app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2016-08-17
|
1 2 3
|
2015-11-30
|
1 2 3
|
Applicant's complete, legal business name |
ZyXEL Communications Corporation
|
1 2 3
|
FCC Registration Number (FRN) |
0021059092
|
1 2 3
|
Physical Address |
No.2, Industry East Road IX, Science Park
|
1 2 3
|
Hsinchu, N/A
|
1 2 3
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
c******@telefication.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
I88
|
1 2 3
|
Equipment Product Code |
NBG6815
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
E******** B********
|
1 2 3
|
Title |
Section Manager
|
1 2 3
|
Telephone Number |
886 3******** Extension:
|
1 2 3
|
Fax Number |
886 3********
|
1 2 3
|
E-mail |
E******@zyxel.com.tw
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
International Certification Corp.
|
1 2 3
|
Name |
G****** C******
|
1 2 3
|
Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
1 2 3
|
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
1 2 3
|
Taiwan
|
1 2 3
|
Telephone Number |
886-3********
|
1 2 3
|
Fax Number |
886-3********
|
1 2 3
|
E-mail |
G******@icertifi.com.tw
|
|
app
s
|
Non Technical Contact
|
1 2 3
|
Firm Name |
International Certification Corp.
|
1 2 3
|
Name |
W****** L******
|
1 2 3
|
Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
1 2 3
|
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
1 2 3
|
Taiwan
|
1 2 3
|
Telephone Number |
886-3********
|
1 2 3
|
Fax Number |
886-3********
|
1 2 3
|
E-mail |
w******@icertifi.com.tw
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/29/2016 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Simultaneous Dual-Band Wireless AC2200 Gigabit Ethernet Gateway |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Does not apply |
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Class II Permissive Change : This Change is according to KDB 926956 D01 U-NII Transition Plan v01r06. The minimum test requirements for Class II permissive change is according Answer of Question 16 section c)4)i) requirements.
Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz.
Operations in 5150-5250 MHz band is for indoor use only. |
1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5210MHz.
Operations in 5150-5250 MHz band is for indoor use only. |
1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
This device has 20/40/80 MHz bandwidth modes.
The 80 MHz mode is limited to channel at 5775 MHz. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
International Certification Corp.
|
1 2 3
|
Name |
J**** C****
|
1 2 3
|
F******** C****
|
1 2 3
|
Telephone Number |
886-3******** Extension:
|
1 2 3
|
Fax Number |
886-3********
|
1 2 3
|
E-mail |
J******@icertifi.com.tw
|
|