app
s
|
Applicant Information
|
|
various
|
Effective |
2023-04-21
|
various
|
2022-12-22
|
various
|
2022-03-28
|
various
|
2021-03-31
|
various
|
2021-02-18
|
various
|
2018-03-12
|
various
|
Applicant's complete, legal business name |
ASUSTeK Computer Inc
|
various
|
FCC Registration Number (FRN) |
0005821988
|
various
|
Physical Address |
1F, No. 15, Lide Rd.
|
various
|
4F, No. 150, Li-Te Rd.
|
various
|
Beitou, Taipei, N/A
|
various
|
Peitou, Taipei, N/A 112
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
b******@phoenix-testlab.de
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
MSQ
|
various
|
Equipment Product Code |
9462NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J****** Y****
|
various
|
Title |
Associate Vice President
|
various
|
Telephone Number |
+886-********
|
various
|
Fax Number |
+886-********
|
various
|
E-mail |
j******@asus.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
DEKRA
|
various
|
BV Hsinchu Branch
|
various
|
DEKRA Testing and Certification Co., Ltd
|
various
|
Name |
J**** W****
|
various
|
K****** L********
|
various
|
F****** Y******
|
various
|
V****** W******
|
various
|
Physical Address |
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
New Taipei City
|
various
|
Taiwan
|
various
|
Telephone Number |
886-2********
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
886-2********
|
various
|
E-mail |
j******@dekra.com
|
various
|
k******@bureauveritas.com
|
various
|
f******@dekra.com
|
various
|
v******@dekra.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/19/2023 |
various | 06/20/2023 |
various | 09/20/2022 |
various | 09/27/2021 |
various | 08/17/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wireless-AC 9462 |
various | Intel Wireless-AC 9462 (BT/WiFi) |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Yes |
various | Modular Equipment Type | Limited Single Modular Approval |
various | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Change in identification of presently authorized equipment. Original FCC ID: PD99462NG Grant Date: 12/11/2017 |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for ASUS platform with models: BR1402CG, BR1402CGA, BR1402FG and BR1402FGA, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 1.23 W/kg, respectively.
Antennas used - PIFA with models of WA-P-LE-02-155 (14008-05650000) and WA-P- LE-01-045 (14008-05650100), provided by the vendor of INPAQ; and models of TZ2486D (1408-05650200) and TZ2486E (1408-05650300), provided by the vendor of PULSE. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for ASUS platform with models: BR1402CG, BR1402CGA, BR1402FG and BR1402FGA, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.9 W/kg and 1.23 W/kg, respectively.
Antennas used - PIFA with models of WA-P-LE-02-155 (14008-05650000) and WA-P- LE-01-045 (14008-05650100), provided by the vendor of INPAQ; and models of TZ2486D (1408-05650200) and TZ2486E (1408-05650300), provided by the vendor of PULSE. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for ASUS platform with models: BR1402CG, BR1402CGA, BR1402FG and BR1402FGA, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.23 W/kg, respectively.
Antennas used - PIFA with models of WA-P-LE-02-155 (14008-05650000) and WA-P- LE-01-045 (14008-05650100), provided by the vendor of INPAQ; and models of TZ2486D (1408-05650200) and TZ2486E (1408-05650300), provided by the vendor of PULSE. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are < 0.1 W/kg and 1.17 W/kg, respectively.
Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.17 W/kg, respectively.
Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body SAR value is 0.4 W/kg (this device does not support 2.4GHz WLAN simultaneous transmission).
Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee
must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change
application, containing appropriate data demonstrating compliance, or a new
application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration,
enabled for either 2.4 or 5 GHz band operations as described in this filing.
OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The
highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg
respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 14mm minimum test separation distance.<br>
<br>
SAR testing was performed to demonstrate RF compliance.<br>
<br>
Class II Permissive Change for add additional chassis ASUSTeK, model number:
E1600WK. Reduce WIFI output power through BIOS and add new antennas. High-
Tek model no.: 0ACCN021036N and 0ACCN021035N. And SOUTHSTAR
TECHNOLOGY CO.,LTD model no.: N12-8030-R0A and N12-8029-R0A. SAR
compliance for body-carry configurations is limited to provision at least 0 cm
separation between the device and the user's body. The highest reported SAR
values for the body-worn use condition is 0.46 W/kg at 1g tissues, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for
this transmitter must not transmit simultaneously with any other antenna or
transmitter, except in accordance with FCC multi-transmitter product procedures.
Grantee must provide installation and operating instructions for complying with
FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this
transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance. The highest reported Body and
Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 14mm minimum test separation distance.<br>
<br>
SAR testing was performed to demonstrate RF compliance.<br>
<br>
Class II Permissive Change for add additional chassis ASUSTeK, model number:
E1600WK. Reduce WIFI output power through BIOS and add new antennas. High-
Tek model no.: 0ACCN021036N and 0ACCN021035N. And SOUTHSTAR
TECHNOLOGY CO.,LTD model no.: N12-8030-R0A and N12-8029-R0A. SAR
compliance for body-carry configurations is limited to provision at least 0 cm
separation between the device and the user's body. The highest reported SAR
values for the body-worn and simultaneous transmission use conditions are < 0.1
W/kg and 0.99 W/kg at 1g tissues, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter,
except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multitransmitter
product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate
with OEM integrator to determine applicable host configurations to ensure RF
exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 supplement documentation. When all conditions
of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. This transmitter has 20MHz,
40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only
device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band
operations as described in this filing. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF
exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host
product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and
0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 14mm minimum test separation distance.<br>
<br>
SAR testing was performed to demonstrate RF compliance.<br>
<br>
Class II Permissive Change for add additional chassis ASUSTeK, model number:
E1600WK. Reduce WIFI output power through BIOS and add new antennas. High-
Tek model no.: 0ACCN021036N and 0ACCN021035N. And SOUTHSTAR
TECHNOLOGY CO.,LTD model no.: N12-8030-R0A and N12-8029-R0A. SAR
compliance for body-carry configurations is limited to provision at least 0 cm
separation between the device and the user's body. The highest reported SAR values
for the body-worn and simultaneous transmission use conditions are 0.91 W/kg and
0.99 W/kg at 1g tissues, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475CE and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041.
The highest reported Body and Simultaneous SAR values are 0.28 W/kg and 1.02 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475CE and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041.
The highest reported Body and Simultaneous SAR values are 0.84 W/kg and 1.02 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance
with FCC multi-transmitter product procedures. Grantee must provide installation and
operating instructions for complying with FCC multi-transmitter product procedures. This
module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Grantee must coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for
either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475CE and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041.
The highest reported Body and Simultaneous SAR values are 0.57 W/kg and 1.02 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041.
The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 0.97 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041.
The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.97 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance
with FCC multi-transmitter product procedures. Grantee must provide installation and
operating instructions for complying with FCC multi-transmitter product procedures. This
module is approved in mobile/portable configurations. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Grantee must coordinate with OEM integrator to determine applicable host configurations to
ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating
compliance, or a new application. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for
either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product.
Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041.
The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 0.97 W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. OEM/Host
integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2
x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in
this filing. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest
reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal
or lesser gain may be used with this transmitter. End-users and installers must be provided
with transmitter operating conditions for satisfying RF exposure compliance. The highest
reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this
transmitter must not transmit simultaneously with any other antenna or transmitter, except
in accordance with FCC multi-transmitter product procedures. Grantee must provide
installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those
antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be
used with this transmitter. Grantee must coordinate with OEM integrator to determine
applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement
documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. This
transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device
is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5
GHz band operations as described in this filing. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure
compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. The highest
reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, at 14mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
A Test Lab Techno Corp.
|
various
|
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
Intel Corporation S.A.S.
|
various
|
Name |
M******** L****
|
various
|
E******** L******
|
various
|
F**** L******
|
various
|
V****** L****
|
various
|
N******** A******
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
+886-********
|
various
|
886-3********
|
various
|
88628******** Extension:
|
various
|
00334********
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
886-3********
|
various
|
88628********
|
various
|
00334********
|
various
|
E-mail |
m******@dekra.com
|
various
|
e******@bureauveritas.com
|
various
|
f******@atl-lab.com.tw
|
various
|
v******@dekra.com
|
various
|
n******@intel.com
|
|