app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2018-03-26
|
1 2 3 4 5
|
2017-01-03
|
1 2 3 4 5
|
2015-10-09
|
1 2 3 4 5
|
Applicant's complete, legal business name |
ZyXEL Communications Corporation
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0021059092
|
1 2 3 4 5
|
Physical Address |
No.2, Industry East Road IX, Science Park
|
1 2 3 4 5
|
Hsinchu, N/A
|
1 2 3 4 5
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
c******@telefication.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
I88
|
1 2 3 4 5
|
Equipment Product Code |
EMG3425Q10A
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
E****** B******
|
1 2 3 4 5
|
Title |
Section Manager
|
1 2 3 4 5
|
Telephone Number |
886 3******** Extension:
|
1 2 3 4 5
|
Fax Number |
886 3********
|
1 2 3 4 5
|
E-mail |
E******@zyxel.com.tw
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
International Certification Corp.
|
1 2 3 4 5
|
Name |
G**** C********
|
1 2 3 4 5
|
Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
1 2 3 4 5
|
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
1 2 3 4 5
|
Taiwan
|
1 2 3 4 5
|
Telephone Number |
886-3********
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
E-mail |
G******@icertifi.com.tw
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5
|
Firm Name |
International Certification Corp.
|
1 2 3 4 5
|
Name |
W****** L********
|
1 2 3 4 5
|
Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
1 2 3 4 5
|
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
1 2 3 4 5
|
Taiwan
|
1 2 3 4 5
|
Telephone Number |
886-3********
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
E-mail |
w******@icertifi.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | No |
1 2 3 4 5 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/20/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 | DTS - Digital Transmission System |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Simultaneous Dual-Band Wireless AC2200 Gigabit Ethernet Gateway |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 | Modular Equipment Type | Does not apply |
1 2 3 4 5 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | C2PC: 2.4G power amplifier is changed. increase output power of 5725 to 5850MHz to comply with new emission limits by software setting. 2nd source components into power portion of Non-RF part: 12V(Q1), 5V(L4, L5) and 1.2V(L17). Remove one adaptor.
Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Equipment uses 20/40/80 MHz bandwidth. |
1 2 3 4 5 | C2PC: 2.4G power amplifier is changed. increase output power of 5725 to 5850MHz to comply with new emission limits by software setting. 2nd source components into power portion of Non-RF part: 12V(Q1), 5V(L4, L5) and 1.2V(L17).
Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Equipment uses 20/40 MHz bandwidth. |
1 2 3 4 5 | C2PC: Adding DFS band apply by software change.
Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Equipment uses 20/40/80 MHz bandwidth. |
1 2 3 4 5 | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Equipment uses 20/40 MHz bandwidth. |
1 2 3 4 5 | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Equipment uses 20/40/80 MHz bandwidth. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
International Certification Corp.
|
1 2 3 4 5
|
Name |
F****** C****
|
1 2 3 4 5
|
Telephone Number |
886-3******** Extension:
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
E-mail |
J******@icertifi.com.tw
|
|