FCC ID: B94HNQ20PDCP2 Model HSN-Q20C PC

HP Product Name Model XXX XXX Prod. XXXXXXX SSN 000000K 0 Waaranty tytyoy HP Product Name L-@

Pro KX }-@

sus xaoooen00% =a -6) venanty iyi QL HDMI 7 CORE, IAB ABRHRE CT. CORE, REREAD FSCERBNELTHETHM, CORBY DIAP TLE Say SRM STELCEASHS&, MERBESSHCT OEM HVET. WDGRRAAR ICH TELU RU BUELT RSL. VCCI-B COREG. CIABMETS. CORES. HER CRATSCCe AN CLTVETA, TCORBMIVAPTLEV ay Saw CHAIN Bc, SEMEL CTTEMBVET, EXIR EAA (CHE CIELU RU RUALT RSL vcciB COPEL, ET REMA AERA E ILL BRB SU fe a RRL CED HAAR AS aS FAA 7} AEA 7S JO] NOMS ly oka a} heal el AMAT A+ WG HALE Ao]

AA 59] Ue BT) 7pm AL AA) Se APES YS, ws AYA AA eo] AL-BShO] 2h] 9} & Abo] of 2.5em o] AES] 7]

YS Taare. 5.25G~5.35G Batti PUBL E ZR SRST A (AE TS ESR EY SET BB AE ERE

(SRL EE SRA, tle FOUR ROMS UErE GTS ZU PEN AES > FERS A] > 25] +

PSEC FLAS HS SESS HARE at ZEIGE

(FALE (AA ZS RAB fa > ASABE > REBAR > We SEE 77 PSE A=

AIT GZGES > TRIKFR(SESLE (ER 2 AR AS (8 DR BAE 2 GSES CT SS > BEER EE SERS PE PEREZ HE CLASS 1 LASER PRODUCT systems age! re ad crs {130 Arr Panay Ne en age ty Sown es ante com Suppliers Declaration of Conformity Reference Number. Delphi 40 (revision AMS) Place of issue: Allentown, PA, USA Date of issue: 30" Novernber 2006 Agere Systems Inc. at 1110 American Parkway NE, Lehigh Valley Central Campus, Allentown, PA 18109 inthe United States of America, hereby certifies thatthe Modem, bearing labeling identification number US: AGSMDO{BDELPH complies with the Federal Communications Commission's CFCC") Rules and Regulations 47 CFR Pert 68, and the Administrative Council on Terminal Attachments (ACTA}adopted technical criteria TIAEIANS-968, 968-8, 968-A-1, 968A-2 and 968-A3 Telecommunications ~ Telephone Terminal Equpment Technical Requirements for Connection of Terminal Equipment To the Telephone Network Brad Grand Technical Manager mmm A05-0413001 5s mame 4070107003 Lae OCH CR EAR EEO OE A CMR ALU SHE) ASS AMS J Cou SHH] EID URE eo, HP LAP Sa te Se Pa

(FARA RORAMEL, ATORLRORS, HERBERT HR 1 faEranen. SOHAL RA, AP RRRRE 220V if. 2 BRBMMLS OI, AMR TILE ABAD ENITIT. 3 BRELGL. PRELIM. MAT. RAUBER. 4. FEB RORAE ALA, CRAP. 5. RENO TLS ME. a Hy Wh Ae ee a RE a Oe AA ROR LS REM T AM, MTR CM RR. LT FLAIR: hip://wwwehp.com.en eR pL BA RAS Sit: ACAD 112 Soh AA iE. 010-65643888 a EXECU) BACs Oa RSA RASTA ( SiCAAN ) HEIRS , BS SIS http://www8. hp.com/us/en/hp-information/environment/product-recycling-html AHURA (il Bit SL BER SATIRE AL )) ROBE OTHE MATIA, KEM TIRH MAVERMS SO AL AE RU FEAI m8 RHE (MBit BAKER EE RAEMSM)) ( GB28380-2012) ME RKRE. WEAPMAN BAIA T:

1. RERCER ORL SALA Beek SR ch ARH DTH PEE PU RE REA AE. OMT LAE ER ASE HEWIH PERI RAE Pe HE PBT RA SEDAN FE (FY) 1 2 3 Bey AX 98.0+5Efa 148.0+5Efa 198.0+5Efa THR tkbL Bx 125.0+ZEfa 175.0+5Efa 225,0+ZEfa cx 159.0+ZEfa 209.0+5Efa 259.0+ZEfa px 184,0+ZEfa 234.0+5Efa 284,0+ZEfa ett AX 20.0+5Efa 35.0+ZEfa 45.0+5Efa it OL BR 26.0+ZEfa 45.0+5Efa 65.0+3Efa cx 54.5+5Efa 75.0+5Efa 123.5+S3Efa TE : DEfa 29 A LO He A RE 2 fo 2. UH HERUN FE SHE RE PEE (CR BEY, FE CCR TLE SARIR SE ALM) BORAT (RAE HLS T anA BB, AC, ALAS REICH PEE BY Be 5: HPT MS RETR Py EDR FER, 3. Fanaa Fr FS A A Tt HL ic LTE, BLP Xe:

Ra REA BHR LR PEEL EP ROL AX FSB, CH, DAML FB AS, C PSALMS TEST FEEL TRL RL BR HAE (CPU) Poe es 2, ABA RAs BAS are (GPU) KFS 26GB c# TRADERS (CPU) JOHOR 2, HAS FRRLEERE (CPU) HBR AT HEE 2, DEAE REP HS ABAEAT SF 26GB, AA A GPU. RPL ATS 128 fit. a. a) RIVERT BY 268 ; oe GPW) ERNE SS b. thy RSC (GPU) pe PIRNEESE (CPU) POEL ODMAT SEF 4, HEDRALYA PRHEHH& :

a RRATEAT SF 4GB :

b. RARER (GPU) ASE

(LK FSF 128 fic KFRPRAAN ANEMIA, BSS (HOM LAER IR ER HEE) (GB28380-2012) 2008 42, HAICBIT SWEAR, IISCOMOMARAVELE, MHRA, 2006 447 A 1 A LAREICIRZES SER + EPROP ELEM AO SAIC SE LCR BBA IT ONE Lik, MAOMHRARICHS ELT http://www.hp.com/go/jisc0950 RBIRLTCEEW Athird-party certification according to ISO 14024 Ia Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. And Last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly. Want to know more?

Read information about TCO Certified, Full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. Athird-party certification according to ISO 14024 Toward sustainable IT products z Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations occur in the supply chain. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products. Additionally, it fulfills the requirements of TCO Certified Edge, the supplemental certification that recognizes leading-edge Products that exceed typical performance in a particular sustainability attribute. At our Product Finder (tcocertified.com/product-finder) you can find out which TCO Certified Edge criterion or criteria this product meets. Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Compliance is verified by independent verification organizations that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Want to know more?

Read information about TCO Certified, Full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. CORE, IAB ABRHRE CT. CORE, REREAD FSCERBNELTHETHM, CORBY DIAP TLE Say SRM STELCEASHS&, MERBESSHCT OEM HVET. WDGRRAAR ICH TELU RU BUELT RSL. VCCI-B COREG. CIABMETS. CORES. HER CRATSCCe AN CLTVETA, TCORBMIVAPTLEV ay Saw CHAIN Bc, SEMEL CTTEMBVET, EXIR EAA (CHE CIELU RU RUALT RSL vcciB COPEL, ET REMA AERA E ILL BRB SU fe a RRL CED HAAR AS aS FAA 7} AEA 7S JO] NOMS ly oka a} heal el AMAT A+ WG HALE Ao]

AA 59] Ue BT) 7pm AL AA) Se APES YS, ws AYA AA eo] AL-BShO] 2h] 9} & Abo] of 2.5em o] AES] 7]

YS Taare. 5.25G~5.35G Batti PUBL E ZR SRST A (AE TS ESR EY SET BB AE ERE

(SRL EE SRA, tle FOUR ROMS UErE GTS ZU PEN AES > FERS A] > 25] +

PSEC FLAS HS SESS HARE at ZEIGE

(FALE (AA ZS RAB fa > ASABE > REBAR > We SEE 77 PSE A=

AIT GZGES > TRIKFR(SESLE (ER 2 AR AS (8 DR BAE 2 GSES CT SS > BEER EE SERS PE PEREZ HE CLASS 1 LASER PRODUCT systems age! re ad crs {130 Arr Panay Ne en age ty Sown es ante com Suppliers Declaration of Conformity Reference Number. Delphi 40 (revision AMS) Place of issue: Allentown, PA, USA Date of issue: 30" Novernber 2006 Agere Systems Inc. at 1110 American Parkway NE, Lehigh Valley Central Campus, Allentown, PA 18109 inthe United States of America, hereby certifies thatthe Modem, bearing labeling identification number US: AGSMDO{BDELPH complies with the Federal Communications Commission's CFCC") Rules and Regulations 47 CFR Pert 68, and the Administrative Council on Terminal Attachments (ACTA}adopted technical criteria TIAEIANS-968, 968-8, 968-A-1, 968A-2 and 968-A3 Telecommunications ~ Telephone Terminal Equpment Technical Requirements for Connection of Terminal Equipment To the Telephone Network Brad Grand Technical Manager mmm A05-0413001 5s mame 4070107003 Lae OCH CR EAR EEO OE A CMR ALU SHE) ASS AMS J Cou SHH] EID URE eo, HP LAP Sa te Se Pa

