93 MN006217A01-AB Chapter 26: Dynamic Caller Alias Chapter 26 Dynamic Caller Alias This feature allows you to dynamically edit a Caller Alias from your radio front panel. When in a call, the receiving radio displays the Caller Alias of the transmitting radio. The Caller Aliases list can store up to 500 Caller Aliases of transmitting radio. You can view or make Private Calls from the Caller Aliases list. When you turn off your radio, the history of receiving Caller Aliases is removed from the Caller Aliases list. 26.1 Editing Your Caller Alias Procedure:
Perform one of the following actions:
Option Actions Editing your Caller Alias when turning on the radio. a Turn on your radio. Editing your Caller Alias from Radio Info. b Enter your new <Caller Alias>. c Tap OK. a From the home screen, tap More Radio Info. My ID OK Edit . b Enter your new <Caller Alias>. The display shows a positive mini notice. NOTICE: When in a call, the receiving radio displays your new Caller Alias. 26.2 Viewing the Caller Aliases List You can access the Caller Aliases list to view the transmitting Caller Alias details. Procedure:
From the home screen, tap View Details. More Caller Aliases <Required Caller Alias>
94 MN006217A01-AB Chapter 26: Dynamic Caller Alias 26.3 Initiating Private Call From the Caller Aliases List You can access the Caller Aliases list to initiate Private Call. Procedure:
1 From the home screen, tap More Caller Aliases <required Caller Alias>. 2 To call, press and hold the PTT button. 95 MN006217A01-AB Chapter 27: Location Chapter 27 Location The Global Navigation Satellite System (GNSS) integrates information from the Global Positioning System (GPS) and the Global Navigation Satellite System (GLONASS) to determine the approximate geographical location of your radio. 27.1 Turning Location On or Off Turning Location On Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Location. Turning Location Off Procedure:
Perform one of the following actions:
Swipe down the notification panel, tap Location. Swipe up the home screen, tap Settings Location Use Location On. Swipe up the home screen, tap Settings Location Use Location Off. 27.2 Indoor Location You can use Indoor Location to keep track of the location of radio users. When Indoor Location is activated, the radio is in a limited discoverable mode. Dedicated beacons are used to locate the radio and determine its position. 27.2.1 Turning Indoor Location On or Off Prerequisites: Make sure Indoor Location is enabled in Customer Programming Software (CPS). Turning Indoor Location On Prerequisites: Make sure Bluetooth is turned on in your radio. Swipe up the home screen, tap Settings Location Beacon Indoor Location On. A message of Beacon Indoor Location enabled appears in the notification panel. Procedure:
96 MN006217A01-AB Chapter 27: Location Turning Indoor Location Off Procedure:
Perform one of the following action:
Swipe down the notification panel, tap Bluetooth to turn off. Swipe down the notification panel, tap Beacon Indoor Location enabled message Beacon Indoor Location Off. Swipe up the home screen, tap Settings Location Beacon Indoor Location Off. 97 MN006217A01-AB Chapter 28: Conventional Squelch Operation Chapter 28 Conventional Squelch Operation This feature filters out unwanted calls with low signal strength or channels that have a higher than normal background noise. Tone Private Line, Digital Private-Line, and carrier squelch is available (preprogrammed) per channel. Tone Private Line or Digital Private-Line The radio responds only to your messages. Result You hear all traffic on a channel. One or more of the following options may be preprogrammed in your radio. Contact your dealer or administrator for more information Option Result Digital Carrier-Operated Squelch You hear all digital traffic. You hear any digital traffic having the correct network access code. You hear any digital traffic having the correct network access code and correct talkgroup. Analog Options Option Carrier squelch Digital Options Normal Squelch Selective Switch 98 MN006217A01-AB Using the PL Defeat Feature Chapter 29 Using the PL Defeat Feature This feature allows you to override any coded squelch that preprogrammed to a channel. The radio also unmutes to any digital activity on a digital channel. When this feature is active, the Carrier Squelch status indicator is displayed. Procedure:
Place the preprogrammed PL Defeat switch in the PL Defeat position. One of the following occurs:
The radio plays the active transmission on the channel. If no activity is present, the radio is muted 99 MN006217A01-AB Chapter 30: Home Channel Reminder Chapter 30 Home Channel Reminder This feature provides a reminder when the radio is not set to the home channel for a while. If this feature is enabled by using the Customer Programming Software (CPS) and your radio is not set to the home channel for some time, the following indications occur periodically:
A tone and the Home Channel Reminder announcement sound. The top display shows NON HOME CH Your radio receive Non Home Channel notification. You can respond to the reminder by performing the following actions:
Return to the home channel. Mute the reminder temporarily. Set a new home channel. 30.1 Muting Home Channel Reminder When the Home Channel Reminder sound, you can temporarily mute the reminder. Procedure:
Tap Dismiss on the Non Home Channel notification. 30.2 Setting New Home Channel Procedure:
1 Tap Radio Control Widget. 2 Tap and hold the <required channel> until you hear a tone. 100 MN006217A01-AB Monitor Feature Chapter 31 Monitor Feature This feature allows you to ensure that a channel is free before transmitting. 31.1 Monitoring Channel Procedure:
1 Press and hold the programmed Monitor button. Your radio shows the following indications:
You hear the radio activity. The yellow LED illuminates. The display shows the Monitor icon. 2 To call, press and hold the PTT button. 3 To listen, release the PTT button. 31.2 Permanent Monitor 31.2.1 Turning the Permanent Monitor On Procedure:
Press and hold the programmed Permanent Monitor button. When your radio enters the mode, your radio shows the following indications:
An alert tone sounds. The display shows PERM MON ON and the Monitor icon. 31.2.2 Turning the Permanent Monitor Off Procedure:
Press and hold the programmed Permanent Monitor button. When your radio exits the mode, your radio shows the following indications:
An alert tone sounds. The display shows PERM MON OFF. The Permanent Monitor feature is used to continuously monitor a selected channel for activity. 101 MN006217A01-AB Chapter 32: Trunking System Control Chapter 32 Trunking System Control This feature allows your radio to communicate the trunking status when on a trunking channel Your radio can communicate different types of trunking statuses. Table 36: Types of Trunking System Status Types of Trunking System Status Description Out of Range When your radio goes out of the range, it can no longer lock onto a control channel. You hear a low-pitched tone, and or the dis-
play shows the currently selected zone or channel combination, and Out of range noti-
fication. Your radio remains in this out-of-
range condition until it locks onto a control channel, or if it is turned off. If the Zone Controller loses communication with any site, that site reverts to site trunk-
ing. When this occurs, you can communicate only with the radios within your trunking site. Your radio displays the current selected zone or channel, and the Site Trunking mes-
sage. Affiliation failed is when the radio is success-
fully locked and registered to a site, but fails to affiliate to Unified Knob Position (UKP) or P1 or P2. Your radio displays failed message, the site alias, and the UKP alias. Registration denied is when your radio regis-
tration is denied on a site. Your radio displays failed message and the UKP alias. Site Trunking Affiliation Failed Registration Denied 102 32.1 Viewing RSSI Value Procedure:
Press the 2-Dot Programmable Feature button five times. The top display shows the RSSI value. MN006217A01-AB Dynamic Group Number Assignment Chapter 33 Dynamic Group Number Assignment Dynamic Group Number Assignment (DGNA) is a feature, which allows the console to assign and remove a new talkgroup from your radio over the air. When the console assigns DGNA to your radio, your radio is in DGNA mode:
A tone sounds. The top display momentarily shows DGNA ASSGNED. The display momentarily shows <DGNA Talkgroup Alias> is assigned. The DGNA icon appears in the top display and Radio Control Widget. The top display and Radio Control Widget show DGNA talkgroup alias. When the console removes DGNA from your radio, your radio returns to the previous talkgroup:
A tone sounds. The top display momentarily shows DGNA REMOVED. The display momentarily shows <DGNA Talkgroup Alias> is removed. The DGNA icon disappears from the top display and Radio Control Widget. The top display and radio control widget show the previous talkgroup alias. Depending on how your radio is programmed, you can view, edit, and listen to the original scan lists channels and the non-DGNA talkgroups. When your radio is in DGNA mode, press and hold the PTT button allows you to communicate only with the current DGNA talkgroup. To communicate with the previous non-DGNA talkgroup, program the programmed One Touch Access button. NOTICE: Check with your dealer or system administrator to determine how your radio has been programmed. 33.1 Making DGNA Calls Prerequisites: Your radio is in DGNA mode. Procedure:
