app
s
|
Applicant Information
|
|
various
|
Effective |
2019-07-22
|
various
|
2019-03-22
|
various
|
2018-03-16
|
various
|
2017-12-25
|
various
|
2017-10-24
|
various
|
2017-08-25
|
various
|
2017-08-10
|
various
|
2017-04-17
|
various
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
various
|
FCC Registration Number (FRN) |
0005821988
|
various
|
Physical Address |
4F, No. 150, Li-Te Rd.
|
various
|
Peitou, Taipei, N/A 112
|
various
|
Peitou, Taipei, 112
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
MSQ
|
various
|
Equipment Product Code |
8265D2
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J**** Y****
|
various
|
Title |
Associate Vice President
|
various
|
Telephone Number |
+886-********
|
various
|
Fax Number |
+886-********
|
various
|
E-mail |
j******@asus.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
DEKRA Testing and Certification Co., Ltd
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
BTL Inc.
|
various
|
Name |
A****** L********
|
various
|
V****** W********
|
various
|
S******** L********
|
various
|
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
B1, No. 37, Lane 365, YangGuang St., NeiHu Distric
|
various
|
No. 5-22, Rueishu Keng, Linkou Dist.
|
various
|
New Taipei City
|
various
|
Taipei
|
various
|
New Taipei City, 24451
|
various
|
24451
|
various
|
Taiwan
|
various
|
Telephone Number |
886-2********
|
various
|
886-2********
|
various
|
88628******** Extension:
|
various
|
88628********
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
886-2********
|
various
|
88628********
|
various
|
E-mail |
a******@dekra.com
|
various
|
v******@dekra.com
|
various
|
s******@newbtl.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 8265 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Change in identification of presently authorized equipment. Original FCC ID: PD98265D2 Grant Date: 06/28/2016 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided
with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UM433D with antenna LUXSHARE ICT, part no. LA9RF213-CS-H, 14008-03590300 and Hong-Bo, part no. 260-26238, 14008-03590200.
The highest reported Body and Simultaneous SAR values are 0.29W/kg and 1.28W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4
GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as
described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host
product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UM433D with antenna LUXSHARE ICT, part no. LA9RF213-CS-H, 14008-03590300 and Hong-Bo, part no. 260-26238, 14008-03590200.
The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.28W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or
a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz,
40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided
with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UM433D with antenna LUXSHARE ICT, part no. LA9RF213-CS-H, 14008-03590300 and Hong-Bo, part no. 260-26238, 14008-03590200.
The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.26W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser
gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous transmission
SAR requirements according to published KDB 616217 supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or
a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz,
40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided
with antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for
each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX462D and Q406D with antenna YAGEO, part no. ANTA0AA13091WLAN1, ANTA0AA13091WLAN2, 14008-03380200, 14008-03380300 and ACON, part no. ANF6Y-100058, ANF6Y-100059, 14008-03380000, 14008-03380100.
The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.32W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4
GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as
described in this filing. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host
product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX462D and Q406D with antenna YAGEO, part no. ANTA0AA13091WLAN1, ANTA0AA13091WLAN2, 14008-03380200, 14008-03380300 and ACON, part no. ANF6Y-100058, ANF6Y-100059, 14008-03380000, 14008-03380100.
The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.13W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided
with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX462D and Q406D with antenna YAGEO, part no. ANTA0AA13091WLAN1, ANTA0AA13091WLAN2, 14008-03380200, 14008-03380300 and ACON, part no. ANF6Y-100058, ANF6Y-100059, 14008-03380000, 14008-03380100.
The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.32W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively.
Class II Permissive Change with decreasing the WLAN Output Power through firmware and requesting the approval for portable category specific host Notebook PC, model numbers: UX391U, ZenBookX and BX391U. Also with the antennas Hong-Lin (Hong- Bo), part no. 260-26194 (14008-02920100) and INPAQ, part no. MDA-LBLB-04-004 (14008-02920000), as documented in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively.
Class II Permissive Change with decreasing the WLAN Output Power through firmware and requesting the approval for portable category specific host Notebook PC, model numbers: UX391U, ZenBookX and BX391U. Also with the antennas Hong-Lin (Hong- Bo), part no. 260-26194 (14008-02920100) and INPAQ, part no. MDA-LBLB-04-004 (14008-02920000), as documented in this filing. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.80 W/kg. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively.
Class II Permissive Change with decreasing the WLAN Output Power through firmware and requesting the approval for portable category specific host Notebook PC, model numbers: UX391U, ZenBookX and BX391U. Also with the antennas Hong-Lin (Hong-Bo), part no. 260-26194 (14008-02920100) and INPAQ, part no. MDA-LBLB-04-004 (14008-02920000), as documented in this filing. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 0.80 W/kg. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively.
C2PC to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.57W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively.
C2PC to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported SAR values are Body and Simultaneous SAR are 0.79W/kg and 1.57W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively.
C2PC to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.57W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX461U, TP461U, RX461U and BX461U, with antenna INPAQ, part no. MDA-LBLB-04-003-A, 14008-0271000 and Innetech, part no. C22-015-4041-8071B, 14008-02710100.
The highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.59W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX461U, TP461U, RX461U and BX461U, with antenna INPAQ, part no. MDA-LBLB-04-003-A, 14008-0271000 and Innetech, part no. C22-015-4041-8071B, 14008-02710100.
The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.59W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX461U, TP461U, RX461U and BX461U, with antenna INPAQ, part no. MDA-LBLB-04-003-A, 14008-0271000 and Innetech, part no. C22-015-4041-8071B, 14008-02710100.
The highest reported SAR values are Body and Simultaneous SAR are 1.09W/kg and 1.51W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX561U and Q535U, with antenna ACON, part no. ANF6Y-100028, ANF6Y-100029, 04072-02570200 and LUXSHARE_ICT, part no. NB02-016009-002H, 04072-02570100.
The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.37W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX561U and Q535U, with antenna ACON, part no. ANF6Y-100028, ANF6Y-100029, 04072-02570200 and LUXSHARE_ICT, part no. NB02-016009-002H, 04072-02570100.
The highest reported SAR values are Body and Simultaneous SAR are 0.90W/kg and 1.56W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX561U and Q535U, with antenna ACON, part no. ANF6Y-100028, ANF6Y-100029, 04072-02570200 and LUXSHARE_ICT, part no. NB02-016009-002H, 04072-02570100.
The highest reported Body SAR = 1.16W/kg and Simultaneous SAR = 1.63W/kg; SPLSR: 0.018. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400.
The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.37W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400.
The highest reported SAR values are Body and Simultaneous SAR are 0.70W/kg and 1.32W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware
and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400.
The highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.37W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217
supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
RF Exposure Lab, LLC
|
various
|
BTL Inc.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Intel Mobile Commmunications France S.A.S.
|
various
|
Name |
V******** L********
|
various
|
T****** M********
|
various
|
A****** C******
|
various
|
S**** H******
|
various
|
N**** A****
|
various
|
Telephone Number |
88628******** Extension:
|
various
|
760 4********
|
various
|
886-2******** Extension:
|
various
|
886-2******** Extension:
|
various
|
00334********
|
various
|
Fax Number |
88628********
|
various
|
886-2********
|
various
|
886-2********
|
various
|
00334********
|
various
|
E-mail |
v******@dekra.com
|
various
|
t******@rfexposurelab.com
|
various
|
A******@newbtl.com
|
various
|
s******@quietek.com
|
various
|
n******@intel.com
|
|