|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2019-09-27
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
HP Inc.
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0025126541
|
|
1 2 3 4 5
|
Physical Address |
3390 East Harmony Road
|
|
1 2 3 4 5
|
Fort Collins
|
|
1 2 3 4 5
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4 5
|
TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5
|
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
B94
|
|
1 2 3 4 5
|
Equipment Product Code |
HNQ20PDCP2
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
R**** P**** T****
|
|
1 2 3 4 5
|
Title |
US Canada Technical Regulations
|
|
1 2 3 4 5
|
Telephone Number |
970-8********
|
|
1 2 3 4 5
|
Fax Number |
000-0********
|
|
1 2 3 4 5
|
E-mail |
r******@hp.com
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
HP Inc.
|
|
1 2 3 4 5
|
Name |
J****** C****
|
|
1 2 3 4 5
|
Physical Address |
1501 Page Mill Road
|
|
1 2 3 4 5
|
Palo Alto, California 94304
|
|
1 2 3 4 5
|
Palo Alto, 94304
|
|
1 2 3 4 5
|
United States
|
|
1 2 3 4 5
|
Telephone Number |
27192********
|
|
1 2 3 4 5
|
E-mail |
j******@hp.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/25/2020 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 | DTS - Digital Transmission System |
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 | PCB - PCS Licensed Transmitter |
| 1 2 3 4 5 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Model HSN-Q20C PC |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
| 1 2 3 4 5 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Original Equipment |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 | Grant Comments | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels
as shown in filings under this FCC ID. Limited Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. This module is approved in
mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator
to determine applicable host configurations to ensure RF exposure compliance, including
simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either
2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. This device has 20 and 40 MHz bandwidth modes. The highest reported Body and
Simultaneous SAR values are 0.66W/kg and 1.32W/kg respectively.
SAR testing was performed to demonstrate mobile/portable RF compliance. |
| 1 2 3 4 5 | Power Output listed is conducted. Limited Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)
tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08W/kg and 1.32W/kg respectively.
SAR testing was performed to demonstrate mobile/portable RF compliance. |
| 1 2 3 4 5 | Limited Modular Approval. Output power is ERP for Part 22, Part 27(Below 1 GHz) and Part 90; EIRP for Part 24
and Part 27 (Above 1 GHz). This grant is valid only when the module is sold to OEM integrator and must be
installed by the OEM or OEM integrator. The antennas used for this transmitter as shown in this filing must be
installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation
instructions.OEM integrator and end-users must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.32W/kg respectively.
SAR Testing was performed to demonstrate mobile/portable RF compliance. |
| 1 2 3 4 5 | Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation.
When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz
bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating conditions
to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.32W/kg respectively.
SAR testing was performed to demonstrate mobile/portable RF compliance. |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
RF Exposure Lab, LLC
|
|
1 2 3 4 5
|
Name |
T**** M****
|
|
1 2 3 4 5
|
Telephone Number |
760 4********
|
|
1 2 3 4 5
|
E-mail |
t******@rfexposurelab.com
|
|