app
s
|
Applicant Information
|
|
1 2
|
Effective |
2014-07-01
|
1 2
|
2014-06-10
|
1 2
|
Applicant's complete, legal business name |
Ademco Inc.
|
1 2
|
FCC Registration Number (FRN) |
0004071130
|
1 2
|
Physical Address |
2 Corporate Center Drive
|
1 2
|
9040
|
1 2
|
Melville, New York 11747
|
1 2
|
United States
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
h******@acbcert.com
|
1 2
|
T******@TIMCOENGR.COM
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
CFS
|
1 2
|
Equipment Product Code |
8DLWLE200N2
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
M**** A******
|
1 2
|
Title |
RF Compliance Engineer
|
1 2
|
Telephone Number |
516-5********
|
1 2
|
Fax Number |
516-5********
|
1 2
|
E-mail |
m******@honeywell.com
|
|
app
s
|
Technical Contact
|
1 2
|
Firm Name |
Honeywell International Inc.
|
1 2
|
Name |
S****** A********
|
1 2
|
Physical Address |
2 Corporate Center Drive
|
1 2
|
Melville, New York 11747
|
1 2
|
United States
|
1 2
|
Telephone Number |
516 5********
|
1 2
|
Fax Number |
516 5********
|
1 2
|
E-mail |
s******@honeywell.com
|
|
app
s
|
Non Technical Contact
|
1 2
|
Firm Name |
Honeywell International Inc.
|
1 2
|
Name |
M******** S****
|
1 2
|
Physical Address |
Melville, New York 11747
|
1 2
|
United States
|
1 2
|
Telephone Number |
516 6********
|
1 2
|
Fax Number |
516 6********
|
1 2
|
E-mail |
m******@honeywell.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | No |
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/24/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIRELESS-BGN 2x2 Network Mini PCIE ADAPTER |
1 2 | WIRELESS-BGN 2X2 NETWORK MINI PCIE ADAPTER |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Single Modular Approval |
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | This Class II Permissive Change is to request approval for installation into a new host with Integral Antennas.
Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.5dBi. End-users and installers must be provided with antenna installation instructions for finished products. End-users and installers must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the OEM integrator ensures that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20MHz and 40MHz bandwidth mode. |
1 2 | Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 4.5dBi. End-users and installers must be provided with antenna installation instructions for finished products. End-users and installers must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the OEM integrator ensures that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20MHz and 40MHz bandwidth mode. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
Rhein Tech Laboratories, Inc.
|
1 2
|
MRT Technology (Suzhou) Co., Ltd
|
1 2
|
Name |
R**** M********
|
1 2
|
W****** J********
|
1 2
|
Telephone Number |
703-6********
|
1 2
|
86-51******** Extension:
|
1 2
|
Fax Number |
703-6********
|
1 2
|
E-mail |
r******@rheintech.com
|
1 2
|
r******@mrt-cert.com
|
|