happy holidays!

FCC ID: MSQ8265D2 Intel Dual Band Wireless-AC 8265

by: ASUSTeK Computer Inc latest update: 2019-07-22 model: 8265D2

Twenty Five grants have been issued under this FCC ID from 04/17/2017 to 07/22/2019 (this is one of one hundred and sixty-five releases in 2019 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, warrantee terms, drivers, instructions, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various (8265D2W) User Manual Users Manual pdf 746.00 KiB
various (8265D2W) UserMan Users Manual pdf 1.94 MiB
various 16. User Manual part 1 Users Manual pdf 3.78 MiB
various 16. User Manual part 2 Users Manual pdf 3.75 MiB
various 8265D2W- ISED UserMan 0321 Users Manual pdf 1.59 MiB
various 8265D2W- UserMan Users Manual pdf 4.44 MiB July 22 2019
various (8265D2W) Inpho SAR Internal Photos pdf 3.68 MiB
various (8265D2W) Expho SAR External Photos pdf 253.56 KiB
various (8265D2W) LabelLoc ID Label/Location Info pdf 37.81 KiB
various (8265D2W) Labelsmpl ID Label/Location Info pdf 61.45 KiB
various 8265D2W- ATTESTATION Cover Letter(s) pdf 158.21 KiB July 22 2019
various 8265D2W- Class II Change Cover Letter(s) pdf 174.56 KiB July 22 2019
various 8265D2W- Confidentiality Request Cover Letter(s) pdf 277.68 KiB July 22 2019
various 8265D2W- Declaration of authorization Cover Letter(s) pdf 182.25 KiB July 22 2019
various 8265D2W- Expho SAR External Photos pdf 197.55 KiB July 22 2019
various 8265D2W- ISED Label ID Label/Location Info pdf 208.30 KiB July 22 2019
various 8265D2W- Inpho SAR-Part 1 Internal Photos pdf 4.07 MiB July 22 2019
various 8265D2W- Inpho SAR-Part 2 Internal Photos pdf 4.29 MiB July 22 2019
various 8265D2W- TestRpt SAR RF Exposure Info pdf 4.27 MiB July 22 2019
various 8265D2W- Tsup SAR Test Setup Photos pdf 170.52 KiB July 22 2019
various Confidential 8265D2W- BlkDia Block Diagram pdf July 22 2019 confidential
various Confidential 8265D2W- OPDes Operational Description pdf July 22 2019 confidential
various Confidential 8265D2W- Schem Schematics pdf July 22 2019 confidential
various 8265D2W- UNII Declaration letter Cover Letter(s) pdf 291.82 KiB July 22 2019
various Internal Photos pdf
various Test Report pdf
various ID Label/Location Info pdf
various ID Label/Location Info pdf
various Attestation Statements pdf
various Cover Letter(s) pdf
various Attestation Statements pdf
various Attestation Statements pdf
various RF Exposure Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various External Photos pdf
various Internal Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various ID Label/Location Info pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various External Photos pdf
various Internal Photos pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various Cover Letter(s) pdf
various RF Exposure Info pdf
various Test Setup Photos pdf
various Cover Letter(s) pdf
various Test Report pdf
various ID Label/Location Info pdf October 08 2017
various ID Label/Location Info pdf October 08 2017
various Cover Letter(s) pdf
various External Photos pdf
various Cover Letter(s) pdf
various (8265D2W) User Manual Users Manual pdf 746.00 KiB
various (8265D2W) UserMan Users Manual pdf 1.94 MiB
various 16. User Manual part 1 Users Manual pdf 3.78 MiB
various 16. User Manual part 2 Users Manual pdf 3.75 MiB
various 8265D2W- ISED UserMan 0321 Users Manual pdf 1.59 MiB
various 8265D2W- UserMan Users Manual pdf 4.44 MiB July 22 2019
various (8265D2W) Inpho SAR Internal Photos pdf 3.68 MiB
various (8265D2W) Expho SAR External Photos pdf 253.56 KiB
various (8265D2W) LabelLoc ID Label/Location Info pdf 37.81 KiB
various (8265D2W) Labelsmpl ID Label/Location Info pdf 61.45 KiB
various 8265D2W- ATTESTATION Cover Letter(s) pdf 158.21 KiB July 22 2019
various 8265D2W- Class II Change Cover Letter(s) pdf 174.56 KiB July 22 2019
various 8265D2W- Confidentiality Request Cover Letter(s) pdf 277.68 KiB July 22 2019
various 8265D2W- Declaration of authorization Cover Letter(s) pdf 182.25 KiB July 22 2019
various 8265D2W- Expho SAR External Photos pdf 197.55 KiB July 22 2019
various 8265D2W- ISED Label ID Label/Location Info pdf 208.30 KiB July 22 2019
various 8265D2W- Inpho SAR-Part 1 Internal Photos pdf 4.07 MiB July 22 2019
various 8265D2W- Inpho SAR-Part 2 Internal Photos pdf 4.29 MiB July 22 2019
various 8265D2W- TestRpt SAR RF Exposure Info pdf 4.27 MiB July 22 2019
various 8265D2W- Tsup SAR Test Setup Photos pdf 170.52 KiB July 22 2019
various 8265D2W- UNII Declaration letter Cover Letter(s) pdf 291.82 KiB July 22 2019

frequency equipment class purpose
1 2019-07-22 2402 ~ PowerOutput DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
2 2422 ~ PowerOutput DTS - Digital Transmission System
3 5775 ~ PowerOutput NII - Unlicensed National Information Infrastructure TX
4 2019-03-22 5720 ~ 5720 NII - Unlicensed National Information Infrastructure TX
5 2402 ~ 2480 DTS - Digital Transmission System
6 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2018-03-16 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
8 2422 ~ 2462 DTS - Digital Transmission System
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2017-12-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 2422 ~ 2462 DTS - Digital Transmission System
12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
13 2017-10-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
15 2422 ~ 2462 DTS - Digital Transmission System
16 2017-08-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
17 2422 ~ 2462 DTS - Digital Transmission System
18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
19 2017-08-10 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
20 2422 ~ 2462 DTS - Digital Transmission System
21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
22 2017-04-17 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Change in identification of presently authorized equipment. Original FCC ID: PD98265D2 Grant Date: 06/28/2016
23 2422 ~ 2462 DTS - Digital Transmission System
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 JBP - Part 15 Class B Computing Device Peripheral

Application Forms

app s Applicant Information
various Effective 2019-07-22
various 2019-03-22
various 2018-03-16
various 2017-12-25
various 2017-10-24
various 2017-08-25
various 2017-08-10
various 2017-04-17
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 4F, No. 150, Li-Te Rd.
various Peitou, Taipei, N/A 112
various Peitou, Taipei, 112
various Taiwan
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code 8265D2
app s Person at the applicant's address to receive grant or for contact
various Name J**** Y******
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various DEKRA Testing and Certification Co., Ltd.
various BTL Inc.
various Name A******** L******
various V****** W********
various S**** L******
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various B1, No. 37, Lane 365, YangGuang St., NeiHu Distric
various No. 5-22, Rueishu Keng, Linkou Dist.
various New Taipei City
various Taipei
various New Taipei City, 24451
various 24451
various Taiwan
various Telephone Number 886-2********
various 886-2********
various 88628******** Extension:
various 88628********
various 886-2******** Extension:
various Fax Number 886-2********
various 886-2********
various 88628********
various E-mail a******@dekra.com
various v******@dekra.com
various s******@newbtl.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Dual Band Wireless-AC 8265
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousChange in identification of presently authorized equipment. Original FCC ID: PD98265D2 Grant Date: 06/28/2016
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM433D with antenna LUXSHARE ICT, part no. LA9RF213-CS-H, 14008-03590300 and Hong-Bo, part no. 260-26238, 14008-03590200. The highest reported Body and Simultaneous SAR values are 0.29W/kg and 1.28W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM433D with antenna LUXSHARE ICT, part no. LA9RF213-CS-H, 14008-03590300 and Hong-Bo, part no. 260-26238, 14008-03590200. The highest reported Body and Simultaneous SAR values are 1.15W/kg and 1.28W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UM433D with antenna LUXSHARE ICT, part no. LA9RF213-CS-H, 14008-03590300 and Hong-Bo, part no. 260-26238, 14008-03590200. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.26W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX462D and Q406D with antenna YAGEO, part no. ANTA0AA13091WLAN1, ANTA0AA13091WLAN2, 14008-03380200, 14008-03380300 and ACON, part no. ANF6Y-100058, ANF6Y-100059, 14008-03380000, 14008-03380100. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.32W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX462D and Q406D with antenna YAGEO, part no. ANTA0AA13091WLAN1, ANTA0AA13091WLAN2, 14008-03380200, 14008-03380300 and ACON, part no. ANF6Y-100058, ANF6Y-100059, 14008-03380000, 14008-03380100. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.13W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX462D and Q406D with antenna YAGEO, part no. ANTA0AA13091WLAN1, ANTA0AA13091WLAN2, 14008-03380200, 14008-03380300 and ACON, part no. ANF6Y-100058, ANF6Y-100059, 14008-03380000, 14008-03380100. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.32W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively. Class II Permissive Change with decreasing the WLAN Output Power through firmware and requesting the approval for portable category specific host Notebook PC, model numbers: UX391U, ZenBookX and BX391U. Also with the antennas Hong-Lin (Hong- Bo), part no. 260-26194 (14008-02920100) and INPAQ, part no. MDA-LBLB-04-004 (14008-02920000), as documented in this filing.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively. Class II Permissive Change with decreasing the WLAN Output Power through firmware and requesting the approval for portable category specific host Notebook PC, model numbers: UX391U, ZenBookX and BX391U. Also with the antennas Hong-Lin (Hong- Bo), part no. 260-26194 (14008-02920100) and INPAQ, part no. MDA-LBLB-04-004 (14008-02920000), as documented in this filing. The highest reported Body and Simultaneous SAR values are 0.47 W/kg and 0.80 W/kg.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively. Class II Permissive Change with decreasing the WLAN Output Power through firmware and requesting the approval for portable category specific host Notebook PC, model numbers: UX391U, ZenBookX and BX391U. Also with the antennas Hong-Lin (Hong-Bo), part no. 260-26194 (14008-02920100) and INPAQ, part no. MDA-LBLB-04-004 (14008-02920000), as documented in this filing. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 0.80 W/kg.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively. C2PC to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.36W/kg and 1.57W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively. C2PC to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported SAR values are Body and Simultaneous SAR are 0.79W/kg and 1.57W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively. C2PC to establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.57W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX461U, TP461U, RX461U and BX461U, with antenna INPAQ, part no. MDA-LBLB-04-003-A, 14008-0271000 and Innetech, part no. C22-015-4041-8071B, 14008-02710100. The highest reported Body and Simultaneous SAR values are 0.42W/kg and 1.59W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX461U, TP461U, RX461U and BX461U, with antenna INPAQ, part no. MDA-LBLB-04-003-A, 14008-0271000 and Innetech, part no. C22-015-4041-8071B, 14008-02710100. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.59W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX461U, TP461U, RX461U and BX461U, with antenna INPAQ, part no. MDA-LBLB-04-003-A, 14008-0271000 and Innetech, part no. C22-015-4041-8071B, 14008-02710100. The highest reported SAR values are Body and Simultaneous SAR are 1.09W/kg and 1.51W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX561U and Q535U, with antenna ACON, part no. ANF6Y-100028, ANF6Y-100029, 04072-02570200 and LUXSHARE_ICT, part no. NB02-016009-002H, 04072-02570100. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 1.37W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX561U and Q535U, with antenna ACON, part no. ANF6Y-100028, ANF6Y-100029, 04072-02570200 and LUXSHARE_ICT, part no. NB02-016009-002H, 04072-02570100. The highest reported SAR values are Body and Simultaneous SAR are 0.90W/kg and 1.56W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX561U and Q535U, with antenna ACON, part no. ANF6Y-100028, ANF6Y-100029, 04072-02570200 and LUXSHARE_ICT, part no. NB02-016009-002H, 04072-02570100. The highest reported Body SAR = 1.16W/kg and Simultaneous SAR = 1.63W/kg; SPLSR: 0.018.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400. The highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.37W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400. The highest reported SAR values are Body and Simultaneous SAR are 0.70W/kg and 1.32W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS UX490U, UX3490U and ZenBook3V, with antenna Hong Bo, part no. 00-3201005800, 14008-02310100 and LUXSHARE, part no. NB02-025009-004H, 14008-02310400. The highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.37W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device enabled for 5GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.59W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device enabled for 2.4 GHz band operations and also has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported SAR values are Body and Simultaneous SAR are 0.68W/kg and 1.59W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.59W/kg respectively.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various RF Exposure Lab, LLC
various BTL Inc.
various DEKRA Testing and Certification Co., Ltd.
various Intel Mobile Commmunications France S.A.S.
various Name V******** L****
various T****** M****
various A******** C********
various S**** H******
various N**** A********
various Telephone Number 88628******** Extension:
various 760 4********
various 886-2******** Extension:
various 886-2******** Extension:
various 00334********
various Fax Number 88628********
various 886-2********
various 886-2********
various 00334********
various E-mail v******@dekra.com
various t******@rfexposurelab.com
various A******@newbtl.com
various s******@quietek.com
various n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.007
2 2 15C CC MO 2412 2472 0.984
2 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.146
3 2 15E CC MO 5190 5230 0.142
3 3 15E CC MO 5210 5210 0.036
3 4 15E CC MO ND 5260 5320 0.162
3 5 15E CC MO ND 5270 5310 0.162
3 6 15E CC MO ND 5290 5290 0.023
3 7 15E CC MO ND 5500 5700 0.157
3 8 15E CC MO ND 5510 5670 0.23
3 9 15E CC MO ND 5530 5690 0.174
3 1 15E CC MO ND 5710 5710 0.186
3 11 15E CC MO ND 5720 5720 0.146
3 12 15E CC MO 5745 5825 0.22
3 13 15E CC MO 5755 5795 0.213
3 14 15E CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5180 5240 0.146
4 2 15E CC MO 5190 5230 0.142
4 3 15E CC MO 5210 5210 0.036
4 4 15E CC MO ND 5260 5320 0.162
4 5 15E CC MO ND 5270 5310 0.162
4 6 15E CC MO ND 5290 5290 0.023
4 7 15E CC MO ND 5500 5700 0.157
4 8 15E CC MO ND 5510 5670 0.23
4 9 15E CC MO ND 5530 5690 0.174
4 1 15E CC MO ND 5710 5710 0.186
4 11 15E CC MO ND 5720 5720 0.146
4 12 15E CC MO 5745 5825 0.22
4 13 15E CC MO 5755 5795 0.213
4 14 15E CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.007
5 2 15C CC MO 2412 2472 0.984
5 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402 2480 0.007
8 2 15C CC MO 2412 2472 0.984
8 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.146
9 2 15E 38 CC MO 5190 5230 0.142
9 3 15E 38 CC MO 5210 5210 0.036
9 4 15E 38 CC MO ND 5260 5320 0.162
9 5 15E 38 CC MO ND 5270 5310 0.162
9 6 15E 38 CC MO ND 5290 5290 0.023
9 7 15E 38 CC MO ND 5500 5700 0.157
9 8 15E 38 CC MO ND 5510 5670 0.23
9 9 15E 38 CC MO ND 5530 5690 0.174
9 1 15E 38 CC MO ND 5710 5710 0.186
9 11 15E 38 CC MO ND 5720 5720 0.146
9 12 15E 38 CC MO 5745 5825 0.22
9 13 15E 38 CC MO 5755 5795 0.213
9 14 15E 38 CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.007
11 2 15C CC MO 2412 2472 0.984
11 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E 38 CC MO 5180 5240 0.146
12 2 15E 38 CC MO 5190 5230 0.142
12 3 15E 38 CC MO 5210 5210 0.036
12 4 15E 38 CC MO ND 5260 5320 0.162
12 5 15E 38 CC MO ND 5270 5310 0.162
12 6 15E 38 CC MO ND 5290 5290 0.023
12 7 15E 38 CC MO ND 5500 5700 0.157
12 8 15E 38 CC MO ND 5510 5670 0.23
12 9 15E 38 CC MO ND 5530 5690 0.174
12 1 15E 38 CC MO ND 5710 5710 0.186
12 11 15E 38 CC MO ND 5720 5720 0.146
12 12 15E 38 CC MO 5745 5825 0.22
12 13 15E 38 CC MO 5755 5795 0.213
12 14 15E 38 CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15E 38 CC MO 5180 5240 0.146
14 2 15E 38 CC MO 5190 5230 0.142
14 3 15E 38 CC MO 5210 5210 0.036
14 4 15E 38 CC MO ND 5260 5320 0.162
14 5 15E 38 CC MO ND 5270 5310 0.162
14 6 15E 38 CC MO ND 5290 5290 0.023
14 7 15E 38 CC MO ND 5500 5700 0.157
14 8 15E 38 CC MO ND 5510 5670 0.23
14 9 15E 38 CC MO ND 5530 5690 0.174
14 1 15E 38 CC MO ND 5710 5710 0.186
14 11 15E 38 CC MO ND 5720 5720 0.146
14 12 15E 38 CC MO 5745 5825 0.22
14 13 15E 38 CC MO 5755 5795 0.213
14 14 15E 38 CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.007
15 2 15C CC MO 2412 2472 0.984
15 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402 2480 0.007
17 2 15C CC MO 2412 2472 0.984
17 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E 38 CC MO 5180 5240 0.146
18 2 15E 38 CC MO 5190 5230 0.142
18 3 15E 38 CC MO 5210 5210 0.036
18 4 15E 38 CC MO ND 5260 5320 0.162
18 5 15E 38 CC MO ND 5270 5310 0.162
18 6 15E 38 CC MO ND 5290 5290 0.023
18 7 15E 38 CC MO ND 5500 5700 0.157
18 8 15E 38 CC MO ND 5510 5670 0.23
18 9 15E 38 CC MO ND 5530 5690 0.174
18 1 15E 38 CC MO ND 5710 5710 0.186
18 11 15E 38 CC MO ND 5720 5720 0.146
18 12 15E 38 CC MO 5745 5825 0.22
18 13 15E 38 CC MO 5755 5795 0.213
18 14 15E 38 CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.146
19 2 15E 38 CC MO 5190 5230 0.142
19 3 15E 38 CC MO 5210 5210 0.036
19 4 15E 38 CC MO ND 5260 5320 0.162
19 5 15E 38 CC MO ND 5270 5310 0.162
19 6 15E 38 CC MO ND 5290 5290 0.023
19 7 15E 38 CC MO ND 5500 5700 0.157
19 8 15E 38 CC MO ND 5510 5670 0.23
19 9 15E 38 CC MO ND 5530 5690 0.174
19 1 15E 38 CC MO ND 5710 5710 0.186
19 11 15E 38 CC MO ND 5720 5720 0.146
19 12 15E 38 CC MO ND 5745 5825 0.22
19 13 15E 38 CC MO 5755 5795 0.213
19 14 15E 38 CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402 2480 0.007
20 2 15C CC MO 2412 2472 0.984
20 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15E 38 CC MO 5180 5240 0.146
22 2 15E 38 CC MO 5190 5230 0.142
22 3 15E 38 CC MO 5210 5210 0.036
22 4 15E 38 CC MO ND 5260 5320 0.162
22 5 15E 38 CC MO ND 5270 5310 0.162
22 6 15E 38 CC MO ND 5290 5290 0.023
22 7 15E 38 CC MO ND 5500 5700 0.157
22 8 15E 38 CC MO ND 5510 5670 0.23
22 9 15E 38 CC MO ND 5530 5690 0.174
22 1 15E 38 CC MO ND 5710 5710 0.186
22 11 15E 38 CC MO ND 5720 5720 0.146
22 12 15E 38 CC MO 5745 5825 0.22
22 13 15E 38 CC MO 5755 5795 0.213
22 14 15E 38 CC MO 5775 5775 0.105
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15C CC 2402 2480 0.007
23 2 15C CC MO 2412 2472 0.984
23 3 15C CC MO 2422 2462 0.683
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0150000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15B CC

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC