FCC ID: MSQ7265D2 Wireless Network Adapter

by: ASUSTeK Computer Inc latest update: 2019-09-06 model: 7265D2

Sixteen grants have been issued under this FCC ID from 05/25/2016 to 09/06/2019 (this is one of one hundred and sixty-five releases in 2019 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, drivers, troubleshooting guides, instructions, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various (7265NGW) UserMan Users Manual pdf 5.57 MiB July 18 2016
various 7265D2W- UserMan Part 1 Users Manual pdf 4.75 MiB
various 7265D2W- UserMan Part 2 Users Manual pdf 2.60 MiB
various Information Guide Users Manual pdf 319.38 KiB July 14 2016
various User Manual Users Manual pdf 838.75 KiB June 09 2019
various (7265NGW) Inpho SAR Internal Photos pdf 3.87 MiB July 18 2016
various 7265D2W- Inpho SAR Internal Photos pdf 3.41 MiB
various Internal Photos-1 Internal Photos pdf 4.56 MiB June 09 2019
various Internal Photos-2 Internal Photos pdf 5.15 MiB June 09 2019
various (7265D2W) Expho External Photos pdf 174.07 KiB May 25 2016
various (7265NGW) Expho SAR External Photos pdf 505.27 KiB July 18 2016
various 7265D2W- Expho-SAR External Photos pdf 1.16 MiB
various External Photos External Photos pdf 881.81 KiB June 09 2019
various (7265D2W) LabelLoc ID Label/Location Info pdf 129.96 KiB May 25 2016
various (7265D2W) LabelSmpl ID Label/Location Info pdf 67.09 KiB May 25 2016
various (7265NGW) LabelLoc ID Label/Location Info pdf 33.42 KiB July 18 2016
various (7265NGW) Labelsmpl ID Label/Location Info pdf 146.45 KiB July 18 2016
various 7265D2W- LabelLoc ID Label/Location Info pdf 95.99 KiB
various 7265D2W- Labelsmpl ID Label/Location Info pdf 50.89 KiB
various ID Label ID Label/Location Info pdf 32.42 KiB June 09 2019
various ID Label Location ID Label/Location Info pdf 121.86 KiB June 09 2019
various C2PC Request Letter Cover Letter(s) pdf 108.94 KiB June 09 2019
various Declaration Letter Cover Letter(s) pdf 125.69 KiB June 09 2019
various Power of Attorney Letter Cover Letter(s) pdf 120.13 KiB June 09 2019
various Test Report pdf June 09 2019
various Test Setup Photos pdf June 09 2019
various RF Exposure Info pdf June 09 2019
various 7265D2W- ATTESTATION 20190212 Cover Letter(s) pdf 15.21 KiB
various 7265D2W- Class II Change 20190212 Cover Letter(s) pdf 20.34 KiB
various 7265D2W- Confidentiality Request 20190212 Cover Letter(s) pdf 32.73 KiB
various 7265D2W- Declaration of authorization 20190212 Cover Letter(s) pdf 18.55 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various 7265D2W- UNII Declaration letter 20190212 Cover Letter(s) pdf 35.63 KiB
various Confidential 7265D2W- BlkDia Block Diagram pdf February 14 2019 confidential
various Confidential 7265D2W- OPDes 20190212 Operational Description pdf February 14 2019 confidential
various Confidential 7265D2W- Schem 20190212 Schematics pdf February 14 2019 confidential
various (7265D2W) Class II Change 2016-07-15 Cover Letter(s) pdf 168.44 KiB July 18 2016
various RF Exposure Info pdf July 18 2016
various (7265NGW) ACB-Form-FCC-Application-Letters Cover Letter(s) pdf 595.18 KiB July 18 2016
various (7265NGW) ATTESTATION Cover Letter(s) pdf 14.56 KiB July 18 2016
various (7265NGW) Declaration of authorization Cover Letter(s) pdf 31.58 KiB July 18 2016
various (7265NGW) Doc Letter Cover Letter(s) pdf 211.40 KiB July 18 2016
various Test Setup Photos pdf July 18 2016
various Confidential (7265NGW) BlkDia Block Diagram pdf July 18 2016 confidential
various Confidential (7265NGW) OPDes Operational Description pdf July 18 2016 confidential
various Confidential (7265NGW) Schem Schematics pdf July 18 2016 confidential
various C2PC Cover Letter Cover Letter(s) pdf 17.31 KiB July 14 2016
various Cover Letter(s) pdf July 14 2016
various (7265D2W) ACB-Form-FCC-Application-Letters Cover Letter(s) pdf 23.19 KiB May 25 2016
various (7265D2W) ATTESTATION Cover Letter(s) pdf 15.14 KiB May 25 2016
various (7265D2W) Authorization Letter Cover Letter(s) pdf 82.54 KiB May 25 2016
various (7265D2W) Declaration letter for electrically identical Cover Letter(s) pdf 21.06 KiB May 25 2016
various (7265D2W) FCC Auth Ltr Change of ID Cover Letter(s) pdf 124.73 KiB May 25 2016
various (7265D2W) RF 160 03, Declaration of authorization Cover Letter(s) pdf 17.04 KiB May 25 2016
various (7265NGW) UserMan Users Manual pdf 5.57 MiB July 18 2016
various 7265D2W- UserMan Part 1 Users Manual pdf 4.75 MiB
various 7265D2W- UserMan Part 2 Users Manual pdf 2.60 MiB
various Information Guide Users Manual pdf 319.38 KiB July 14 2016
various User Manual Users Manual pdf 838.75 KiB June 09 2019
various (7265NGW) Inpho SAR Internal Photos pdf 3.87 MiB July 18 2016
various 7265D2W- Inpho SAR Internal Photos pdf 3.41 MiB
various Internal Photos-1 Internal Photos pdf 4.56 MiB June 09 2019
various Internal Photos-2 Internal Photos pdf 5.15 MiB June 09 2019
various (7265D2W) Expho External Photos pdf 174.07 KiB May 25 2016
various (7265NGW) Expho SAR External Photos pdf 505.27 KiB July 18 2016
various 7265D2W- Expho-SAR External Photos pdf 1.16 MiB
various External Photos External Photos pdf 881.81 KiB June 09 2019
various (7265D2W) LabelLoc ID Label/Location Info pdf 129.96 KiB May 25 2016
various (7265D2W) LabelSmpl ID Label/Location Info pdf 67.09 KiB May 25 2016
various (7265NGW) LabelLoc ID Label/Location Info pdf 33.42 KiB July 18 2016
various (7265NGW) Labelsmpl ID Label/Location Info pdf 146.45 KiB July 18 2016
various 7265D2W- LabelLoc ID Label/Location Info pdf 95.99 KiB
various 7265D2W- Labelsmpl ID Label/Location Info pdf 50.89 KiB
various ID Label ID Label/Location Info pdf 32.42 KiB June 09 2019
various ID Label Location ID Label/Location Info pdf 121.86 KiB June 09 2019
various C2PC Request Letter Cover Letter(s) pdf 108.94 KiB June 09 2019
various Declaration Letter Cover Letter(s) pdf 125.69 KiB June 09 2019
various Power of Attorney Letter Cover Letter(s) pdf 120.13 KiB June 09 2019
various 7265D2W- ATTESTATION 20190212 Cover Letter(s) pdf 15.21 KiB
various 7265D2W- Class II Change 20190212 Cover Letter(s) pdf 20.34 KiB
various 7265D2W- Confidentiality Request 20190212 Cover Letter(s) pdf 32.73 KiB
various 7265D2W- Declaration of authorization 20190212 Cover Letter(s) pdf 18.55 KiB
various 7265D2W- UNII Declaration letter 20190212 Cover Letter(s) pdf 35.63 KiB
various (7265D2W) Class II Change 2016-07-15 Cover Letter(s) pdf 168.44 KiB July 18 2016
various (7265NGW) ACB-Form-FCC-Application-Letters Cover Letter(s) pdf 595.18 KiB July 18 2016
various (7265NGW) ATTESTATION Cover Letter(s) pdf 14.56 KiB July 18 2016
various (7265NGW) Declaration of authorization Cover Letter(s) pdf 31.58 KiB July 18 2016
various (7265NGW) Doc Letter Cover Letter(s) pdf 211.40 KiB July 18 2016
various C2PC Cover Letter Cover Letter(s) pdf 17.31 KiB July 14 2016
various (7265D2W) ACB-Form-FCC-Application-Letters Cover Letter(s) pdf 23.19 KiB May 25 2016
various (7265D2W) ATTESTATION Cover Letter(s) pdf 15.14 KiB May 25 2016
various (7265D2W) Authorization Letter Cover Letter(s) pdf 82.54 KiB May 25 2016
various (7265D2W) Declaration letter for electrically identical Cover Letter(s) pdf 21.06 KiB May 25 2016
various (7265D2W) FCC Auth Ltr Change of ID Cover Letter(s) pdf 124.73 KiB May 25 2016
various (7265D2W) RF 160 03, Declaration of authorization Cover Letter(s) pdf 17.04 KiB May 25 2016

frequency equipment class purpose
1 2019-09-06 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 2422 ~ 2452 DTS - Digital Transmission System
4 2019-02-15 2422 ~ 2462 DTS - Digital Transmission System
5 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
6 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
7 2016-07-18 2422 ~ 2462 DTS - Digital Transmission System
8 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
9 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 2016-07-14 2422 ~ 2462 DTS - Digital Transmission System
11 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2016-05-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Change in Identification
14 JBP - Part 15 Class B Computing Device Peripheral
15 2422 ~ 2462 DTS - Digital Transmission System
16 5755 ~ 5795 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2019-09-06
various 2019-02-15
various 2016-07-18
various 2016-07-14
various 2016-05-25
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 4F, No. 150, Li-Te Rd.
various Peitou, Taipei
various Taiwan
app s TCB Information
various TCB Application Email Address s******@nemko.com
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code 7265D2
app s Person at the applicant's address to receive grant or for contact
various Name J******** Y******
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various QuieTek Corporation
various Name A**** L********
various M**** C****
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No. 5-22, Rueishu Keng, Linkou Dist.
various No. 5-22, Ruishukeng, Linkou Dist.
various New Taipei City
various New Taipei City, 24451
various Taiwan
various Telephone Number 886-2********
various 886-2******** Extension:
various Fax Number 886-2********
various E-mail a******@dekra.com
various m******@quietek.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
variousYes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassNII - Unlicensed National Information Infrastructure TX
variousDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Wireless Network Adapter
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeLimited Single Modular Approval
variousSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX:1.55W/kg. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Model: C433T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.94 W/kg and 1.58 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.55W/kg. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Model: C433T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.17 W/kg and 1.31 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg. Class II Permissive Change: Limited Single Modular Approval, address RF Exposure in the host of ASUS Notebook Computer, Model: C433T, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 1.14 W/kg and 1.59 W/kg, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C434T with antenna ACON, part no. AML6Y-200005, 1415-0715000 and LUXSHARE, part no. LA9RF152-CS-H, 1415-0716000. The highest reported Body and Simultaneous SAR values are 1.09W/kg and 1.25W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C434T with antenna ACON, part no. AML6Y-200005, 1415-0715000 and LUXSHARE, part no. LA9RF152-CS-H, 1415-0716000. The highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.39W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must beprovided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C434T with antenna ACON, part no. AML6Y-200005, 1415-0715000 and LUXSHARE, part no. LA9RF152-CS-H, 1415-0716000. The highest reported Body and Simultaneous SAR values are 1.14W/kg and 1.39W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS T303U, with antenna ACON, part no. APP6Y-100029, APF6Y-100016, 14008-01920100, 14008-01920000 and INPAQ, part no. WA-F-LB-02-371, WA-F-LB-01-037, 14008-01920300, 14008-01920200. The highest measured body SAR values are: 1.07 W/kg. Simultaneous TX: 1.42 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS T303U, with antenna ACON, part no. APP6Y-100029, APF6Y-100016, 14008-01920100, 14008-01920000 and INPAQ, part no. WA-F-LB-02-371, WA-F-LB-01-037, 14008-01920300, 14008-01920200. The highest measured body SAR values are: 1.19 W/kg. Simultaneous TX: 1.54 W/kg.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host tablet PC, model number: ASUS T303U, with antenna ACON, part no. APP6Y-100029, APF6Y-100016, 14008-01920100, 14008-01920000 and INPAQ, part no. WA-F-LB-02-371, WA-F-LB-01-037, 14008-01920300, 14008-01920200. Simultaneous TX: 1.54 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg. Class II Permissive Change to reduce WLAN output power by firmware.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must beprovided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX: 1.55W/kg. Class II Permissive Change to reduce output power by firmware and to ensure compliance to the new U-NII rules as modified by MO&O FCC 16-24.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: <0.10 W/kg. Simultaneous TX: 1.55W/kg. Class II Permissive Change to reduce WLAN output power by firmware.
variousPower Output listed is conducted. Modular Approval filing, the antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest measured body SAR values are: 0.01 W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.56 W/kg. Simultaneous TX: 1.55W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter is restricted to indoor use only within the 5.15-5.25GHz and 5.47-5.725GHz bands. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band and has 20MHz, 40MHz and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest measured body SAR values are: 0.77W/kg. Simultaneous TX:1.55W/kg.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various DEKRA Testing and Certification Co., Ltd.
various Name S****** H********
various V****** L****
various Telephone Number +886-******** Extension:
various 88628******** Extension:
various 886-2******** Extension:
various Fax Number +886-********
various 88628********
various 886-2********
various E-mail s******@dekra.com
various v******@dekra.com
various s******@quietek.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15E CC MO 5180 5240 0.046
1 2 15E CC MO 5190 5230 0.081
1 3 15E 38 CC MO ND 5260 5320 0.093
1 4 15E 38 CC MO ND 5270 5310 0.098
1 5 15E 38 CC MO ND 5500 5720 0.096
1 6 15E 38 CC MO ND 5530 5690 0.105
1 7 15E 38 CC MO 5745 5825 0.1
1 8 15E 38 CC MO 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0032000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.0032
3 2 15C CC MO 2412 2462 0.192
3 3 15C CC MO 2422 2452 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.0032
4 2 15C CC MO 2412 2462 0.192
4 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402.00000000 2480.00000000 0.0032000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC MO 5180 5240 0.046
6 2 15E CC MO 5190 5230 0.081
6 3 15E CC MO ND 5260 5320 0.093
6 4 15E CC MO ND 5270 5310 0.098
6 5 15E CC MO ND 5500 5720 0.096
6 6 15E CC MO ND 5530 5690 0.105
6 7 15E CC MO 5745 5825 0.1
6 8 15E CC MO 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.0032
7 2 15C CC MO 2412 2462 0.192
7 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E 38 CC MO 5180 5240 0.046
8 2 15E 38 CC MO 5190 5230 0.081
8 3 15E 38 CC MO ND 5260 5320 0.093
8 4 15E 38 CC MO ND 5270 5310 0.098
8 5 15E 38 CC MO ND 5500 5720 0.096
8 6 15E 38 CC MO ND 5530 5690 0.105
8 7 15E 38 CC MO 5745 5825 0.1
8 8 15E 38 CC MO 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0032000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.0032
10 2 15C CC MO 2412 2462 0.192
10 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E 38 CC MO 5180 5240 0.046
11 2 15E 38 CC MO 5190 5230 0.081
11 3 15E 38 CC MO ND 5260 5320 0.093
11 4 15E 38 CC MO ND 5270 5310 0.098
11 5 15E 38 CC MO ND 5500 5720 0.096
11 6 15E 38 CC MO ND 5530 5690 0.105
11 7 15E 38 CC MO 5745 5825 0.1
11 8 15E 38 CC MO 5755 5795 0.101
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0032000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0032000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15B CC
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.0032
15 2 15C CC MO 2412 2462 0.192
15 3 15C CC MO 2422 2462 0.152
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5180 5240 0.046
16 2 15E CC MO 5190 5230 0.081
16 3 15E 38 CC MO ND 5260 5320 0.093
16 4 15E 38 CC MO ND 5270 5310 0.098
16 5 15E 38 CC MO ND 5500 5720 0.096
16 6 15E 38 CC MO ND 5530 5690 0.105
16 7 15E 38 CC MO ND 5745 5825 0.1
16 8 15E 38 CC MO ND 5755 5795 0.101

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC