all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 |
|
User manual-1 | Users Manual | 4.29 MiB | ||||
1 2 3 |
|
User manual-2 | Users Manual | 3.79 MiB | ||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | External Photos | |||||||
1 2 3 | ID Label/Location Info | |||||||
1 2 3 | Internal Photos | |||||||
1 2 3 | RF Exposure Info | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Setup Photos | |||||||
1 2 3 | Cover Letter(s) | |||||||
1 2 3 | Test Report | |||||||
1 2 3 | Test Report |
1 2 3 | User manual-1 | Users Manual | 4.29 MiB |
NBG6815 AC2200 MU-MIMO Dual-Band Wireless Gigabit Router Version 1.00 Edition 1, 11/2015 Quick Start Guide Users Guide Default Login Details LAN IP Address www.zyxel.com http://192.168.1.1
(Router Mode) http://192.168.1.2
(Access Point Mode) Password 1234 Copyright 2015 ZyXEL Communications Corporation IMPORTANT!
READ CAREFULLY BEFORE USE. KEEP THIS GUIDE FOR FUTURE REFERENCE. Screenshots and graphics in this book may differ slightly from your product due to differences in your product firmware or your computer operating system. Every effort has been made to ensure that the information in this manual is accurate. Related Documentation Quick Start Guide The Quick Start Guide shows how to connect the NBG6815 and access the Web Configurator wizards. It contains information on setting up your network and configuring for Internet access. More Information Go to support.zyxel.com to find other information on the NBG6815. NBG6815 Users Guide 2 Contents Overview Contents Overview Users Guide .........................................................................................................................................9 Introduction .............................................................................................................................................10 Introducing the Web Configurator ...........................................................................................................14 eaZy 123 Wizard .....................................................................................................................................17 NBG6815 Modes .....................................................................................................................................26 Easy Mode ..............................................................................................................................................27 Router Mode ...........................................................................................................................................35 Access Point Mode .................................................................................................................................41 Tutorials ..................................................................................................................................................48 Technical Reference ..........................................................................................................................58 Status ......................................................................................................................................................59 WAN ........................................................................................................................................................67 Wireless LAN ..........................................................................................................................................84 LAN .......................................................................................................................................................103 Applications ...........................................................................................................................................108 Security .................................................................................................................................................132 Maintenance ..........................................................................................................................................138 Troubleshooting ....................................................................................................................................152 NBG6815 Users Guide 3 Table of Contents Table of Contents Contents Overview ..............................................................................................................................3 Table of Contents .................................................................................................................................4 Part I: Users Guide ........................................................................................... 9 Chapter 1 Introduction.........................................................................................................................................10 1.1 Overview ...........................................................................................................................................10 1.2 Applications .......................................................................................................................................10 1.3 Ways to Manage the NBG6815 ........................................................................................................10 1.4 Good Habits for Managing the NBG6815 ......................................................................................... 11 1.5 Resetting the NBG6815 .................................................................................................................... 11 1.5.1 How to Use the RESET Button ................................................................................................ 11 1.6 The WPS Button ............................................................................................................................... 11 1.7 LEDs .................................................................................................................................................12 Chapter 2 Introducing the Web Configurator ....................................................................................................14 2.1 Overview ...........................................................................................................................................14 2.2 Accessing the Web Configurator .......................................................................................................14 2.2.1 Login Screen ...........................................................................................................................15 2.2.2 Change Default Password Screen ..........................................................................................15 Chapter 3 eaZy 123 Wizard..................................................................................................................................17 3.1 Overview ...........................................................................................................................................17 3.2 Accessing the eaZy 123 Wizard ........................................................................................................17 3.3 Internet Type .....................................................................................................................................19 3.3.1 WAN Selection Type: Automatic - DHCP ................................................................................20 3.3.2 WAN Selection Type: PPPoE ..................................................................................................20 3.3.3 WAN Selection Type: Static .....................................................................................................21 3.4 Wireless Network ..............................................................................................................................22 Chapter 4 NBG6815 Modes .................................................................................................................................26 4.1 Overview ...........................................................................................................................................26 4.1.1 Web Configurator Modes .........................................................................................................26 NBG6815 Users Guide 4 Table of Contents 4.1.2 Device Modes ..........................................................................................................................26 Chapter 5 Easy Mode ...........................................................................................................................................27 5.1 Overview ...........................................................................................................................................27 5.2 What You Can Do .............................................................................................................................27 5.3 What You Need to Know ...................................................................................................................28 5.4 Navigation Panel ...............................................................................................................................28 5.5 Network Map .....................................................................................................................................28 5.6 Control Panel ....................................................................................................................................30 5.6.1 Wi-Fi ........................................................................................................................................31 5.6.2 Guest Wi-Fi ..............................................................................................................................32 5.6.3 Parental Control .......................................................................................................................33 5.6.4 Notification ...............................................................................................................................34 5.6.5 LED ..........................................................................................................................................34 Chapter 6 Router Mode........................................................................................................................................35 6.1 Overview ...........................................................................................................................................35 6.2 Router Mode Status Screen ..............................................................................................................35 6.2.1 Navigation Panel .....................................................................................................................38 Chapter 7 Access Point Mode.............................................................................................................................41 7.1 Overview ...........................................................................................................................................41 7.2 What You Can Do .............................................................................................................................41 7.3 What You Need to Know ...................................................................................................................41 7.3.1 Setting your NBG6815 to AP Mode .........................................................................................42 7.3.2 Accessing the Web Configurator in Access Point Mode ..........................................................42 7.3.3 Configuring your WLAN and Maintenance Settings ................................................................43 7.4 AP Mode Status Screen ....................................................................................................................43 7.4.1 Navigation Panel .....................................................................................................................45 7.5 LAN Screen .......................................................................................................................................45 Chapter 8 Tutorials...............................................................................................................................................48 8.1 Overview ...........................................................................................................................................48 8.2 Set Up a Wireless Network Using WPS ............................................................................................48 8.2.1 Push Button Configuration (PBC) ............................................................................................48 8.2.2 PIN Configuration ....................................................................................................................49 8.3 Connect to NBG6815 Wireless Network without WPS .....................................................................50 8.3.1 Configure Your Notebook ........................................................................................................52 8.4 Using Guest SSIDs on the NBG6815 ...............................................................................................54 NBG6815 Users Guide 5 Table of Contents 8.4.1 Configuring Security Settings of Guest SSIDs ........................................................................55 Part II: Technical Reference............................................................................ 58 Chapter 9 Status...................................................................................................................................................59 9.1 Overview ...........................................................................................................................................59 9.1.1 What You Can Do ....................................................................................................................59 9.2 Live Network Monitor Screen ............................................................................................................59 9.3 Usage Monitor Screen ......................................................................................................................61 9.4 Common Usage Screen .................................................................................................................62 9.5 Download Traffic Statistics Screen ....................................................................................................63 9.6 DHCP Table Screen ..........................................................................................................................64 9.7 WLAN 2.4G/5G Clients Screen .........................................................................................................65 Chapter 10 WAN .....................................................................................................................................................67 10.1 Overview .........................................................................................................................................67 10.2 What You Can Do ...........................................................................................................................67 10.3 What You Need To Know ................................................................................................................67 10.3.1 Configuring Your Internet Connection ....................................................................................68 10.4 Internet Connection Screen ............................................................................................................70 10.4.1 IPoE Encapsulation ...............................................................................................................70 10.4.2 PPPoE Encapsulation ...........................................................................................................75 10.5 NAT .................................................................................................................................................79 10.5.1 General Screen .....................................................................................................................79 10.5.2 Port Trigger Screen ...............................................................................................................81 10.6 Dynamic DNS Screen .....................................................................................................................82 Chapter 11 Wireless LAN.......................................................................................................................................84 11.1 Overview .........................................................................................................................................84 11.1.1 What You Can Do ..................................................................................................................85 11.1.2 What You Should Know .........................................................................................................85 11.2 Wireless Screen .............................................................................................................................89 11.3 Wireless Security .............................................................................................................................91 11.3.1 No Security ............................................................................................................................91 11.3.2 WPA-PSK/WPA2-PSK ...........................................................................................................92 11.3.3 WPA/WPA2 ............................................................................................................................93 11.4 Guest Wireless Screen ....................................................................................................................94 11.4.1 Guest Wireless Edit ...............................................................................................................95 NBG6815 Users Guide 6 Table of Contents 11.5 MAC Filter Screen ..........................................................................................................................97 11.6 Advanced Screen ............................................................................................................................98 11.7 WPS Screen ....................................................................................................................................99 11.8 Scheduling Screen ........................................................................................................................101 Chapter 12 LAN ....................................................................................................................................................103 12.1 Overview .......................................................................................................................................103 12.2 What You Can Do .........................................................................................................................103 12.3 What You Need To Know ..............................................................................................................103 12.4 LAN IP Screen ..............................................................................................................................104 12.5 Static DHCP Screen ......................................................................................................................105 12.6 IPv6 LAN Screen ...........................................................................................................................106 Chapter 13 Applications ......................................................................................................................................108 13.1 Overview .......................................................................................................................................108 13.1.1 What You Can Do ................................................................................................................108 13.1.2 What You Need To Know .....................................................................................................108 13.1.3 Before You Begin ................................................................................................................. 110 13.2 Parental Control ............................................................................................................................ 110 13.2.1 General Screen ................................................................................................................... 110 13.2.2 Notification Screen .............................................................................................................. 114 13.3 Bandwidth Management ............................................................................................................... 116 13.3.1 Bandwidth Screen ............................................................................................................... 117 13.3.2 Priorities Screen .................................................................................................................. 118 13.4 USB Media Sharing Screen .......................................................................................................... 119 13.5 UPnP Screen ................................................................................................................................121 13.6 File Sharing ...................................................................................................................................122 13.6.1 SAMBA Server Screen ........................................................................................................122 13.6.2 FTP Server Screen ..............................................................................................................124 13.6.3 Example of Accessing Your Shared Files From a Computer ...............................................125 13.7 One Connect Screen .....................................................................................................................129 13.8 Technical Reference ......................................................................................................................130 Chapter 14 Security..............................................................................................................................................132 14.1 Overview .....................................................................................................................................132 14.1.1 What You Can Do ................................................................................................................132 14.1.2 What You Need To Know .....................................................................................................132 14.2 IPv4 Firewall Screen ....................................................................................................................133 14.3 IPv6 Firewall Screen .....................................................................................................................135 NBG6815 Users Guide 7 Table of Contents Chapter 15 Maintenance ......................................................................................................................................138 15.1 Overview .......................................................................................................................................138 15.2 What You Can Do .........................................................................................................................138 15.3 General Screen .............................................................................................................................138 15.4 Password Screen ..........................................................................................................................139 15.5 Time Screen ..................................................................................................................................140 15.6 Firmware Upgrade Screen ............................................................................................................142 15.7 Backup/Restore Screen ................................................................................................................143 15.8 Restart Screen ..............................................................................................................................144 15.9 Language Screen ..........................................................................................................................144 15.10 Remote Management Screen .....................................................................................................145 15.10.1 Remote Access .................................................................................................................145 15.10.2 Wake On LAN ....................................................................................................................147 15.11 Log Screen ..................................................................................................................................148 15.12 System Operation Mode Overview .............................................................................................149 15.13 Operation Mode Screen ..............................................................................................................150 Chapter 16 Troubleshooting................................................................................................................................152 16.1 Overview .......................................................................................................................................152 16.2 Power, Hardware Connections, and LEDs ....................................................................................152 16.3 NBG6815 Access and Login .........................................................................................................153 16.4 Internet Access .............................................................................................................................154 16.5 Resetting the NBG6815 to Its Factory Defaults ............................................................................156 16.6 Wireless Connections ...................................................................................................................156 16.7 USB Device Problems ...................................................................................................................158 Appendix A Pop-up Windows, JavaScript and Java Permissions ...................................................159 Appendix B Setting Up Your Computers IP Address ......................................................................168 Appendix C Common Services........................................................................................................194 Appendix D Legal Information .........................................................................................................197 Appendix E Customer Support ........................................................................................................205 Index .................................................................................................................................................. 211 NBG6815 Users Guide 8 PART I Users Guide 9 CHAPTER 1 Introduction 1.1 Overview This chapter introduces the main features and applications of the NBG6815. The NBG6815 extends the range of your existing wired network without additional wiring, providing easy network access to mobile users. You can set up a wireless network with other IEEE 802.11a/b/
g/n/ac compatible devices. The NBG6815 is able to function both 2.4GHz and 5GHz networks at the same time. A range of services such as a firewall and content filtering are also available for secure Internet computing. There are two USB 2.0 ports on the side panel of your NBG6815. You can connect USB (version 2.0 or lower) memory sticks, USB hard drives, or USB devices for file sharing. The NBG6815 automatically detects the USB devices. 1.2 Applications Your can have the following networks with the NBG6815:
Wired. You can connect network devices via the Ethernet ports of the NBG6815 so that they can communicate with each other and access the Internet. Wireless. Wireless clients can connect to the NBG6815 to access network resources. You can use WPS (Wi-Fi Protected Setup) to create an instant network connection with another WPS-
compatible device. WAN. Connect to a broadband modem/router for Internet access. 1.3 Ways to Manage the NBG6815 Use any of the following methods to manage the NBG6815. WPS (Wi-Fi Protected Setup). You can use the WPS button or the WPS section of the Web Configurator to set up a wireless network with your NBG6815. Web Configurator. This is recommended for everyday management of the NBG6815 using a
(supported) web browser. NBG6815 Users Guide 10 Chapter 1 Introduction 1.4 Good Habits for Managing the NBG6815 Do the following things regularly to make the NBG6815 more secure and to manage the NBG6815 more effectively. Change the password. Use a password thats not easy to guess and that consists of different types of characters, such as numbers and letters. Write down the password and put it in a safe place. Back up the configuration (and make sure you know how to restore it). Restoring an earlier working configuration may be useful if the device becomes unstable or even crashes. If you forget your password, you will have to reset the NBG6815 to its factory default settings. If you backed up an earlier configuration file, you would not have to totally re-configure the NBG6815. You could simply restore your last configuration. 1.5 Resetting the NBG6815 If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the RESET button at the back of the NBG6815 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to 1234 and the IP address will be reset to 192.168.1.1. 1.5.1 How to Use the RESET Button 1 Make sure the power LED is on. 2 3 Press the RESET button for one to four seconds to restart/reboot the NBG6815. Press the RESET button for longer than five seconds to set the NBG6815 back to its factory-default configurations. 1.6 The WPS Button Your NBG6815 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Each WPS connection works between two devices. Both devices must support WPS (check each devices documentation to make sure). Depending on the devices you have, you can either press a button (on the device itself, or in its configuration utility) or enter a PIN (a unique Personal Identification Number that allows one device to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two minutes to find another device that also has WPS activated. Then, the two devices connect and set up a secure network by themselves. You can use the WPS button (
quickly set up a wireless network with strong security.
) on the side panel of the NBG6815 to activate WPS in order to NBG6815 Users Guide 11 Chapter 1 Introduction 1 Make sure the power LED is on (not blinking). 2 Press the WPS button for more than three seconds and release it. Press the WPS button on another WPS-enabled device within range of the NBG6815. Note: You must activate WPS in the NBG6815 and in another wireless device within two minutes of each other. For more information on using WPS, see Section 8.2 on page 48. 1.7 LEDs Figure 1 Front Panel Internet WLAN 2.4G WAN Power WPS WLAN 5G USB The following table describes the front panel LEDs. Table 1 Front Panel LEDs COLOR LED Power/System White STATUS On Blinking Off DESCRIPTION The NBG6815 is receiving power and functioning properly. The NBG6815 is in the process of starting up, default restoring, or My ZyXEL Cloud Server online registration pairing. The NBG6815 is not receiving power. NBG6815 Users Guide 12 Chapter 1 Introduction COLOR White Table 1 Front Panel LEDs (continued) LED STATUS On WAN Blinking Off On Internet White Blinking Off On Blinking Off On Blinking Off On Blinking Off 5G WLAN White 2.4G WLAN White WPS White Figure 2 Rear Panel DESCRIPTION The NBG6815s WAN connection is ready. The NBG6815 is sending/receiving data through the WAN. The WAN connection is not ready, or has failed. The NBG6815 has an IP connection but no traffic. Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used) and the connection is up. The NBG6815 is sending or receiving IP traffic. The NBG6815 does not have an IP connection. The NBG6815 is ready and the 5GHz wireless LAN is on, but is not sending/receiving data through the wireless LAN. The NBG6815 is sending/receiving data through the wireless LAN. The wireless LAN is not ready or has failed. The NBG6815 is ready and the 2.4GHz wireless LAN is on, but is not sending/receiving data through the wireless LAN. The NBG6815 is sending/receiving data through the wireless LAN. The wireless LAN is not ready or has failed. WPS is enabled. The NBG6815 is in the process of firmware upgrading, configuration restoring, or resetting. The NBG6815 is negotiating a WPS connection with a wireless client. WPS is disabled. LAN 1-4 WAN NBG6815 Users Guide 13 CHAPTER 2 Introducing the Web Configurator 2.1 Overview This chapter describes how to access the NBG6815 Web Configurator and provides an overview of its screens. The Web Configurator is an HTML-based management interface that allows easy setup and management of the NBG6815 via Internet browser. Use a browser that supports HTML5, such as Internet Explorer 9.0 and later versions, Mozilla Firefox 21 and later versions, Safari 6.0 and later versions or Google Chrome 26.0 and later versions. The recommended screen resolution is 1024 by 768 pixels. In order to use the Web Configurator you need to allow:
Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in Windows XP SP (Service Pack) 2. JavaScript (enabled by default). Java permissions (enabled by default). Refer to the Troubleshooting chapter (Chapter 16 on page 152) to see how to make sure these functions are allowed in Internet Explorer. 2.2 Accessing the Web Configurator 1 Make sure your NBG6815 hardware is properly connected and prepare your computer or computer network to connect to the NBG6815 (refer to the Quick Start Guide). 2 3 Launch your web browser. The NBG6815 is in router mode by default. Type "http://192.168.1.1" as the website address. If the NBG6815 obtains a WAN IP address or a DNS server IP address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be changed to 10.0.0.1 automatically. See Auto-IP Change on page 69 for more information. If the NBG6815 is in access point, the IP address is 192.168.1.2. See Chapter 4 on page 26 for more information about the modes of the NBG6815. Your computer must be in the same subnet in order to access this website address. NBG6815 Users Guide 14 Chapter 2 Introducing the Web Configurator 2.2.1 Login Screen Note: If this is the first time you are accessing the Web Configurator, you may be redirected to the eaZy123 wizard. Refer to Chapter 3 on page 17 for the eaZy123 setup screens. The Web Configurator initially displays the following login screen. Figure 3 Login screen The following table describes the labels in this screen. Table 2 Login screen LABEL Password DESCRIPTION Type "1234" (default) as the password. Click Login. 2.2.2 Change Default Password Screen You should see a screen asking you to change your password (highly recommended) as shown next. NBG6815 Users Guide 15 Chapter 2 Introducing the Web Configurator Figure 4 Change Default Password Screen The following table describes the labels in this screen. DESCRIPTION Type a new password. Table 3 Change Default Password Screen LABEL Enter your new password here Confirm password Skip Change Retype the password for confirmation. Click Skip if you do not want to change the password this time. Click Change to save your changes back to the NBG6815. Note: The management session automatically times out when the time period set in the Administrator Inactivity Timer field expires (default five minutes; go to Chapter 15 on page 138 to change this). Simply log back into the NBG6815 if this happens. NBG6815 Users Guide 16 CHAPTER 3 eaZy 123 Wizard 3.1 Overview This chapter provides information on the eaZy 123 setup screens in the Web Configurator. The Web Configurators eaZy 123 setup wizard helps you configure your device to access the Internet. Refer to your ISP for your Internet account information. Leave a field blank if you dont have that information. 3.2 Accessing the eaZy 123 Wizard Launch your web browser and type "http://192.168.1.1" as the website address. Type "1234"
(default) as the password and click Login. Note: The eaZy 123 wizard appears automatically when the NBG6815 is accessed for the first time or when you reset the NBG6815 to its default factory settings. If you didnt configure the wizard screens, you will be redirected to the login page when you connect to the Internet. If you have already configured the wizard screens and want to open it again, click upper right corner of any Web Configurator screen. The eaZy 123 wizard attempts to detect which WAN connection type you are using. on the If the eaZy 123 wizard does not detect a connection type, you must select one from the drop-down list box. Check with your ISP to make sure you use the correct type. If you do not have the Internet connection, the following screen opens. NBG6815 Users Guide 17 Chapter 3 eaZy 123 Wizard Figure 5 Unable to continue: WAN If you do not press the Wi-Fi button lcated on the NBG6815s back panel, the following screen opens. Figure 6 Unable to continue: Wi-Fi Note: If you get an error message, check your hardware connections. Make sure your Internet connection is up and running. The wizard screen opens. NBG6815 Users Guide 18 Chapter 3 eaZy 123 Wizard Figure 7 Detecting your Internet Connection Type Figure 8 eaZy 123 Setup 3.3 Internet Type The NBG6815 offers three WAN selection types. They are Automatic - DHCP, PPPoE or Static. Configure the Internet type settings on your NBG6815 in the first part. The following screen depends on your Internet connection type. Enter the details provided by your Internet Service Provider (ISP) in the fields (if any). Check with your ISP to make sure you use the correct type. This wizard screen varies according to the connection type that you select. NBG6815 Users Guide 19 Chapter 3 eaZy 123 Wizard 3.3.1 WAN Selection Type: Automatic - DHCP Select the Automatic - DHCP option if your ISP did not assign you a fixed IP address. Figure 9 WAN Selection Type: Automatic - DHCP 3.3.2 WAN Selection Type: PPPoE Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an IETF
(Internet Engineering Task Force) standard specifying how a host personal computer interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access to high-speed data networks. For the service provider, PPPoE offers an access and authentication method that works with existing access control systems (for instance, RADIUS). One of the benefits of PPPoE is the ability to let end users access one of multiple network services, a function known as dynamic service selection. This enables the service provider to easily create and offer new IP services for specific users. Operationally, PPPoE saves significant effort for both the subscriber and the ISP/carrier, as it requires no specific configuration of the broadband modem at the subscriber's site. By implementing PPPoE directly on the NBG6815 (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the NBG6815 does that part of the task. Furthermore, with NAT, all of the LAN's computers will have Internet access. NBG6815 Users Guide 20 Chapter 3 eaZy 123 Wizard Figure 10 WAN Selection Type: PPPoE The following table describes the labels in this screen. Table 4 WAN Selection Type: PPPoE LABEL WAN Selection DESCRIPTION Select the PPPoE (Point-to-Point Protocol over Ethernet) option for a dial-up connection. Type the user name given to you by your ISP. Type the password associated with the user name above. PPPoE Username PPPoE Password Static IP (Optional) Enter the WAN IP address assigned by your ISP. Note: If you get an error message, make sure you have entered the correct information provided by your ISP. 3.3.3 WAN Selection Type: Static Choose Static as the WAN Selection Type when the WAN port is used as a regular Ethernet. Click Next. NBG6815 Users Guide 21 Chapter 3 eaZy 123 Wizard Figure 11 WAN Selection Type: Static The following table describes the labels in this screen. Table 5 WAN Selection Type: Static LABEL WAN Selection IP Address Subnet Mask Gateway IP Address
(Optional) DESCRIPTION Select the Static option when the WAN port is using a fixed IP address. Enter the IP address provided by your ISP. Enter the IP subnet mask in this field. Enter the gateway IP address in this field. Note: If you get an error screen, make sure your Internet connection is working and select the right WAN Selection Type. Contact your ISP if you are not sure of your Internet Connection type. 3.4 Wireless Network Configure the wireless network settings on your NBG6815 in the second part. The default wireless security setting is WPA2-PSK. NBG6815 Users Guide 22 Chapter 3 eaZy 123 Wizard Figure 12 Wireless Network The following table describes the labels in this screen. Table 6 Wireless Network LABEL Wireless Name
(SSID) DESCRIPTION Enter a descriptive name for the wireless LAN. Note: The setting here applies to 2.4 GHz wireless radios. If you change this field on the NBG6815, make sure all wireless stations use the same SSID in order to access the network. Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless connection by configuring WPA in the wireless LAN screens. Select this check box to configure different SSID and wireless security settings for the NBG6815s 5 GHz wireless network. If you do not select this option, the NBG6815 uses the same SSID and Wi-Fi key (you configue above) for the 5 GHZ wireless network. Enter a descriptive name for the wireless LAN. If you change this field on the NBG6815, make sure all wireless stations use the same SSID in order to access the network. Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless connection by configuring WPA in the wireless LAN screens. Wireless Password
(WPA2) Edit 5 GHz wireless network 5GHz Wireless Name (SSID) 5GHz Wireless Password
(WPA2) Click the Apply button in the third part to save your settings. NBG6815 Users Guide 23 Chapter 3 eaZy 123 Wizard Figure 13 Apply your Wi-Fi settings Congratulations! Open a web browser, such as Internet Explorer, to visit your favorite website. Note: If you cannot access the Internet when your computer is connected to one of the NBG6815s LAN ports, check your connections. Then turn the NBG6815 off, wait for a few seconds then turn it back on. If that does not work, log in to the web configurator again and check you have typed all information correctly. See the Users Guide for more suggestions. Figure 14 Congratulations You can click the My ZyXEL Cloud Service button to go to https://mycloud.zyxel.com, where you can create an account and register your NBG6815. At the time of writing, you can have free DDNS NBG6815 Users Guide 24 Chapter 3 eaZy 123 Wizard service to get a domain name mapped to the NBG6815s dynamic IP address. With DDNS, you can use the domain name to remotely access the NBG6815s Web Configurator through the Internet. You have successfully set up your NBG6815 to operate on your network and access the Internet. NBG6815 Users Guide 25 CHAPTER 4 NBG6815 Modes 4.1 Overview This chapter introduces the different modes available on your NBG6815. First, the term mode refers to two things in this Users Guide. Web Configurator mode. This refers to the Web Configurator interface you want to use for editing NBG6815 features. Device mode. This is the operating mode of your NBG6815, or simply how the NBG6815 is being used in the network. 4.1.1 Web Configurator Modes This refers to the configuration interface of the Web Configurator, which has two modes:
Easy: The Web Configurator shows this mode by default. Refer to Chapter 5 on page 27 for more information on the screens in this mode. This interface may be sufficient for users who just want to use the device. Expert: Advanced users can change to this mode to customize all the functions of the NBG6815. Click > Expert Mode after logging into the Web Configurator. The Users Guide Chapter 9 on page 59 through Chapter 15 on page 150 discusses the screens in this mode. 4.1.2 Device Modes This refers to the operating mode of the NBG6815, which can act as a:
Router: This is the default device mode of the NBG6815. Use this mode to connect the local network to another network, like the Internet. Go to Section 6.2 on page 35 to view the Status screen in this mode. Access Point: Use this mode if you want to extend your network by allowing network devices to connect to the NBG6815 wirelessly. Go to Section 7.4 on page 43 to view the Status screen in this mode. For more information on these modes and to change the mode of your NBG6815, refer to Chapter 15 on page 150. The menu for changing device modes is available in Expert Mode only. Note: Choose your device mode carefully to avoid having to change it later. When changing to another mode, the IP address of the NBG6815 changes. The running applications and services of the network devices connected to the NBG6815 can be interrupted. NBG6815 Users Guide 26 CHAPTER 5 Easy Mode 5.1 Overview The Web Configurator is set to Easy Mode by default. You can configure several key features of the NBG6815 in this mode. This mode is useful to users who are not fully familiar with some features that are usually intended for network administrators. When you log in to the Web Configurator, the following screen opens. Figure 15 Easy Mode Navigation Panel Network Map Go to Status Screen
(Expert Mode) Control Panel 5.2 What You Can Do You can do the following in this mode:
Use this Navigation Panel to open the eaZy123 wizard or log out the NBG6815 (Section 5.4 on page 28). Use the Network Map screen to check if your NBG6815 is connected to the Internet (Section 5.5 on page 28). Use the Control Panel to configure and enable NBG6815 features, including guest Wi-Fi, wireless security, parental control and so on (Section 5.6 on page 30). NBG6815 Users Guide 27 Chapter 5 Easy Mode 5.3 What You Need to Know Between the different device modes, the Control Panel (Section 5.6 on page 30) changes depending on which features are applicable to the mode:
Router Mode: All Control Panel features are available. Access Point Mode: Parental Control and Notification are not available. 5.4 Navigation Panel Use this navigation panel to opt out of the Easy mode. Figure 16 Easy Mode: Navigation Panel The following table describes the labels in this screen. Table 7 Easy Mode: Navigation Panel DESCRIPTION ITEM Click this icon to open a screen where you can click Check here to redirect your screen to the firmware upgrade page. Firmware Notification This icon only displays when new firmware is released. Wizard Click this icon to open the eaZy123 wizard for the NBG6815. Logout Click this to end the Web Configurator session. Figure 17 Easy Mode: Navigation Panel: Firmware Notification 5.5 Network Map When you log into the Web Configurator, the Network Map is shown as follows. NBG6815 Users Guide 28 Chapter 5 Easy Mode Figure 18 Easy Mode: Network Map This screen displays whether the NBG6815 connects to the Internet. It also shows the devices connected to the NBG6815, including those connecting wirelessly. Click the Refresh button to refresh the network map. The following table describes the icons in this screen. Table 8 Easy Mode: Network Map ITEM DESCRIPTION This icon shows the NBG6815s connection status. This icon is grayed out if the user is unable to access the Internet. Click this button to refresh the NBG6815s connection status and the network map. Info Block Click this to view the devices information that is currently connected to the NBG6815. Click this to block the device from accessing the Internet through the NBG6815. Rename / Icon Click this to rename the device or change the devices icon. Figure 19 Easy Mode: Network Map: Info NBG6815 Users Guide 29 Chapter 5 Easy Mode Figure 20 Easy Mode: Network Map: Rename / Icon Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. 5.6 Control Panel The features configurable in Easy Mode are shown in the Control Panel. Figure 21 Easy Mode: Control Panel Switch ON to enable the feature. Otherwise, switch OFF. If the feature is turned on, the green light flashes. If it is turned off, the blue light flashes. Additionally, click the feature to open a screen where you can edit its settings. The following table describes the labels in this screen. Table 9 Easy Mode: Control Panel ITEM Wi-Fi DESCRIPTION Click this to configure wireless radio, SSID, security mode and wireless password for the NBG6815's default Wi-Fi network. Guest Wi-Fi Refer to Section 5.6.5 on page 34 to see this screen. Click this to configure wireless and wireless security settings for the guest Wi-Fi network. NBG6815 Users Guide 30 Chapter 5 Easy Mode Table 9 Easy Mode: Control Panel (continued) ITEM Parental Control DESCRIPTION Switch ON to enable parental control, and click this to view the parental control rules. Otherwise, switch OFF. Notification LED Refer to Section 5.6.3 on page 33 to see this screen. Switch ON to have the NBG6815 send e-mail notifications when the user(s) is connected to the NBG6815 for Internet access during the specified time periods. Otherwise, switch OFF. Refer to Section 5.6.4 on page 34 to see this screen. Switch ON to have the NBG6815's LEDs (lights) stay lit/blinking. Otherwise, switch OFF. 5.6.1 Wi-Fi Use this screen to configure security for the NBG6815's default wireless LAN. You can enter the SSID and select the wireless security mode in the following screen. See Chapter 14 on page 132 for how to configure wireless network. Note: You can enable the wireless function of your NBG6815 by first turning on the WIFI switch in the back panel. Figure 22 Easy Mode: Wi-Fi NBG6815 Users Guide 31 Chapter 5 Easy Mode The following table describes the labels in this screen. Table 10 Easy Mode: Wi-Fi LABEL Wireless Radio DESCRIPTION Choose whether you want to apply the wireless security to 2.4G Hz, 5G Hz or Both wireless radios.
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN. Select WPA2-PSK to enable data encryption. Or Select No Security to allow wireless clients to communicate with the access points without any data encryption. This field appears when you choose wither WPA2-PSK as the security mode. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Type the password again to confirm. Click Cancel to reload the previous configuration for this screen. Click Apply to save your changes back to the NBG6815. Network Name
(SSID) Security Mode Password Verify Password Cancel Apply 5.6.2 Guest Wi-Fi This screen allows you to configure guest wireless network settings on the NBG6815. Users connected to the guest wireless network can access the Internet via the NBG6815, but not other networks connected to the NBG6815. See Chapter 11 on page 84 for how to enable and set up the guest wireless network. Figure 23 Easy Mode: Guest Wi-Fi NBG6815 Users Guide 32 Chapter 5 Easy Mode The following table describes the labels in this screen. Network Name
(SSID) Table 11 Easy Mode: Guest Wi-Fi DESCRIPTION LABEL Choose whether you want to apply the wireless settings to the 2.4G Hz or 5G Hz Wireless Radio wireless radio. The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the guest wireless network. Select WPA2-PSK to enable data encryption. Or select No Security to allow wireless clients to communicate with the NBG6815 without any data encryption. This field appears when you choose WPA2-PSK as the security mode. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Type the password again to confirm. Click Cancel to reload the previous configuration for this screen. Click Apply to save your changes back to the NBG6815. Verify Password Cancel Apply Security Mode Password 5.6.3 Parental Control Use this screen to view the parental control rules configured on the NBG6815. See Section 13.2 on page 110 for how to enable and configure parental control rules. Figure 24 Easy Mode: Parental Control The following table describes the labels in this screen. Table 12 Easy Mode: Parental Control LABEL Status DESCRIPTION This indicates whether the rule is active or not. User Name Schedule Bonus Remaining time A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This shows the name of the user to which this rule applies. This shows whether the user is allowed to access the Internet (Allow) or not (Block). If the user is currently not permitted to access the Internet, you can click the Bonus to allow access for a specified period of time. A screen then displays allowing you to set how long (in minutes) the user is allowed to access the Internet. This button is grayed out if the user is now able to access the Internet. This field displays the amount of Internet access time that remains for each user before the NBG6815 blocks the user from accessing the Internet. None means there is no extra Internet access time. NBG6815 Users Guide 33 Chapter 5 Easy Mode 5.6.4 Notification Use this screen to view the e-mail notification rules configured on the NBG6815. See Section 13.2.2 on page 114 for how to configure e-mail notification rules and e-mail settings. Figure 25 Easy Mode: Notification The following table describes the labels in this screen. Table 13 Easy Mode: Notification LABEL DESCRIPTION Notification Status This indicates whether the rule is active or not. User Name Notification A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This shows the name of the user to which this rule applies. This shows the e-mail address to which the notification is sent. 5.6.5 LED Switch ON to turn on the LEDs (lights) on the NBG6815. Otherwise, switch OFF. NBG6815 Users Guide 34 CHAPTER 6 Router Mode 6.1 Overview The NBG6815 is set to router mode by default. Routers are used to connect the local network to another network (for example, the Internet). In the figure below, the NBG6815 connects the local network (LAN1 ~ LAN4) to the Internet. Figure 26 NBG6815 Network Modem Note: After clicking Login, the Easy Mode appears. Refer to Chapter 5 on page 27 for the Easy Mode screens. Change to Expert Mode to see the screens described in the sections following this. 6.2 Router Mode Status Screen Click Expert Mode > Status > System Status to open the status screen. NBG6815 Users Guide 35 Chapter 6 Router Mode Figure 27 Expert Mode: Status > System Status: Router Mode The following table describes the labels shown in the Status screen. DESCRIPTION Table 14 Expert Mode: Status > System Status: Router Mode LABEL Device Information Item Data Host Name This column shows the type of data the NBG6815 is recording. This column shows the actual data recorded by the NBG6815. This is the System Name you enter in the Maintenance > General screen. It is for identification purposes. This is the model name of your device. This is the firmware version. This is the device mode (Section 4.1.2 on page 26) to which the NBG6815 is set - Router Mode. Model Number Firmware Version Sys OP Mode WAN Information MAC Address IP Address IP Subnet Mask Default Gateway IPv6 Address LAN Information This shows the WAN Ethernet adapter MAC Address of your device. This shows the WAN ports IP address. This shows the WAN ports subnet mask. This shows the WAN ports gateway IP address. This shows the IPv6 address of the NBG6815 on the WAN. NBG6815 Users Guide 36 Chapter 6 Router Mode Table 14 Expert Mode: Status > System Status: Router Mode (continued) LABEL DESCRIPTION This shows the LAN Ethernet adapter MAC Address of your device. This shows the LAN ports IP address. This shows the LAN ports subnet mask. This shows the LAN ports DHCP role - Server or Disable. This shows the IPv6 address of the NBG6815 on the LAN. MAC Address IP Address IP Subnet Mask DHCP IPv6 Address WLAN 2.4G Information WLAN OP Mode MAC Address SSID Channel Security WLAN 5G Information WLAN OP Mode MAC Address SSID Channel Security Firewall System Status System Up Time Current Date/Time System Resource
- CPU Usage
- Memory Usage Interface Status Interface Status Rate This is the device mode (Section 4.1.2 on page 26) to which the NBG6815s wireless LAN is set - Access Point Mode. This shows the 2.4GHz wireless adapter MAC Address of your device. This shows a descriptive name used to identify the NBG6815 in the 2.4GHz wireless LAN. This shows the channel number which you select manually. This shows the level of wireless security the NBG6815 is using. This is the device mode (Section 4.1.2 on page 26) to which the NBG6815s wireless LAN is set - Access Point Mode. This shows the 5GHz wireless adapter MAC Address of your device. This shows a descriptive name used to identify the NBG6815 in the 5GHz wireless LAN. This shows the channel number which you select manually. This shows the level of wireless security the NBG6815 is using. This shows whether the firewall is enabled or not. This is the total time the NBG6815 has been on. This field displays your NBG6815s present date and time. This displays what percentage of the NBG6815s processing ability is currently used. When this percentage is close to 100%, the NBG6815 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management.) This shows what percentage of the heap memory the NBG6815 is using. This displays the NBG6815 port types. The port types are: WAN, LAN and WLAN. For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or connected). For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or Down when the 2.4G/5G WLAN is disabled. For the LAN ports, this displays the port speed and duplex setting or is left blank when the line is disconnected. For the WAN port, it displays the port speed and duplex setting if youre using Ethernet encapsulation. This field displays N/A when the line is disconnected. For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled. NBG6815 Users Guide 37 Chapter 6 Router Mode Table 14 Expert Mode: Status > System Status: Router Mode (continued) LABEL Printer Information DESCRIPTION Printer Name The NBG6815 can act as a print server and allows you to share a USB printer on your LAN. This displays the name of the printer connected to the NBG6815's USB port. Note: You need to manually install the printer driver in your computer and add the printer to your printer list. 6.2.1 Navigation Panel Use the sub-menus on the navigation panel to configure NBG6815 features. Figure 28 Expert Mode: Navigation Panel: Router Mode The following table describes the sub-menus. Table 15 Expert Mode: Navigation Panel: Router Mode LINK Status System Status FUNCTION TAB Live Network Monitor Usage Monitor Common Usage Download Traffic Statistics DHCP Table WAN Internet Connection This screen shows the NBG6815s general device, system and interface status information. Use this screen to access the wizard, and summary statistics tables. This screen shows transmission data rates between the NBG6815 and the Internet or connected devices. This screen shows transmission data and bandwidth usage between the NBG6815 and the Internet or connected devices. This screen shows the top five traffic flows transmitting from/to the selected LAN device(s). This screen shows the type and percentage of most download traffic. Use this screen to view current DHCP client information. This screen allows you to configure ISP parameters, WAN IP address assignment, DNS servers and the WAN MAC address. NBG6815 Users Guide 38 Chapter 6 Router Mode Table 15 Expert Mode: Navigation Panel: Router Mode (continued) LINK NAT FUNCTION Use this screen to enable NAT. TAB General Port Trigger Use this screen to configure servers behind the NBG6815 and forward incoming service requests to the server(s) on your local network. Use this screen to change your NBG6815s port triggering settings. Use this screen to set up dynamic DNS. Dynamic DNS Wireless Wireless Guest Wireless MAC Filter Advanced WPS Scheduling LAN LAN IP Static DHCP IPv6 LAN Applications Parental Control General Notification Bandwidth Priorities SAMBA FTP Bandwidth Management USB Media Sharing UPnP File Sharing One Connect Security IPv4 Firewall IPv6 Firewall Maintenance General Password Use this screen to enable the wireless LAN and configure wireless LAN and wireless security settings. Use this screen to configure multiple BSSs on the NBG6815. Use the MAC filter screen to configure the NBG6815 to block access to devices or block the devices from accessing the NBG6815. This screen allows you to configure advanced wireless settings. Use this screen to configure WPS. Use this screen to schedule the times the Wireless LAN is enabled. Use this screen to configure LAN IP address and subnet mask. Use this screen to configure the IPv6 address for the NBG6815 on the LAN. Use this screen to enable the NBG6815s DHCP server. This screen allows you to assign IP addresses on the LAN to specific individual computers based on their MAC addresses. Use this screen to configure the IPv6 address for your NBG6815 on the LAN. Use this screen to enable parental control, set parental controls rules/
schedules and block web sites containing certain keywords in the URL. Use this screen to send e-mail notifications, configure e-mail notification rules and e-mail settings. Use this screen to enable StreamBoost. Use this screen to configure the maximum allowable bandwidth and enable automatic update. Use this screen to change the priority of the conencted devices. Use this screen to have the NBG6815 function as a DLNA-compliant media server, that lets DLNA-compliant media clients play video, audio, and photo content files stored on the connected USB storage device. Use this screen to enable UPnP on the NBG6815. Use this screen to enable file sharing through the NBG6815. Use this screen to have the NBG6815 act as a FTP server. Use this screen to enable or disable Wi-Fi auto-configuration. Use this screen to configure IPv4 firewall rules. Use this screen to configure IPv6 firewall rules. Use this screen to view and change administrative settings such as system and domain names. Use this screen to change the password of your NBG6815. NBG6815 Users Guide 39 Chapter 6 Router Mode TAB Table 15 Expert Mode: Navigation Panel: Router Mode (continued) LINK Time Firmware Upgrade Backup/Restore FUNCTION Use this screen to change your NBG6815s time and date. Use this screen to upload firmware to your NBG6815. Restart Language Remote Management Remote Access Use this screen to backup and restore the configuration or reset the factory defaults to your NBG6815. This screen allows you to reboot the NBG6815 without turning the power off. This screen allows you to select the language you prefer. Use this screen to configure through which interface(s) and from which IP address(es) users can use Telnet and HTTP/HTTPS to manage the NBG6815. Log Operation Mode Wake On LAN Use this screen to enable Wake on LAN to remotely turn on a device on the local network. Use this screen to view the list of activities recorded by your NBG6815. This screen allows you to select whether your device acts as a router, or an access point. NBG6815 Users Guide 40 CHAPTER 7 Access Point Mode 7.1 Overview Use your NBG6815 as an access point (AP) if you already have a router or gateway on your network. In this mode your NBG6815 bridges a wired network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example. Figure 29 Wireless Internet Access in Access Point Mode Many screens that are available in Router Mode are not available in Access Point Mode, such as bandwidth management and firewall. 7.2 What You Can Do Use the Status screen to view read-only information about your NBG6815 (Section 7.4 on page 43). Use the LAN screen to set the IP address for your NBG6815 acting as an access point (Section 7.5 on page 45). 7.3 What You Need to Know See Chapter 8 on page 48 for a tutorial on setting up a network with the NBG6815 as an access point. NBG6815 Users Guide 41 Chapter 7 Access Point Mode 7.3.1 Setting your NBG6815 to AP Mode 1 2 Log into the Web Configurator if you havent already. See the Quick start Guide for instructions on how to do this. To use your NBG6815 as an access point, go to Expert Mode > Maintenance > Operation Mode and select Access Point Mode. Figure 30 Changing to Access Point mode Note: You have to log in to the Web Configurator again when you change modes. As soon as you do, your NBG6815 is already in Access Point mode. 3 When you select Access Point Mode, the following pop-up message window appears. Figure 31 Pop up for Access Point mode Click OK. Then click Apply. The Web Configurator refreshes once the change to Access Point mode is successful. 7.3.2 Accessing the Web Configurator in Access Point Mode Log in to the Web Configurator in Access Point mode, do the following:
1 2 3 Connect your computer to the LAN port of the NBG6815. The default IP address of the NBG6815 is 192.168.1.2. In this case, your computer must have an IP address in the range between 192.168.1.3 and 192.168.1.254. Click Start > Run on your computer in Windows. Type cmd in the dialog box. Enter ipconfig to show your computers IP address. If your computers IP address is not in the correct range then see Appendix B on page 168 for information on changing your computers IP address. NBG6815 Users Guide 42 Chapter 7 Access Point Mode 4 After youve set your computers IP address, open a web browser such as Internet Explorer and type 192.168.1.2 as the web address in your web browser. Note: After clicking Login, the Easy Mode appears. Refer to Section on page 27 for the Easy Mode screens. Change to Expert Mode to see the screens described in the sections following this. 7.3.3 Configuring your WLAN and Maintenance Settings The configuration of wireless and maintenance settings in Access Point Mode is the same as for Router Mode. See Chapter 11 on page 84 for information on the configuring your wireless network. See Chapter 15 on page 138 for information on configuring your Maintenance settings. 7.4 AP Mode Status Screen Click Expert Mode > Status to open the Status screen. Figure 32 Expert Mode: Status > System Status: Access Point Mode NBG6815 Users Guide 43 Chapter 7 Access Point Mode The following table describes the labels shown in the Status screen. Table 16 Expert Mode: Status > System Status: Access Point Mode LABEL Device Information Host Name DESCRIPTION Model Number Firmware Version Sys OP Mode LAN Information MAC Address IP Address IP Subnet Mask DHCP IPv6 Address WLAN 2.4G Information WLAN OP Mode MAC Address SSID Channel Security WLAN 5G Information WLAN OP Mode MAC Address SSID Channel Security System Status Item Data System Up Time Current Date/Time System Resource
- CPU Usage
- Memory Usage Interface Status Interface Status This is the System Name you enter in the Maintenance > General screen. It is for identification purposes. This is the model name of your device. This is the firmware version and the date created. This is the device mode (Section 4.1.2 on page 26) to which the NBG6815 is set - AP Mode. This shows the LAN Ethernet adapter MAC Address of your device. This shows the LAN ports IP address. This shows the LAN ports subnet mask. This shows the LAN ports DHCP role - Client or None. This shows the IPv6 address of the NBG6815 on the LAN. This is the device mode (Section 4.1.2 on page 26) to which the NBG6815s wireless LAN is set - Access Point Mode. This shows the 2.4GHz wireless adapter MAC Address of your device. This shows a descriptive name used to identify the NBG6815 in the 2.4GHz wireless LAN. This shows the channel number which you select manually. This shows the level of wireless security the NBG6815 is using. This is the device mode (Section 4.1.2 on page 26) to which the NBG6815s wireless LAN is set - Access Point Mode. This shows the 5GHz wireless adapter MAC Address of your device. This shows a descriptive name used to identify the NBG6815 in the 5GHz wireless LAN. This shows the channel number which you select manually. This shows the level of wireless security the NBG6815 is using. This column shows the type of data the NBG6815 is recording. This column shows the actual data recorded by the NBG6815. This is the total time the NBG6815 has been on. This field displays your NBG6815s present date and time. This displays what percentage of the NBG6815s processing ability is currently used. When this percentage is close to 100%, the NBG6815 is running at full load, and the throughput is not going to improve anymore. If you want some applications to have more throughput, you should turn off other applications (for example, using bandwidth management.) This shows what percentage of the heap memory the NBG6815 is using. This displays the NBG6815 port types. The port types are: LAN and WLAN. For the LAN ports, this field displays Down (line is down) or Up (line is up or connected). For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or Down when the 2.4G/5G WLAN is disabled. NBG6815 Users Guide 44 Chapter 7 Access Point Mode Table 16 Expert Mode: Status > System Status: Access Point Mode (continued) LABEL Rate DESCRIPTION For the LAN ports, this displays the port speed and duplex setting or is left blank when the line is disconnected. For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled. Printer Information Printer Name The NBG6815 can act as a print server and allows you to share a USB printer on your LAN. This displays the name of the printer connected to the NBG6815's USB port. Note: You need to manually install the printer driver in your computer and add the printer to your printer list. 7.4.1 Navigation Panel Use the menu in the navigation panel to configure NBG6815 features in Access Point Mode. Figure 33 Expert Mode: Navigation Panel: Access Point Mode Refer to Table 15 on page 38 for descriptions of the labels shown in the navigation panel. 7.5 LAN Screen Use this section to configure your LAN settings while in Access Point Mode. Click Expert Mode > LAN to see the screen below. Note: If you change the IP address of the NBG6815 in the screen below, you will need to log into the NBG6815 again using the new IP address. NBG6815 Users Guide 45 Chapter 7 Access Point Mode Figure 34 LAN > LAN IP The table below describes the labels in the screen. Table 17 LAN > LAN IP LABEL IP Address Obtain an IP Address Automatically Static IP Address IP Address Subnet Mask Gateway IP Address DNS Server First DNS Server Second DNS Server Third DNS Server DESCRIPTION When you enable this, the NBG6815 gets its IP address from the networks DHCP server (for example, your ISP). Users connected to the NBG6815 can now access the network (i.e., the Internet if the IP address is given by the ISP). The Web Configurator may no longer be accessible unless you know the IP address assigned by the DHCP server to the NBG6815. You need to reset the NBG6815 to be able to access the Web Configurator again (see Section 15.7 on page 143 for details on how to reset the NBG6815). Also when you select this, you cannot enter an IP address for your NBG6815 in the field below. Click this if you want to specify the IP address of your NBG6815. Or if your ISP or network administrator gave you a static IP address to access the network or the Internet. Type the IP address in dotted decimal notation. The default setting is 192.168.1.2. If you change the IP address you will have to log in again with the new IP address. The subnet mask specifies the network number portion of an IP address. Your NBG6815 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the NBG6815. Enter a Gateway IP Address (if your ISP or network administrator gave you one) in this field. Select Obtained From ISP if your ISP dynamically assigns DNS server information
(and the NBG6815's WAN IP address). The field to the right displays the (read-
only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. If you chose User-Defined, but leave the IP address set to 0.0.0.0, User-Defined changes to None after you click Apply. If you set a second choice to User-Defined, and enter the same IP address, the second User-Defined changes to None after you click Apply. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. NBG6815 Users Guide 46 Chapter 7 Access Point Mode Table 17 LAN > LAN IP (continued) LABEL Apply Cancel DESCRIPTION Click Apply to save your changes to the NBG6815. Click Cancel to reload the previous configuration for this screen. NBG6815 Users Guide 47 CHAPTER 8 Tutorials 8.1 Overview This chapter provides tutorials for setting up your NBG6815. Set Up a Wireless Network Using WPS Connect to NBG6815 Wireless Network without WPS Using Guest SSIDs on the NBG6815 8.2 Set Up a Wireless Network Using WPS This section gives you an example of how to set up wireless network using WPS. This example uses the NBG6815 as the AP and NWD210N as the wireless client which connects to a notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). There are two WPS methods for creating a secure connection via the web configurator or utility. This tutorial shows you how to do both. Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 8.2.1 on page 48. This is the easier method. PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the NBG6815s interface. See Section 8.2.2 on page 49. This is the more secure method, since one device can authenticate the other. 8.2.1 Push Button Configuration (PBC) 1 Make sure that your NBG6815 is turned on. Make sure the WIFI button (at the back panel of the NBG6815) is pushed in, and that the device is placed within range of your notebook. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 4 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) Log into NBG6815s Web Configurator and press the Push Button in the Expert > Wireless >
WPS screen. NBG6815 Users Guide 48 Chapter 8 Tutorials Note: Your NBG6815 has a WPS button located on its front panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesnt matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The NBG6815 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG6815 securely. The following figure shows you an example to set up wireless network and security by pressing a button on both NBG6815 and wireless client (the NWD210N in this example). Figure 35 Example WPS Process: PBC Method Wireless Client Access Point WITHIN 2 MINUTES WPS SECURITY INFO COMMUNICATION 8.2.2 PIN Configuration When you use the PIN configuration method, you need to use both NBG6815s configuration interface and the clients utilities. 1 2 Launch your wireless clients configuration utility. Go to the WPS settings and select the PIN method to get a PIN number. Enter the PIN number to the PIN field in the Expert > Wireless > WPS screen on the NBG6815. NBG6815 Users Guide 49 Chapter 8 Tutorials 3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the NBG6815s WPS screen within two minutes. The NBG6815 authenticates the wireless client and sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG6815 securely. The following figure shows you the example to set up wireless network and security on NBG6815 and wireless client (ex. NWD210N in this example) by using PIN method. Figure 36 Example WPS Process: PIN Method Wireless Client Access Point WITHIN 2 MINUTES 8.3 Connect to NBG6815 Wireless Network without WPS This example shows you how to configure wireless security settings with the following parameters on your NBG6815 and connect your computer to the NBG6815 wireless network. Band SSID Channel Security 2.4GHz SSID_Example3 6 WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey) Follow the steps below to configure the wireless settings on your NBG6815. NBG6815 Users Guide 50 Chapter 8 Tutorials The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 2.2 on page 14). 1 Make sure the WIFI switch (at the back panel of the NBG6815) is set to ON. 2 Open the Expert > Wireless > Wireless screen in the APs Web Configurator. 3 4 5 Confirm that the wireless LAN is enabled on the NBG6815. Select to configure the wireless settings for the 2.4GHz wireless radio. Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security mode to WPA2-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply. 6 Click Expert > Status to open the Status screen. Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status. NBG6815 Users Guide 51 Chapter 8 Tutorials 8.3.1 Configure Your Notebook Note: In this example, we use the ZyXEL NWD6505 wireless adapter as the wireless client and use the Windows built-in utility (Windows Zero Configuration (WZC)) to connect to the wireless netwok. 1 The NBG6815 supports IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n and IEEE 802.11ac wireless clients. Make sure that your notebook or computers wireless adapter supports one of these standards. 2 Wireless adapters come with software sometimes called a utility that you install on your computer. See your wireless adapters Users Guide for information on how to do that. 3 4 After youve installed the driver and attached the NWD6505 to your computers USB port, right-
click the Wireless Network Connection icon in your computers system tray, select and click View Available Wireless Networks. The Wireless Network Connection screen displays. Click Refresh network list to view the available wireless APs within range. NBG6815 Users Guide 52 Chapter 8 Tutorials 5 Select SSID_Example3 and click Connect. 6 Type the security key in the following screen. Click Connect. NBG6815 Users Guide 53 Chapter 8 Tutorials 7 Check the status of your wireless connection in the screen below. 8 If the wireless client keeps trying to connect to or acquiring an IP address from the NBG6815, make sure you entered the correct security key. If the connection has limited or no connectivity, make sure the DHCP server is enabled on the NBG6815. If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the URL of any other web site in the address bar. If you are able to access the web site, your wireless connection is successfully configured. 8.4 Using Guest SSIDs on the NBG6815 You can configure more than one guest SSID on a NBG6815. See Section 11.4 on page 94. This allows you to configure multiple independent wireless networks on the NBG6815 as if there were multiple APs (virtual APs). Each guest SSID has its own wireless security type. That is, each SSID on the NBG6815 represents a different access point/wireless network to wireless clients in the network. Clients can associate only with the SSIDs for which they have the correct security settings. Clients using different SSIDs can access the Internet and the wired network behind the NBG6815 (such as a printer). NBG6815 Users Guide 54 Chapter 8 Tutorials For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for guests and C is specific to a VoIP device in the meeting room. A SSID_Worker C SSID_VoIP B SSID_Guest 8.4.1 Configuring Security Settings of Guest SSIDs The NBG6815 is in router mode by default. This example shows you how to configure the SSIDs with the following parameters on your NBG6815 (in router mode). SSID SSID_Worker SSID_VoIP SSID_Guest SECURITY TYPE WPA2-PSK WPA Compatible WPA-PSK WPA-PSK KEY DoNotStealMyWirelessNetwork VoIPOnly12345678 keyexample123 1 2 3 4 5 6 Connect your computer to the LAN port of the NBG6815 using an Ethernet cable. The default IP address of the NBG6815 in router mode is 192.168.1.1. In this case, your computer must have an IP address in the range between 192.168.1.2 and 192.168.1.254. Click Start > Run on your computer in Windows. Type cmd in the dialog box. Enter ipconfig to show your computers IP address. If your computers IP address is not in the correct range then see Appendix B on page 168 for information on changing your computers IP address. After youve set your computers IP address, open a web browser such as Internet Explorer and type http://192.168.1.1 as the web address in your web browser. Enter 1234 (default) as the password and click Login. Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore. NBG6815 Users Guide 55 Chapter 8 Tutorials 7 The Easy Mode appears. 8 Go to Expert > Wireless > Guest Wireless. Click the Edit icon of the first entry to configure wireless and security settings for SSID_Worker. 9 Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Worker to allow wireless clients in the same wireless network to communicate with each other. Click Apply. 10 Click the Edit icon of the second entry to configure wireless and security settings for SSID_VoIP. NBG6815 Users Guide 56 Chapter 8 Tutorials 11 Configure the screen as follows. You do not enable Intra-BSS Traffic for SSID_VoIP. Click Apply. 12 Click the Edit icon of the third entry to configure wireless and security settings for SSID_Guest. 13 Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Guest to allow wireless clients in the same wireless network to communicate with each other. Select Enable Guest WLAN to allow clients to access the Internet only. Click Apply. NBG6815 Users Guide 57 PART II Technical Reference 58 CHAPTER 9 Status 9.1 Overview This chapter discusses read-only information related to the device state of the NBG6815. 9.1.1 What You Can Do Use the Live Network Monitor screen to view transmission data rates between the NBG6815 and the Internet or connected devices (Section 9.2 on page 59). Use the Usage Monitor screen to view transmission data and bandwidth usage between the NBG6815 and applications or connected devices (Section 9.3 on page 61). Use the Common Usage screen to view the top five traffic flows transmitting from/to the selected LAN device(s) (Section 9.4 on page 62). Use the Download Traffic Statistics screen to view the type and percentage of most download traffic (Section 9.5 on page 63). Use the DHCP Table screen to view the current DHCP client information (Section 9.6 on page 64). Use the WLAN 2.4G/5G Clients screen to view the wireless clients that are currently associated to the NBG6815 (Section 9.7 on page 65). 9.2 Live Network Monitor Screen Use this screen to view the current upstream and downstream transmission speeds between the NBG6815 and the Internet and/or between the NBG6815 and the connected device(s) (represented by icons indicating the kind of network device), including those connecting wirelessly. Click Expert Mode > Status > Live Network Monitor. The following screen displays. You can move your mouse over a device icon to view information about the device, such as the name, IP address, MAC address, device type and connection type. NBG6815 Users Guide 59 Chapter 9 Status Figure 37 Expert Mode > Status > Live Network Monitor Click a device icon to go to a screen that displays the upstream/downstream bandwidth as a line graph. If you click the NBG6815s icon, it also shows the transmission rate between the NBG6815 and each connected device. If you click a connected devices icon, you can see the current transmission rate for a traffic type. The green ball indicates the traffic flow is given enough bandwidth. Figure 38 Expert Mode > Status > Live Network Monitor: Traffic Statistics (NBG6815) NBG6815 Users Guide 60 Chapter 9 Status Figure 39 Expert Mode > Status > Live Network Monitor: Traffic Statistics (Connected Device) 9.3 Usage Monitor Screen Use this screen to view the current upstream and downstream transmission data and bandwidth usage between the NBG6815 and the Internet and/or between the NBG6815 and the connected device(s), including those connecting wirelessly. Click Expert Mode > Status > Usage Monitor. The following screen displays. You can move your mouse over a data bar to view information about the transmission data usage, such as the upload and download usage. NBG6815 Users Guide 61 Chapter 9 Status Figure 40 Expert Mode > Status > Usage Monitor 9.4 Common Usage Screen Use this screen to view the top five traffic flows transmitting from/to the selected LAN device(s) in the past day, week or month. Click Expert Mode > Status > Common Usage to open the Common Usage screen. The y-axis shows the time period over which the traffic flow occurred. The x-axis shows the type of the traffic flow. NBG6815 Users Guide 62 Chapter 9 Status Figure 41 Expert Mode > Status > Common Usage 9.5 Download Traffic Statistics Screen Use this screen to view the type and percentage of most download traffic on the NBG6815. Click Expert Mode > Status > Download Traffic Statistics to open the Download Traffic Statistics screen. NBG6815 Users Guide 63 Chapter 9 Status Figure 42 Expert Mode > Status > Download Traffic Statistics 9.6 DHCP Table Screen You can configure the NBG6815s LAN as a DHCP server or disable it. When configured as a server, the NBG6815 assigns IP addresses to the clients. If DHCP service is disabled, you must have another DHCP server on that network, or else the computer must be manually configured. Use this screen to view current DHCP client information (including MAC Address, and IP Address) of all network clients using the NBG6815s DHCP server. Click Expert Mode > Status > DHCP Table to open the DHCP Table screen. Figure 43 Expert Mode > Status > DHCP Table NBG6815 Users Guide 64 Chapter 9 Status The following table describes the labels in this screen. Table 18 Expert Mode > Status > DHCP Table LABEL Interface
#
StatusOnline DESCRIPTION Select the interface from the drop-down list box to display current DHCP client information. This is the index number of the host computer. This field displays whether the connection to the host computer is up (a yellow bulb) or down (a gray bulb). This field displays the computer host name. This field displays the IP address relative to the # field listed above. This field shows the MAC address of the computer with the name in the Host Name field. Every Ethernet device has a unique MAC (Media Access Control) address which uniquely identifies a device. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. This field displays the devices interface type or received signal strength indicator (RSSI) that is currently connected to the NBG6815. This field displays the amount of time that the IP address is valid. Select this if you want to reserve the IP address for this specific MAC address. Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. Host Name IP Address MAC Address Interface/Rssi Lease time Reserve Apply Cancel 9.7 WLAN 2.4G/5G Clients Screen Use this screen to view the wireless stations (clients) that are currently associated to the NBG6815s 2.4GHz or 5GHz wireless network. Click Expert > Status > WLAN 2.4G Clients or WLAN 5G Clients to open the WLAN 2.4G/5G Clients screen. Figure 44 Expert > Status > WLAN 2.4G/5G Clients The following table describes the labels in this screen. Table 19 Expert > Status > WLAN 2.4G/5G Clients LABEL
#
MAC Address Association Time DESCRIPTION This is the index number of an associated wireless client. This field displays the MAC address of an associated wireless client. This field displays the time a wireless client first associated with the NBG6815s WLAN. NBG6815 Users Guide 65 Chapter 9 Status NBG6815 Users Guide 66 CHAPTER 10 WAN 10.1 Overview This chapter discusses the NBG6815s WAN screens. Use these screens to configure your NBG6815 for Internet access. A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It connects your private networks such as a LAN (Local Area Network) and other networks, so that a computer in one location can communicate with computers in other locations. Figure 45 LAN and WAN 10.2 What You Can Do Use the Internet Connection screen to enter your ISP information and set how the computer acquires its IP, DNS and WAN MAC addresses (Section 10.4 on page 70). Use the NAT screens to enable NAT, set a default server and change your NBG6815s port forwarding settings and trigger port settings (Section 10.5 on page 79). Use the Dynamic DNS screen to change your NBG6815s DDNS settings (Section 10.6 on page 82). 10.3 What You Need To Know The information in this section can help you configure the screens for your WAN connection, as well as enable/disable some advanced features of your NBG6815. NBG6815 Users Guide 67 Chapter 10 WAN 10.3.1 Configuring Your Internet Connection Encapsulation Method Encapsulation is used to include data from an upper layer protocol into a lower layer protocol. To set up a WAN connection to the Internet, you need to use the same encapsulation method used by your ISP (Internet Service Provider). If your ISP offers a dial-up Internet connection using PPPoE (PPP over Ethernet) or PPTP (Point-to-Point Tunneling Protocol), they should also provide a username and password (and service name) for user authentication. WAN IP Address The WAN IP address is an IP address for the NBG6815, which makes it accessible from an outside network. It is used by the NBG6815 to communicate with other devices in other networks. It can be static (fixed) or dynamically assigned by the ISP each time the NBG6815 tries to access the Internet. If your ISP assigns you a static WAN IP address, they should also assign you the subnet mask and DNS server IP address(es) (and a gateway IP address if you use the Ethernet or ENET ENCAP encapsulation method). DNS Server Address Assignment Use Domain Name System (DNS) to map a domain name to its corresponding IP address and vice versa, for instance, the IP address of www.zyxel.com is 204.217.0.2. The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. The NBG6815 can get the DNS server addresses in the following ways. 1 2 The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server fields. If your ISP dynamically assigns the DNS server IP addresses (along with the NBG6815s WAN IP address), set the DNS server fields to get the DNS server address from the ISP. WAN MAC Address The MAC address screen allows users to configure the WAN port's MAC address by either using the factory default or cloning the MAC address from a computer on your LAN. Choose Factory Default to select the factory assigned default MAC Address. Otherwise, click Clone the computer's MAC address - IP Address and enter the IP address of the computer on the LAN whose MAC you are cloning. Once it is successfully configured, the address will be copied to configuration file. It is recommended that you clone the MAC address prior to hooking up the WAN Port. NBG6815 Users Guide 68 Chapter 10 WAN Multicast Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient) or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to a group of hosts on the network - not everybody and not just 1. Figure 46 Multicast Example In the multicast example above, systems A and D comprise one multicast group. In multicasting, the server only needs to send one data stream and this is delivered to systems A and D. IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership in a multicast group - it is not used to carry user data. The NBG6815 supports both IGMP version 1
(IGMP-v1) and IGMP version 2 (IGMP-v2). At start up, the NBG6815 queries all directly connected networks to gather group membership. After that, the NBG6815 periodically updates this information. IP multicasting can be enabled/
disabled on the NBG6815 WAN interface in the Web Configurator (WAN). Select None to disable IP multicasting on these interfaces. Auto-IP Change When the NBG6815 gets a WAN IP address or a DNS server IP address which is in the same subnet as the LAN IP address 192.168.1.1, Auto-IP-Change allows the NBG6815 to change its LAN IP address to 10.0.0.1 automatically. If the NBG6815s original LAN IP address is 10.0.0.1 and the WAN IP address is in the same subnet, such as 10.0.0.3, the NBG6815 switches to use 192.168.1.1 as its LAN IP address. Figure 47 Auto-IP-Change Example 192.168.1.1 192.168.1.23 10.0.0.1 NBG6815 Users Guide 69 Chapter 10 WAN Auto-IP-Change only works under the following conditions:
The NBG6815 must be in Router Mode (see Section 15.12 on page 149 for more information) for Auto-IP-Change to become active. The NBG6815 is set to receive a dynamic WAN IP address. 10.4 Internet Connection Screen Use this screen to change your NBG6815s Internet access settings. Click Expert Mode > WAN >
Internet Connection. 10.4.1 IPoE Encapsulation This screen displays when you select IPoE encapsulation. NBG6815 Users Guide 70 Chapter 10 WAN Figure 48 Expert Mode > WAN > Internet Connection: IPoE Encapsulation (IPv4 Only) NBG6815 Users Guide 71 Chapter 10 WAN The following table describes the labels in this screen. Table 20 Network > WAN > Internet Connection: IPoE Encapsulation LABEL ISP Parameters for Internet Access Encapsulation IPv4 / IPv6 DESCRIPTION You must choose the IPoE option when the WAN port is used as a regular Ethernet. Select IPv4 Only if you want the NBG6815 to run IPv4 only. Select Dual Stack to allow the NBG6815 to run IPv4 and IPv6 at the same time. Select IPv6 Only if you want the NBG6815 to run IPv6 only. Select this option If your ISP did not assign you a fixed IP address. This is the default selection. IP Address Obtain an IP Address Automatically
(DHCP) Static IP Address Select this option If the ISP assigned a fixed IP address. Enter your WAN IP address in this field if you selected Static IP Address. Enter the Subnet Mask in this field. IP Address Subnet Mask Default Gateway Enter a gateway IP address (if your ISP gave you one) in this field. MTU Size Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet arrives, the NBG6815 divides it into smaller fragments. DNS Server First DNS Server Second DNS Server Third DNS Server WAN MAC Address Select Obtained From ISP if your ISP dynamically assigns DNS server information
(and the NBG6815's WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Once the WAN MAC address is successfully configured, the address will be copied to the configuration file. It will not change unless you change the setting or upload a different configuration file. Factory default Select this option to have the WAN interface use the factory assigned default MAC address. By default, the NBG6815 uses the factory assigned MAC address to identify itself. Select this option to have the WAN interface use a different MAC address by cloning the MAC address of another device or computer. Enter the IP address of the device or computer whose MAC you are cloning. Select this option to have the WAN interface use a manually specified MAC address. Enter the MAC address in the fields. Clone the computer's MAC address - IP Address Set WAN MAC Address IPv6 Tunneling Use IPv6 tunneling when the local network uses IPv6 and the ISP has an IPv4 network. When the NBG6815 has an IPv4 WAN address and you set IPv4/IPv6 mode to IPv4 Only, you can enable IPv6 tunneling to encapsulate IPv6 packets in IPv4 packets to cross the ISPs IPv4 network. NBG6815 Users Guide 72 Chapter 10 WAN Table 20 Network > WAN > Internet Connection: IPoE Encapsulation (continued) LABEL IPv6 Tunneling DESCRIPTION Select None to not allow IPv6 packets to cross IPv4 networks. Select 6RD to enable 6RD. IPv6 Rapid Deployment (6RD) is an IPv6 transitioning process for stateless tunneling of IPv6 over IPv4. Enable 6RD to allow tunneling across an ISP's IPv4 only access network. Select 6to4 to transmit IPv6 packets over an IPv4 network. A 6to4 relay router is required to route 6to4 packets to a native IPv6 network. Select 6in4 if the NBG6815 has a public IPv4 address and you want to transmit your IPv6 packets to one and only one remote site whose LAN network is also an IPv6 network. You must know the WAN IP address of the remote gateway. 6RD The NBG6815 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the ISPs Border Relay router to connect to the native IPv6 Internet. The local network can also use IPv4 services. The NBG6815 uses its configured IPv4 WAN IP to route IPv4 traffic to the IPv4 Internet. Select this to have the NBG6815 detect the relay servers IP address automatically through DHCP. This is available only when you select IPv4 Only in the IPv4/IPv6 field. Automatically configured by DHCPC Manually Configured Select this if you have the IPv4 address of the relay server. Border Relay IPv4 Address Service Provider IPv6 Prefix Service Provider IPv6 Prefix length Specify the relay servers IPv4 address. Enter an IPv6 prefix for tunneling IPv6 traffic to the ISPs Border Relay router and connecting to the native IPv6 Internet. Enter the IPv6 prefix length. An IPv6 prefix length specifies how many most significant bits (starting from the left) in the address compose the network address. Enter the subnet mask number (1~32) for the IPv4 network. IPv4 mask length 6to4 The NBG6815 should get a public IPv4 address for the WAN. The NBG6815 adds an IPv4 IP header to an IPv6 packet when transmitting the packet to the Internet. In reverse, the NBG6815 removes the IPv4 header from an IPv6 packet when receiving it from the Internet. This is available only when you select IPv4 Only in the IPv4/IPv6 field. Relay Server IPv4 Address 6in4 Enter the IPv4 address of a 6to4 relay server which helps forward packets between 6to4 networks and native IPv6 networks. The NBG6815 encapsulates IPv6 packets within IPv4 packets across the Internet. You must know the WAN IP address of the remote gateway device. This mode is normally used for a site-to-site application such as two branch offices. Enter the IPv4 address of the remote gateway to which this interface tunnels traffic. This is available only when you select IPv4 Only in the IPv4/IPv6 field. Remote IPv4 Address Remote IPv6 Address Local IPv6 Address IPv6 Prefix Enter the IPv6 address assigned by your ISP. Enter the IPv6 prefix for this interface if you want to use a static IP address. Enter the IPv6 address of the remote gateway to which this interface tunnels traffic. NBG6815 Users Guide 73 Chapter 10 WAN Table 20 Network > WAN > Internet Connection: IPoE Encapsulation (continued) LABEL IPv6 DNS Server DESCRIPTION This is available only when you select IPv4 Only in the IPv4/IPv6 field and set IPv6 Tunneling to 6RD, 6in4 or 6to4. First DNS Server Specify the DNS server IPv6 address assigned by the ISP. Second DNS Server Third DNS Server IPv6 Address This section is NOT available when you select IPv4 Only in the IPv4/IPv6 field. Obtain an IP Address Automatically(DHCP
) Select DUID-LL (Default) to have the NBG6815 use DUID-LL (DUID Based on Link-layer Address) for identification when exchanging DHCPv6 messages. Select this option if you want to obtain an IPv6 address from a DHCPv6 server. Select DUID-LLT to have the NBG6815 use DUID-LLT (DUID Based on Link-layer Address Plus Time) for identification when exchanging DHCPv6 messages. Static IP Address IPv6 Address Prefix length IPv6 Default Gateway Link Local Only IPv6 DNS Server Select this option if you have a fixed IPv6 address assigned by your ISP. Enter the IPv6 address assigned by your ISP. Enter the address prefix length to specify how many most significant bits in an IPv6 address compose the network address. Enter the IPv6 address of the next-hop gateway. The gateway helps forward packets to their destinations. Select this option to use the link-local address which uniquely identifies a device on the local network (the LAN). This is available only when you select Dual Stack or IPv6 Only in the IPv4/IPv6 field. First DNS Server Select Obtained From ISP to have the NBG6815 get the IPv6 DNS server addresses from the ISP automatically. Second DNS Server Third DNS Server Multicast Setup Multicast Setup Select User-Defined and enter the IPv6 DNS server address assigned by the ISP to have the NBG6815 use the IPv6 DNS server addresses you configure manually. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IPv6 address of a computer in order to access it. Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the WAN to the LAN. Select None to disable this feature. This may cause incoming traffic to be dropped or sent to all connected network devices. Auto-Subnet Configuration Enable Auto-IP-
Change Mode Select this option to have the NBG6815 change its LAN IP address to 10.0.0.1 or 192.168.1.1 accordingly when the NBG6815 gets a dynamic WAN IP address in the same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1. Select this option to have the NBG6815 change its LAN IP address to 10.0.0.1 or 192.168.1.1 accordingly when the NBG6815 gets a DNS server IP address in the same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1. The NAT, DHCP server and firewall functions on the NBG6815 are still available in this mode. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. Apply Cancel NBG6815 Users Guide 74 Chapter 10 WAN 10.4.2 PPPoE Encapsulation The NBG6815 supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF standard
(RFC 2516) specifying how a personal computer (PC) interacts with a broadband modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-up connection using PPPoE. For the service provider, PPPoE offers an access and authentication method that works with existing access control systems (for example Radius). One of the benefits of PPPoE is the ability to let you access one of multiple network services, a function known as dynamic service selection. This enables the service provider to easily create and offer new IP services for individuals. Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as it requires no specific configuration of the broadband modem at the customer site. By implementing PPPoE directly on the NBG6815 (rather than individual computers), the computers on the LAN do not need PPPoE software installed, since the NBG6815 does that part of the task. Furthermore, with NAT, all of the LANs computers will have access. NBG6815 Users Guide 75 Chapter 10 WAN This screen displays when you select PPPoE encapsulation. Figure 49 Network > WAN > Internet Connection: PPPoE Encapsulation (IPv4 Only) NBG6815 Users Guide 76 Chapter 10 WAN The following table describes the labels in this screen. Table 21 Network > WAN > Internet Connection: PPPoE Encapsulation LABEL DESCRIPTION ISP Parameters for Internet Access Encapsulation IPv4 / IPv6 Select PPPoE if you connect to your Internet via dial-up. Select IPv4 Only if you want the NBG6815 to run IPv4 only. Select Dual Stack to allow the NBG6815 to run IPv4 and IPv6 at the same time. Select IPv6 Only if you want the NBG6815 to run IPv6 only. PPP Information PPP Username PPP Password MTU Size PPP Auto Connect IDLE Timeout
(second) PPPoE Service Name WAN IP Address Assignment Get automatically from ISP Use Fixed IP Address DNS Server First DNS Server Second DNS Server Third DNS Server WAN MAC Address Type the user name given to you by your ISP. Type the password associated with the user name above. Enter the Maximum Transmission Unit (MTU) or the largest packet size per frame that your NBG6815 can receive and process. Select this option if you do not want the connection to time out. This value specifies the time in minutes that elapses before the router automatically disconnects from the PPPoE server. Enter the PPPoE service name specified in the ISP account. Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Select this option and enter your WAN IP address if the ISP assigned a fixed IP address. Select Obtained From ISP if your ISP dynamically assigns DNS server information (and the NBG6815's WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Select Factory default to use the factory assigned default MAC Address. Select Clone the computer's MAC address - IP Address and enter the IP address of the computer on the LAN whose MAC you are cloning. The MAC address section allows users to configure the WAN port's MAC address by using the NBG6815s MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address. Factory default Clone the computers MAC address - IP Address Set WAN MAC Address IPv6 Tunneling Select this option and enter the MAC address you want to use. Use IPv6 tunneling when the local network uses IPv6 and the ISP has an IPv4 network. When the NBG6815 has an IPv4 WAN address and you set IPv4/IPv6 mode to IPv4 Only, you can enable IPv6 tunneling to encapsulate IPv6 packets in IPv4 packets to cross the ISPs IPv4 network. NBG6815 Users Guide 77 Chapter 10 WAN Table 21 Network > WAN > Internet Connection: PPPoE Encapsulation (continued) LABEL IPv6 Tunneling DESCRIPTION Select None to not allow IPv6 packets to cross IPv4 networks. Select 6RD to enable 6RD. IPv6 Rapid Deployment (6RD) is an IPv6 transitioning process for stateless tunneling of IPv6 over IPv4. Enable 6RD to allow tunneling across an ISP's IPv4 only access network. Select 6to4 to transmit IPv6 packets over an IPv4 network. A 6to4 relay router is required to route 6to4 packets to a native IPv6 network. Select 6in4 if the NBG6815 has a public IPv4 address and you want to transmit your IPv6 packets to one and only one remote site whose LAN network is also an IPv6 network. You must know the WAN IP address of the remote gateway. 6RD The NBG6815 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the ISPs Border Relay router to connect to the native IPv6 Internet. The local network can also use IPv4 services. The NBG6815 uses its configured IPv4 WAN IP to route IPv4 traffic to the IPv4 Internet. Select this to have the NBG6815 detect the relay servers IP address automatically through DHCP. Select this if you have the IPv4 address of the relay server. This is available only when you select IPv4 Only in the IPv4/IPv6 field. Automatically configured by DHCPC Manually Configured Border Relay IPv4 Address Service Provider IPv6 Prefix Service Provider IPv6 Prefix length Specify the relay servers IPv4 address. Enter an IPv6 prefix for tunneling IPv6 traffic to the ISPs Border Relay router and connecting to the native IPv6 Internet. Enter the IPv6 prefix length. An IPv6 prefix length specifies how many most significant bits (starting from the left) in the address compose the network address. Enter the subnet mask number (1~32) for the IPv4 network. IPv4 mask length 6to4 The NBG6815 should get a public IPv4 address for the WAN. The NBG6815 adds an IPv4 IP header to an IPv6 packet when transmitting the packet to the Internet. In reverse, the NBG6815 removes the IPv4 header from an IPv6 packet when receiving it from the Internet. This is available only when you select IPv4 Only in the IPv4/IPv6 field. Relay Server IPv4 Address 6in4 Enter the IPv4 address of a 6to4 relay server which helps forward packets between 6to4 networks and native IPv6 networks. The NBG6815 encapsulates IPv6 packets within IPv4 packets across the Internet. You must know the WAN IP address of the remote gateway device. This mode is normally used for a site-to-site application such as two branch offices. This is available only when you select IPv4 Only in the IPv4/IPv6 field. Remote IPv4 Address Remote IPv6 Address Local IPv6 Address Enter the IPv6 address assigned by your ISP. IPv6 Prefix Enter the IPv4 address of the remote gateway to which this interface tunnels traffic. Enter the IPv6 address of the remote gateway to which this interface tunnels traffic. Enter the IPv6 prefix for this interface if you want to use a static IP address. NBG6815 Users Guide 78 Chapter 10 WAN Table 21 Network > WAN > Internet Connection: PPPoE Encapsulation (continued) LABEL IPv6 DNS Server DESCRIPTION This is available only when you select IPv4 Only in the IPv4/IPv6 field and set IPv6 Tunneling to 6RD, 6in4 or 6to4. First DNS Server Specify the DNS server IPv6 address assigned by the ISP. Second DNS Server Third DNS Server IPv6 DNS Server This is available only when you select Dual Stack or IPv6 Only in the IPv4/IPv6 field. First DNS Server Select Obtained From ISP to have the NBG6815 get the IPv6 DNS server addresses from the ISP automatically. Second DNS Server Third DNS Server Multicast Setup Multicast Setup Select User-Defined and enter the IPv6 DNS server address assigned by the ISP to have the NBG6815 use the IPv6 DNS server addresses you configure manually. Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IPv6 address of a computer in order to access it. Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the WAN to the LAN. Select None to disable this feature. This may cause incoming traffic to be dropped or sent to all connected network devices. Auto-Subnet Configuration Enable Auto-IP-
Change Mode Select this option to have the NBG6815 change its LAN IP address to 10.0.0.1 or 192.168.1.1 accordingly when the NBG6815 gets a dynamic WAN IP address in the same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1. Apply Cancel The NAT, DHCP server and firewall functions on the NBG6815 are still available in this mode. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. 10.5 NAT Use this screen to change your NBG6815s NAT (Network Address Translation) settings. Click Expert Mode > WAN > NAT. 10.5.1 General Screen Use this screen to enable NAT, set a default server and configure your NBG6815s port forwarding settings to forward incoming service requests to the server(s) on your local network. Click Expert Mode > WAN > NAT > General. NBG6815 Users Guide 79 Chapter 10 WAN Figure 50 Expert Mode > WAN > NAT > General The following table describes the labels in this screen. Table 22 Expert Mode > WAN > NAT > General LABEL General Network Address Translation (NAT) DESCRIPTION Network Address Translation (NAT) allows the translation of an Internet protocol address used within one network (for example a private IP address used in a local network) to a different IP address known within another network (for example a public IP address used on the Internet). Select Enable to activate NAT. Select Disable to turn it off. Default Server Setup Default Server Change To Server You can decide whether you want to use the default server or specify a server manually. In addition to the servers for specified services, NAT supports a default server. A default server receives packets from ports that are not specified in the port forwarding summary table below. Select this to use the default server. Select this and manually enter the servers IP address. NBG6815 Users Guide 80 Chapter 10 WAN DESCRIPTION Table 22 Expert Mode > WAN > NAT > General (continued) LABEL Port ForwardingPort Forwarding (Max Limit : 32)
#
Service Name This is the number of an individual port forwarding server entry. Select a pre-defined service from the drop-down list box. The pre-defined service port number(s) and protocol will be displayed in the port forwarding summary table. Otherwise, select User define to manually enter the Port number(s) and select the Service Protocol. Select the transport layer protocol supported by this virtual server. Choices are TCP, UDP, or TCP_UDP. If you have chosen a pre-defined service in the Service Name field, the protocol will be configured automatically. This shows the port number(s) that identifies the service if you select a pre-defined service. If you select User define in the Name field, enter the port number(s) manually. Select User define to manually Eenter the inside IP address of the virtual server here. This shows the port number(s) that identifies the service if you select a pre-defined service. If you select User define in the Service Name field, enter the port number(s) manually. This field displays a name to identify this rule. This is the transport layer protocol used for the service. This field displays the port number(s). This field displays the inside IP address of the server. This field displays the port number(s). Click Click the Edit icon to open the edit screen where you can modify an existing rule. Add to add the rule in the port forwarding summary table below. the Delete icon to remove a rule. Click Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. Service Protocol Local Port Server IP Address Port Name Protocol PortLocal Port Server IP Address Port Add ModifyDelete Apply Cancel 10.5.2 Port Trigger Screen To change your NBG6815s trigger port settings, click Expert Mode > WAN > NAT > Port Trigger. The screen appears as shown. Note: Only one LAN computer can use a trigger port (range) at a time. Figure 51 Expert Mode > WAN > NAT > Port Trigger NBG6815 Users Guide 81 Chapter 10 WAN The following table describes the labels in this screen. DESCRIPTION Table 23 Expert Mode > WAN > NAT > Port Trigger LABEL Port Trigger Rules (Max Limit : 32)
#
Name This is the rule index number (read-only). Type a unique name (up to 15 characters) for identification purposes. All characters are permitted - including spaces. Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a particular service. The NBG6815 forwards the traffic with this port (or range of ports) to the client computer on the LAN that requested the service. Type a port number or the starting port number in a range of port numbers. Type a port number or the ending port number in a range of port numbers. The trigger port is a port (or a range of ports) that causes (or triggers) the NBG6815 to record the IP address of the LAN computer that sent the traffic to a server on the WAN. Type a port number or the starting port number in a range of port numbers. Type a port number or the ending port number in a range of port numbers. Click Click Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. to add the rule in the port trigger summary table. to remove a rule. Incoming Port End Port Trigger Port End Port Add Delete Apply Cancel 10.6 Dynamic DNS Screen To change your NBG6815s DDNS, click Expert Mode > WAN > Dynamic DNS. The screen appears as shown. Figure 52 Expert Mode > WAN > Dynamic DNS NBG6815 Users Guide 82 Chapter 10 WAN The following table describes the labels in this screen. DESCRIPTION Table 24 Expert Mode > WAN > Dynamic DNS LABEL Dynamic DNS Setup Dynamic DNS Service Provider Host Name Select Enable to use dynamic DNS. Select Disable to turn this feature off. Select the name of your Dynamic DNS service provider. Enter a host names in the field provided. You can specify up to two host names in the field separated by a comma (","). Enter your user name. Enter the password assigned to you. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. Username Password Apply Cancel NBG6815 Users Guide 83 CHAPTER 11 Wireless LAN 11.1 Overview This chapter discusses how to configure the wireless network settings in your NBG6815. The NBG6815 is able to function both 2.4GHz and 5GHz network at the same time. You can have different wireless and wireless security settings for 2.4GHz and 5GHz wireless LANs. Click Expert Mode > Wireless to configure wireless LAN 2.4G or wireless LAN 5G. See the appendices for more detailed information about wireless networks. The following figure provides an example of a wireless network. Figure 53 Example of a Wireless Network The wireless network is the part in the blue circle. In this wireless network, devices A and B are called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your NBG6815 is the AP. NBG6815 Users Guide 84 Chapter 11 Wireless LAN 11.1.1 What You Can Do Use the Wireless screen to enable or disable the 2.4GHz or 5GHz wireless LAN, set up wireless security between the NBG6815 and the wireless clients, and make other basic configuration changes (Section 11.2 on page 89). Use the Guest Wireless screen to set up multiple wireless networks on your NBG6815 (Section 11.4 on page 94). Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from connecting to the NBG6815 (Section 11.5 on page 97). Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold (Section 11.6 on page 98). Use the WPS screen to quickly set up a wireless network with strong security, without having to configure security settings manually (Section 11.7 on page 99). Use the Scheduling screen to set the times your wireless LAN is turned on and off (Section 11.8 on page 101). 11.1.2 What You Should Know Every wireless network must follow these basic guidelines. Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. If two wireless networks overlap, they should use different channels. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. Every wireless client in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network. SSID Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change the default SSID to something that is difficult to guess. This type of security is fairly weak, however, because there are ways for unauthorized devices to get the SSID. In addition, unauthorized devices can still see the information that is sent in the wireless network. MAC Address Filter Every wireless client has a unique identification number, called a MAC address.1 A MAC address is usually written using twelve hexadecimal characters2; for example, 00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each wireless client, see the appropriate Users Guide or other documentation. NBG6815 Users Guide 85 Chapter 11 Wireless LAN You can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to use the wireless network. If a wireless client is allowed to use the wireless network, it still has to have the correct settings (SSID, channel, and security). If a wireless client is not allowed to use the wireless network, it does not matter if it has the correct settings. This type of security does not protect the information that is sent in the wireless network. Furthermore, there are ways for unauthorized devices to get the MAC address of an authorized wireless client. Then, they can use that MAC address to use the wireless network. User Authentication You can make every user log in to the wireless network before they can use it. This is called user authentication. However, every wireless client in the wireless network has to support IEEE 802.1x to do this. For wireless networks, there are two typical places to store the user names and passwords for each user. In the AP: this feature is called a local user database or a local database. In a RADIUS server: this is a server used in businesses more than in homes. If your AP does not provide a local user database and if you do not have a RADIUS server, you cannot set up user names and passwords for your users. Unauthorized devices can still see the information that is sent in the wireless network, even if they cannot use the wireless network. Furthermore, there are ways for unauthorized wireless users to get a valid user name and password. Then, they can use that user name and password to use the wireless network. Local user databases also have an additional limitation that is explained in the next section. Encryption Wireless networks can use encryption to protect the information that is sent in the wireless network. Encryption is like a secret code. If you do not know the secret code, you cannot understand the message. The types of encryption you can choose depend on the type of user authentication. (See page 86 for information about this.) Table 25 Types of Encryption for Each Type of Authentication Weakest NO AUTHENTICATION No Security WPA-PSK RADIUS SERVER WPA Strongest WPA2-PSK WPA2 1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds of wireless devices might not have MAC addresses. 2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. NBG6815 Users Guide 86 Chapter 11 Wireless LAN For example, if the wireless network has a RADIUS server, you can choose WPA or WPA2. If users do not log in to the wireless network, you can choose no encryption, WPA-PSK, or WPA2-PSK. Usually, you should set up the strongest encryption that every wireless client in the wireless network supports. For example, suppose the AP does not have a local user database, and you do not have a RADIUS server. Therefore, there is no user authentication. Suppose the wireless network has two wireless clients. Device A only supports WPA, and device B supports WPA and WPA2. Therefore, you should set up WPA or WPA-PSK in the wireless network. Note: It is recommended that wireless networks use WPA-PSK, WPA, or stronger encryption. IEEE 802.1x and WEP encryption are better than none at all, but it is still possible for unauthorized devices to figure out the original information pretty quickly. Note: It is not possible to use WPA-PSK, WPA or stronger encryption with a local user database. In this case, it is better to set up stronger encryption with no authentication than to set up weaker encryption with the local user database. When you select WPA2 or WPA2-PSK in your NBG6815, you can also select an option (WPA/
WPA-PSK Compatible) to support WPA/WPA-PSK as well. In this case, if some wireless clients support WPA and some support WPA2, you should set up WPA2-PSK or WPA2 (depending on the type of wireless network login) and select the WPA/WPA-PSK Compatible option in the NBG6815. Many types of encryption use a key to protect the information in the wireless network. The longer the key, the stronger the encryption. Every wireless client in the wireless network must have the same key. Guest WLAN Guest WLAN allows you to set up a wireless network where users can access to Internet via the NBG6815 (Z), but not other networks connected to the Z. In the following figure, a guest user can access the Internet from the guest wireless network A via Z but not the home or company network N. Note: The home or company network N and Guest WLAN network are independent networks. Note: Only Router mode supports guest WLAN. NBG6815 Users Guide 87 Chapter 11 Wireless LAN Figure 54 Guest Wireless LAN Network A Z N Guest WLAN Bandwidth The Guest WLAN Bandwidth function allows you to restrict the maximum bandwidth for the guest wireless network. Additionally, you can also define bandwidth for your home or office network. An example is shown next to define maximum bandwidth for your networks (A is Guest WLAN and N is home or company network.) Figure 55 Example: Bandwidth for Different Networks N 600 kbps 100 kbps 300 kbps A WPS WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Depending on the devices in your network, you can either press a button (on the device itself, or in its configuration utility) or enter a PIN (Personal Identification NBG6815 Users Guide 88 Chapter 11 Wireless LAN Number) in the devices. Then, they connect and set up a secure network by themselves. See how to set up a secure wireless network using WPS in the Section 8.2 on page 48. 11.2 Wireless Screen Use this screen to configure the SSID and wireless security of the NBG6815s default wireless LAN. Note: If you are configuring the NBG6815 from a computer connected to the wireless LAN and you change the NBG6815s SSID, channel or security settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the NBG6815s new settings. Click Expert Mode > Wireless. Figure 56 Expert Mode > Wireless The following table describes the general wireless LAN labels in this screen. Table 26 Expert Mode > Wireless LABEL Wireless Setup Band DESCRIPTION Wireless LAN Select the frequency band to set whether you want to apply the wireless and security settings to the default 2.4GHz or 5GHz wireless LAN. Select Enable to activate the 2.4GHz and/or 5GHz wireless LAN. Select Disable to turn it off. You can enable or disable both 2.4GHz and 5GHz wireless LANs by using the WIFI button located on the back panel of the NBG6815. NBG6815 Users Guide 89 Chapter 11 Wireless LAN Table 26 Expert Mode > Wireless (continued) LABEL Name (SSID) DESCRIPTION The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Hide SSID Channel Selection Select a channel from the drop-down list box. The options vary depending on the frequency band and the country you are in. This option is only available if Auto Channel Selection is disabled. This displays the channel the NBG6815 is currently using. Select the wireless channel width used by NBG6815. A standard 20MHz channel offers transfer speeds of up to 144Mbps (2.4GHz) or 217Mbps
(5GHZ) whereas a 40MHz channel uses two standard channels and offers speeds of up to 300Mbps (2.4GHz) or 450Mbps (5GHZ). Because not all devices support 40 MHz channels, select Auto 20/40MHz to allow the NBG6815 to adjust the channel bandwidth automatically. 40MHz (channel bonding or dual channel) bonds two adjacent radio channels to increase throughput. The wireless clients must also support 40 MHz. It is often better to use the 20 MHz setting in a location where the environment hinders the wireless signal. Select 20MHz if you want to lessen radio interference with other wireless devices in your neighborhood or the wireless clients do not support channel bonding. If you set Band to 2.4GHz, you can select from the following:
802.11b: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate with the NBG6815. In this mode, all wireless devices can only transmit at the data rates supported by IEEE 802.11b. 802.11g: allows IEEE 802.11g compliant WLAN devices to associate with the Device. IEEE 802.11b compliant WLAN devices can associate with the NBG6815 only when they use the short preamble type. 802.11bg: allows either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate with the NBG6815. The NBG6815 adjusts the transmission rate automatically according to the wireless standard supported by the wireless devices. 802.11n: allows IEEE 802.11n compliant WLAN devices to associate with the NBG6815. This can increase transmission rates, although IEEE 802.11b or IEEE 802.11g clients will not be able to connect to the NBG6815. 802.11gn: allows either IEEE 802.11g or IEEE 802.11n compliant WLAN devices to associate with the NBG6815. The transmission rate of your NBG6815 might be reduced. 802.11 bgn: allows IEEE802.11b, IEEE802.11g and IEEE802.11n compliant WLAN devices to associate with the NBG6815. The transmission rate of your NBG6815 might be reduced. If you set Band to 5GHz, you can select from the following:
802.11a: allows only IEEE 802.11a compliant WLAN devices to associate with the NBG6815. 802.11a/an: allows both IEEE802.11n and IEEE802.11a compliant WLAN devices to associate with the NBG6815. The transmission rate of your NBG6815 might be reduced. 802.11a/an/ac: allows IEEE802.11n, IEEE802.11a and IEEE 802.11c compliant WLAN devices to associate with the NBG6815. Operating Channel Channel Width 802.11 Mode Security NBG6815 Users Guide 90 Chapter 11 Wireless LAN Table 26 Expert Mode > Wireless (continued) LABEL Security Mode DESCRIPTION Select WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 11.3 on page 91 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Apply Cancel Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. See the rest of this chapter for information on the other labels in this screen. 11.3 Wireless Security The screen varies depending on what you select in the Security Mode field. 11.3.1 No Security Select No Security to allow wireless clients to communicate with the access points without any data encryption. Note: If you do not enable any wireless security on your NBG6815, your network is accessible to any wireless networking device that is within range. Figure 57 Expert Mode > Wireless > Security Mode: No Security NBG6815 Users Guide 91 Chapter 11 Wireless LAN The following table describes the labels in this screen. Table 27 Expert Mode > Wireless > Security Mode: No Security LABEL Security Mode Apply Cancel DESCRIPTION Choose No Security from the drop-down list box. Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. 11.3.2 WPA-PSK/WPA2-PSK Select WPA-PSK or WPA2-PSK from the Security Mode list. Note: WPA-PSK is not available if you enable WPS before you configure WPA-PSK in the Expert Mode > Wireless > Wireless screen. Figure 58 Expert Mode > Wireless > Security Mode: WPA-PSK/WPA2-PSK The following table describes the labels in this screen. Table 28 Expert Mode > Wireless > Security Mode: WPA-PSK/WPA2-PSK LABEL Security Mode WPA-PSK Compatible DESCRIPTION Select WPA-PSK or WPA2-PSK to enable data encryption. This field appears when you choose WPA2-PSK as the Security Mode. Pre-Shared Key Check this field to allow wireless devices using WPA-PSK security mode to connect to your NBG6815. WPA-PSK/WPA2-PSK uses a simple common password for authentication. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. NBG6815 Users Guide 92 Chapter 11 Wireless LAN Table 28 Expert Mode > Wireless > Security Mode: WPA-PSK/WPA2-PSK (continued) LABEL Group Key Update Timer DESCRIPTION The Group Key Update Timer is the rate at which the AP sends a new group key out to all clients. Apply Cancel The default is 3600 seconds (60 minutes). Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. 11.3.3 WPA/WPA2 Select WPA or WPA2 from the Security Mode list. Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2 in the Expert Mode > Wireless > Wireless screen. Figure 59 Expert Mode > Wireless > Security Mode: WPA/WPA2 NBG6815 Users Guide 93 Chapter 11 Wireless LAN The following table describes the labels in this screen. Table 29 Expert Mode > Wireless > Security Mode: WPA/WPA2 LABEL Security Mode WPA Compatible DESCRIPTION Select WPA or WPA2 to enable data encryption. This check box is available only when you select WPA2-PSK or WPA2 in the Security Mode field. Group Key Update Timer PMK Cache Period Select the check box to have both WPA2 and WPA wireless clients be able to communicate with the NBG6815 even when the NBG6815 is using WPA2-PSK or WPA2. The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA/WPA2 key management) sends a new group key out to all clients. The re-keying process is the WPA/WPA2 equivalent of automatically changing the WEP key for an AP and all stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is also supported in WPA-PSK/WPA2-PSK mode. This field is available only when you select WPA2. Specify how often wireless clients have to resend usernames and passwords in order to stay connected. Enter a time interval between 10 and 999999 minutes. Note: If wireless client authentication is done using a RADIUS server, the reauthentication timer on the RADIUS server has priority. Pre-Authentication This field is available only when you select WPA2. Authentication Server IP Address Port Number Shared Secret Session Timeout Pre-authentication enables fast roaming by allowing the wireless client (already connecting to an AP) to perform IEEE 802.1x authentication with another AP before connecting to it. Select Enable to turn on preauthentication in WAP2. Otherwise, select Disable. Enter the IP address of the external authentication server in dotted decimal notation. Enter the port number of the external authentication server. You need not change this value unless your network administrator instructs you to do so with additional information. Enter a password (up to 127 alphanumeric characters) as the key to be shared between the external authentication server and the NBG6815. The key must be the same on the external authentication server and your NBG6815. The key is not sent over the network. The NBG6815 automatically disconnects a wireless client from the wireless and wired networks after a period of inactivity. The wireless client needs to send the username and password again before it can use the wireless and wired networks again. Some wireless clients may prompt users for a username and password; other clients may use saved login credentials. In either case, there is usually a short delay while the wireless client logs in to the wireless network again. Apply Cancel Enter the time in seconds from 0 to 999999. Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. 11.4 Guest Wireless Screen This screen allows you to enable and configure multiple guest wireless network settings on the NBG6815. NBG6815 Users Guide 94 Chapter 11 Wireless LAN You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the NBG6815. This allows you to use one access point to provide several BSSs simultaneously. You can then assign varying security types to different SSIDs. Wireless clients can use different SSIDs to associate with the same access point. Click Expert Mode > Wireless > Guest Wireless. The following screen displays. Figure 60 Expert Mode > Wireless > Guest Wireless The following table describes the labels in this screen. Table 30 Expert Mode > Wireless > Guest Wireless LABEL Band
#
Status SSID DESCRIPTION Use 2.4GHz or 5GHz to set up the NBG6815s guest Wi-Fi network. This is the index number of each SSID profile. This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb). An SSID profile is the set of parameters relating to one of the NBG6815s BSSs. The SSID
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated. This field displays the name of the wireless profile on the network. When a wireless client scans for an AP to associate with, this is the name that is broadcast and seen in the wireless client utility. This field indicates the security mode of the SSID profile. Click the Edit icon to configure the SSID profile. Security Edit 11.4.1 Guest Wireless Edit Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the Guest Wireless screen. The following screen displays. NBG6815 Users Guide 95 Chapter 11 Wireless LAN Figure 61 Expert Mode > Wireless > Guest Wireless > Guest Wireless Setup: Edit The following table describes the labels in this screen. Table 31 Expert Mode > Wireless > Guest Wireless > Guest Wireless Setup: Edit LABEL Active Name (SSID) DESCRIPTION Select this to activate the SSID profile. The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). Hide SSID Intra-BSS Traffic Blocking WMM QoS Enable Bandwidth Management for Guest WLAN Maximum Bandwidth Security Mode Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless clients can access the wired network and communicate with each other. When Intra-BSS is disabled, wireless clients can still access the wired network but cannot communicate with each other. Check this to have the NBG6815 automatically give a service a priority level according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which makes them run more smoothly. Select this to turn on bandwidth management for the Guest Wi-Fi network. Enter a number to specify maximum bandwidth the Guest Wi-Fi network can use. Select WPA-PSK or WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 11.3 on page 91 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Apply Cancel Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. NBG6815 Users Guide 96 Chapter 11 Wireless LAN 11.5 MAC Filter Screen The MAC filter screen allows you to configure the NBG6815 to give exclusive access to devices
(Allow) or exclude devices from accessing the NBG6815 (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this screen. To change your NBG6815s MAC filter settings, click Expert Mode > Wireless > MAC Filter. The screen appears as shown. Figure 62 Expert Mode > Wireless > MAC Filter The following table describes the labels in this menu. Table 32 Expert Mode > Wireless > MAC Filter LABEL Band DESCRIPTION Select the frequency band to set whether you want to apply the wireless and security settings to the default 2.4GHz or 5GHz wireless LAN. This shows the SSID for which you are configuring MAC filtering. Select to turn on (Enable) or off (Disable) MAC address filtering. SSID Select MAC Address Filter Filter Action Define the filter action for the list of MAC addresses in the MAC Filter Summary table. Select Allow to permit access to the NBG6815, MAC addresses not listed will be denied access to the NBG6815. Select Deny to block access to the NBG6815, MAC addresses not listed will be allowed to access the NBG6815. MAC Filter Summary (Max Limit : 64) Set#
This is the index number of the MAC address. Select Auto Detection to automatically detect the MAC address of the wireless station that are allowed or denied access to the NBG6815. Otherwise, select User define to enter the MAC address of the wireless station in the MAC Address field that are allowed or denied access to the NBG6815. Enter the MAC address of the wireless station that are allowed or denied access to the NBG6815.This field displays the MAC address of the wireless station. If you select User define in the # field, enter the MAC address(es) manually. Click to add the rule in the MAC filter summary table. MAC Address Add/Delete Click to remove a rule. NBG6815 Users Guide 97 Chapter 11 Wireless LAN Table 32 Expert Mode > Wireless > MAC Filter LABEL Apply Cancel DESCRIPTION Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. 11.6 Advanced Screen Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold settings. Click Expert Mode > Wireless > Advanced. The screen appears as shown. Figure 63 Expert Mode > Wireless > Advanced The following table describes the labels in this screen. Table 33 Expert Mode > Wireless > Advanced LABEL Wireless Advanced Setup Band DESCRIPTION RTS/CTS Threshold Fragmentation Threshold Select the frequency band to set whether you want to apply the wireless and security settings to the default 2.4GHz or 5GHz wireless LAN. Data with its frame size larger than this value will perform the RTS (Request To Send)/
CTS (Clear To Send) handshake. This field is not configurable and the NBG6815 automatically changes to use the maximum value if you select 802.11n, 802.11an, 802.11gn or 802.11bgn in the Expert > Wireless screen. The threshold (number of bytes) for the fragmentation boundary for directed messages. It is the maximum data fragment size that can be sent. This field is not configurable and the NBG6815 automatically changes to use the maximum value if you select 802.11n, 802.11an, 802.11gn or 802.11bgn in the Expert > Wireless screen. NBG6815 Users Guide 98 Chapter 11 Wireless LAN Table 33 Expert Mode > Wireless > Advanced (continued) LABEL Intra-BSS Traffic DESCRIPTION A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). Intra-BSS traffic is traffic between wireless clients in the BSS. When you Enable Intra-
BSS, wireless clients can access the wired network and communicate with each other. When you Disable Intra-BSS, wireless clients can still access the wired network but cannot communicate with each other. Set the output power of the NBG6815 in this field. If there is a high density of APs in an area, decrease the output power of the NBG6815 to reduce interference with other APs. Select one of the following 100%, 90%, 75%, 50%, 25% or 10%. Select Enable to have the NBG6815 automatically give a service a priority level according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which makes them run more smoothly. This field is not configurable and the NBG6815 automatically enables WMM QoS if you select 802.11n, 802.11an, 802.11gn or 802.11bgn in the Expert > Wireless screen. Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. Tx Power QoS Setup WMM QoS Apply Cancel 11.7 WPS Screen Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Expert Mode > Wireless > WPS. Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the NBG6815. NBG6815 Users Guide 99 Chapter 11 Wireless LAN Figure 64 Expert Mode > Wireless > WPS The following table describes the labels in this screen. Table 34 Expert Mode > Wireless > WPS LABEL WPS Setup Band DESCRIPTION WPS PIN Code PIN Number Push Button Select the frequency band to set whether you want to apply the wireless and security settings to the default 2.4GHz or 5GHz wireless LAN. Select Enable to turn on the WPS feature. Otherwise, select Disable. Select Enable and click Apply to allow the PIN Configuration method. If you select Disable, you cannot create a new PIN number. This is the WPS PIN (Personal Identification Number) of the NBG6815. Enter this PIN in the configuration utility of the device you want to connect to the NBG6815 using WPS. The PIN is not necessary when you use WPS push-button method. Click Generate to generate a new PIN number. Use this button when you use the PBC (Push Button Configuration) method to configure wireless stationss wireless settings. Click this to start WPS-aware wireless station scanning and the wireless security information synchronization. NBG6815 Users Guide 100 Chapter 11 Wireless LAN Table 34 Expert Mode > Wireless > WPS (continued) LABEL Or input stations PIN number DESCRIPTION Use this button when you use the PIN Configuration method to configure wireless stations wireless settings. Type the same PIN number generated in the wireless stations utility. Then click Start to associate to each other and perform the wireless security information synchronization. WPS Status Status Release Configuration 802.11 Mode SSID Security Apply Cancel This displays Configured when the NBG6815 has connected to a wireless network using WPS or when WPS Enable is selected and wireless or wireless security settings have been changed. The current wireless and wireless security settings also appear in the screen. This displays Unconfigured if WPS is disabled and there are no wireless or wireless security changes on the NBG6815 or you click Release Configuration to remove the configured wireless and wireless security settings. This button is only available when the WPS status displays Configured. Click this button to remove all configured wireless and wireless security settings for WPS connections on the NBG6815. This is the 802.11 mode used. Only compliant WLAN devices can associate with the NBG6815. This is the name of the wireless network (the NBG6815s first SSID). This is the type of wireless security employed by the network. Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. 11.8 Scheduling Screen Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To open this screen, click Expert Mode > Wireless > Scheduling. NBG6815 Users Guide 101 Chapter 11 Wireless LAN Figure 65 Expert Mode > Wireless > Scheduling The following table describes the labels in this screen. Table 35 Expert Mode > Wireless > Scheduling LABEL Band DESCRIPTION Select the frequency band to set whether you want to apply the wireless and security settings to the default 2.4GHz or 5GHz wireless LAN. Select Enable to activate the wireless LAN scheduling feature. Select Disable to turn it off. Wireless LAN Scheduling Scheduling WLAN Status Day From~Until Apply Cancel Select On or Off to specify whether the Wireless LAN is turned on or off. This field works in conjunction with the Day and For the following times fields. Select Everyday or the specific days to turn the Wireless LAN on or off. If you select Everyday you can not select any specific days. This field works in conjunction with the For the following times field. Select a begin time using the first set of hour and minute (min) drop down boxes and select an end time using the second set of hour and minute (min) drop down boxes. If you have chosen On earlier for the WLAN Status the Wireless LAN will turn on between the two times you enter in these fields. If you have chosen Off earlier for the WLAN Status the Wireless LAN will turn off between the two times you enter in these fields. Click Apply to save your changes back to the NBG6815. Click Cancel to reload the previous configuration for this screen. NBG6815 Users Guide 102 CHAPTER 12 LAN 12.1 Overview This chapter describes how to configure LAN settings. A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same building or floor of a building. Figure 66 LAN Example The LAN screens can help you configure a manage IP address, and partition your physical network into logical networks. 12.2 What You Can Do Use the LAN IP screen to configure the IPv4 and IPv6 addresses for your NBG6815 on the LAN
(Section 12.4 on page 104). Use the Static DHCP screen to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses (Section 12.5 on page 105). Use the IPv6 LAN screen to configure the IPv6 address for your NBG6815 on the LAN (Section 12.6 on page 106). 12.3 What You Need To Know The actual physical connection determines whether the NBG6815 ports are LAN or WAN ports. There are two separate IP networks, one inside the LAN network and the other outside the WAN network as shown next. NBG6815 Users Guide 103 Chapter 12 LAN Figure 67 LAN and WAN IP Addresses The LAN parameters of the NBG6815 are preset in the factory with the following values:
IPv4 address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits) DHCP server enabled with 32 client IPv4 addresses starting from 192.168.1.33. These parameters should work for the majority of installations. 12.4 LAN IP Screen Use this screen to change the IP address for your NBG6815. Click Expert Mode > LAN > LAN IP. Figure 68 Expert Mode > LAN > LAN IP The following table describes the labels in this screen. Table 36 Expert Mode > LAN > LAN IP LABEL IP Address IP Subnet Mask DESCRIPTION Type the IP address of your NBG6815 in dotted decimal notation. The subnet mask specifies the network number portion of an IP address. Your NBG6815 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the NBG6815. NBG6815 Users Guide 104 Chapter 12 LAN Table 36 Expert Mode > LAN > LAN IP (continued) LABEL DHCP Server DESCRIPTION Select Enable to activate DHCP for LAN. DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients (computers) to obtain TCP/IP configuration at startup from a server. Enable the DHCP server unless your ISP instructs you to do otherwise. Select Disable to stop the NBG6815 acting as a DHCP server. When configured as a server, the NBG6815 provides TCP/IP configuration for the clients. If not, DHCP service is disabled and you must have another DHCP server on your LAN, or else the computers must be manually configured. When set as a server, fill in the following four fields. This field specifies the first of the contiguous addresses in the IP address pool for LAN. This field specifies the size, or count of the IP address pool for LAN. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. IP Pool Starting Address Pool Size Apply Cancel 12.5 Static DHCP Screen This screen allows you to assign IP addresses on the LAN to specific individual computers based on their MAC addresses. To change your NBG6815s static DHCP settings, click Expert Mode > LAN > Static DHCP. Figure 69 Expert Mode > LAN > Static DHCP The following table describes the labels on this screen. Table 37 Expert Mode > LAN > Static DHCP LABEL
#
DESCRIPTION This is the index number of the static IP table entry (row). Select Auto Detection to automatically detect the MAC address of a computer on your LAN. Otherwise, select User define to enter the MAC address of a computer on your LAN in the MAC Address field. Type the MAC address (with colons) of a computer on your LAN.This field displays the MAC address of a computer on your LAN. If you select User define in the # field, enter the MAC address(es) manually. Type the LAN IP address of a computer on your LAN.This field displays the LAN IP address of a computer on your LAN. If you select User define in the # field, enter the IP address(es) manually. Click to add the rule in the MAC filter summary table. MAC Address IP Address Add/Delete Click to remove a rule. NBG6815 Users Guide 105 Chapter 12 LAN Table 37 Expert Mode > LAN > Static DHCP (continued) LABEL Apply Cancel DESCRIPTION Click Apply to save your changes with the NBG6815. Click Cancel to begin configuring this screen afresh. 12.6 IPv6 LAN Screen Use this screen to configure the IP address for your NBG6815 on the LAN. Click Expert Mode >
LAN > IPv6 LAN. Figure 70 Expert Mode > LAN > IPv6 LAN The following table describes the labels in this screen. Table 38 Expert Mode > LAN > IPv6 LAN LABEL LAN IPv6 Address Assignment Enable_DHCPv6-PD DESCRIPTION Select this option to use DHCPv6 prefix delegation. The NBG6815 will obtain an IPv6 prefix from the ISP or a connected uplink router for the LAN. Autoconfiguration Type Select SLAAC + RDNSS to enable IPv6 stateless auto-configuration on this interface. The interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in the network. Select SLAAC + Stateless DHCPv6 to enable IPv6 stateless auto-configuration on this interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The IP address information gets through DHCPv6. Select Stateful DHCPv6 to allow a DHCP server to assign and pass IPv6 network addresses, prefixes and other configuration information to DHCP clients. Enter the beginning of the range of IP addresses that this address object represents. Enter the end of the range of IP address that this address object represents. IPv6 Address range
(Start) IPv6 Address range
(End) NBG6815 Users Guide 106 Chapter 12 LAN Table 38 Expert Mode > LAN > IPv6 LAN (continued) LABEL IPv6 Lifetime Static IP Address DESCRIPTION Enter the IPv6 lifetime in the LAN. Select this option to manually enter an IPv6 address if you want to use a static IP address. LAN IPv6 Address Enter the LAN IPv6 address you want to assign to your NBG6815 in hexadecimal notation. Enter the 48 to 64 address prefix length to specify in an IPv6 address compose the network address. Enter the preferred lifetime for the prefix. LAN IPv6 Prefix Length (48~64) Prefix Preferred Lifetime Prefix Valid Lifetime Enter the valid lifetime for the prefix. Link Local Only Select this option to only use the link local address on the NBG6815 interfaces in the LAN. ULA Select this option to identify a unique local address of the NBG6815 in the LAN. RA period Minimum RA period Enter the minimum time in seconds between router advertisement messages. Apply Cancel Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. NBG6815 Users Guide 107 CHAPTER 13 Applications 13.1 Overview This chapter shows you how to configure parental control, bandwidth management, USB media sharing, UPnP and file sharing. 13.1.1 What You Can Do Use the Parental Control screens to enable parental control, configure the parental control rules and schedules, and send e-mail notifications. (Section 13.2 on page 110). Use the Bandwidth Management screen to configure bandwidth management and the device priority (Section 13.3 on page 116). Use the USB Media Sharing screen to use the NBG6815 as a media server and allow DLNA-
compliant devices to play media files stored in the attached USB device (Section 13.4 on page 119). Use the UPnP screen to enable UPnP on your NBG6815 (Section 13.5 on page 121). Use the File Sharing screen to allow file sharing via the NBG6815 using Windows Explorer, the workgroup name or FTP (Section 13.6 on page 122). Use the One Connect screen to enable or disable Wi-Fi auto-configuration (Section 13.7 on page 129). 13.1.2 What You Need To Know The following terms and concepts may help as you read through this chapter. Keyword Blocking URL Checking The NBG6815 checks the URLs domain name (or IP address) and file path separately when performing keyword blocking. The URLs domain name or IP address is the characters that come before the first slash in the URL. For example, with the URL www.zyxel.com.tw/news/pressroom.php, the domain name is www.zyxel.com.tw. The file path is the characters that come after the first slash in the URL. For example, with the URL www.zyxel.com.tw/news/pressroom.php, the file path is news/pressroom.php. Since the NBG6815 checks the URLs domain name (or IP address) and file path separately, it will not find items that go across the two. For example, with the URL www.zyxel.com.tw/news/
pressroom.php, the NBG6815 would find tw in the domain name (www.zyxel.com.tw). It would also find news in the file path (news/pressroom.php) but it would not find tw/news. NBG6815 Users Guide 108 Chapter 13 Applications DLNA The Digital Living Network Alliance (DLNA) is a group of personal computer and electronics companies that works to make products compatible in a home network. DLNA clients play files stored on DLNA servers. The NBG6815 can function as a DLNA-compliant media server and stream files to DLNA-compliant media clients without any configuration. Workgroup name This is the name given to a set of computers that are connected on a network and share resources such as a printer or files. Windows automatically assigns the workgroup name when you set up a network. File Systems A file system is a way of storing and organizing files on your hard drive and storage device. Often different operating systems such as Windows or Linux have different file systems. The file-sharing feature on your NBG6815 supports New Technology File System (NTFS), File Allocation Table (FAT) and FAT32 file systems. Windows/CIFS Common Internet File System (CIFS) is a standard protocol supported by most operating systems in order to share files across the network. CIFS runs over TCP/IP but uses the SMB (Server Message Block) protocol found in Microsoft Windows for file and printer access; therefore, CIFS will allow all applications, not just Web browsers, to open and share files across the Internet. The NBG6815 uses Common Internet File System (CIFS) protocol for its file sharing functions. CIFS compatible computers can access the USB file storage devices connected to the NBG6815. CIFS protocol is supported on Microsoft Windows, Linux Samba and other operating systems (refer to your systems specifications for CIFS compatibility). Samba SMB is a client-server protocol used by Microsoft Windows systems for sharing files, printers, and so on. Samba is a free SMB server that runs on most Unix and Unix-like systems. It provides an implementation of an SMB client and server for use with non-Microsoft operating systems. File Transfer Protocol This is a method of transferring data from one computer to another over a network such as the Internet. NBG6815 Users Guide 109 Chapter 13 Applications Universal Plug-and-Play (UPnP) UPnP hardware is identified as an icon in the Network Connections folder (Windows XP). Each UPnP compatible device installed on your network will appear as a separate icon. Selecting the icon of a UPnP device will allow you to access the information and properties of that device. 13.1.3 Before You Begin 1 2 Make sure the NBG6815 is connected to your network and turned on. Connect the USB device to one of the NBG6815s USB ports. The NBG6815 detects the USB device and makes its contents available for browsing. If you are connecting a USB hard drive that comes with an external power supply, make sure it is connected to an appropriate power source that is on. Note: If your USB device cannot be detected by the NBG6815, see the troubleshooting for suggestions. 13.2 Parental Control Parental Control allows you to block specific URLs. You can also define time periods and days during which the NBG6815 performs parental control on a specific user. 13.2.1 General Screen Use this screen to enable parental control, view the parental control rules and schedules. In Expert mode, click Applications > Parental Control > General to open the following screen. Figure 71 Expert Mode > Applications > Parental Control > General NBG6815 Users Guide 110 Chapter 13 Applications The following table describes the fields in this screen. DESCRIPTION Table 39 Expert Mode > Applications > Parental Control > General LABEL General Parental Control Add new rules Parental Control Rules
#
Status This shows the index number of the rule. This indicates whether the rule is active or not. Click this if you want to configure a new parental control rule. Select Enable to activate parental control. Otherwise, select Disable to turn it off. User Name Schedule Modify Bonus Remaining Time Apply Cancel A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This shows the name of the user to which this rule applies. This shows whether the user is able to access the Internet through the NBG6815 (Allow) or not (Block) at the moment. Click the Edit icon to go to the screen where you can edit the rule. Click the Delete icon to delete an existing rule. If the user is currently not permitted to access the Internet, you can click the Bonus to allow access for a specified period of time. A screen then displays allowing you to set how long (in minutes) the user is allowed to access the Internet. This button is grayed out if the user is now able to access the Internet. This field displays the amount of Internet access time that remains for each user before the NBG6815 blocks the user from accessing the Internet. None means there is no extra Internet access time. Click Apply to save your changes. Click Cancel to restore your previously saved settings. 13.2.1.1 Add/Edit a Parental Control Rule Click Add new rules in the Parental Control screen to add a new rule or click the Edit icon next to an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL filtering settings to block the users on your network from accessing certain web sites. NBG6815 Users Guide 111 Chapter 13 Applications Figure 72 Expert Mode > Applications > Parental Control > General: Add/Edit new rules The following table describes the fields in this screen. DESCRIPTION Table 40 Expert Mode > Applications > Parental Control > General: Add/Edit new rules LABEL General Active User Name Device List Select the checkbox to activate this parental control rule. Enter a descriptive name for the user. The left text box lists the system name of the LAN user device which is connected to the NBG6815 and assigned an IP address. From the left text box, select the LAN user device to which you want to apply this rule and click Add to move it to the right text box. Internet Access Schedule To remove a user device, select it from the right text box and click Delete. The y-axis shows the days that you want the NBG6815 to perform parental control and allow the user to access the Internet. The x-axis shows the time period during which the LAN user is allowed access. Clean All Select All A blue block signifies that this rule is active. A gray block signifies that this rule is not active. Click Clean All to remove blocks you selected. Click Select All to choose all blocks. NBG6815 Users Guide 112 Chapter 13 Applications Table 40 Expert Mode > Applications > Parental Control > General: Add/Edit new rules (continued) LABEL Network Service Network Service Setting If you select Block, the NBG6815 prohibits the users from using the services listed below. DESCRIPTION Add new service
#
Service Name Protocol:Port Modify If you select Allow, the NBG6815 blocks all services except ones listed below. Click this to show a screen in which you can add a new service rule. You can configure the Service Name, Protocol, and Port of the new rule. This shows the index number of the rule. Select the checkbox next to the rule to activate it. This shows the name of the service. This shows the protocol and the port of the service. Click the Edit icon to go to the screen where you can edit the rule. Click the Delete icon to delete an existing rule. Block Site/URL Keyword Keyword Keyword List Apply Back Enter a keyword and click Add to add it to the keyword list. This has the NBG6815 block access to the website URLs that contain the keyword. Select a keyword and click Delete to remove it. Click Clear All to remove all keywords from the keyword list. Click Apply to save your settings back to the NBG6815. Click Back to return to the previous screen. 13.2.1.2 Add/Edit a Service Click Add new service in the Parental Control > Add new rules screen to add a new entry or click the Edit icon next to an existing entry to edit it. Use this screen to configure a service rule. Figure 73 Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new service The following table describes the fields in this screen. Table 41 Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new service LABEL Service Name DESCRIPTION Select the name of the service. Otherwise, select UserDefined and manually specify the protocol and the port of the service. Protocol If you have chosen a pre-defined service in the Service Name field, this field will not be configurable. Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP/
UDP. NBG6815 Users Guide 113 Chapter 13 Applications Table 41 Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new service (continued) LABEL Port DESCRIPTION Enter the port of the service. If you have chosen a pre-defined service in the Service Name field, this field will not be configurable. Click Apply to save your settings with the NBG6815. Click Back to return to the previous screen. Apply Back 13.2.2 Notification Screen Use this screen to have the NBG6815 send e-mail notifications when the user(s) is connected to the NBG6815 for Internet access during the specified time periods. In Expert mode, click Applications > Parental Control > Notification to open the following screen. Figure 74 Expert Mode > Applications > Parental Control > Notification The following table describes the fields in this screen. DESCRIPTION Table 42 Expert Mode > Applications > Parental Control > Notification LABEL General E-mail Notification Add new rules Notification Rules
#
Select Enable to activate e-mail notifications. Click this if you want to configure a new parental monitor rule. This shows the index number of the rule. NBG6815 Users Guide 114 Chapter 13 Applications Table 42 Expert Mode > Applications > Parental Control > Notification (continued) LABEL Status DESCRIPTION This indicates whether the rule is active or not. User Name Notification Modify A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This shows the name of the user to which this rule applies. This shows the e-mail address to which the notification is sent. Click the Edit icon to go to the screen where you can edit the rule. Click the Delete icon to delete an existing rule. Email Notification Configuration Mail Server Select the mail server. Otherwise, select UserDefined and manually specify the mail server address and the port of the mail server. Type the name or IP address of the outgoing SMTP server. Mail Server Address Mail Server Port Enter the same port number here as is on the mail server for mail traffic. Authentication Username Authentication Password Mail From Type the user name to provide to the SMTP server for authentication when the notification is e-mailed. Type the password to provide to the SMTP server for authentication when the notification is e-mailed. Type the e-mail address from which the outgoing e-mail is delivered. This address is used in replies. Type the e-mail address (or addresses) to which the outgoing e-mail is delivered. Click Apply to save your changes. Click Cancel to restore your previously saved settings. E-Mail Apply Cancel 13.2.2.1 Add/Edit a Notification Rule Click Add new rules in the Notification screen to add a new rule or click the Edit icon next to an existing rule to edit it. Use this screen to set a schedule and have the NBG6815 send a notification when the specified user connects to the NBG6815 at the scheduled time. Figure 75 Expert Mode > Applications > Notification: Add/Edit new rules NBG6815 Users Guide 115 Chapter 13 Applications The following table describes the fields in this screen. DESCRIPTION Table 43 Expert Mode > Applications > Notification: Add/Edit new rules LABEL Notification Active Home Network User Select the checkbox to activate this notification rule. Select the user that you want to apply this rule to from the drop-down list box. Note: You should have configured a parental control rule already for the specified user. Schedule Day Time (Begin ~
End) Apply Back Select check boxes for the days that you want the NBG6815 to perform notification. Define the time period during that you want the NBG6815 to perform notification. Click Apply to save your settings back to the NBG6815. Click Back to return to the previous screen. 13.3 Bandwidth Management The NBG6815 supports the new StreamBoost technology, introduced by Qualcomm, to redistribute traffic over the NBG6815 for the best possible performance in a home network. Streamboost is smart Quality of Service (QoS). Streamboost detects traffic flow and applies traffic shaping policies automatically. It gives each device and each application priority and provides the exact amount of bandwidth they need at a given time. This helps free up bandwidth for other applications or connected devices. If there is not enough bandwidth for optimal performance, Streamboost makes sure the application or device has the minimum acceptable bandwidth which is determined according to StreamBoosts cloud-based database. Real-time application traffic (such as on-line games or communications) and video/audio streaming are given the highest priority. Downloads or torrent files are classified as best effort and placed lower than general network traffic (general browsing). In the figure below, the StreamBoost-enabled NBG6815 differentiates incoming traffic flow going from the LAN device (A) or wireless device (B) to the Internet. It shapes traffic and gives priority and allocates bandwidth according to traffic types. NBG6815 Users Guide 116 Chapter 13 Applications Figure 76 StreamBoost Management Example B A 13.3.1 Bandwidth Screen Use this screen to configure the maximum allowable bandwidth on the NBG6815 and allow the NBG6815 to get StreamBoost database updates automatically. In Expert mode, click Applications > Bandwidth Management > Bandwidth to open the following screen. Figure 77 Expert Mode > Applications > Bandwidth Management > Bandwidth NBG6815 Users Guide 117 Chapter 13 Applications The following table describes the labels in this screen. Table 44 Expert Mode > Applications > Bandwidth Management > Bandwidth LABEL Enable StreamBoost Up Limit (Mbps) DESCRIPTION Select this option to turn on Streamboost management on the NBG6815. If you select Automatic Bandwidth Detection, this automatically displays the total amount of bandwidth that you can dedicate to uplink (or outgoing) traffic. If you dont select Automatic Bandwidth Detection, set the total amount of bandwidth that you want to dedicate to uplink (or outgoing) traffic. Down Limit (Mbps) This is traffic from LAN/WLAN to WAN. If you select Automatic Bandwidth Detection, this automatically displays the total amount of bandwidth that you can dedicate to downlink (or incoming) traffic. If you dont select Automatic Bandwidth Detection, set the total amount of bandwidth that you want to dedicate to downlink (or incoming) traffic. This is traffic from WAN to LAN/WLAN. Run Bandwidth Test Click Test Bandwidth to determine the maximum bandwidth of your internet Enable Automatic Update Apply Cancel connection. StreamBoost provides a cloud-based service to learn any new type of traffic which is not in its database and update the table in the NBG6815 for traffic detection and policies. Select this option to have theNBG6815 automatically receives the StreamBoost table updates. When there is a new type of traffic which is not in the NBG6815s table, the NBG6815 will capture some packets and send them to the StreamBoost cloud for analysis and database update. Click Apply to save your customized settings. Click Cancel to begin configuring this screen afresh. 13.3.2 Priorities Screen The StreamBoost engine on the NBG6815 can identify the types of connected devices (such as PC, smart phone, tablet, TV or game console) in your network. When there is not enough bandwidth to support traffic of the same priority, the NBG6815 refers to the connected device priority. Traffic from the device with the lowest priority is classified as best-effort traffic. Use this screen to prioritize the connected devices by clicking a devices arrow button to change its position in the list. Click Save to apply your settings. Otherwise, click Cancel to return the screen to its last-saved settings. In Expert mode, click Applications > Bandwidth Management > Priorities to open the following screen. NBG6815 Users Guide 118 Chapter 13 Applications Figure 78 Expert Mode > Applications > Bandwidth Management > Priorities 13.4 USB Media Sharing Screen You can set up your NBG6815 to act as a media server to provide media (like video) to DLNA-
compliant players, such as Windows Media Player, ZyXEL DMAs (Digital Media Adapters), Xboxes or PS3s. The media server and clients must have IP addresses in the same subnet. The NBG6815 media server enables you to:
Publish all folders for everyone to play media files in the USB storage device connected to the NBG6815. Use hardware-based media clients like the DMA-2500 to play the files. Note: Anyone on your network can play the media files in the published folders. No user name and password nor other form of security is required. The following figure is an overview of the NBG6815s media server feature. DLNA devices A and B can access and play files on a USB device (C) which is connected to the NBG6815 (D). NBG6815 Users Guide 119 Chapter 13 Applications Figure 79 Media Server Overview A B C D Use this screen to have the NBG6815 act as a DLNA-compliant media server that lets DLNA-
compliant media clients on your network play video, music, and photos from the NBG6815 (without having to copy them to another computer). In Expert mode, click Applications > USB Media Sharing to open the following screen. Figure 80 Expert Mode > Applications > USB Media Sharing The following table describes the labels in this screen. DESCRIPTION Table 45 Expert Mode > Applications > USB Media Sharing LABEL DLNA Setup Enable DLNA Enable Shared Media Types USB1/USB2 Select this to have the NBG6815 function as a DLNA-compliant media server. Select the media type that you want to share on the USB device connected to the NBG6815s USB port. Rescan Media Contents Rescan Click this button to have the NBG6815 scan the media files on the connected USB device and do indexing of the file list again so that DLNA clients can find the new files if any. NBG6815 Users Guide 120 Chapter 13 Applications Table 45 Expert Mode > Applications > USB Media Sharing (continued) LABEL Apply Cancel DESCRIPTION Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. 13.5 UPnP Screen Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. Use this screen to enable UPnP on your NBG6815. In Expert mode, click Applications > UPnP to open the following screen. Figure 81 Expert Mode > Applications > UPnP The following table describes the fields in this screen. Table 46 Expert Mode > Applications > UPnP LABEL UPnP DESCRIPTION Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open the web configurator's login screen without entering the NBG6815's IP address
(although you must still enter the password to access the web configurator). Select the page number from the drop-down list box to display the UPnP port mapping rules. Display UPnP Portmap Table
#
Protocol In Port This is the number of an individual UPnP entry. This is the transport layer protocol used for the service. In Port is a port that a LAN computer uses when it requests a particular service. This port is only applicable to the local network. This field displays the port number of the UPnP entry. NBG6815 Users Guide 121 Chapter 13 Applications Table 46 Expert Mode > Applications > UPnP (continued) LABEL Out Port DESCRIPTION Out Port is the well-known port that the WAN server uses to reply to the LAN computer that made the request using In Port. In the below example, In Port 8000 is paired with Out Port 80. A user on the WAN could enter http://A.B.C.D:8000 to access the internal computer with private IP address 192.168.77.55 where A.B.C.D is the WAN IP address or URL of the NBG6815. IP Address Apply Cancel This field displays the port number of the UPnP entry. This field displays the IP address of this UPnP entry. Click Apply to save the setting to the NBG6815. Click Cancel to return to the previously saved settings. 13.6 File Sharing You can also share files on a USB memory stick or hard drive connected to your NBG6815 with users on your network. The following figure is an overview of the NBG6815s file-sharing server feature. Computers A and B can access files on a USB device (C) which is connected to the NBG6815 (D). Figure 82 File Sharing Overview B A C D Note: The read and write performance may be affected by amount of file-sharing traffic on your network, type of connected USB device and your USB version (1.1 or 2.0). 13.6.1 SAMBA Server Screen Use this screen to set up file-sharing via the NBG6815 using Windows Explorer or the workgroup name. You can also configure the workgroup name and create file-sharing user accounts. In Expert mode, click Applications > File Sharing > SAMBA to open the following screen. NBG6815 Users Guide 122 Chapter 13 Applications Figure 83 Expert Mode > Applications > File Sharing > SAMBA The following table describes the labels in this screen. Table 47 Expert Mode > Applications > File Sharing > SAMBA LABEL SAMBA Setup Enable SAMBA DESCRIPTION Name Work Group Description USB Access USB1/USB2 User Accounts
#
Select this to enable file sharing through the NBG6815 using Windows Explorer or by browsing to your work group. Specify the name to identify the NBG6815 in a work group. You can add the NBG6815 to an existing or a new workgroup on your network. Enter the name of the workgroup which your NBG6815 automatically joins. You can set the NBG6815s workgroup name to be exactly the same as the workgroup name to which your computer belongs to. Note: The NBG6815 will not be able to join the workgroup if your local area network has restrictions set up that do not allow devices to join a workgroup. In this case, contact your network administrator. Enter the description of the NBG6815 in a work group. Specify the users access rights to the USB storage device which is connected to the NBG6815s USB port. Read & Write - The user has read and write rights, meaning that the user can create and edit the files on the connected USB device. Read - The user has read rights only and can not create or edit the files on the connected USB device. Before you can share files you need a user account. Configure the following fields to set up a file-sharing account. This is the index number of the user account. NBG6815 Users Guide 123 Chapter 13 Applications Table 47 Expert Mode > Applications > File Sharing > SAMBA LABEL Enable DESCRIPTION This field displays whether a user account is activated or not. Select the check box to enable the account. Clear the check box to disable the account. Enter a user name that will be allowed to access the shared files. You can enter up to 20 characters. Only letters and numbers allowed. Enter the password used to access the shared files. You can enter up to 20 characters. Only letters and numbers are allowed. The password is case sensitive. Select the USB port(s) of the NBG6815. The configured user can access the files on the USB device(s) connected to the selected USB port(s) only. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. User Name Password USB1/USB2 Apply Cancel 13.6.2 FTP Server Screen Use this screen to set up file sharing via the NBG6815 using FTP and create user accounts. In Expert mode, click Applications > File Sharing > FTP to open the following screen. Figure 84 Expert Mode > Applications > File Sharing > FTP The following table describes the labels in this screen. Table 48 Expert Mode > Applications > File Sharing > FTP LABEL Enable FTP Port DESCRIPTION Select this to enable the FTP server on the NBG6815 for file sharing using FTP. You may change the server port number for FTP if needed, however you must use the same port number in order to use that service for file sharing. Before you can share files you need a user account. Configure the following fields to set up a file-sharing account. This is the index number of the user account. This field displays whether a user account is activated or not. Select the check box to enable the account. Clear the check box to disable the account. User Accounts
#
Enable NBG6815 Users Guide 124 Chapter 13 Applications Table 48 Expert Mode > Applications > File Sharing > FTP LABEL User Name DESCRIPTION Enter a user name that will be allowed to access the shared files. You can enter up to 20 characters. Only letters and numbers allowed. Enter the password used to access the shared files. You can enter up to 20 characters. Only letters and numbers are allowed. The password is case sensitive. Specify the users access rights to the USB storage device which is connected to the NBG6815s USB port. Read & Write - The user has read and write rights, meaning that the user can create and edit the files on the connected USB device. Read - The user has read rights only and can not create or edit the files on the connected USB device. None - The user cannot access the files on the USB device(s) connected to the USB port. Enter the maximum bandwidth (in Kbps) allowed for incoming FTP traffic. Enter the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. Password USB1/USB2 Upstream Bandwidth Downstream Bandwidth Apply Cancel 13.6.3 Example of Accessing Your Shared Files From a Computer You can use Windows Explorer or FTP to access the USB storage devices connected to the NBG6815. This example shows you how to use Microsofts Windows XP to browse your shared files. Refer to your operating systems documentation for how to browse your file structure. Use Windows Explorer to Share Files You should have enabled file sharing and create a user account (Bob/1234 for example) with read and write access to USB 1 in the Applications > File Sharing > SAMBA screen. Open Windows Explorer to access the connected USB device using either Windows Explorer browser or by browsing to your workgroup. NBG6815 Users Guide 125 Chapter 13 Applications 1 In Windows Explorers Address bar type a double backslash \\ followed by the IP address of the NBG6815 (the default IP address of the NBG6815 in router mode is 192.168.1.1) and press
[ENTER]. A screen asking for password authentication appears. Type the user name and password
(Bob and 1234 in this example) and click OK. Note: Once you log into the shared folder via your NBG6815, you do not have to relogin unless you restart your computer. NBG6815 Users Guide 126 Chapter 13 Applications 2 You can also use the workgroup name to access files by browsing to the workgroup folder using the folder tree on the left side of the screen. It is located under My Network Places. In this example the workgroup name is the default Workgroup. Use FTP to Share Files You can use FTP to access the USB storage devices connected to the NBG6815. In this example, we use the web browser to share files via FTP from the LAN. The way or screen you log into the FTP server (on the NBG6815) varies depending on your FTP client. See your FTP client documentation for more information. You should have enabled file sharing and create a user account (Bob/1234 for example) with read and write access to USB 1 in the Applications > File Sharing > FTP screen. 1 In your web browsers address or URL bar type ftp:// followed by the IP address of the NBG6815
(the default LAN IP address of the NBG6815 in router mode is 192.168.1.1) and click Go or press
[ENTER]. NBG6815 Users Guide 127 Chapter 13 Applications 2 A screen asking for password authentication appears. Enter the user name and password (you configured in the Applications > File Sharing > FTP screen) and click Log On. 3 The screen changes and shows you the folder for the USB storage device connected to your NBG6815. Double-click the folder to display the contents in it. NBG6815 Users Guide 128 Chapter 13 Applications 13.7 One Connect Screen One Connect is a ZyXEL-proprietary feature. It complies with the IEEE 1905.1 standard and allows auto-detection and auto-configuration. If your wireless router supports ZyXEL One Connect, NBG6815 for example, you can download and install the ZyXEL One Connect App in your mobile device to check the connection status, do speed test, turn on or turn off the devices in your network, block or allow a devices access and set up a guest Wi-Fi network from the mobile device. You can even use the App to access the NBG6815s web configurator. The mobile device with the App installed must be connected to the NBG6815 wirelessly. Figure 85 ZyXEL One Connect App Use this screen to enable or disable Wi-Fi auto-configuration on the NBG6815. In Expert mode, click Applications > One Connect to open the following screen. Figure 86 Expert Mode > Applications > One Connect The following table describes the labels in this screen. Table 49 Expert Mode > Applications > One Connect LABEL One Connect QR Code DESCRIPTION Scan the QR code and go to a website to download the ZyXEL One Connect App in your mobile device. One is for the iTunes App Store, and the other is for Google Play. One Connect Compatible Devices NBG6815 Users Guide 129 Chapter 13 Applications Table 49 Expert Mode > Applications > One Connect LABEL Auto-
configurationAutom atically Update AP/
Repeater Wi-Fi Settings Apply Cancel DESCRIPTION Select Enable to allow the NBG6815 to automatically update the wireless settings on the APs or wireless repeaters (which also support ZyXEL One Connect) in its network. Select Disable to turn this feature off if you want to have the APs or repeaters in the network use different wireless settings. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. 13.8 Technical Reference The following section contains additional technical information about the NBG6815 features described in this chapter. Customizing Keyword Blocking URL Checking You can use commands to set how much of a websites URL the content filter is to check for keyword blocking. See the appendices for information on how to access and use the command interpreter. Domain Name or IP Address URL Checking By default, the NBG6815 checks the URLs domain name or IP address when performing keyword blocking. This means that the NBG6815 checks the characters that come before the first slash in the URL. For example, with the URL www.zyxel.com.tw/news/pressroom.php, content filtering only searches for keywords within www.zyxel.com.tw. Full Path URL Checking Full path URL checking has the NBG6815 check the characters that come before the last slash in the URL. For example, with the URL www.zyxel.com.tw/news/pressroom.php, full path URL checking searches for keywords within www.zyxel.com.tw/news/. Use the ip urlfilter customize actionFlags 6 [disable | enable] command to extend (or not extend) the keyword blocking search to include the URL's full path. File Name URL Checking Filename URL checking has the NBG6815 check all of the characters in the URL. For example, filename URL checking searches for keywords within the URL www.zyxel.com.tw/
news/pressroom.php. NBG6815 Users Guide 130 Chapter 13 Applications Use the ip urlfilter customize actionFlags 8 [disable | enable] command to extend (or not extend) the keyword blocking search to include the URL's complete filename. NAT Traversal UPnP NAT traversal automates the process of allowing an application to operate through NAT. UPnP network devices can automatically configure network addressing, announce their presence in the network to other UPnP devices and enable exchange of simple product and service descriptions. NAT traversal allows the following:
Dynamic port mapping Learning public IP addresses Assigning lease times to mappings Windows Messenger is an example of an application that supports NAT traversal and UPnP. See the NAT chapter for more information on NAT. Cautions with UPnP The automated nature of NAT traversal applications in establishing their own services and opening firewall ports may present network security issues. Network information and configuration may also be obtained and modified by users in some network environments. When a UPnP device joins a network, it announces its presence with a multicast message. For security reasons, the NBG6815 allows multicast messages on the LAN only. All UPnP-enabled devices may communicate freely with each other without additional configuration. Disable UPnP if this is not your intention. NBG6815 Users Guide 131 CHAPTER 14 Security 14.1 Overview Use these screens to enable and configure the firewall that protects your NBG6815 and your LAN from unwanted or malicious traffic. Enable the firewall to protect your LAN computers from attacks by hackers on the Internet and control access between the LAN and WAN. By default the firewall:
allows traffic that originates from your LAN computers to go to all of the networks. blocks traffic that originates on the other networks from going to the LAN. The following figure illustrates the default firewall action. User A can initiate an IM (Instant Messaging) session from the LAN to the WAN (1). Return traffic for this session is also allowed (2). However other traffic initiated from the WAN is blocked (3 and 4). Figure 87 Default Firewall Action LAN WAN A 1 2 3 4 14.1.1 What You Can Do Use the IPv4 Firewall screen to enable or disable the NBG6815s IPv4 firewall (Section 14.2 on page 133). Use the IPv6 Firewall screen to enable or disable the NBG6815s IPv6 firewall (Section 14.3 on page 135). 14.1.2 What You Need To Know The following terms and concepts may help as you read through this chapter. NBG6815 Users Guide 132 Chapter 14 Security About the NBG6815 Firewall The NBG6815s firewall feature physically separates the LAN and the WAN and acts as a secure gateway for all data passing between the networks. It is a stateful inspection firewall and is designed to protect against Denial of Service attacks when activated (click the IPv4 Firewall or IPv6 Firewall tab under Security and then click the Enable Firewall check box). The NBG6815's purpose is to allow a private Local Area Network (LAN) to be securely connected to the Internet. The NBG6815 can be used to prevent theft, destruction and modification of data, as well as log events, which may be important to the security of your network. The NBG6815 is installed between the LAN and a broadband modem connecting to the Internet. This allows it to act as a secure gateway for all data passing between the Internet and the LAN. The NBG6815 has one Ethernet WAN port and four Ethernet LAN ports, which are used to physically separate the network into two areas.The WAN (Wide Area Network) port attaches to the broadband
(cable or DSL) modem to the Internet. The LAN (Local Area Network) port attaches to a network of computers, which needs security from the outside world. These computers will have access to Internet services such as e-mail, FTP and the World Wide Web. However, "inbound access" is not allowed (by default) unless the remote host is authorized to use a specific service. Guidelines For Enhancing Security With Your Firewall Change the default password via Web Configurator. Think about access control before you connect to the network in any way, including attaching a modem to the port. Limit who can access your router. 1 2 3 4 Don't enable any local service (such as NTP) that you don't use. Any enabled service could present a potential security risk. A determined hacker might be able to find creative ways to misuse the enabled services to access the firewall or the network. 5 6 7 For local services that are enabled, protect against misuse. Protect by configuring the services to communicate only with specific peers, and protect by configuring rules to block packets for the services at specific interfaces. Protect against IP spoofing by making sure the firewall is active. Keep the firewall in a secured (locked) room. 14.2 IPv4 Firewall Screen Use this screen to enable or disable the NBG6815s IPv4 firewall, and set up firewall logs. Click Expert Mode > Security > IPv4 Firewall to open the firewall setup screen. NBG6815 Users Guide 133 Chapter 14 Security Figure 88 Expert Mode > Security > IPv4 Firewall The following table describes the labels in this screen. Table 50 Expert Mode > Security > IPv4 Firewall LABEL ICMP Respond to Ping on Firewall Setup Enable Firewall Enable Firewall Rule Enable Firewall Rule Add Firewall Rule Service Name MAC Address DESCRIPTION Internet Control Message Protocol is a message control and error-reporting protocol between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP) datagrams, but the messages are processed by the TCP/IP software and directly apparent to the application user. The NBG6815 will not respond to any incoming Ping requests when Disable is selected. Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming WAN Ping requests. Otherwise select LAN&WAN to reply to all incoming LAN and WAN Ping requests. Select this check box to activate the firewall. The NBG6815 performs access control and protects against Denial of Service (DoS) attacks when the firewall is activated. Select this check box to activate the firewall rules that you define (see Add Firewall Rule below). Enter a name that identifies or describes the firewall rule. Enter the MAC address of the computer for which the firewall rule applies. NBG6815 Users Guide 134 Chapter 14 Security Table 50 Expert Mode > Security > IPv4 Firewall (continued) LABEL Dest IP Address DESCRIPTION Enter the IP address of the computer to which traffic for the application or service is entering. The NBG6815 applies the firewall rule to traffic initiating from this computer. Source IP Address Enter the IP address of the computer that initializes traffic for the application or service. Protocol Dest Port Range Source Port Range Add Rule Firewall Rule
#
Service Name MAC addresse Dest IP Source IP Protocol Dest Port Range Source Port Range Action Delete Apply Cancel The NBG6815 applies the firewall rule to traffic initiating from this computer. Select the protocol (TCP, UDP or ICMP) used to transport the packets for which you want to apply the firewall rule. This is the port number/range of the destination that define the traffic type, for example TCP port 80 defines web traffic. This is the port number/range of the source that define the traffic type, for example TCP port 80 defines web traffic. Click Add Rule to save the firewall rule. This is your firewall rule number. The ordering of your rules is important as rules are applied in turn. This is a name that identifies or describes the firewall rule. This is the MAC address of the computer for which the firewall rule applies. This is the IP address of the computer to which traffic for the application or service is entering. This is the IP address of the computer from which traffic for the application or service is initialized. This is the protocol (TCP, UDP or ICMP) used to transport the packets for which you want to apply the firewall rule. This is the port number/range of the destination that define the traffic type, for example TCP port 80 defines web traffic. This is the port number/range of the source that define the traffic type, for example TCP port 80 defines web traffic. DROP - Traffic matching the conditions of the firewall rule are stopped. Click Delete to remove the firewall rule. Click Apply to save the settings. Click Cancel to start configuring this screen again. 14.3 IPv6 Firewall Screen This chapter shows you how to enable and create IPv6 firewall rules to block unwanted IPv6 traffic. NBG6815 Users Guide 135 Chapter 14 Security Click Expert Mode > Security > IPv6 Firewall. The IPv6 Firewall screen appears as shown. Figure 89 Expert Mode > Security > IPv6 Firewall The following table describes the labels in this screen. Table 51 Expert Mode > Security > IPv6 Firewall LABEL Enable Firewall Rule Enable Firewall Rule Select this check box to activate the firewall rules that you define (see Add Firewall DESCRIPTION Rule below). Add Firewall Rule Service Name MAC Address Dest IP Address Source IP Address Protocol Dest Port Range Source Port Range Add Rule Firewall Rule
#
Enter a name that identifies or describes the firewall rule. Enter the MAC address of the computer for which the firewall rule applies. Enter the IPv6 address of the computer to which traffic for the application or service is entering. The NBG6815 applies the firewall rule to traffic destined for this computer. Enter the IPv6 address of the computer that initializes traffic for the application or service. The NBG6815 applies the firewall rule to traffic initiating from this computer. Select the protocol (TCP, UDP or ICMPv6) used to transport the packets for which you want to apply the firewall rule. Enter the port number/range of the destination that defines the traffic type, for example TCP port 80 defines web traffic. Enter the port number/range of the source that defines the traffic type, for example TCP port 80 defines web traffic. Click Add Rule to save the firewall rule. This is your firewall rule number. The ordering of your rules is important as rules are applied in turn. NBG6815 Users Guide 136 Chapter 14 Security Table 51 Expert Mode > Security > IPv6 Firewall (continued) LABEL ServiceName MAC Address Dest IP DESCRIPTION This is a name that identifies or describes the firewall rule. This is the MAC address of the computer for which the firewall rule applies. This is the IP address of the computer to which traffic for the application or service is entering. This is the IP address of the computer to which traffic for the application or service is initialized. This is the protocol (TCP, UDP or ICMPv6) used to transport the packets for which you want to apply the firewall rule. This is the port number/range of the destination that defines the traffic type, for example TCP port 80 defines web traffic. This is the port number/range of the source that defines the traffic type, for example TCP port 80 defines web traffic. DROP - Traffic matching the conditions of the firewall rule is stopped. Click Delete to remove the firewall rule. Click Apply to save the settings. Click Cancel to restore your previously saved settings. Source IP Protocol Dest Port Range Source Port Range Action Delete Apply Cancel NBG6815 Users Guide 137 CHAPTER 15 Maintenance 15.1 Overview This chapter provides information on the Maintenance screens. 15.2 What You Can Do Use the General screen to set the timeout period of the management session (Section 15.3 on page 138). Use the Password screen to change your NBG6815s system password (Section 15.4 on page 139). Use the Time screen to change your NBG6815s time and date (Section 15.5 on page 140). Use the Firmware Upgrade screen to upload firmware to your NBG6815 (Section 15.6 on page 142). Use the Backup/Restore screen to view information related to factory defaults, backup configuration, and restoring configuration (Section 15.7 on page 143). Use the Restart screen to reboot the NBG6815 without turning the power off (Section 15.8 on page 144). Use the Language screen to change the language for the Web Configurator (Section 15.9 on page 144). Use the Remote Management screen to configure the interface/s from which the NBG6815 can be managed remotely and specify a secure client that can manage the NBG6815. (Section 15.10 on page 145). Use the Log screen to see the logs for the activity on the NBG6815 (Section 15.11 on page 148). Use the Operation Mode screen to select how you want to use your NBG6815 (Section 15.13 on page 150). 15.3 General Screen Use this screen to set the management session timeout period. Click Expert Mode >
Maintenance > General. The following screen displays. NBG6815 Users Guide 138 Chapter 15 Maintenance Figure 90 Expert Mode > Maintenance > General The following table describes the labels in this screen. Table 52 Expert Mode > Maintenance > General LABEL System Name Domain Name Administrator Inactivity Timer DESCRIPTION System Name is a unique name to identify the NBG6815 in an Ethernet network. Enter the domain name you want to give to the NBG6815. Type how many minutes a management session can be left idle before the session times out. The default is 5 minutes. After it times out you have to log in with your password again. Very long idle timeouts may have security risks. A value of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. Apply Cancel 15.4 Password Screen It is strongly recommended that you change your NBG6815's password. If you forget your NBG6815's password (or IP address), you will need to reset the device. See Section 15.8 on page 144 for details. Click Expert Mode > Maintenance > Password. The screen appears as shown. Figure 91 Expert Mode > Maintenance > Password The following table describes the labels in this screen. Table 53 Expert Mode > Maintenance > Password LABEL Old Password DESCRIPTION Type the default password or the existing password you use to access the system in this field. Type your new system password (up to 30 characters). Note that as you type a password, the screen displays an asterisk (*) for each character you type. Type the new password again in this field. New Password Retype to Confirm NBG6815 Users Guide 139 Chapter 15 Maintenance Table 53 Expert Mode > Maintenance > Password (continued) LABEL Apply Cancel DESCRIPTION Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. 15.5 Time Screen Use this screen to configure the NBG6815s time based on your local time zone. To change your NBG6815s time and date, click Expert Mode > Maintenance > Time. The screen appears as shown. Figure 92 Expert Mode > Maintenance > Time The following table describes the labels in this screen. Table 54 Expert Mode > Maintenance > Time LABEL Current Time and Date Current Time DESCRIPTION This field displays the time of your NBG6815. Current Date Time and Date Setup Manual Each time you reload this page, the NBG6815 synchronizes the time with the time server. This field displays the date of your NBG6815. Each time you reload this page, the NBG6815 synchronizes the date with the time server. Select this radio button to enter the time and date manually. If you configure a new time and date, Time Zone and Daylight Saving at the same time, the new time and date you entered has priority and the Time Zone and Daylight Saving settings do not affect it. NBG6815 Users Guide 140 Chapter 15 Maintenance Table 54 Expert Mode > Maintenance > Time (continued) LABEL New Time DESCRIPTION This field displays the last updated time from the time server or the last time configured manually.
(hh:mm:ss) New Date
(yyyy/mm/dd) Get from Time Server User Defined Time Server Address Time Zone Setup Time Zone Daylight Savings Start Date End Date Apply Cancel When you select Manual, enter the new time in this field and then click Apply. This field displays the last updated date from the time server or the last date configured manually. When you select Manual, enter the new date in this field and then click Apply. Select this radio button to have the NBG6815 get the time and date from the time server you specified below. Select User Defined Time Server Address and enter the IP address or URL (up to 20 extended ASCII characters in length) of your time server. Check with your ISP/network administrator if you are unsure of this information. Choose the time zone of your location. This will set the time difference between your time zone and Greenwich Mean Time (GMT). Daylight saving is a period from late spring to early fall when many countries set their clocks ahead of normal local time by one hour to give more daytime light in the evening. Select this option if you use Daylight Saving Time. Configure the day and time when Daylight Saving Time starts if you selected Daylight Savings. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time starts in most parts of the United States on the second Sunday of March. Each time zone in the United States starts using Daylight Saving Time at 2 A.M. local time. So in the United States you would select Second, Sunday, March and select 2 in the at field. Daylight Saving Time starts in the European Union on the last Sunday of March. All of the time zones in the European Union start using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, March. The time you select in the at field depends on your time zone. In Germany for instance, you would select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Configure the day and time when Daylight Saving Time ends if you selected Daylight Savings. The at field uses the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first Sunday of November. Each time zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the United States you would select First, Sunday, November and select 2 in the at field. Daylight Saving Time ends in the European Union on the last Sunday of October. All of the time zones in the European Union stop using Daylight Saving Time at the same moment (1 A.M. GMT or UTC). So in the European Union you would select Last, Sunday, October. The time you select in the at field depends on your time zone. In Germany for instance, you would select 2 because Germany's time zone is one hour ahead of GMT or UTC (GMT+1). Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. NBG6815 Users Guide 141 Chapter 15 Maintenance 15.6 Firmware Upgrade Screen Find firmware at www.zyxel.com in a file that uses the version number and project code with a
*.bin extension, e.g., V1.00(AARO.0).bin. The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot. Click Expert Mode > Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your NBG6815. Figure 93 Expert Mode > Maintenance > Firmware Upgrade The following table describes the labels in this screen. Table 55 Expert Mode > Maintenance > Firmware Upgrade LABEL File Path Choose File DESCRIPTION Click Choose File to find the location of the file you want to upload in this field. Click Choose File to find the .bin file you want to upload. Remember that you must decompress compressed (.zip) files before you can upload them. Click Upload to begin the upload process. This process may take up to two minutes. Click this to check for the latest updated firmware. Upload Check for Latest Firmware Now Note: Do not turn off the NBG6815 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the NBG6815 again. The NBG6815 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop. Figure 94 Network Temporarily Disconnected After two minutes, log in again and check your new firmware version in the Status screen. If the upload was not successful, an error message appears. Click Return to go back to the Firmware Upgrade screen. NBG6815 Users Guide 142 Chapter 15 Maintenance 15.7 Backup/Restore Screen Backup configuration allows you to back up (save) the NBG6815s current configuration to a file on your computer. Once your NBG6815 is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes. The backup configuration file will be useful in case you need to return to your previous settings. Restore configuration allows you to upload a new or previously saved configuration file from your computer to your NBG6815. Click Expert Mode > Maintenance > Backup/Restore. Information related to factory defaults, backup configuration, and restoring configuration appears as shown next. Figure 95 Expert Mode > Maintenance > Backup/Restore The following table describes the labels in this screen. Table 56 Expert Mode > Maintenance > Backup/Restore LABEL Backup File Path Choose File DESCRIPTION Click Backup to save the NBG6815s current configuration to your computer. Click Choose File to find the location of the file you want to upload in this field. Click Choose File to find the file you want to upload. Remember that you must decompress compressed (.ZIP) files before you can upload them. NBG6815 Users Guide 143 Chapter 15 Maintenance Table 56 Expert Mode > Maintenance > Backup/Restore (continued) LABEL Upload DESCRIPTION Click Upload to begin the upload process. Note: Do not turn off the NBG6815 while configuration file upload is in progress. After you see a configuration upload successful screen, you must then wait one minute before logging into the NBG6815 again. The NBG6815 automatically restarts in this time causing a temporary network disconnect. If you see an error screen, click Back to return to the Backup/Restore screen. Pressing the Reset button in this section clears all user-entered configuration information and returns the NBG6815 to its factory defaults. You can also press the RESET button on the rear panel to reset the factory defaults of your NBG6815. Refer to the chapter about introducing the Web Configurator for more information on the RESET button. Reset Note: If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NBG6815 IP address (192.168.1.1). See Appendix B on page 168 for details on how to set up your computers IP address. 15.8 Restart Screen System restart allows you to reboot the NBG6815 without turning the power off. Click Expert Mode > Maintenance > Restart to open the following screen. Figure 96 Expert Mode > Maintenance > Restart Click Restart to have the NBG6815 reboot. This does not affect the NBG6815's configuration. 15.9 Language Screen Use this screen to change the language for the Web Configurator. Select the language you prefer and click Apply. The Web Configurator language changes after a while without restarting the NBG6815. Click Expert Mode > Maintenance > Language to open the following screen. NBG6815 Users Guide 144 Chapter 15 Maintenance Figure 97 Expert Mode > Maintenance > Language 15.10 Remote Management Screen Remote Management allows you to manage your NBG6815 from a remote location through the LAN/WLAN or WAN interface. 15.10.1 Remote Access Use this screen to change your NBG6815s remote management settings. You can use Telnet, HTTP or HTTPS to access and manage the NBG6815. Click Expert Mode > Maintenance > Remote Management > Remote Access to open the following screen. NBG6815 Users Guide 145 Chapter 15 Maintenance Figure 98 Expert Mode > Maintenance > Remote Management > Remote Access The following table describes the labels in this screen. Table 57 Expert Mode > Maintenance > Remote Management > WAN Access LABEL WWW Port DESCRIPTION Access Status Secured Client IP Address Telnet You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Select the interface(s) through which a computer may access the NBG6815 using this service. Select All to allow all computes to access the NBG6815. Otherwise, check Selected and specify the IP address of the computer that can access the NBG6815. NBG6815 Users Guide 146 Chapter 15 Maintenance Table 57 Expert Mode > Maintenance > Remote Management > WAN Access LABEL Port DESCRIPTION You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Select the interface(s) through which a computer may access the NBG6815 using this service. Select All to allow all computes to access the NBG6815. Otherwise, check Selected and specify the IP address of the computer that can access the NBG6815. You may change the server port number for a service if needed, however you must use the same port number in order to use that service for remote management. Select the interface(s) through which a computer may access the NBG6815 using this service. Select All to allow all computes to access the NBG6815. Otherwise, check Selected and specify the IP address of the computer that can access the NBG6815. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. Access Status Secured Client IP Address HTTPS Port Access Status Secured Client IP Address Apply Cancel 15.10.2 Wake On LAN Wake On LAN (WoL) allows you to remotely turn on a device on the network, such as a computer, storage device or media server. To use this feature the remote hardware (for example the network adapter on a computer) must support Wake On LAN using the Magic Packet method. You need to know the MAC address of the remote device. It may be on a label on the device. Use this screen to remotely turn on a device on the network. Click the Expert Mode >
Maintenance > Remote Management > Wake On LAN to open the following screen. Figure 99 Expert Mode > Maintenance > Remote Management > Wake On LAN NBG6815 Users Guide 147 Chapter 15 Maintenance The following table describes the labels in this screen. Table 58 Expert Mode > Maintenance > Remote Management > Wake On LAN LABEL DESCRIPTION Wake On LAN over WAN Settings Enable Wake On LAN over WAN Select Enable to have the NBG6815 forward a WoL Magic Packet to all devices on the LAN if the packet comes from the WAN or remote network and uses the port number specified in the Port field. A LAN device whose hardware supports Wake on LAN then will be powered on if it is turned off previously. Type a port number from which a WoL packet is forwarded to the LAN. Port Wake On LAN Wake MAC Address Start Apply Cancel This field displays the hostname and MAC address of the LAN device by default. Otherwise, select User define to Eenter the MAC Address of the device on the network that will be turned on. A MAC address consists of six hexadecimal character pairs. Click this to have the NBG6815 generate a WoL packet and forward it to turn the specified device on. A screen pops up displaying MAC address error if you input the MAC address incorrectly. Click Apply to save your changes back to the NBG6815. Click Cancel to begin configuring this screen afresh. 15.11 Log Screen The Web Configurator allows you to look at all of the NBG6815s logs in one location. You can configure which logs to display in the Log screen. Select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the screen afresh. Use this screen to see the logged messages for the NBG6815. The log wraps around and deletes the old entries after it fills. Select what logs you want to see from the Display drop list. The log choices depend on your settings above this screen. Click Refresh to renew the log screen. Click Clear Log to delete all the logs. NBG6815 Users Guide 148 Chapter 15 Maintenance Figure 100 Expert Mode > Maintenance > Log 15.12 System Operation Mode Overview The Sys OP Mode (System Operation Mode) function lets you configure your NBG6815 as a router or access point. You can choose between Router Mode, and Access Point Mode depending on your network topology and the features you require from your device. The following describes the device modes available in your NBG6815. Router A router connects your local network with another network, such as the Internet. The router has two IP addresses, the LAN IP address and the WAN IP address. NBG6815 Users Guide 149 Chapter 15 Maintenance Figure 101 LAN and WAN IP Addresses in Router Mode Access Point An access point enabled all ethernet ports to be bridged together and be in the same subnet. To connect to the Internet, another device, such as a router, is required. Figure 102 Access Point Mode 15.13 Operation Mode Screen Use this screen to select how you want to use your NBG6815. NBG6815 Users Guide 150 Chapter 15 Maintenance Figure 103 Expert Mode > Maintenance > Operation Mode The following table describes the labels in the Operation Mode screen. Table 59 Expert Mode > Maintenance > Operation Mode LABEL Configuration Mode Router Mode DESCRIPTION Select Router Mode if your device routes traffic between a local network and another network such as the Internet. This mode offers services such as a firewall or bandwidth management. Access Point Mode You can configure the IP address settings on your WAN port. Contact your ISP or system administrator for more information on appropriate settings. Select Access Point Mode if your device bridges traffic between clients on the same network. In Access Point Mode, all Ethernet ports have the same IP address. All ports on the rear panel of the device are LAN ports, including the port labeled WAN. There is no WAN port. The DHCP server on your device is disabled. Router functions (such as NAT, bandwidth management, remote management, firewall and so on) are not available when the NBG6815 is in Access Point Mode. The IP address of the device on the local network is set to 192.168.1.2. Click Apply to save your settings. Click Cancel to return your settings to the default (Router). Apply Cancel Note: If you select the incorrect system operation Mode you may not be able to connect to the Internet. NBG6815 Users Guide 151 CHAPTER 16 Troubleshooting 16.1 Overview This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories. Power, Hardware Connections, and LEDs NBG6815 Access and Login Internet Access Resetting the NBG6815 to Its Factory Defaults Wireless Connections USB Device Problems 16.2 Power, Hardware Connections, and LEDs The NBG6815 does not turn on. None of the LEDs turn on. 1 Make sure you are using the power adaptor or cord included with the NBG6815. 2 Make sure the power adaptor or cord is connected to the NBG6815 and plugged in to an appropriate power source. Make sure the power source is turned on. 3 Disconnect and re-connect the power adaptor or cord to the NBG6815. 4 If the problem continues, contact the vendor. One of the LEDs does not behave as expected. 1 Make sure you understand the normal behavior of the LED. See Section 1.7 on page 12. 2 3 Check the hardware connections. See the Quick Start Guide. Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adaptor to the NBG6815. NBG6815 Users Guide 152 Chapter 16 Troubleshooting 5 If the problem continues, contact the vendor. 16.3 NBG6815 Access and Login I dont know the IP address of my NBG6815. 6 7 8 9 The default IP address of the NBG6815 in Router Mode is 192.168.1.1. If the NBG6815 obtains a WAN IP address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be changed to 10.0.0.1 automatically. See Auto-IP Change on page 69 for more information. The default IP address of the NBG6815 in Access Point Mode is 192.168.1.2. If you changed the IP address and have forgotten it, you might get the IP address of the NBG6815 in Router Mode by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the NBG6815 (it depends on the network), so enter this IP address in your Internet browser. If your NBG6815 in Access Point Mode is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. Reset your NBG6815 to change all settings back to their default. This means your current settings are lost. See Section 16.5 on page 156 in the Troubleshooting for information on resetting your NBG6815. I forgot the password. 1 2 The default password is 1234. If this does not work, you have to reset the device to its factory defaults. See Section 16.5 on page 156. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct IP address. 2 The default IP address of the NBG6815 in Router Mode is 192.168.1.1. If the NBG6815 obtains a WAN IP address in the same subnet as the LAN IP address 192.168.1.1, the default LAN IP address will be changed to 10.0.0.1 automatically. See Auto-IP Change on page 69 for more information. The default IP address of the NBG6815 in Access Point Mode is 192.168.1.2. If you changed the IP address (Section 12.4 on page 104), use the new IP address. NBG6815 Users Guide 153 Chapter 16 Troubleshooting If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I dont know the IP address of my NBG6815. 3 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 4 Make sure your Internet browser does not block pop-up windows and has JavaScript and Java enabled. See Appendix A on page 159. 5 Make sure your computer is in the same subnet as the NBG6815. (If you know that there are routers between your computer and the NBG6815, skip this step.) If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. See Section 12.4 on page 104. If there is no DHCP server on your network, make sure your computers IP address is in the same subnet as the NBG6815. See Section 12.4 on page 104. 6 7 Reset the device to its factory defaults, and try to access the NBG6815 with the default IP address. See Section 1.5 on page 11. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestions Try to access the NBG6815 using another service, such as Telnet. If you can access the NBG6815, check the remote management settings and firewall rules to find out why the NBG6815 does not respond to HTTP. If your computer is connected to the WAN port or is connected wirelessly, use a computer that is connected to a LAN/ETHERNET port. I can see the Login screen, but I cannot log in to the NBG6815. 1 Make sure you have entered the password correctly. The default password is 1234. This field is case-sensitive, so make sure [Caps Lock] is not on. 2 This can happen when you fail to log out properly from your last session. Try logging in again after 5 minutes. 3 Disconnect and re-connect the power adaptor or cord to the NBG6815. 4 If this does not work, you have to reset the device to its factory defaults. See Section 16.5 on page 156. 16.4 Internet Access I cannot access the Internet. NBG6815 Users Guide 154 Chapter 16 Troubleshooting 1 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide. 2 Go to Expert > Maintenance > Operation Mode. Check your System Operation Mode setting. If the NBG6815 is in Router Mode, make sure the WAN port is connected to a broadband modem or router with Internet access. Your computer and the NBG6815 should be in the same subnet. If the NBG6815 is in Access Point Mode, make sure the WAN port is connected to a broadband modem or router with Internet access and your computer is set to obtain an dynamic IP address. 3 4 If the NBG6815 is in Router Mode, make sure you entered your ISP account information correctly in the wizard or the WAN screen. These fields are case-sensitive, so make sure [Caps Lock] is not on. If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless client are the same as the settings in the AP. 5 Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. 6 If the problem continues, contact your ISP. I cannot access the Internet anymore. I had access to the Internet (with the NBG6815), but my Internet connection is not available anymore. 1 2 3 Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick Start Guide and Section 1.7 on page 12. Reboot the NBG6815. If the problem continues, contact your ISP. The Internet connection is slow or intermittent. 1 2 3 4 There might be a lot of traffic on the network. Look at the LEDs, and check Section 1.7 on page 12. If the NBG6815 is sending or receiving a lot of information, try closing some programs that use the Internet, especially peer-to-peer applications. Check the signal strength. If the signal strength is low, try moving the NBG6815 closer to the AP if possible, and look around to see if there are any devices that might be interfering with the wireless network (for example, microwaves, other wireless networks, and so on). Reboot the NBG6815. If the problem continues, contact the network administrator or vendor, or try one of the advanced suggestions. Advanced Suggestion NBG6815 Users Guide 155 Chapter 16 Troubleshooting Check the settings for QoS. If it is disabled, you might consider activating it. 16.5 Resetting the NBG6815 to Its Factory Defaults If you reset the NBG6815, you lose all of the changes you have made. The NBG6815 re-loads its default settings, and the password resets to 1234. You have to make all of your changes again. You will lose all of your changes when you push the RESET button. To reset the NBG6815:
1 Make sure the power LED is on. 2 3 Press the RESET button for one to four seconds to restart/reboot the NBG6815. Press the RESET button for longer than five seconds to set the NBG6815 back to its factory-default configurations. If the NBG6815 restarts automatically, wait for the NBG6815 to finish restarting, and log in to the Web Configurator. The password is 1234. If the NBG6815 does not restart automatically, disconnect and reconnect the NBG6815s power. Then, follow the directions above again. 16.6 Wireless Connections I cannot access the NBG6815 or ping any computer from the WLAN. 1 Make sure the wireless LAN is enabled on the NBG6815. 2 Make sure the wireless adapter on your computer is working properly. 3 Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports the same wireless standard as the NBG6815. 4 Make sure your computer (with a wireless adapter installed) is within the transmission range of the NBG6815. 5 Check that both the NBG6815 and the wireless adapter on your computer are using the same wireless and wireless security settings. 6 Make sure traffic between the WLAN and the LAN is not blocked by the firewall on the NBG6815. NBG6815 Users Guide 156 Chapter 16 Troubleshooting 7 Make sure you allow the NBG6815 to be remotely accessed through the WLAN interface. Check your remote management settings. See the chapter on Wireless LAN in the Users Guide for more information. I set up URL keyword blocking, but I can still access a website that should be blocked. Make sure that you enable parental control in the Parental Control screen, set up rules and turn on the rules. Make sure that the keywords that you type are listed in the rules Keyword List. If a keyword that is listed in the Keyword List is not blocked when it is found in a URL, customize the keyword blocking using commands. See the Keyword Blocking URL Checking section in the Applications chapter. I cannot access the Web Configurator after I switched to AP mode. When you change from router mode to AP mode, your computer must have an IP address in the range between 192.168.1.3 and 192.168.1.254. Refer to Appendix B on page 168 for instructions on how to change your computers IP address. What factors may cause intermittent or unstabled wireless connection? How can I solve this problem?
The following factors may cause interference:
Obstacles: walls, ceilings, furniture, and so on. Building Materials: metal doors, aluminum studs. Electrical devices: microwaves, monitors, electric motors, cordless phones, and other wireless devices. To optimize the speed and quality of your wireless connection, you can:
Move your wireless device closer to the AP if the signal strength is low. Reduce wireless interference that may be caused by other wireless networks or surrounding wireless electronics such as cordless phones. Place the AP where there are minimum obstacles (such as walls and ceilings) between the AP and the wireless client. Reduce the number of wireless clients connecting to the same AP simultaneously, or add additional APs if necessary. Try closing some programs that use the Internet, especially peer-to-peer applications. If the wireless client is sending or receiving a lot of information, it may have too many programs open that use the Internet. NBG6815 Users Guide 157 Chapter 16 Troubleshooting Position the antennas for best reception. If the AP is placed on a table or floor, point the antennas upwards. If the AP is placed at a high position, point the antennas downwards. Try pointing the antennas in different directions and check which provides the strongest signal to the wireless clients. 16.7 USB Device Problems I cannot access or see a USB device that is connected to the NBG6815. 1 Disconnect the problematic USB device, then reconnect it to the NBG6815. 2 3 4 5 6 Ensure that the USB device has power. Check your cable connections. Restart the NBG6815 by disconnecting the power and then reconnecting it. If the USB device requires a special driver, install the driver from the installation disc that came with the device. After driver installation, reconnect the USB device to the NBG6815 and try to connect to it again with your computer. If the problem persists, contact your vendor. What kind of USB devices do the NBG6815 support?
1 It is strongly recommended to use version 2.0 or lower USB storage devices (such as memory sticks, USB hard drives) and/or USB devices. Other USB products are not guaranteed to function properly with the NBG6815. NBG6815 Users Guide 158
1 2 3 | User manual-2 | Users Manual | 3.79 MiB |
APPENDIX A Pop-up Windows, JavaScript and Java Permissions In order to use the web configurator you need to allow:
Web browser pop-up windows from your device. JavaScript (enabled by default). Java permissions (enabled by default). Note: The screens used below belong to Internet Explorer version 6, 7 and 8. Screens for other Internet Explorer versions may vary. Internet Explorer Pop-up Blockers You may have to disable pop-up blocking to log into your device. Either disable pop-up blocking (enabled by default in Windows XP SP (Service Pack) 2) or allow pop-up blocking and create an exception for your devices IP address. Disable Pop-up Blockers 1 In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off Pop-up Blocker. Figure 104 Pop-up Blocker You can also check if pop-up blocking is disabled in the Pop-up Blocker section in the Privacy tab. 1 2 In Internet Explorer, select Tools, Internet Options, Privacy. Clear the Block pop-ups check box in the Pop-up Blocker section of the screen. This disables any web pop-up blockers you may have enabled. NBG6815 Users Guide 159 Appendix A Pop-up Windows, JavaScript and Java Permissions Figure 105 Internet Options: Privacy 3 Click Apply to save this setting. Enable Pop-up Blockers with Exceptions Alternatively, if you only want to allow pop-up windows from your device, see the following steps. 1 2 In Internet Explorer, select Tools, Internet Options and then the Privacy tab. Select Settingsto open the Pop-up Blocker Settings screen. NBG6815 Users Guide 160 Appendix A Pop-up Windows, JavaScript and Java Permissions Figure 106 Internet Options: Privacy 3 4 Type the IP address of your device (the web page that you do not want to have blocked) with the prefix http://. For example, http://192.168.167.1. Click Add to move the IP address to the list of Allowed sites. Figure 107 Pop-up Blocker Settings NBG6815 Users Guide 161 Appendix A Pop-up Windows, JavaScript and Java Permissions 5 6 Click Close to return to the Privacy screen. Click Apply to save this setting. JavaScript If pages of the web configurator do not display properly in Internet Explorer, check that JavaScript are allowed. 1 In Internet Explorer, click Tools, Internet Options and then the Security tab. Figure 108 Internet Options: Security 2 3 Click the Custom Level... button. Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default). 6 Click OK to close the window. NBG6815 Users Guide 162 Appendix A Pop-up Windows, JavaScript and Java Permissions Figure 109 Security Settings - Java Scripting Java Permissions 1 2 3 From Internet Explorer, click Tools, Internet Options and then the Security tab. Click the Custom Level... button. Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected. 5 Click OK to close the window. NBG6815 Users Guide 163 Appendix A Pop-up Windows, JavaScript and Java Permissions Figure 110 Security Settings - Java JAVA (Sun) 1 From Internet Explorer, click Tools, Internet Options and then the Advanced tab. 2 Make sure that Use Java 2 for <applet> under Java (Sun) is selected. 3 Click OK to close the window. Figure 111 Java (Sun) NBG6815 Users Guide 164 Appendix A Pop-up Windows, JavaScript and Java Permissions Mozilla Firefox Mozilla Firefox 2.0 screens are used here. Screens for other versions may vary slightly. The steps below apply to Mozilla Firefox 3.0 as well. You can enable Java, Javascript and pop-ups in one screen. Click Tools, then click Options in the screen that appears. Figure 112 Mozilla Firefox: TOOLS > Options Click Content to show the screen below. Select the check boxes as shown in the following screen. Figure 113 Mozilla Firefox Content Security NBG6815 Users Guide 165 Appendix A Pop-up Windows, JavaScript and Java Permissions Opera Opera 10 screens are used here. Screens for other versions may vary slightly. Allowing Pop-Ups From Opera, click Tools, then Preferences. In the General tab, go to Choose how you prefer to handle pop-ups and select Open all pop-ups. Figure 114 Opera: Allowing Pop-Ups Enabling Java From Opera, click Tools, then Preferences. In the Advanced tab, select Content from the left-
side menu. Select the check boxes as shown in the following screen. NBG6815 Users Guide 166 Appendix A Pop-up Windows, JavaScript and Java Permissions Figure 115 Opera: Enabling Java To customize JavaScript behavior in the Opera browser, click JavaScript Options. Figure 116 Opera: JavaScript Options Select the items you want Operas JavaScript to apply. NBG6815 Users Guide 167 APPENDIX B Setting Up Your Computers IP Address Note: Your specific NBG6815 may not support all of the operating systems described in this appendix. See the product specifications for more information about which operating systems are supported. This appendix shows you how to configure the IP settings on your computer in order for it to be able to communicate with the other devices on your network. Windows Vista/XP/2000, Mac OS 9/
OS X, and all versions of UNIX/LINUX include the software components you need to use TCP/IP on your computer. If you manually assign IP information instead of using a dynamic IP, make sure that your networks computers have IP addresses that place them in the same subnet. In this appendix, you can set up an IP address for:
Windows XP/NT/2000 on page 168 Windows Vista on page 171 Windows 7 on page 174 Mac OS X: 10.3 and 10.4 on page 178 Mac OS X: 10.5 and 10.6 on page 181 Linux: Ubuntu 8 (GNOME) on page 184 Linux: openSUSE 10.3 (KDE) on page 188 Windows XP/NT/2000 The following example uses the default Windows XP display theme but can also apply to Windows 2000 and Windows NT. 1 Click Start > Control Panel. NBG6815 Users Guide 168 Appendix B Setting Up Your Computers IP Address 2 In the Control Panel, click the Network Connections icon. 3 Right-click Local Area Connection and then select Properties. 4 On the General tab, select Internet Protocol (TCP/IP) and then click Properties. NBG6815 Users Guide 169 Appendix B Setting Up Your Computers IP Address 5 The Internet Protocol TCP/IP Properties window opens. NBG6815 Users Guide 170 Appendix B Setting Up Your Computers IP Address 6 7 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. Windows Vista This section shows screens from Windows Vista Professional. 1 Click Start > Control Panel. 2 In the Control Panel, click the Network and Internet icon. NBG6815 Users Guide 171 Appendix B Setting Up Your Computers IP Address 3 Click the Network and Sharing Center icon. 4 Click Manage network connections. 5 Right-click Local Area Connection and then select Properties. Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 6 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. NBG6815 Users Guide 172 Appendix B Setting Up Your Computers IP Address 7 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. NBG6815 Users Guide 173 Appendix B Setting Up Your Computers IP Address 8 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided.Click Advanced. 9 Click OK to close the Internet Protocol (TCP/IP) Properties window. 10 Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also go to Start > Control Panel > Network Connections, right-click a network connection, click Status and then click the Support tab to view your IP address and connection information. Windows 7 This section shows screens from Windows 7 Enterprise. 1 Click Start > Control Panel. 2 In the Control Panel, click View network status and tasks under the Network and Internet category. NBG6815 Users Guide 174 Appendix B Setting Up Your Computers IP Address 3 Click Change adapter settings. 4 Double click Local Area Connection and then select Properties. NBG6815 Users Guide 175 Appendix B Setting Up Your Computers IP Address Note: During this procedure, click Continue whenever Windows displays a screen saying that it needs your permission to continue. 5 Select Internet Protocol Version 4 (TCP/IPv4) and then select Properties. 6 The Internet Protocol Version 4 (TCP/IPv4) Properties window opens. NBG6815 Users Guide 176 Appendix B Setting Up Your Computers IP Address 7 8 9 Select Obtain an IP address automatically if your network administrator or ISP assigns your IP address dynamically. Select Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields if you have a static IP address that was assigned to you by your network administrator or ISP. You may also have to enter a Preferred DNS server and an Alternate DNS server, if that information was provided. Click Advanced if you want to configure advanced settings for IP, DNS and WINS. Click OK to close the Internet Protocol (TCP/IP) Properties window. Click OK to close the Local Area Connection Properties window. Verifying Settings 1 2 3 Click Start > All Programs > Accessories > Command Prompt. In the Command Prompt window, type "ipconfig" and then press [ENTER]. The IP settings are displayed as follows. NBG6815 Users Guide 177 Appendix B Setting Up Your Computers IP Address Mac OS X: 10.3 and 10.4 The screens in this section are from Mac OS X 10.4 but can also apply to 10.3. 1 Click Apple > System Preferences. 2 In the System Preferences window, click the Network icon. NBG6815 Users Guide 178 Appendix B Setting Up Your Computers IP Address 3 When the Network preferences pane opens, select Built-in Ethernet from the network connection type list, and then click Configure. 4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP tab. NBG6815 Users Guide 179 Appendix B Setting Up Your Computers IP Address 5 For statically assigned settings, do the following:
From the Configure IPv4 list, select Manually. In the IP Address field, type your IP address. In the Subnet Mask field, type your subnet mask. In the Router field, type the IP address of your device. 6 Click Apply Now and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network Interface from the Info tab. NBG6815 Users Guide 180 Appendix B Setting Up Your Computers IP Address Figure 117 Mac OS X 10.4: Network Utility Mac OS X: 10.5 and 10.6 The screens in this section are from Mac OS X 10.5 but can also apply to 10.6. 1 Click Apple > System Preferences. 2 In System Preferences, click the Network icon. NBG6815 Users Guide 181 Appendix B Setting Up Your Computers IP Address 3 When the Network preferences pane opens, select Ethernet from the list of available connection types. 4 From the Configure list, select Using DHCP for dynamically assigned settings. NBG6815 Users Guide 182 Appendix B Setting Up Your Computers IP Address 5 For statically assigned settings, do the following:
From the Configure list, select Manually. In the IP Address field, enter your IP address. In the Subnet Mask field, enter your subnet mask. In the Router field, enter the IP address of your NBG6815. 6 Click Apply and close the window. Verifying Settings Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and then selecting the appropriate Network interface from the Info tab. NBG6815 Users Guide 183 Appendix B Setting Up Your Computers IP Address Figure 118 Mac OS X 10.5: Network Utility Linux: Ubuntu 8 (GNOME) This section shows you how to configure your computers TCP/IP settings in the GNU Object Model Environment (GNOME) using the Ubuntu 8 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default Ubuntu 8 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in GNOME:
1 Click System > Administration > Network. 2 When the Network Settings window opens, click Unlock to open the Authenticate window. (By default, the Unlock button is greyed out until clicked.) You cannot make changes to your configuration unless you first enter your admin password. NBG6815 Users Guide 184 Appendix B Setting Up Your Computers IP Address 3 In the Authenticate window, enter your admin account name and password then click the Authenticate button. 4 In the Network Settings window, select the connection that you want to configure, then click Properties. NBG6815 Users Guide 185 Appendix B Setting Up Your Computers IP Address 5 The Properties dialog box opens. In the Configuration list, select Automatic Configuration (DHCP) if you have a dynamic IP address. In the Configuration list, select Static IP address if you have a static IP address. Fill in the IP address, Subnet mask, and Gateway address fields. 6 7 Click OK to save the changes and close the Properties dialog box and return to the Network Settings screen. If you know your DNS server IP address(es), click the DNS tab in the Network Settings window and then enter the DNS server information in the fields provided. NBG6815 Users Guide 186 Appendix B Setting Up Your Computers IP Address 8 Click the Close button to apply the changes. Verifying Settings Check your TCP/IP properties by clicking System > Administration > Network Tools, and then selecting the appropriate Network device from the Devices tab. The Interface Statistics column shows data if your connection is working properly. NBG6815 Users Guide 187 Appendix B Setting Up Your Computers IP Address Figure 119 Ubuntu 8: Network Tools Linux: openSUSE 10.3 (KDE) This section shows you how to configure your computers TCP/IP settings in the K Desktop Environment (KDE) using the openSUSE 10.3 Linux distribution. The procedure, screens and file locations may vary depending on your specific distribution, release version, and individual configuration. The following screens use the default openSUSE 10.3 installation. Note: Make sure you are logged in as the root administrator. Follow the steps below to configure your computer IP address in the KDE:
1 Click K Menu > Computer > Administrator Settings (YaST). NBG6815 Users Guide 188 Appendix B Setting Up Your Computers IP Address 2 When the Run as Root - KDE su dialog opens, enter the admin password and click OK. 3 When the YaST Control Center window opens, select Network Devices and then click the Network Card icon. NBG6815 Users Guide 189 Appendix B Setting Up Your Computers IP Address 4 When the Network Settings window opens, click the Overview tab, select the appropriate connection Name from the list, and then click the Configure button. 5 When the Network Card Setup window opens, click the Address tab NBG6815 Users Guide 190 Appendix B Setting Up Your Computers IP Address Figure 120 openSUSE 10.3: Network Card Setup 6 7 8 Select Dynamic Address (DHCP) if you have a dynamic IP address. Select Statically assigned IP Address if you have a static IP address. Fill in the IP address, Subnet mask, and Hostname fields. Click Next to save the changes and close the Network Card Setup window. If you know your DNS server IP address(es), click the Hostname/DNS tab in Network Settings and then enter the DNS server information in the fields provided. NBG6815 Users Guide 191 Appendix B Setting Up Your Computers IP Address 9 Click Finish to save your settings and close the window. Verifying Settings Click the KNetwork Manager icon on the Task bar to check your TCP/IP properties. From the Options sub-menu, select Show Connection Information. Figure 121 openSUSE 10.3: KNetwork Manager When the Connection Status - KNetwork Manager window opens, click the Statistics tab to see if your connection is working properly. NBG6815 Users Guide 192 Appendix B Setting Up Your Computers IP Address Figure 122 openSUSE: Connection Status - KNetwork Manager NBG6815 Users Guide 193 APPENDIX C Common Services The following table lists some commonly-used services and their associated protocols and port numbers. For a comprehensive list of port numbers, ICMP type/code numbers and services, visit the IANA (Internet Assigned Number Authority) web site. Name: This is a short, descriptive name for the service. You can use this one or create a different one, if you like. Protocol: This is the type of IP protocol used by the service. If this is TCP/UDP, then the service uses the same port number with TCP and UDP. If this is USER-DEFINED, the Port(s) is the IP protocol number, not the port number. Port(s): This value depends on the Protocol. Please refer to RFC 1700 for further information about port numbers. If the Protocol is TCP, UDP, or TCP/UDP, this is the IP port number. If the Protocol is USER, this is the IP protocol number. Description: This is a brief explanation of the applications that use this service or the situations in which this service is used. Table 60 Commonly Used Services NAME AH
(IPSEC_TUNNEL) AIM/New-ICQ PROTOCOL User-Defined TCP AUTH BGP BOOTP_CLIENT BOOTP_SERVER CU-SEEME DNS ESP
(IPSEC_TUNNEL) FINGER FTP H.323 HTTP TCP TCP UDP UDP TCP UDP TCP/UDP User-Defined TCP TCP TCP TCP TCP PORT(S) 51 5190 113 179 68 67 7648 24032 53 50 79 20 21 1720 80 DESCRIPTION The IPSEC AH (Authentication Header) tunneling protocol uses this service. AOLs Internet Messenger service. It is also used as a listening port by ICQ. Authentication protocol used by some servers. Border Gateway Protocol. DHCP Client. DHCP Server. A popular videoconferencing solution from White Pines Software. Domain Name Server, a service that matches web names (for example www.zyxel.com) to IP numbers. The IPSEC ESP (Encapsulation Security Protocol) tunneling protocol uses this service. Finger is a UNIX or Internet related command that can be used to find out if a user is logged on. File Transfer Program, a program to enable fast transfer of files, including large files that may not be possible by e-mail. NetMeeting uses this protocol. Hyper Text Transfer Protocol - a client/server protocol for the world wide web. NBG6815 Users Guide 194 Appendix C Common Services Table 60 Commonly Used Services (continued) NAME HTTPS PROTOCOL TCP PORT(S) 443 ICMP User-Defined 1 ICQ IGMP (MULTICAST) UDP User-Defined IKE UDP IRC MSN Messenger TCP/UDP TCP NEW-ICQ NEWS NFS NNTP PING POP3 PPTP TCP TCP UDP TCP User-Defined TCP TCP 4000 2 500 6667 1863 5190 144 2049 119 1 110 1723 PPTP_TUNNEL
(GRE) User-Defined 47 RCMD REAL_AUDIO TCP TCP REXEC RLOGIN RTELNET RTSP SFTP SMTP TCP TCP TCP TCP/UDP TCP TCP SNMP SNMP-TRAPS TCP/UDP TCP/UDP 512 7070 514 513 107 554 115 25 161 162 DESCRIPTION HTTPS is a secured http session often used in e-
commerce. Internet Control Message Protocol is often used for diagnostic or routing purposes. This is a popular Internet chat program. Internet Group Management Protocol is used when sending packets to a specific group of hosts. The Internet Key Exchange algorithm is used for key distribution and management. This is another popular Internet chat program. Microsoft Networks messenger service uses this protocol. An Internet chat program. A protocol for news groups. Network File System - NFS is a client/server distributed file service that provides transparent file sharing for network environments. Network News Transport Protocol is the delivery mechanism for the USENET newsgroup service. Packet INternet Groper is a protocol that sends out ICMP echo requests to test whether or not a remote host is reachable. Post Office Protocol version 3 lets a client computer get e-mail from a POP3 server through a temporary connection (TCP/IP or other). Point-to-Point Tunneling Protocol enables secure transfer of data over public networks. This is the control channel. PPTP (Point-to-Point Tunneling Protocol) enables secure transfer of data over public networks. This is the data channel. Remote Command Service. A streaming audio service that enables real time sound over the web. Remote Execution Daemon. Remote Login. Remote Telnet. The Real Time Streaming (media control) Protocol
(RTSP) is a remote control for multimedia on the Internet. Simple File Transfer Protocol. Simple Mail Transfer Protocol is the message-
exchange standard for the Internet. SMTP enables you to move messages from one e-mail server to another. Simple Network Management Program. Traps for use with the SNMP (RFC:1215). NBG6815 Users Guide 195 Appendix C Common Services Table 60 Commonly Used Services (continued) NAME SQL-NET PROTOCOL TCP PORT(S) 1521 SSH STRM WORKS SYSLOG TCP/UDP UDP UDP TACACS TELNET TFTP UDP TCP UDP 22 1558 514 49 23 69 VDOLIVE TCP 7000 DESCRIPTION Structured Query Language is an interface to access data on many different types of database systems, including mainframes, midrange systems, UNIX systems and network servers. Secure Shell Remote Login Program. Stream Works Protocol. Syslog allows you to send system logs to a UNIX server. Login Host Protocol used for (Terminal Access Controller Access Control System). Telnet is the login and terminal emulation protocol common on the Internet and in UNIX environments. It operates over TCP/IP networks. Its primary function is to allow users to log into remote host systems. Trivial File Transfer Protocol is an Internet file transfer protocol similar to FTP, but uses the UDP
(User Datagram Protocol) rather than TCP
(Transmission Control Protocol). Another videoconferencing solution. NBG6815 Users Guide 196 APPENDIX D Legal Information Copyright Copyright 2015 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, mechanical, magnetic, optical, chemical, photocopying, manual, or otherwise, without the prior written permission of ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved. Disclaimers ZyXEL does not assume any liability arising out of the application or use of any products, or software described herein. Neither does it convey any license under its patent rights nor the patent rights of others. ZyXEL further reserves the right to make changes in any products described herein without notice. This publication is subject to change without notice. Your use of the NBG6815 is subject to the terms and conditions of any related service providers. Trademarks Trademarks mentioned in this publication are used for identification purposes only and may be properties of their respective owners. Regulatory Notice and Statement UNITED STATEs of AMERICA 1 2 1 2 3 4 The following information applies if you use the product within USA area. FCC EMC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which is found by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the devices. Connect the device to an outlet other than the receiver's. Consult a dealer or an experienced radio/TV technician for assistance. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 21 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. CANADA The following information applies if you use the product within Canada area. NBG6815 Users Guide 197 Appendix D Legal Information Industry Canada ICES statement CAN ICES-3 (B)/NMB-3(B) Industry Canada RSS-GEN & RSS-247 statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (2468C-NBG6815) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. If the product has 5G wireless function, the following attention shall be paid that, the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Le prsent metteur radio (2468C-NBG6815) de modle s'il fait partie du matriel de catgorieI) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Si vous utilisez le produit avec 5G sans fil fonction, suivant l'attention doit tre verse que, les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Industry Canada radiation exposure statement This device complies with IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20 cm between the radiator and your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. EUROPEAN UNION The following information applies if you use the product within the European Union. Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive) Compliance information for 2.4GHz and/or 5GHz wireless products relevant to the EU and other Countries following the EU Directive 1999/
5/EC (R&TTE).
(Bulgarian) ZyXEL , 1999/5/C. Espaol
(Spanish) etina
(Czech) Por medio de la presente ZyXEL declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ZyXEL tmto prohlauje, e tento zazen je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/EC. Dansk (Danish) Undertegnede ZyXEL erklrer herved, at flgende udstyr udstyr overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF. Deutsch
(German) Eesti keel
(Estonian)
(Greek) English Franais
(French) Hrvatski
(Croatian) slenska
(Icelandic) Hiermit erklrt ZyXEL, dass sich das Gert Ausstattung in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EU befindet. Kesolevaga kinnitab ZyXEL seadme seadmed vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele. ZyXEL 1999/5/C. Hereby, ZyXEL declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Par la prsente ZyXEL dclare que l'appareil quipements est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/EC. ZyXEL ovime izjavljuje da je radijska oprema tipa u skladu s Direktivom 1999/5/EC. Hr me lsir, ZyXEL v yfir a essi bnaur er samrmi vi grunnkrfur og nnur vieigandi kvi tilskipunar 1999/5/EC. NBG6815 Users Guide 198 Appendix D Legal Information Italiano
(Italian) Con la presente ZyXEL dichiara che questo attrezzatura conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Latvieu valoda
(Latvian) Ar o ZyXEL deklar, ka iekrtas atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem. Lietuvi kalba
(Lithuanian) iuo ZyXEL deklaruoja, kad is ranga atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Magyar
(Hungarian) Alulrott, ZyXEL nyilatkozom, hogy a berendezs megfelel a vonatkoz alapvet kvetelmnyeknek s az 1999/5/EK irnyelv egyb elrsainak. Malti (Maltese) Hawnhekk, ZyXEL, jiddikjara li dan tagmir jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Nederlands
(Dutch) Hierbij verklaart ZyXEL dat het toestel uitrusting in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EC. Polski (Polish) Niniejszym ZyXEL owiadcza, e sprzt jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Portugus
(Portuguese) ZyXEL declara que este equipamento est conforme com os requisitos essenciais e outras disposies da Directiva 1999/5/EC. Romn
(Romanian) Slovenina
(Slovak) Slovenina
(Slovene) Suomi
(Finnish) Svenska
(Swedish) Prin prezenta, ZyXEL declar c acest echipament este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 1999/5/EC. ZyXEL tmto vyhlasuje, e zariadenia spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/EC. ZyXEL izjavlja, da je ta oprema v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/EC. ZyXEL vakuuttaa tten ett laitteet tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen. Hrmed intygar ZyXEL att denna utrustning str I verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EC. Norsk
(Norwegian) Erklrer herved ZyXEL at dette utstyret er I samsvar med de grunnleggende kravene og andre relevante bestemmelser I direktiv 1999/5/EF. National Restrictions This product may be used in all EU countries (and other countries following the EU Directive 2014/53/EU) without any limitation except for the countries mentioned below:
Ce produit peut tre utilis dans tous les pays de lUE (et dans tous les pays ayant transposs la directive 2014/53/UE) sans aucune limitation, except pour les pays mentionns ci-dessous:
Questo prodotto utilizzabile in tutte i paesi EU (ed in tutti gli altri paesi che seguono le direttiva 2014/53/UE) senza nessuna limitazione, eccetto per i paesii menzionati di seguito:
Das Produkt kann in allen EU Staaten ohne Einschrnkungen eingesetzt werden (sowie in anderen Staaten die der Richtlinie 2014/53/EU folgen) mit Aunahme der folgenden aufgefhrten Staaten:
In the majority of the EU and other European countries, the 2.4GHz and 5GHz bands have been made available for the use of wireless local area networks (LANs). Later in this document you will find an overview of countries in which additional restrictions or requirements or both are applicable. The requirements for any country may evolve. ZyXEL recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4GHz and 5GHz wireless LANs. The following countries have restrictions and/or requirements in addition to those given in the table labeled Overview of Regulatory Requirements for Wireless LANs:. Belgium The Belgian Institute for Postal Services and Telecommunications (BIPT) must be notified of any outdoor wireless link having a range exceeding 300 meters. Please check http://www.bipt.be for more details. Draadloze verbindingen voor buitengebruik en met een reikwijdte van meer dan 300 meter dienen aangemeld te worden bij het Belgisch Instituut voor postdiensten en telecommunicatie (BIPT). Zie http://www.bipt.be voor meer gegevens. Les liaisons sans fil pour une utilisation en extrieur dune distance suprieure 300 mtres doivent tre notifies lInstitut Belge des services Postaux et des Tlcommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples dtails. Denmark In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage. I Danmark m frekvensbndet 5150 - 5350 ogs anvendes udendrs. Italy This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a general authorization. Please check http://www.sviluppoeconomico.gov.it/ for more details. Questo prodotto conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una Autorizzazione Generale. Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. Latvia The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://
www.esd.lv for more details. NBG6815 Users Guide 199 Appendix D Legal Information 2.4 GHz frekvenu joslas izmantoanai rpus telpm nepiecieama atauja no Elektronisko sakaru direkcijas. Vairk informcijas: http://
www.esd.lv. Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 2014/53/EU has also been implemented in those countries. 2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding the gain of the antenna used(specified in dBi) to the output power available at the connector (specified in dBm). List of national codes COUNTRY Austria Belgium Bulgaria Croatia Cyprus Czech Republic Denmark Estonia Finland France Germany Greece Hungary Iceland Ireland Italy Latvia ISO 3166 2 LETTER CODE COUNTRY ISO 3166 2 LETTER CODE AT BE BG HR CY CR DK EE FI FR DE GR HU IS IE IT LV Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Poland Portugal Romania Serbia Slovakia Slovenia Spain Sweden Switzerland Turkey United Kingdom LI LT LU MT NL NO PL PT RO RS SK SI ES SE CH TR GB Safety Warnings Do not use this product near water, for example, in a wet basement or near a swimming pool. Do not expose your device to dampness, dust or corrosive liquids. Do not store things on the device. Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning. Connect ONLY suitable accessories to the device. Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information. Make sure to connect the cables to the correct ports. Place connecting cables carefully so that no one will step on them or stumble over them. Always disconnect all cables from this device before servicing or disassembling. Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to a power outlet. Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord. Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it from the device and the power source; repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one. Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning. Caution: risk of explosion if battery (on the motherboard) is replaced by an incorrect type. dispose of used batteries according to the instructions. Dispose them at the applicable collection point for the recycling of electrical and electronic device. For detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the store where you purchased the product. Do not obstruct the device ventilation slots, as insufficient airflow may harm your device. The following warning statements apply, where the disconnect device is not incorporated in the device or where the plug on the power supply cord is intended to serve as the disconnect device, For permanently connected devices, a readily accessible disconnect device shall be incorporated external to the device;
For pluggable devices, the socket-outlet shall be installed near the device and shall be easily accessible. Environment statement ErP (Energy-related Products) ZyXEL products put on the EU market in compliance with the requirement of the European Parliament and the Council published NBG6815 Users Guide 200 Appendix D Legal Information Directive 2009/125/EC establishing a framework for the setting of ecodesign requirements for energy-related products (recast), so called as "ErP Directive (Energy-related Products directive) as well as ecodesign requirement laid down in applicable implementing measures, power consumption has satisfied regulation requirements which are:
Network standby power consumption < 12W, and/or Off mode power consumption < 0.5W, and/or Standby mode power consumption < 0.5W. Wireless setting, please refer to the "Wireless" chapter for more detail. European Union - Disposal and Recycling Information The symbol below means that according to local regulations your product and/or its battery shall be disposed of separately from domestic waste. If this product is end of life, take it to a recycling station designated by local authorities. At the time of disposal, the separate collection of your product and/or its battery will help save natural resources and ensure that the environment is sustainable development. Die folgende Symbol bedeutet, dass Ihr Produkt und/oder seine Batterie gem den rtlichen Bestimmungen getrennt vom Hausmll entsorgt werden muss. Wenden Sie sich an eine Recyclingstation, wenn dieses Produkt das Ende seiner Lebensdauer erreicht hat. Zum Zeitpunkt der Entsorgung wird die getrennte Sammlung von Produkt und/oder seiner Batterie dazu beitragen, natrliche Ressourcen zu sparen und die Umwelt und die menschliche Gesundheit zu schtzen. El smbolo de abajo indica que segn las regulaciones locales, su producto y/o su batera debern depositarse como basura separada de la domstica. Cuando este producto alcance el final de su vida til, llvelo a un punto limpio. Cuando llegue el momento de desechar el producto, la recogida por separado ste y/o su batera ayudar a salvar los recursos naturales y a proteger la salud humana y medioambiental. Le symbole ci-dessous signifie que selon les rglementations locales votre produit et/ou sa batterie doivent tre limins sparment des ordures mnagres. Lorsque ce produit atteint sa fin de vie, amenez-le un centre de recyclage. Au moment de la mise au rebut, la collecte spare de votre produit et/ou de sa batterie aidera conomiser les ressources naturelles et protger l'environnement et la sant humaine. Il simbolo sotto significa che secondo i regolamenti locali il vostro prodotto e/o batteria deve essere smaltito separatamente dai rifiuti domestici. Quando questo prodotto raggiunge la fine della vita di servizio portarlo a una stazione di riciclaggio. Al momento dello smaltimento, la raccolta separata del vostro prodotto e/o della sua batteria aiuta a risparmiare risorse naturali e a proteggere l'ambiente e la salute umana. Symbolen innebr att enligt lokal lagstiftning ska produkten och/eller dess batteri kastas separat frn hushllsavfallet. Nr den hr produkten nr slutet av sin livslngd ska du ta den till en tervinningsstation. Vid tiden fr kasseringen bidrar du till en bttre milj och mnsklig hlsa genom att gra dig av med den p ett tervinningsstlle. NBG6815 Users Guide 201 Appendix D Legal Information Environmental Product Declaration NBG6815 Users Guide 202 Appendix D Legal Information
:
-
-
( : / 110V AC 230V AC)
:
Viewing Certifications Go to http://www.zyxel.com to view this products documentation and certifications. ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in material or workmanship for a specific period (the Warranty Period) from the date of purchase. The Warranty Period varies by region. Check with your vendor and/or the authorized ZyXEL local distributor for details about the Warranty Period of this product. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, ZyXEL will, at its discretion, repair or replace the defective products or components without charge for either parts or labor, and to whatever extent it shall deem necessary to restore the product or components to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal or higher value, and will be solely at the discretion of ZyXEL. This warranty shall not apply if the product has been modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. Note Repair or replacement, as provided under this warranty, is the exclusive remedy of the purchaser. This warranty is in lieu of all other warranties, express or implied, including any implied warranty of merchantability or fitness for a particular use or purpose. ZyXEL shall in no event be held liable for indirect or consequential damages of any kind to the purchaser. To obtain the services of this warranty, contact your vendor. You may also refer to the warranty policy for the region in which you bought the device at http://www.zyxel.com/web/support_warranty_info.php. Registration Register your product online to receive e-mail notices of firmware upgrades and information at www.zyxel.com. Open Source Licenses This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided with the firmware package. You can download the latest firmware at www.zyxel.com. If you cannot find it there, contact your vendor or ZyXEL Technical Support at support@zyxel.com.tw. To obtain the source code covered under those Licenses, please contact your vendor or ZyXEL Technical Support at support@zyxel.com.tw. NBG6815 Users Guide 203 Appendix D Legal Information NBG6815 Users Guide 204 APPENDIX E Customer Support In the event of problems that cannot be solved by using this manual, you should contact your vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you bought the device. See http://www.zyxel.com/homepage.shtml and also http://www.zyxel.com/about_zyxel/zyxel_worldwide.shtml for the latest information. Please have the following information ready when you contact an office. Required Information Product model and serial number. Warranty Information. Date that you received your device. Brief description of the problem and the steps you took to solve it. Corporate Headquarters (Worldwide) Taiwan ZyXEL Communications Corporation http://www.zyxel.com Asia China ZyXEL Communications (Shanghai) Corp. ZyXEL Communications (Beijing) Corp. ZyXEL Communications (Tianjin) Corp. http://www.zyxel.cn India ZyXEL Technology India Pvt Ltd http://www.zyxel.in Kazakhstan ZyXEL Kazakhstan NBG6815 Users Guide 205 Appendix E Customer Support http://www.zyxel.kz Korea ZyXEL Korea Corp. http://www.zyxel.kr Malaysia ZyXEL Malaysia Sdn Bhd. http://www.zyxel.com.my Pakistan ZyXEL Pakistan (Pvt.) Ltd. http://www.zyxel.com.pk Philippines ZyXEL Philippines http://www.zyxel.com.ph Singapore ZyXEL Singapore Pte Ltd. http://www.zyxel.com.sg Taiwan ZyXEL Communications Corporation http://www.zyxel.com/tw/zh/
Thailand ZyXEL Thailand Co., Ltd http://www.zyxel.co.th Vietnam ZyXEL Communications Corporation-Vietnam Office http://www.zyxel.com/vn/vi Europe Austria ZyXEL Deutschland GmbH http://www.zyxel.de NBG6815 Users Guide 206 Appendix E Customer Support Belarus ZyXEL BY http://www.zyxel.by Belgium ZyXEL Communications B.V. http://www.zyxel.com/be/nl/
http://www.zyxel.com/be/fr/
Bulgaria ZyXEL http://www.zyxel.com/bg/bg/
Czech Republic ZyXEL Communications Czech s.r.o http://www.zyxel.cz Denmark ZyXEL Communications A/S http://www.zyxel.dk Estonia ZyXEL Estonia http://www.zyxel.com/ee/et/
Finland ZyXEL Communications http://www.zyxel.fi France ZyXEL France http://www.zyxel.fr Germany ZyXEL Deutschland GmbH http://www.zyxel.de Hungary ZyXEL Hungary & SEE http://www.zyxel.hu NBG6815 Users Guide 207 Appendix E Customer Support Italy ZyXEL Communications Italy http://www.zyxel.it/
Latvia ZyXEL Latvia http://www.zyxel.com/lv/lv/homepage.shtml Lithuania ZyXEL Lithuania http://www.zyxel.com/lt/lt/homepage.shtml Netherlands ZyXEL Benelux http://www.zyxel.nl Norway ZyXEL Communications http://www.zyxel.no Poland ZyXEL Communications Poland http://www.zyxel.pl Romania ZyXEL Romania http://www.zyxel.com/ro/ro Russia ZyXEL Russia http://www.zyxel.ru Slovakia ZyXEL Communications Czech s.r.o. organizacna zlozka http://www.zyxel.sk Spain ZyXEL Communications ES Ltd http://www.zyxel.es Sweden ZyXEL Communications NBG6815 Users Guide 208 Appendix E Customer Support http://www.zyxel.se Switzerland Studerus AG http://www.zyxel.ch/
Turkey ZyXEL Turkey A.S. http://www.zyxel.com.tr UK ZyXEL Communications UK Ltd. http://www.zyxel.co.uk Ukraine ZyXEL Ukraine http://www.ua.zyxel.com Latin America Argentina ZyXEL Communication Corporation http://www.zyxel.com/ec/es/
Brazil ZyXEL Communications Brasil Ltda. https://www.zyxel.com/br/pt/
Ecuador ZyXEL Communication Corporation http://www.zyxel.com/ec/es/
Middle East Israel ZyXEL Communication Corporation http://il.zyxel.com/homepage.shtml Middle East ZyXEL Communication Corporation NBG6815 Users Guide 209 Appendix E Customer Support http://www.zyxel.com/me/en/
North America USA ZyXEL Communications, Inc. - North America Headquarters http://www.zyxel.com/us/en/
Oceania Africa Australia ZyXEL Communications Corporation http://www.zyxel.com/au/en/
South Africa Nology (Pty) Ltd. http://www.zyxel.co.za NBG6815 Users Guide 210 A Address Assignment 68 AP 10 AP Mode menu 45 status screen 43 AP+Bridge 10 B Bridge/Repeater 10 C certifications viewing 203 Channel 37, 44 channel 85 CIFS 109 Common Internet File System, see CIFS Configuration restore 143, 146, 148 contact information 205 content filtering by keyword (in URL) 108 copyright 197 CPU usage 37, 44 customer support 205 D Daylight saving 141 DDNS service providers 135 DHCP 59 Index Index see also Dynamic Host Configuration Protocol DHCP server 59, 104 Digital Living Network Alliance 109 disclaimer 197 DLNA 109, 119 indexing 120 overview 119 rescan 120 DLNA-compliant client 109 DNS Server 68 documentation related 2 Domain Name System. See DNS. duplex setting 37, 45 Dynamic Host Configuration Protocol 59 DynDNS 135 DynDNS see also DDNS 135 E encryption 86 and local (user) database 87 key 87 WPA compatible 87 ESSID 156 F FCC interference statement 197 file sharing 122 access right 123, 125 bandwidth 125 example 125 FTP 124, 129 overview 122 Samba 122 user account 123, 124 Windows Explorer 122 NBG6815 Users Guide 211 work group 122 Firewall guidelines 133 ICMP packets 135 firewall stateful inspection 132 Firmware upload 142 file extension using HTTP firmware version 36, 44 G General wireless LAN screen 89 Guest WLAN 87 Guest WLAN Bandwidth 88 Guide Quick Start 2 I IGMP 69 see also Internet Group Multicast Protocol version IGMP version 69 Internet Group Multicast Protocol 69 IP Address 104 L LAN 103 LAN overview 103 LAN setup 103 Language 144 Link type 37, 44 local (user) database 86 and encryption 87 Local Area Network 103 Index M MAC 97 MAC address 68, 85 cloning 68 MAC address filter 85 MAC address filtering 97 MAC filter 97 managing the device good habits 11 using the web configurator. See web configurator. using the WPS. See WPS. MBSSID 10 Media access control 97 media client 119 media file 119, 120 type 120 media server overview 119 meida file play 119 Memory usage 37, 44 mode 10 Multicast 69 IGMP 69 N NAT Traversal 131 Navigation Panel 38, 45 navigation panel 38, 45 O operating mode 10 other documentation 2 P Point-to-Point Protocol over Ethernet 75 port speed 37, 45 PPPoE 75 NBG6815 Users Guide 212 dial-up connection product registration 203 Q Quality of Service (QoS) 99 Quick Start Guide 2 R RADIUS server 86 registration product 203 related documentation 2 Reset button 11 Reset the device 11 Restore configuration 143, 146, 148 Roaming 98 Router Mode status screen 35 RTS/CTS Threshold 85, 98 S Samba 109 Scheduling 101 Server Message Block, see SMB Service Set 90, 96 Service Set IDentification 90, 96 Service Set IDentity. See SSID. SMB 109 SSID 37, 44, 85, 90, 96 stateful inspection firewall 132 Static DHCP 62 Status 35 StreamBoost bandwidth 116 device priority 118 example 116 Subnet Mask 104 System General Setup 138 Index System restart 144 T TCP/IP configuration 59 Time setting 140 trademarks 197 U Universal Plug and Play 121 Application 131 Security issues 131 UPnP 121 user authentication 86 local (user) database 86 RADIUS server 86 W WAN (Wide Area Network) 67 WAN MAC address 68 warranty 203 note 203 Web Configurator how to access 14 Overview 14 web configurator 10 WEP Encryption 92 windows media player 119 wireless channel 156 wireless LAN 156 wireless LAN scheduling 101 Wireless network basic guidelines 85 channel 85 encryption 86 example 84 MAC address filter 85 overview 84 security 85 SSID 85 NBG6815 Users Guide 213 Index Wireless security 85 overview 85 type 85 wireless security 156 Wireless tutorial 48 Wizard setup 17 WLAN button 11 work group 109 name 109 Windows 109 WPA compatible 87 WPS 10 NBG6815 Users Guide 214
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-08-17 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2015-11-30 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
3 | 5745 ~ 5825 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 | Effective |
2016-08-17
|
||||
1 2 3 |
2015-11-30
|
|||||
1 2 3 | Applicant's complete, legal business name |
ZyXEL Communications Corporation
|
||||
1 2 3 | FCC Registration Number (FRN) |
0021059092
|
||||
1 2 3 | Physical Address |
No.2, Industry East Road IX, Science Park
|
||||
1 2 3 |
Hsinchu, N/A
|
|||||
1 2 3 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 3 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 | Grantee Code |
I88
|
||||
1 2 3 | Equipment Product Code |
NBG6815
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 | Name |
E******** B****
|
||||
1 2 3 | Title |
Section Manager
|
||||
1 2 3 | Telephone Number |
886 3******** Extension:
|
||||
1 2 3 | Fax Number |
886 3********
|
||||
1 2 3 |
E******@zyxel.com.tw
|
|||||
app s | Technical Contact | |||||
1 2 3 | Firm Name |
International Certification Corp.
|
||||
1 2 3 | Name |
G****** C******
|
||||
1 2 3 | Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
||||
1 2 3 |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3********
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
G******@icertifi.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 2 3 | Firm Name |
International Certification Corp.
|
||||
1 2 3 | Name |
W******** L******
|
||||
1 2 3 | Physical Address |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan Hsiang
|
||||
1 2 3 |
No.3-1, Lane 6, Wen San 3rd St. Kwei Shan
|
|||||
1 2 3 |
Taiwan
|
|||||
1 2 3 | Telephone Number |
886-3********
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
w******@icertifi.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 3 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 | Yes | |||||
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/29/2016 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 | DTS - Digital Transmission System | |||||
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Simultaneous Dual-Band Wireless AC2200 Gigabit Ethernet Gateway | ||||
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 | Modular Equipment Type | Does not apply | ||||
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 | Original Equipment | |||||
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 | Grant Comments | Class II Permissive Change : This Change is according to KDB 926956 D01 U-NII Transition Plan v01r06. The minimum test requirements for Class II permissive change is according Answer of Question 16 section c)4)i) requirements. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz. Operations in 5150-5250 MHz band is for indoor use only. | ||||
1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz. Operations in 5150-5250 MHz band is for indoor use only. | |||||
1 2 3 | Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz. | |||||
1 2 3 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 | Firm Name |
International Certification Corp.
|
||||
1 2 3 | Name |
J**** C****
|
||||
1 2 3 |
F****** C****
|
|||||
1 2 3 | Telephone Number |
886-3******** Extension:
|
||||
1 2 3 | Fax Number |
886-3********
|
||||
1 2 3 |
J******@icertifi.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 38 CC MO | 5180 | 5240 | 0.975 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 38 49 CC MO | 5745 | 5825 | 0.643 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 39 CC MO | 5180.00000000 | 5240.00000000 | 0.9750000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC MO | 2412 | 2462 | 0.982 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15C | CC MO | 5745 | 5825 | 0.643 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC