app
s
|
Applicant Information
|
|
1 2 3 4 5 6
|
Effective |
2019-05-28
|
1 2 3 4 5 6
|
2018-10-23
|
1 2 3 4 5 6
|
2018-08-31
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Cisco Systems Inc
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0004968939
|
1 2 3 4 5 6
|
Physical Address |
125 West Tasman Drive
|
1 2 3 4 5 6
|
San Jose, California 95134-1706
|
1 2 3 4 5 6
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6
|
TCB Application Email Address |
t******@siemic.com
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6
|
Grantee Code |
LDK
|
1 2 3 4 5 6
|
Equipment Product Code |
C11011757
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6
|
Name |
G**** T******
|
1 2 3 4 5 6
|
Title |
Manager, Engineering
|
1 2 3 4 5 6
|
Telephone Number |
408-5********
|
1 2 3 4 5 6
|
Fax Number |
408-5********
|
1 2 3 4 5 6
|
E-mail |
g******@cisco.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/11/2019 |
1 2 3 4 5 6 | 04/21/2019 |
1 2 3 4 5 6 | 02/27/2019 |
1 2 3 4 5 6 | 01/12/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 | Equipment Class | DTS - Digital Transmission System |
1 2 3 4 5 6 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Cisco 802.11a/g/n/ac Radio Module |
1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 6 | No |
1 2 3 4 5 6 | Modular Equipment Type | Limited Single Modular Approval |
1 2 3 4 5 6 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 6 | Original Equipment |
1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 | Grant Comments | C2PC to add host model: C1121X-8PLTEPWB
Original grant comment:
Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
1 2 3 4 5 6 | C2PC to add host model: C1121X-8PLTEPWB
Original grant comment:
Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC
module is not intended for OEM integrators and/or end-users. This grant is valid only when
the module is installed in the end-product covered in this filing. Output power listed is the
maximum combined conducted output power. Operations in the 5.15-5.25GHz band are
restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing.
This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports
beamforming mode. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter within a device, except in accordance with
accepted multi-transmitter product procedures. |
1 2 3 4 5 6 | C2PC to add host model: C1109-4PLTE2PWB
Original grant comment:
Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. This device has 20MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
1 2 3 4 5 6 | C2PC to add host model: C1109-4PLTE2PWB
Original grant comment:
Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC
module is not intended for OEM integrators and/or end-users. This grant is valid only when
the module is installed in the end-product covered in this filing. Output power listed is the
maximum combined conducted output power. Operations in the 5.15-5.25GHz band are
restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing.
This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports
beamforming mode. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter within a device, except in accordance with
accepted multi-transmitter product procedures. |
1 2 3 4 5 6 | Limited Modular Approval intended for use only in Cisco platforms. This grant is valid only when the module is installed in the end-product covered in this filing. The ISR-AP1101AC is not intended for OEM integrators and/or end-users. Output power listed is the maximum combined conducted output power. Device is a 2x2 MIMO configuration as described in this filing. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
1 2 3 4 5 6 | Limited Modular Approval intended for use only in Cisco platforms. The ISR-AP1101AC module is not intended for OEM integrators and/or end-users. This grant is valid only when the module is installed in the end-product covered in this filing. Output power listed is the maximum combined conducted output power. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is a 2x2 MIMO configuration as described in this filing. This device has a 20 MHz, 40 MHz, and 80 MHz bandwidth mode. Device supports beamforming mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device, except in accordance with accepted multi-transmitter product procedures. |
1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6
|
Firm Name |
Cisco Systems, Inc.
|
1 2 3 4 5 6
|
Bureau Veritas Consumer Products Services, Inc.
|
1 2 3 4 5 6
|
Name |
G****** T****
|
1 2 3 4 5 6
|
L******** B******
|
1 2 3 4 5 6
|
Telephone Number |
408-5********
|
1 2 3 4 5 6
|
408-5********
|
1 2 3 4 5 6
|
Fax Number |
40852********
|
1 2 3 4 5 6
|
408 5********
|
1 2 3 4 5 6
|
E-mail |
g******@cisco.com
|
1 2 3 4 5 6
|
l******@siemic.com
|
|