To call, press and hold the PTT button. Your radio shows the following indications:
A DGNA tone sounds. The DGNA icon appears in the top display and Radio Control Widget. The top display and Radio Control Widget show DGNA talkgroup alias. NOTICE: If your radio is not in DGNA mode and you press the programmed One Touch Access button, your radio sounds a negative tone, indicating error. The display remains unchanged. 103 MN006217A01-AB Chapter 33: Dynamic Group Number Assignment 33.2 Making Non-DGNA Calls Procedure:
Perform one of the following actions:
If Then If your radio is in DGNA mode, If your radio is not in DGNA mode, perform the following actions:
press the programmed One Touch Access button. a Press the programmed One Touch Ac-
cess button. b Before the negative tone sounds and your radio returns to the home screen, press and hold the PTT button. Your radio shows the following indications:
A positive tone sounds. Voice Announcement sounds. The top display and Radio Control Widget shows <Talkgroup Alias> and Press PTT momentarily. NOTICE:
If your radio is not in DGNA mode and you press the One Touch Access button, your radio sounds a negative tone, indicating error. The display remains unchanged. When your radio is in the home screen, a PTT press makes call to the DGNA talkgroup. 33.3 Receiving and Responding to DGNA Calls When you receive a DGNA call, your radio shows the following indications:
A DGNA tone sounds. The DGNA icon appears in the top display and Radio Control Widget. Your radio unmutes and the incoming call sounds through the speaker. Procedure:
1 To call, press and hold the PTT button. 2 To listen, release the PTT button. 104 MN006217A01-AB Auto Roaming Chapter 34 Auto Roaming Depending on your radio system, this feature allows your radio to roam to a required site. A multi-site channel has auto roaming capability when it is attached with a site search list. Your radio can roam to different sites through site search. Table 37: Types of Site Search Types of Site Search Description Passive Site Search (PassiveSS) When Site Lock is turned off, PassiveSS scans available sites and selects the strongest signal as current home. ActiveSS sends wakeup requests to the repeat-
er. Active Site Search (ActiveSS) 34.1 Turning Site Lock On or Off Turning Site Lock On Procedure:
1 From the Menu Feature Launcher Widget, tap More Roam. 2 Toggle Site Lock to on. Your radio locks the current site and stops auto roaming. The Roam icon disappears. Turning Site Lock Off Procedure:
1 From the Menu Feature Launcher Widget, tap More Roam. 2 Toggle Site Lock to on. Your radio enables auto roaming. The Roam icon appears. 105 MN006217A01-AB Chapter 34: Auto Roaming 34.2 Accessing Active Site Search Procedure:
From the Menu Feature Launcher Widget, tap More Roam Active Search. Your radio searches for a site. If a site is found, your radio displays a message with the site alias and updates the site alias onto Radio Control Widget. If a site is not found, your radio displays a temporary error message. 34.3 Accessing Current Site Information When and where to use: This feature is only available for Capacity Plus and Capacity Max systems. From the Menu Feature Launcher Widget, tap Lock. More Roam Current Site 34.4 Accessing Neighboring Site Information When and where to use: This feature is only available for Capacity Max system. From the Menu Feature Launcher Widget, tap Site Info. More Roam Neighbouring Procedure:
Procedure:
106 MN006217A01-AB Radio Check If enabled, this feature allows you to determine if another radio is active in a system without disturbing the user of that radio. No audible or visual notification is shown on the target radio. This feature is only applicable for subscriber IDs. Chapter 35 Radio Check 35.1 Sending Radio Check Procedure:
1 From the home screen, tap Contact. 2 Perform one of the following actions:
Option Actions Sending radio check through saved con-
tacts a Navigate to the <required contact>. b Tap and hold the Quick Action icon. Sending radio check through dialer c Tap More R. Check. a Tap Floating Action Button b Enter the <required contact Dialer. number>. c Tap More Radio Check. 107 MN006217A01-AB Chapter 36: Initiating Transmit Interrupt Chapter 36 Procedure:
Initiating Transmit Interrupt An ongoing call is interrupted, when you perform the following actions:
Press the PTT button. Press the Emergency button. For non Capacity Max, perform data transmission. For non Capacity Max, press the programmed TX Interrupt Remote Dekey button. The receiving radio displays CALL INTER. 108 MN006217A01-AB Auto-Range Transponder System Chapter 37 Auto-Range Transponder System The Auto-Range Transponder System (ARTS) is an analog-only feature designed to inform you when your radio is out-of-range of other ARTS-equipped radios. ARTS-equipped radios transmit or receive signals periodically to confirm that they are within range of each other. Your radio provides indications as follows:
Table 38: Auto-Range Transponder System Indications Indications First-Time Alert ARTS-in-Range Alert ARTS-Out-of-Range Alert Description A tone sounds. The display shows In Range after the channel alias. A tone sounds, if programmed. The display shows In Range after the channel alias. A tone sounds. The Red LED rapidly blinks. The display shows Out of Range alternat-
ing with the Home screen. 109 MN006217A01-AB Chapter 38: Applications Chapter 38 Applications This section contains information on applications available on your radio. You can access these applications through the Home Screen or swiping up from the bottom of the Home Screen to open Applications Menu window. Table 39: Appilcations Icon Name Description Calculator Allows you to perform basic and scientific arithmetic functions. Calendar Allows you to manage events and appointments. Camera Chrome Clock Contacts Drive Duo Files Gallery Gmail Google Keep Notes Maps Music Phone Photos Allows you to take photos and videos. Provides access to the Internet. Allows you to set an alarm, stopwatch, or timer. Allows you to manage contact information. Provides access to files anywhere through secure cloud storage and file backup for photos, videos, files and more. Allows you to make video calls. Allows you to view and manage files. Allows you to view photos or videos. Allows you to send and receive emails. Allows you to find what you need on the web and on your device. Allows you to create, store, and categorize notes, lists, reminders, images, audio, and many more. Allows you to use real-time GPS navigation and locate specific places. Allows you to play music. Allows you to make phone calls. Allows you to access Google smart gallery with unlimit-
ed photo and video storage. Messages Allows you to send and receive messages. 110 MN006217A01-AB Chapter 38: Applications Icon Name Description Play Movies and TV Play Store Allows you to stream movies and TV shows on Google Play. Allows you to search, download, and manage applica-
tions. Settings Provides settings to configure the device. Sound Recorder Allows you to record sounds. Videos WAVE Allows you to play and manage media files. Provides secure Push-to-Talk (PTT) service on the go. Youtube Allows you to watch videos and music. YouTube Music Allows you to listen to music. You can use the Camera application to take photos or record videos. 38.1 Camera 38.1.1 Taking Photos Procedure:
1 From the menu, tap Camera. 2 Perform one of the following actions:
Option Taking photos in normal mode Action a Tap Bar. Camera on Mode Selection Figure 8: Mode Selection Bar b If you want to change camera settings, tap Settings. c Frame the subject on your screen. 111 MN006217A01-AB Chapter 38: Applications Option Action Taking photos in panoramic mode d To zoom in or zoom out, press two fin-
gers on the display and pinch or expand fingers. The zoom controls appear on the screen. e To take photos, tap Camera. a Tap Bar. Camera on Mode Selection b Tap Panoramic. c To start, capture the photo from the left-
most edge of the image and move to-
wards the rightmost edge. d To stop capturing the photo, tap Stop. 38.1.2 Recording Videos Procedure:
1 From the menu, tap Camera. 2 Tap Video on Mode Selection Bar Figure 9: Mode Selection Bar 3 If you want to change video settings, tap Settings. 4 To start recording, tap Start Record. 5 To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen. 6 To stop recording, tap Stop Record. You can manage your albums, photos, or videos using the Gallery application. NOTICE: The device supports the following image formats: JPEG, GIF, PNG, HEICand BMP. 38.2 Gallery 112 MN006217A01-AB Chapter 38: Applications The Gallery application contains all albums, photos, and videos stored on the microSD card and in the internal memory. You can use Photos to perform the following actions:
View albums, photos, and videos Play videos Perform basic editing on albums, photos, and videos Set photos as a wallpaper Set photos as a contact photo Share photos and videos 38.2.1 Viewing and Browsing in Gallery Procedure:
1 From the menu, tap Gallery. 2 Perform one of the following actions:
Tap an album of your choice. Tap a photo. To view the next or previous photo in the album, swipe left or right. To view controls, tap a photo. To zoom in or zoom out, double tap or press two fingers on the display and pinch or expand fingers on a photo. To view parts that are not in view, drag the photo. 2 To share items, tap <required item>
Share <required application>. 38.2.2 Sharing Items from Photos Procedure:
1 From the menu, tap Gallery. 38.2.3 Deleting Items from Gallery Procedure:
1 From the menu, tap Gallery. 2 To delete items, tap <required item>
Delete OK. 113 MN006217A01-AB Chapter 38: Applications 38.2.4 Cropping Photos Procedure:
2 To crop photos, tap <required photo>
Edit Crop. 1 From the menu, tap Gallery. The cropping grid appears. 3 Perform one of the following actions:
Option Actions Cropping the photo manually Choosing automatic cropping dimen-
sions a To select the portion of the photo to crop, adjust the endpoints. a Tap 1:1. Original. b If you want to view the original photo, tap 4 To confirm, tap Yes. 5 To save, tap SAVE. 38.2.5 Rotating Photos Procedure:
1 From the menu, tap Gallery. 3 Tap SAVE to confirm. 38.2.6 Watching Videos Procedure:
1 From the menu, tap Gallery. 114 2 To rotate photos, tap <required photo>
Edit Crop Rotate The photo rotates to 90 clockwise. Each tap rotates the photo to another 90. 2 To watch videos, tap Videos <required video>
Play <required application>. 3 To see the video playback or continue where you left off last time, drag the video progress bar. 4 To return to the previous screen, tap Back. MN006217A01-AB Chapter 38: Applications 38.3 Scanning Barcode or QR Code Procedure:
1 From the menu, tap Asset Tracking Application Asset Tracker Shown. 2 Press the programmed Scanner button. The barcode or QR code is captured and populated in the text field. 1 To open Quick Settings panel, swipe down the Status bar from the screen. 38.4 Turning On the Flash Light Procedure:
2 To turn on the flash light, tap Torch. 38.5 Managing Downloads Procedure:
1 From the menu, tap Files. You can download, install, view applications, and media files when your radio is connected to the Internet through Wi-Fi or network service provider. 2 Tap Menu Files <required file type>. 3 Perform one of the following actions:
Option Actions Sharing downloaded item a Tap and hold the <required item>. b To share the downloaded item, tap Share Share via
<required application>. Deleting downloaded item a Tap and hold the <required item>. b To delete, tap Delete OK. 38.6 Exploring Files Procedure:
You can view, edit, or create files using the the File Manager application. 1 From the menu, tap Files. The main screen appears and displays the storage available on your device. 115 MN006217A01-AB Chapter 38: Applications 2 Tap <required file>. 3 To do more actions on files, tap the three dots on the bottom-left corner of the screen. 4 Select one of the following options:
To view the properties of the selected folder or file, tap Properties. To refresh the application, tap Refresh. To create new folder, tap New folder. To create new file, tap New file. To select all of the folder or files in file manager, tap Select all. To deselect all of the folder or files in file manager, tap Deselect all. To delete the selected folder or file, tap Delete Selection. To add the folder or file to bookmark, tap Add to bookmarks. To add the folder or file as shortcut to the Home screen, tap Add shortcut. 116 MN006217A01-AB Authorized Accessories List Chapter 39 Authorized Accessories List Motorola Solutions provides approved accessories to improve the productivity of your radio. See MN006920A01 to know more about the accessories supported by your radio. For more information visit https://learning.motorolasolutions.com. 117 MN006217A01-AB Legal and Compliance Statements Legal and Compliance Statements Supplier's Declaration of Conformity Supplier's Declaration of Conformity Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola Solutions, Inc. Address: 2000 Progress Pkwy, Schaumburg, IL. 60196 Phone Number: 1-800-927-2744 Hereby declares that the product:
Model Name: MSLB-MKZ900 conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d), and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause unde-
sired operation. NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the re-
ceiver is connected. Consult the dealer or an experienced radio or TV technician for help. For country code selection usage (WLAN devices) 118 MN006217A01-AB Legal and Compliance Statements NOTICE: The country code selection is for non-US model only and is not available to all US models. Per FCC regulation, all Wi-Fi products marketed in the US must be fixed to US operation channels only. Industry Canada WLAN Statement CAUTION:
1 The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. 2 The maximum antenna gain permitted for devices in the bands 52505350 MHz and 5470 5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. 3 The maximum antenna gain permitted for devices in the band 57525850 MHz shall be such that the equipment still complies with e.i.r.p. limits specified for point-to-point and non-point-
to-point operation as appropriate. 4 The worst case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2 (3) shall be clearly indicated. 5 User should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 52505350 MHz and 56505850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Notice to Users (FCC) This device complies with Part 15 of the FCC rules per the following conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device, not expressly approved by Motorola Solutions, could void the authority of the user to operate this equipment. Notice to Users (Industry Canada) The operation of your Motorola Solutions radio is subject to the Radiocommunications Act and must comply with rules and regulations of the Federal Governments department of Industry Canada. Industry Canada requires that all operators using Private Land Mobile frequencies obtain a radio license before operating their equipment. Disclaimer Please note that certain features, facilities, and capabilities described in this document may not be applicable to or licensed for use on a specific system, or may be dependent upon the characteristics of a specific subscriber unit or configuration of certain parameters. Please refer to your Motorola Solutions contact for further information. Computer Software Copyrights The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Motorola Solutions computer programs 119 MN006217A01-AB Legal and Compliance Statements contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola Solutions, except for the normal non-exclusive license to use that arises by operation of law in the sale of a product. Copyrights and Trademarks 2020 Motorola Solutions, Inc. All Rights Reserved The Motorola Solutions products described in this document may include copyrighted Motorola Solutions computer programs. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola Solutions. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product. Trademarks MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. Open Source Software This Motorola Solutions product described in this document may contain Open Source Software. For information regarding the Open Source Software copyrights, attributions, licensing, and usage terms refer to:
Important Safety Information RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios CAUTION:
This radio is restricted to Occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations. Any modification to this device, not expressly authorized by Motorola Solutions, may void the user's authority to operate this device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. 120 MN006217A01-AB Legal and Compliance Statements This radio transmitter has been approved by Industry Canada to operate with Motorola Solutions-
approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. 121 MN006217A01-AB Batteries and Chargers Warranty Batteries and Chargers Warranty The Workmanship Warranty The workmanship warranty guarantees against defects in workmanship under normal use and service. All MOTOTRBO Batteries IMPRES Chargers (Single-Unit and Multi-Unit, Non-Display) IMPRES Chargers (Multi-Unit with Display) The Capacity Warranty Nickel Metal-Hydride (NiMH) or Lithium-Ion (Li-
lon) Batteries IMPRES Batteries, When Used Exclusively with IMPRES Chargers 24 Months 24 Months 12 Months 12 Months 18 Months The capacity warranty guarantees 80% of the rated capacity for the warranty duration. 122 MN006217A01-AB Limited Warranty Limited Warranty MOTOROLA SOLUTIONS COMMUNICATION PRODUCTS I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
Motorola Solutions, Inc. ("Motorola Solutions") warrants the Motorola Solutions manufactured Communication Products listed below ("Product") against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
Portable Radios Product Accessories Two (2) Years One (1) Year Motorola Solutions, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original applicable warranty period. All replaced parts of Product shall become the property of Motorola Solutions. This express limited warranty is extended by Motorola Solutions to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by Motorola Solutions. Motorola Solutions assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola Solutions. Unless made in a separate agreement between Motorola Solutions and the original end user purchaser, Motorola Solutions does not warrant the installation, maintenance or service of the Product. Motorola Solutions cannot be responsible in any way for any ancillary equipment not furnished by Motorola Solutions which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique, Motorola Solutions disclaims liability for range, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS This warranty sets forth the full extent of Motorola Solutions responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at Motorola Solutions option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL MOTOROLA SOLUTIONS BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY. 123 MN006217A01-AB Limited Warranty This warranty gives specific legal rights, and there may be other rights which may vary from state to state. IV. HOW TO GET WARRANTY SERVICE You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by Motorola Solutions through one of its authorized warranty service locations. If you first contact the company which sold you the Product (for example, dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call Motorola Solutions at 1-800-927-2744. V. WHAT THIS WARRANTY DOES NOT COVER 1 Defects or damage resulting from use of the Product in other than its normal and customary manner. 2 Defects or damage from misuse, accident, water, or neglect. 3 Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. 4 Breakage or damage to antennas unless caused directly by defects in material workmanship. 5 A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-Motorola Solutions supplied equipment) which adversely affect performance of the Product or interfere with Motorola Solutions normal warranty inspection and testing of the Product to verify any warranty claim. 6 Product which has had the serial number removed or made illegible. 7 Rechargeable batteries if:
any of the seals on the battery enclosure of cells are broken or show evidence of tampering. the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified. 8 Freight costs to the repair depot. 9 A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorola Solutions published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from Motorola Solutions. 10 Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the Product. 11 Normal and customary wear and tear. VI. PATENT AND SOFTWARE PROVISIONS Motorola Solutions will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola Solutions will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
1 Motorola Solutions will be notified promptly in writing by such purchaser of any notice of such claim, 2 Motorola Solutions will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and 124 MN006217A01-AB Limited Warranty 3 Should the Product or parts become, or in Motorola Solutions opinion be likely to become, the subject of a claim of infringement of a United States patent, that such purchaser will permit Motorola Solutions, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by Motorola Solutions. Motorola Solutions will have no liability with respect to any claim of patent infringement which is based upon the combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by Motorola Solutions, nor will Motorola Solutions have any liability for the use of ancillary equipment or software not furnished by Motorola Solutions which is attached to or used in connection with the Product. The foregoing states the entire liability of Motorola Solutions with respect to infringement of patents by the Product or any parts thereof. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted Motorola Solutions software such as the exclusive rights to reproduce in copies and distribute copies of such Motorola Solutions software. Motorola Solutions software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such Motorola Solutions software or exercise of rights in such Motorola Solutions software is permitted. No license is granted by implication, estoppel or otherwise under Motorola Solutions patent rights or copyrights. VII. GOVERNING LAW This Warranty is governed by the laws of the State of Illinois, U.S.A. VIII. For Australia Only This warranty is given by Motorola Solutions Australia Pty Limited (ABN 16 004 742 312) of Tally Ho Business Park, 10 Wesley Court. Burwood East, Victoria. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Motorola Solutions Australia's limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website: http://www.motorolasolutions.com/XA-EN/
