app
s
|
Applicant Information
|
|
various
|
Effective |
2019-09-06
|
various
|
2019-02-15
|
various
|
2016-07-18
|
various
|
2016-07-14
|
various
|
2016-05-25
|
various
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
various
|
FCC Registration Number (FRN) |
0005821988
|
various
|
Physical Address |
4F, No. 150, Li-Te Rd.
|
various
|
Peitou, Taipei
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
s******@nemko.com
|
various
|
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
MSQ
|
various
|
Equipment Product Code |
7265D2
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J**** Y******
|
various
|
Title |
Associate Vice President
|
various
|
Telephone Number |
+886-********
|
various
|
Fax Number |
+886-********
|
various
|
E-mail |
j******@asus.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
various
|
QuieTek Corporation
|
various
|
Name |
A**** L****
|
various
|
M**** C******
|
various
|
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
No. 5-22, Rueishu Keng, Linkou Dist.
|
various
|
No. 5-22, Ruishukeng, Linkou Dist.
|
various
|
New Taipei City
|
various
|
New Taipei City, 24451
|
various
|
Taiwan
|
various
|
Telephone Number |
886-2********
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
E-mail |
a******@dekra.com
|
various
|
m******@quietek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Network Adapter |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Change in Identification |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX:1.55W/kg.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Model: C433T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.94 W/kg and 1.58 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.55W/kg.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Model: C433T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.17 W/kg and 1.31 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg.
Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Model: C433T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.14 W/kg and 1.59 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not
be co-located with any other transmitters, except in accordance with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested
with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met
installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application.
Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and
80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements
for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS C434T with antenna ACON, part no. AML6Y-200005, 1415-0715000 and LUXSHARE, part no. LA9RF152-CS-H, 1415-0716000.
The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.25W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter
must not be co-located with any other transmitters except in accordance with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. End users and installers must be provided with
transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS C434T with antenna ACON, part no. AML6Y-200005, 1415-0715000 and LUXSHARE, part no. LA9RF152-CS-H, 1415-0716000.
The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.39W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not
be co-located with any other transmitters, except in accordance with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested
with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure
RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met
installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application.
Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz
and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must beprovided
with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements
for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS C434T with antenna ACON, part no. AML6Y-200005, 1415-0715000 and LUXSHARE, part no. LA9RF152-CS-H, 1415-0716000.
The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.39W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS T303U, with antenna ACON, part no. APP6Y-100029, APF6Y-100016, 14008-01920100, 14008-01920000 and INPAQ, part no. WA-F-LB-02-371, WA-F-LB-01-037, 14008-01920300, 14008-01920200.
The highest measured body SAR values are: 1.07 W/kg. Simultaneous TX: 1.42 W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth
operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS T303U, with antenna ACON, part no. APP6Y-100029, APF6Y-100016, 14008-01920100, 14008-01920000 and INPAQ, part no. WA-F-LB-02-371, WA-F-LB-01-037, 14008-01920300, 14008-01920200.
The highest measured body SAR values are: 1.19 W/kg. Simultaneous TX: 1.54 W/kg. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this
transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS T303U, with antenna ACON, part no. APP6Y-100029, APF6Y-100016, 14008-01920100, 14008-01920000 and INPAQ, part no. WA-F-LB-02-371, WA-F-LB-01-037, 14008-01920300, 14008-01920200.
Simultaneous TX: 1.54 W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg.
Class II Permissive Change to reduce WLAN output power by firmware. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must beprovided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX: 1.55W/kg.
Class II Permissive Change to reduce output power by firmware and to ensure compliance to the new U-NII rules as modified by MO&O FCC 16-24. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: <0.10 W/kg. Simultaneous TX: 1.55W/kg.
Class II Permissive Change to reduce WLAN output power by firmware. |
various | Power Output listed is conducted. Modular Approval filing, the antenna(s) used for this
transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.55W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
device must not be co-located with any other transmitters, except in accordance with
FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrators to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations
as described in this filing. OEM/Host integrators must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The
highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
device must not be co-located with any other transmitters, except in accordance with
FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrators to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter is restricted to indoor
use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz
bandwidth operations as described in this filing. OEM/Host integrators must be provided
with antenna installation instructions and transmitter operating conditions to satisfy RF
exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host
product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX:1.55W/kg. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
S**** H********
|
various
|
V****** L****
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
88628******** Extension:
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
88628********
|
various
|
886-2********
|
various
|
E-mail |
s******@dekra.com
|
various
|
v******@dekra.com
|
various
|
s******@quietek.com
|
|