(FARA RORAMEL, ATORLRORS, HERBERT HR 1 faEranen. SOHAL RA, AP RRRRE 220V if. 2 BRBMMLS OI, AMR TILE ABAD ENITIT. 3 BRELGL. PRELIM. MAT. RAUBER. 4. FEB RORAE ALA, CRAP. 5. RENO TLS ME. a Hy Wh Ae ee a RE a Oe AA ROR LS REM T AM, MTR CM RR. LT FLAIR: hip://wwwehp.com.en eR pL BA RAS Sit: ACAD 112 Soh AA iE. 010-65643888 a EXECU) BACs Oa RSA RASTA ( SiCAAN ) HEIRS , BS SIS http://www8. hp.com/us/en/hp-information/environment/product-recycling-html AHURA (il Bit SL BER SATIRE AL )) ROBE OTHE MATIA, KEM TIRH MAVERMS SO AL AE RU FEAI m8 RHE (MBit BAKER EE RAEMSM)) ( GB28380-2012) ME RKRE. WEAPMAN BAIA T:

1. RERCER ORL SALA Beek SR ch ARH DTH PEE PU RE REA AE. OMT LAE ER ASE HEWIH PERI RAE Pe HE PBT RA SEDAN FE (FY) 1 2 3 Bey AX 98.0+5Efa 148.0+5Efa 198.0+5Efa THR tkbL Bx 125.0+ZEfa 175.0+5Efa 225,0+ZEfa cx 159.0+ZEfa 209.0+5Efa 259.0+ZEfa px 184,0+ZEfa 234.0+5Efa 284,0+ZEfa ett AX 20.0+5Efa 35.0+ZEfa 45.0+5Efa it OL BR 26.0+ZEfa 45.0+5Efa 65.0+3Efa cx 54.5+5Efa 75.0+5Efa 123.5+S3Efa TE : DEfa 29 A LO He A RE 2 fo 2. UH HERUN FE SHE RE PEE (CR BEY, FE CCR TLE SARIR SE ALM) BORAT (RAE HLS T anA BB, AC, ALAS REICH PEE BY Be 5: HPT MS RETR Py EDR FER, 3. Fanaa Fr FS A A Tt HL ic LTE, BLP Xe:

Ra REA BHR LR PEEL EP ROL AX FSB, CH, DAML FB AS, C PSALMS TEST FEEL TRL RL BR HAE (CPU) Poe es 2, ABA RAs BAS are (GPU) KFS 26GB c# TRADERS (CPU) JOHOR 2, HAS FRRLEERE (CPU) HBR AT HEE 2, DEAE REP HS ABAEAT SF 26GB, AA A GPU. RPL ATS 128 fit. a. a) RIVERT BY 268 ; oe GPW) ERNE SS b. thy RSC (GPU) pe PIRNEESE (CPU) POEL ODMAT SEF 4, HEDRALYA PRHEHH& :

a RRATEAT SF 4GB :

b. RARER (GPU) ASE

(LK FSF 128 fic KFRPRAAN ANEMIA, BSS (HOM LAER IR ER HEE) (GB28380-2012) 2008 42, HAICBIT SWEAR, IISCOMOMARAVELE, MHRA, 2006 447 A 1 A LAREICIRZES SER + EPROP ELEM AO SAIC SE LCR BBA IT ONE Lik, MAOMHRARICHS ELT http://www.hp.com/go/jisc0950 RBIRLTCEEW Athird-party certification according to ISO 14024 Ia Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. And Last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly. Want to know more?

Read information about TCO Certified, Full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. Athird-party certification according to ISO 14024 Toward sustainable IT products z Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations occur in the supply chain. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products. Additionally, it fulfills the requirements of TCO Certified Edge, the supplemental certification that recognizes leading-edge Products that exceed typical performance in a particular sustainability attribute. At our Product Finder (tcocertified.com/product-finder) you can find out which TCO Certified Edge criterion or criteria this product meets. Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Compliance is verified by independent verification organizations that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Want to know more?

Read information about TCO Certified, Full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. CORE, IAB ABRHRE CT. CORE, REREAD FSCERBNELTHETHM, CORBY DIAP TLE Say SRM STELCEASHS&, MERBESSHCT OEM HVET. WDGRRAAR ICH TELU RU BUELT RSL. VCCI-B COREG. CIABMETS. CORES. HER CRATSCCe AN CLTVETA, TCORBMIVAPTLEV ay Saw CHAIN Bc, SEMEL CTTEMBVET, EXIR EAA (CHE CIELU RU RUALT RSL vcciB COPEL, ET REMA AERA E ILL BRB SU fe a RRL CED HAAR AS aS FAA 7} AEA 7S JO] NOMS ly oka a} heal el AMAT A+ WG HALE Ao]

AA 59] Ue BT) 7pm AL AA) Se APES YS, ws AYA AA eo] AL-BShO] 2h] 9} & Abo] of 2.5em o] AES] 7]

YS Taare. 5.25G~5.35G Batti PUBL E ZR SRST A (AE TS ESR EY SET BB AE ERE

(SRL EE SRA, tle FOUR ROMS UErE GTS ZU PEN AES > FERS A] > 25] +

PSEC FLAS HS SESS HARE at ZEIGE

(FALE (AA ZS RAB fa > ASABE > REBAR > We SEE 77 PSE A=

AIT GZGES > TRIKFR(SESLE (ER 2 AR AS (8 DR BAE 2 GSES CT SS > BEER EE SERS PE PEREZ HE CLASS 1 LASER PRODUCT systems age! re ad crs {130 Arr Panay Ne en age ty Sown es ante com Suppliers Declaration of Conformity Reference Number. Delphi 40 (revision AMS) Place of issue: Allentown, PA, USA Date of issue: 30" Novernber 2006 Agere Systems Inc. at 1110 American Parkway NE, Lehigh Valley Central Campus, Allentown, PA 18109 inthe United States of America, hereby certifies thatthe Modem, bearing labeling identification number US: AGSMDO{BDELPH complies with the Federal Communications Commission's CFCC") Rules and Regulations 47 CFR Pert 68, and the Administrative Council on Terminal Attachments (ACTA}adopted technical criteria TIAEIANS-968, 968-8, 968-A-1, 968A-2 and 968-A3 Telecommunications ~ Telephone Terminal Equpment Technical Requirements for Connection of Terminal Equipment To the Telephone Network Brad Grand Technical Manager mmm A05-0413001 5s mame 4070107003 Lae OCH CR EAR EEO OE A CMR ALU SHE) ASS AMS J Cou SHH] EID URE eo, HP LAP Sa te Se Pa

(FARA RORAMEL, ATORLRORS, HERBERT HR 1 faEranen. SOHAL RA, AP RRRRE 220V if. 2 BRBMMLS OI, AMR TILE ABAD ENITIT. 3 BRELGL. PRELIM. MAT. RAUBER. 4. FEB RORAE ALA, CRAP. 5. RENO TLS ME. a Hy Wh Ae ee a RE a Oe AA ROR LS REM T AM, MTR CM RR. LT FLAIR: hip://wwwehp.com.en eR pL BA RAS Sit: ACAD 112 Soh AA iE. 010-65643888 a EXECU) BACs Oa RSA RASTA ( SiCAAN ) HEIRS , BS SIS http://www8. hp.com/us/en/hp-information/environment/product-recycling-html AHURA (il Bit SL BER SATIRE AL )) ROBE OTHE MATIA, KEM TIRH MAVERMS SO AL AE RU FEAI m8 RHE (MBit BAKER EE RAEMSM)) ( GB28380-2012) ME RKRE. WEAPMAN BAIA T:

1. RERCER ORL SALA Beek SR ch ARH DTH PEE PU RE REA AE. OMT LAE ER ASE HEWIH PERI RAE Pe HE PBT RA SEDAN FE (FY) 1 2 3 Bey AX 98.0+5Efa 148.0+5Efa 198.0+5Efa THR tkbL Bx 125.0+ZEfa 175.0+5Efa 225,0+ZEfa cx 159.0+ZEfa 209.0+5Efa 259.0+ZEfa px 184,0+ZEfa 234.0+5Efa 284,0+ZEfa ett AX 20.0+5Efa 35.0+ZEfa 45.0+5Efa it OL BR 26.0+ZEfa 45.0+5Efa 65.0+3Efa cx 54.5+5Efa 75.0+5Efa 123.5+S3Efa TE : DEfa 29 A LO He A RE 2 fo 2. UH HERUN FE SHE RE PEE (CR BEY, FE CCR TLE SARIR SE ALM) BORAT (RAE HLS T anA BB, AC, ALAS REICH PEE BY Be 5: HPT MS RETR Py EDR FER, 3. Fanaa Fr FS A A Tt HL ic LTE, BLP Xe:

Ra REA BHR LR PEEL EP ROL AX FSB, CH, DAML FB AS, C PSALMS TEST FEEL TRL RL BR HAE (CPU) Poe es 2, ABA RAs BAS are (GPU) KFS 26GB c# TRADERS (CPU) JOHOR 2, HAS FRRLEERE (CPU) HBR AT HEE 2, DEAE REP HS ABAEAT SF 26GB, AA A GPU. RPL ATS 128 fit. a. a) RIVERT BY 268 ; oe GPW) ERNE SS b. thy RSC (GPU) pe PIRNEESE (CPU) POEL ODMAT SEF 4, HEDRALYA PRHEHH& :

a RRATEAT SF 4GB :

b. RARER (GPU) ASE

(LK FSF 128 fic KFRPRAAN ANEMIA, BSS (HOM LAER IR ER HEE) (GB28380-2012) 2008 42, HAICBIT SWEAR, IISCOMOMARAVELE, MHRA, 2006 447 A 1 A LAREICIRZES SER + EPROP ELEM AO SAIC SE LCR BBA IT ONE Lik, MAOMHRARICHS ELT http://www.hp.com/go/jisc0950 RBIRLTCEEW Athird-party certification according to ISO 14024 Ia Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Conformity is verified by independent and approved verifiers that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. And Last but not least, to make sure that the certification and independent verification is accurate, both TCO Certified and the verifiers are reviewed regularly. Want to know more?

Read information about TCO Certified, Full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. Athird-party certification according to ISO 14024 Toward sustainable IT products z Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations occur in the supply chain. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded. This product is a better choice. It meets all the criteria in TCO Certified, the worlds most comprehensive sustainability certification for IT products. Additionally, it fulfills the requirements of TCO Certified Edge, the supplemental certification that recognizes leading-edge Products that exceed typical performance in a particular sustainability attribute. At our Product Finder (tcocertified.com/product-finder) you can find out which TCO Certified Edge criterion or criteria this product meets. Criteria in TCO Certified have a life-cycle perspective and balance environmental and social responsibility. Compliance is verified by independent verification organizations that specialize in IT products, social responsibility or other sustainability issues. Verification is done both before and after the certificate is issued, covering the entire validity period. The process also includes ensuring that corrective actions are implemented in all cases of factory non-conformities. Thank you for making a responsible product choice, that help drive progress towards a more sustainable future!

Want to know more?

Read information about TCO Certified, Full criteria documents, news and updates at tcocertified.com. On the website you'll also find our Product Finder, which presents a complete, searchable listing of certified products. CORE, IAB ABRHRE CT. CORE, REREAD FSCERBNELTHETHM, CORBY DIAP TLE Say SRM STELCEASHS&, MERBESSHCT OEM HVET. WDGRRAAR ICH TELU RU BUELT RSL. VCCI-B COREG. CIABMETS. CORES. HER CRATSCCe AN CLTVETA, TCORBMIVAPTLEV ay Saw CHAIN Bc, SEMEL CTTEMBVET, EXIR EAA (CHE CIELU RU RUALT RSL vcciB COPEL, ET REMA AERA E ILL BRB SU fe a RRL CED HAAR AS aS FAA 7} AEA 7S JO] NOMS ly oka a} heal el AMAT A+ WG HALE Ao]

AA 59] Ue BT) 7pm AL AA) Se APES YS, ws AYA AA eo] AL-BShO] 2h] 9} & Abo] of 2.5em o] AES] 7]

YS Taare.

ElectronicRegulatorylabelsofHSNQ20C Toviewelectronicregulatorylabels:

1. Turnonorrestartthecomputer. 2. Pressescorf10toenterComputerSetup. 3. UseapointingdeviceorthearrowkeystoselectAdvanced,selectElectronicLabels,andthen pressenter. 4. Toviewanelectroniclabel,useapointingdeviceorthearrowkeystoselectoneofthelisted items,andthenpressOK. NOTE:Thelistofavailableelectroniclabelitemsvariesdependingonthecomputermodeland installeddevices. 5. ToexitComputerSetupmenuswithoutmakinganychanges:

SelecttheExiticoninthelowerrightcornerofthescreen,andthenfollowtheonscreen instructions. or UsethearrowkeystoselectMain,selectIgnoreChangesandExit,andthenpressenter.

Authority to Act as Agent May 22, 2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Steven Hackett of Intel Corporation is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). This authorization is for applications associated with HP FCC IDs: B94-AX200D2LP, B94HNC04PDCP2, B94HNC04PKCP2, and B94HNQ20PDCP2. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Agency Agreement Expiration Date: Nov/22/2019 Thank you, By: Name: Peter S. Tevlin Signature:

Email: peter.tevlin@hp.com Telephone: +1 512 319 7260 Title: Regulatory Manager, Communications Modules, Worldwide Technical Regulations On behalf of Company: HP Inc. 1501 Page Mill Road Palo Alto, CA 94304

August 5, 2019 Subject: Confidentiality Request for FCC ID: B94HNQ20PDCP2 Pursuant to FCC 47 CRF 0.457(d) and 0.459 the applicant requests that a part of the subject FCC application be held confidential. Permanent Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Permanent X X Exhibit Block Diagrams External Photos Internal Photos Operation Description/Antenna Specification/Parts List Operation Description/TAS Operational Report Operational Description/ Validation Report171110-01.TR02 Operational Description/ Dynamic WLAN SAR Description Schematics Test Setup Photos Users Manual Intel Mobile Communications has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition"

would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

(Signature/Title1) ____________________

(Print Name) Steven C. Hackett Sr Regulatory Engineer for Intel Corp acting as agent for HP Inc.

Request for Modular/Limited Modular Approval Date: September 10, 2019 Subject: Manufacturers Declaration for - Modular Approval Confidentiality Request for: ______B94HSNQ20PDCP2______

- Limited Modular Approval - Limited Split Modular Approval

- Split Modular Approval 8 Basic Requirements FCC Part 15.212(a)(1) For Items Marked NO(*), the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) Details: The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector. See photo provided with this filing.

- YES - NO(*) 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) Details: Data to the modulation circuit is buffered as described in the operational description provided with the application>

- YES - NO(*) 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) Details: The module contains its own power supply regulation. Please refer to operational description filed with this application

- YES - NO(*) 4. The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) Details: The module connects to its antenna using an UFL connector which is considered a non-standard connector. The antenna and connector specification are provided with this filing.

- YES - NO(*) 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) Details: The module was tested in OEM host PC and is limited to installation in the host described in this filing.

- YES - NO(*) 053019-02a 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see Modular Approval Requirement Requirement Met KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID:

XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC certified transmitter module(s). Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) Details: There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labeling instructions are shown in the installation manual .filed with this application.

- YES - NO(*) 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 15.212(a)(1)(vii) Details: The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application.

- YES - NO(*) 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. 15.212(a)(1)(viii) Details: The module meets mobile/portable conditions levels as shown in the RF exposure test report filed with this application.

- YES - NO(*) 053019-02a Limited Module Description When Applicable

* If a module does NOT meet one or more of the above 8 requirements, the applicant may request Limited Modular Approval (LMA). This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA;

the module is only approved for use when installed in devices produced by grantee. A description regarding how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured should be provided here. Details: The module was tested in the OEM host PC and is limited to installation in the PC described in this application. Software Considerations KDB 594280 / KDB 442812 (One of the following 2 items must be applied) Requirement Requirement Met 1. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description must be provided about how such control is implemented to ensure prevention of third-party modification; see KDB Publication 594280. Details: The firmware of the device cannot be modified or adjusted by the end user as described in a separate cover letter filed with this application.

- Provided in Separate Cover Letter

- N/A 2. For Software Defined Radio (SDR) devices, transmitter module applications must provide a software security description; see KDB Publication 442812.

- Provided in Separate Cover Letter

- N/A Details: <example N/A>

Split Modular Requirements Requirement Provided in Manual 1. For split modular transmitters, specific descriptions for secure communications between front-end and control sections, including authentication and restrictions on third-party modifications; also, instructions to third-party integrators on how control is maintained. Details: <example N/A >

- Provided in Separate Cover Letter

- N/A 053019-02a OEM Integration Manual Guidance KDB 996369 D03 Section 2 Clear and Specific Instructions Describing the Conditions, Limitations, and Procedures for third-parties to use and/or integrate the module into a host device. Requirement Is this module intended for sale to third parties?

- YES

- No, If No, and LMA applies, the applicant can optionally choose to not make the following detailed info public. However there still needs to be basic integration instructions for a users manual and the information below must still be included in the operational description. If the applicant wishes to keep this info confidential, this will require a separate statement cover letter explaining the module is not for sale to third parties and that integration instructions are internal confidential documents. Items required to be in the manual See KDB 996369 D03, Section 2 As of May 1, 2019, the FCC requires ALL the following information to be in the installation manual. Modular transmitter applicants should include information in their instructions for all these items indicating clearly when they are not applicable. For example information on trace antenna design could indicate Not Applicable. Also if a module is limited to only a grantees own products and not intended for sale to third parties, the user instructions may not need to be detailed and the following items can be placed in the operational description, but this should include a cover letter as cited above. 1. List of applicable FCC rules. KDB 996369 D03, Section 2.2 a. Only list rules related to the transmitter. 2. Summarize the specific operational use conditions. KDB 996369 D03, Section 2.3 a. Conditions such as limits on antennas, cable loss, reduction of power for point to point 3. Limited Module Procedures. KDB 996369 D03, Section 2.4 systems, professional installation info a. Describe alternative means that the grantee uses to verify the host meets the necessary limiting conditions b. When RF exposure evaluation is necessary, state how control will be maintained such that compliance is ensured, such as Class II for new hosts, etc. 4. Trace antenna designs. KDB 996369 D03, Section 2.5 a. Layout of trace design, parts list, antenna, connectors, isolation requirements, tests for design verification, and production test procedures for ensuring compliance. If confidential, the method used to keep confidential must be identified and information provided in the operational description. 5. RF exposure considerations. KDB 996369 D03, Section 2.6 a. Clearly and explicitly state conditions that allow host manufacturers to use the module. Two types of instructions are necessary: first to the host manufacturer to define conditions (mobile, portable xx cm from body) and second additional text needed to be provided to the end user in the host product manuals. 6. Antennas. KDB 996369 D03, Section 2.7 a. List of antennas included in the application and all applicable professional installer instructions when applicable. The antenna list shall also identify the antenna types

(monopole, PIFA, dipole, etc note that omni-directional is not considered a type) 7. Label and compliance information. KDB 996369 D03, Section 2.8 a. Advice to host integrators that they need to provide a physical or e-label stating Contains FCC ID: with their finished product 8. Information on test modes and additional testing requirements. KDB 996369 D03, Section 2.9 a. Test modes that should be taken into consideration by host integrators including clarifications necessary for stand-alone and simultaneous configurations. b. Provide information on how to configure test modes for evaluation 9. Additional testing, Part 15 Subpart B disclaimer. KDB 996369 D03, Section 2.10

- All Items shown to the left are provided in the Modular Integration Guide (or UM) for Full Modular Approval (MA) or LMA.

- An LMA applies and is approved ONLY for use by the grantee in their own products, and not intended for sale to 3rd parties as provided in a separate cover letter. Therefore the information shown to the left is found in the theory of operation. Sincerely, 053019-02a By:

Sr. Regulatory Engineer __________________________ __Steven C Hackett______________________

(Signature/Title1)

(Print name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019-02a

American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Date: 9/12/2019 Ref: KDB 996369 D02 Module Q and A v01 Dear Examiner, This letter will attest that the FCC guidance in KDB 996369 D02 Module Q and A v01 for integrating modular transmitters into host equipment was followed for the preparation of this application under FCC ID: B94HNQ20PDCP2 The equipment will include two previously authorized transmitter modules as described below and will re-use previous radiated spurious emissions from those modules original approval. WLAN/BT Module LTE Module Original Intel FCC ID: PD9AX200D2L, originally granted on 3/04/19; RF test reports 181210-02.TR01 thru TR05. HP FCC ID: B94-AX200D2LZ , granted 4/01/2019 by change of ID. FCC ID: ZMOL850GLD, granted 08/08/2018; test report SZEM180500437001. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless. Antenna specifications for these modules are included within this filing. These modules are used in accordance with the original module approval conditions and therefore re-use of RF conducted emissions is justified, the report accurately represents test results under the new conditions according to KDB 996369 D02 Module Q and A v01. Sincerely, Steven C. Hackett Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 1501 Page Mill Road Palo Alto, CA 94304

Request for Modular/Limited Modular Approval Date: September 10, 2019 Subject: Manufacturers Declaration for - Modular Approval Confidentiality Request for: ______B94HNC04PKCP2______

- Limited Modular Approval - Limited Split Modular Approval

- Split Modular Approval 8 Basic Requirements FCC Part 15.212(a)(1) For Items Marked NO(*), the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) Details: The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector. See photo provided with this filing.

- YES - NO(*) 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) Details: Data to the modulation circuit is buffered as described in the operational description provided with the application>

- YES - NO(*) 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) Details: The module contains its own power supply regulation. Please refer to operational description filed with this application

- YES - NO(*) 4. The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) Details: The module connects to its antenna using an UFL connector which is considered a non-standard connector. The antenna and connector specification are provided with this filing.

- YES - NO(*) 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) Details: The module was tested in OEM host PC and is limited to installation in the host described in this filing.

- YES - NO(*) 053019-02a 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see Modular Approval Requirement Requirement Met KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID:

XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC certified transmitter module(s). Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) Details: There is a label on the module as shown in the labeling exhibit filed with this application. Host specific labeling instructions are shown in the installation manual .filed with this application.

- YES - NO(*) 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 15.212(a)(1)(vii) Details: The module complies with FCC Part 15C requirements. Instructions to the OEM installer are provided in the installation manual filed with this application.

- YES - NO(*) 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. 15.212(a)(1)(viii) Details: The module meets mobile/portable conditions levels as shown in the RF exposure test report filed with this application.

- YES - NO(*) 053019-02a Limited Module Description When Applicable

* If a module does NOT meet one or more of the above 8 requirements, the applicant may request Limited Modular Approval (LMA). This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA;

the module is only approved for use when installed in devices produced by grantee. A description regarding how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured should be provided here. Details: The module was tested in the OEM host PC and is limited to installation in the PC described in this application. Software Considerations KDB 594280 / KDB 442812 (One of the following 2 items must be applied) Requirement Requirement Met 1. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description must be provided about how such control is implemented to ensure prevention of third-party modification; see KDB Publication 594280. Details: The firmware of the device cannot be modified or adjusted by the end user as described in a separate cover letter filed with this application.

- Provided in Separate Cover Letter

- N/A 2. For Software Defined Radio (SDR) devices, transmitter module applications must provide a software security description; see KDB Publication 442812.

- Provided in Separate Cover Letter

- N/A Details: <example N/A>

Split Modular Requirements Requirement Provided in Manual 1. For split modular transmitters, specific descriptions for secure communications between front-end and control sections, including authentication and restrictions on third-party modifications; also, instructions to third-party integrators on how control is maintained. Details: <example N/A >

- Provided in Separate Cover Letter

- N/A 053019-02a OEM Integration Manual Guidance KDB 996369 D03 Section 2 Clear and Specific Instructions Describing the Conditions, Limitations, and Procedures for third-parties to use and/or integrate the module into a host device. Requirement Is this module intended for sale to third parties?

- YES

- No, If No, and LMA applies, the applicant can optionally choose to not make the following detailed info public. However there still needs to be basic integration instructions for a users manual and the information below must still be included in the operational description. If the applicant wishes to keep this info confidential, this will require a separate statement cover letter explaining the module is not for sale to third parties and that integration instructions are internal confidential documents. Items required to be in the manual See KDB 996369 D03, Section 2 As of May 1, 2019, the FCC requires ALL the following information to be in the installation manual. Modular transmitter applicants should include information in their instructions for all these items indicating clearly when they are not applicable. For example information on trace antenna design could indicate Not Applicable. Also if a module is limited to only a grantees own products and not intended for sale to third parties, the user instructions may not need to be detailed and the following items can be placed in the operational description, but this should include a cover letter as cited above. 1. List of applicable FCC rules. KDB 996369 D03, Section 2.2 a. Only list rules related to the transmitter. 2. Summarize the specific operational use conditions. KDB 996369 D03, Section 2.3 a. Conditions such as limits on antennas, cable loss, reduction of power for point to point 3. Limited Module Procedures. KDB 996369 D03, Section 2.4 systems, professional installation info a. Describe alternative means that the grantee uses to verify the host meets the necessary limiting conditions b. When RF exposure evaluation is necessary, state how control will be maintained such that compliance is ensured, such as Class II for new hosts, etc. 4. Trace antenna designs. KDB 996369 D03, Section 2.5 a. Layout of trace design, parts list, antenna, connectors, isolation requirements, tests for design verification, and production test procedures for ensuring compliance. If confidential, the method used to keep confidential must be identified and information provided in the operational description. 5. RF exposure considerations. KDB 996369 D03, Section 2.6 a. Clearly and explicitly state conditions that allow host manufacturers to use the module. Two types of instructions are necessary: first to the host manufacturer to define conditions (mobile, portable xx cm from body) and second additional text needed to be provided to the end user in the host product manuals. 6. Antennas. KDB 996369 D03, Section 2.7 a. List of antennas included in the application and all applicable professional installer instructions when applicable. The antenna list shall also identify the antenna types

(monopole, PIFA, dipole, etc note that omni-directional is not considered a type) 7. Label and compliance information. KDB 996369 D03, Section 2.8 a. Advice to host integrators that they need to provide a physical or e-label stating Contains FCC ID: with their finished product 8. Information on test modes and additional testing requirements. KDB 996369 D03, Section 2.9 a. Test modes that should be taken into consideration by host integrators including clarifications necessary for stand-alone and simultaneous configurations. b. Provide information on how to configure test modes for evaluation 9. Additional testing, Part 15 Subpart B disclaimer. KDB 996369 D03, Section 2.10

- All Items shown to the left are provided in the Modular Integration Guide (or UM) for Full Modular Approval (MA) or LMA.

- An LMA applies and is approved ONLY for use by the grantee in their own products, and not intended for sale to 3rd parties as provided in a separate cover letter. Therefore the information shown to the left is found in the theory of operation. Sincerely, 053019-02a By:

Sr. Regulatory Engineer __________________________ __Steven C Hackett______________________

(Signature/Title1)

(Print name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 053019-02a

American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Date: 8/12/2019 Ref: Application for Original Equipment Authorization for FCC ID: B94HNQ20PDCP2 Dear Examiner, This is to request FCC Authorization for original equipment under FCC ID:

B94HNQ20PDCP2. The equipment in this application is HP model HSN-Q20C, 2 in 1 PC. The equipment is provided with a detachable keyboard for use in notebook or tablet mode as described within this filing. The equipment will also include two previously authorized transmitter modules as described below. FCC ID: B94-AX200D2LP , granted 4/01/2019 by change of ID. This is a WLAN 802.11a/b/g/n/ac/ax module that is authorized for portable/mobile conditions. FCC ID: ZMOL850GLD, granted 8/08/2018. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wireless. Antenna specifications for these modules are included within this filing. It is also our intention to apply the PAG re-use process for granting approvals. The full PAG review was previously performed under original KDB. We believe this application meets the conditions for PAG re-use as it is a special RF exposure compliance condition. The exact same WLAN and WWAN authorized modules/

antennas are re-used in this PC with the exact same algorithm and validation methods for time averaging SAR. Sincerely, Steven C. Hackett Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 1501 Page Mill Road Palo Alto, CA 94304

American Certification Body 6731 Whittier Avenue Suite C110 McLean, VA 22101 USA Date: 8/12/2019 Ref: KDB 996369 D04 Module Integration Guide v01 Dear Examiner, This letter will attest that the FCC guidance in KDB 996369 D04 for integrating modular transmitters into host equipment was followed for the preparation of this application under FCC ID: B94HNQ20PDCP2 The equipment will include two previously authorized transmitter modules as described below. FCC ID: B94-AX200D2LP , granted 4/01/2019 by change of ID. This is a WLAN 802.11a/b/g/n/ac/ax module that is authorized for portable/mobile conditions. FCC ID: ZMOL850GLD, granted 8/08/2018. This is a PCS licensed transmitter LTE module authorized as single modular approval to Fibocomm Wirele Antenna specifications for these modules are included within this filing. Sincerely, Steven C. Hackett Sr Regulatory Engineer, Intel Corporation acting as agent on behalf of HP Inc. 1501 Page Mill Road Palo Alto, CA 94304