Pages/Contact_Us for the most updated warranty terms. 125 MN006217A01-AB Dclarations juridiques et de conformit Dclarations juridiques et de conformit Dclaration de conformit du fournisseur Dclaration de conformit du fournisseur Rglement CFR 47, partie 2, section 2.1077(a) de la FCC Partie responsable Nom : Motorola Solutions, Inc. Adresse : 2000 Progress Pkwy, Schaumburg, IL. 60196 Numro de tlphone : 1 800 927-2744 Dclare par les prsentes que le produit :
Nom du modle : MSLB-MKZ900 est conforme aux rglementations suivantes :
Partie 15, sous-partie B, section 15.107(a), 15.107(d) et section 15.109(a) des rglements de la FCC. Appareil numrique de classe B En tant que priphrique dordinateur personnel, cet appareil est conforme aux dispositions de la partie 15 des rglements de la FCC. Son utilisation est assujettie aux deux conditions suivantes :
1 Cet appareil ne doit pas causer dinterfrence nuisible, et 2 Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. MN006217A01-AB Dclarations juridiques et de conformit AVIS:
Cet quipement a fait lobjet de tests et a t dclar conforme aux limites tablies pour un appareil numrique de classe B, conformment la section 15 des rglements de la FCC. Ces limites sont fixes afin doffrir une protection suffisante contre des interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence et, sil nest pas install ou utilis conformment aux instructions, il peut provoquer un brouillage nuisible aux communications radio. Cependant, il est impossible de garantir quil ny aura aucune interfrence dans une installation particulire. Si cet appareil cause une interfrence nuisible la rception de la radio ou de la tlvision, ce qui peut tre dtermin en teignant et en allumant lappareil, lutilisateur est encourag remdier la situation en prenant lune ou plusieurs des mesures suivantes :
Rorienter ou dplacer lantenne rceptrice. Augmenter la distance entre lquipement et le rcepteur. Brancher lappareil dans une autre prise sur un circuit diffrent de celui du rcepteur. Consulter le dtaillant ou un technicien de radio ou de tlvision qualifi pour obtenir de laide. Pour un usage en fonction de la slection du code de pays (appareils WLAN) AVIS:
La slection du code de pays est pour les modles non amricains seulement et nest pas disponible sur tous les modles amricains. Conformment la rglementation de la FCC, tous les produits Wi-Fi commercialiss aux tats-Unis doivent tre fixs sur des canaux fonctionnant aux tats-Unis uniquement. Dclaration relative au WLAN (Industrie Canada) MISE EN GARDE:
1 Lappareil fonctionnant dans la bande 5 150 5 250 MHz est uniquement destin une utilisation lintrieur afin de limiter les risques dinterfrences avec les systmes mobiles satellites dans un canal commun. 2 Pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis pour les dispositifs utilisant les bandes de 5 250 5 350 MHz et de 5 470 5 725 MHz doit tre conforme la limite de puissance isotrope rayonne quivalente (p.i.r.e). 3 Pour les dispositifs munis dantennes amovibles, le gain maximal dantenne permis pour les dispositifs utilisant la bande de 5 752 5 850 MHz doit tre conforme la limite de p.i.r.e spcifie pour lexploitation point point et lexploitation non point point, selon le cas. 4 Les pires angles dinclinaison ncessaires pour rester conforme lexigence de p.i.r.e applicable au masque dlvation, et nonce la section 6.2.2 (3), doivent tre clairement indiqus. 5 Les utilisateurs devraient aussi tre aviss, dune part, que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) des bandes de 5 250 5 350 MHz et de 5 650 5 850 MHz et, dautre part, que ces radars pourraient causer du brouillage ou des dommages aux dispositifs de RL-EL. MN006217A01-AB Dclarations juridiques et de conformit Avis aux utilisateurs (FCC) Cet appareil est conforme la partie 15 des rglements de la FCC daprs les conditions suivantes : s Cet appareil ne doit pas causer dinterfrence nuisible. Cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Toute modification apporte cet appareil sans lautorisation explicite de Motorola Solutions peut annuler lautorisation dutiliser cet appareil. Avis aux utilisateurs (Industrie Canada) Le fonctionnement de votre radio Motorola Solutions est assujetti la Loi sur la radiocommunication et doit se conformer aux rgles et rglements du ministre Innovation, Sciences et Dveloppement conomique Canada du gouvernement fdral. Industrie Canada exige que les utilisateurs de frquences mobiles terrestres prives obtiennent une licence avant dutiliser leur quipement.