FCC ID: MSQ9462NG Intel Wireless-AC 9462

by: ASUSTeK Computer Inc latest update: 2023-04-21 model: 9462NG

Nineteen grants have been issued under this FCC ID from 03/12/2018 to 04/21/2023 (this is one of ninety-three releases in 2023 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked drivers, troubleshooting guides, password defaults, warrantee terms, & instructions.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various E18882 E1600WKA UM draft10 Users Manual pdf 4.56 MiB March 23 2022 / September 20 2022 delayed release
various E20075 E1600WKA QSG V2 draft2 Users Manual pdf 1.82 MiB March 23 2022 / September 20 2022 delayed release
various TempConfidential 9462NGW- UserMan Part1 Users Manual pdf 4.15 MiB March 30 2021 / September 27 2021 delayed release
various TempConfidential 9462NGW- UserMan Part2 Users Manual pdf 3.84 MiB March 30 2021 / September 27 2021 delayed release
various TempConfidential 9462NGW-User manual CG Users Manual pdf 488.61 KiB April 21 2023 / October 19 2023 delayed release
various TempConfidential 9462NGW-User manual FG Users Manual pdf 494.10 KiB April 21 2023 / October 19 2023 delayed release
various TempConfidential Users Manual Users Manual pdf 517.75 KiB December 21 2022 / June 20 2023 delayed release
various Internal Photos Internal Photos pdf 2.88 MiB March 23 2022 / September 20 2022 delayed release
various TempConfidential 9462NGW- Inpho-20230412 Internal Photos pdf 2.18 MiB April 21 2023 / October 19 2023 delayed release
various TempConfidential 9462NGW- Inpho SAR Internal Photos pdf 3.70 MiB February 18 2021 / August 17 2021 delayed release
various TempConfidential 9462NGW- SAR Inpho Internal Photos pdf 4.97 MiB March 30 2021 / September 27 2021 delayed release
various TempConfidential Internal Photos-1 rev Internal Photos pdf 5.48 MiB December 21 2022 / June 20 2023 delayed release
various TempConfidential Internal Photos-2 rev Internal Photos pdf 5.55 MiB December 21 2022 / June 20 2023 delayed release
various TempConfidential Internal Photos-3 rev Internal Photos pdf 2.16 MiB December 21 2022 / June 20 2023 delayed release
various External Photos External Photos pdf 1.79 MiB March 23 2022 / September 20 2022 delayed release
various TempConfidential 9462NGW- Expho External Photos pdf 2.29 MiB April 21 2023 / October 19 2023 delayed release
various TempConfidential 9462NGW- Expho SAR External Photos pdf 538.49 KiB February 18 2021 / August 17 2021 delayed release
various TempConfidential 9462NGW- SAR Expho External Photos pdf 514.36 KiB March 30 2021 / September 27 2021 delayed release
various TempConfidential External Photos External Photos pdf 1.73 MiB December 21 2022 / June 20 2023 delayed release
various 9462NGW- LabelLoc ID Label/Location Info pdf 150.89 KiB March 30 2021 / March 31 2021
various 9462NGW- Labelsmpl ID Label/Location Info pdf 150.63 KiB March 30 2021 / March 31 2021
various 9462NGW-Label marking 9462NGW ID Label/Location Info pdf 700.84 KiB April 21 2023
various 9462NGW-Label marking BR1402CG 65W ID Label/Location Info pdf 528.71 KiB April 21 2023
various 9462NGW-Label marking BR1402CGA ID Label/Location Info pdf 532.19 KiB April 21 2023
various 9462NGW-Label marking BR1402FG 65W ID Label/Location Info pdf 528.56 KiB April 21 2023
various 9462NGW-Label marking BR1402FGA ID Label/Location Info pdf 532.56 KiB April 21 2023
various ID Label/Location Info pdf March 23 2022 / March 28 2022
various Label Location ID Label/Location Info pdf 190.60 KiB December 21 2022 / December 22 2022
various Label Sample BR1102CG ID Label/Location Info pdf 555.98 KiB December 21 2022 / December 22 2022
various Label Sample BR1102CGA ID Label/Location Info pdf 568.07 KiB December 21 2022 / December 22 2022
various Label Sample BR1102FG ID Label/Location Info pdf 556.21 KiB December 21 2022 / December 22 2022
various Label Sample BR1102FGA ID Label/Location Info pdf 568.17 KiB December 21 2022 / December 22 2022
various Label Sample RF label 9462NGW ID Label/Location Info pdf 565.51 KiB December 21 2022 / December 22 2022
various ID Label/Location Info pdf December 21 2022 / December 22 2022
various 9462NGW- Class II Change 20230414 ok Cover Letter(s) pdf 191.09 KiB April 21 2023
various 9462NGW- FCC IC Request for Confidentiality ok Cover Letter(s) pdf 198.55 KiB April 21 2023
various 9462NGW- FCC UNII Declaration letter ok Attestation Statements pdf 173.83 KiB April 21 2023
various 9462NGW- TestRpt-SAR - 0420 RF Exposure Info pdf 3.98 MiB April 21 2023
various ASUS FCC Covered List Attestation Letter ok Attestation Statements pdf 148.65 KiB April 21 2023
various ASUS FCC U.S. Agent Designation Attestation Letter ok Attestation Statements pdf 205.42 KiB April 21 2023
various AX201NGW 9462NGW Declaration of authorization ok Cover Letter(s) pdf 187.74 KiB April 21 2023
various Antenna spec INPAQ Aux Test Report pdf 2.23 MiB April 21 2023
various Antenna spec INPAQ Main Test Report pdf 2.24 MiB April 21 2023
various Antenna spec PULSE Aux Test Report pdf 4.21 MiB April 21 2023
various Antenna spec PULSE Main Test Report pdf 4.39 MiB April 21 2023
various Confidential 9462NGW- Circuit Schematics pdf April 21 2023 confidential
various Confidential 9462NGW-Block dia Block Diagram pdf April 21 2023 confidential
various Confidential 9462NGW-Operational Description Operational Description pdf April 21 2023 confidential
various TempConfidential 9462NGW- Tsup Test Setup Photos pdf 1.79 MiB April 21 2023 / October 19 2023 delayed release
various Confidential Operational Description G sensor Operational Description pdf December 21 2022 confidential
various FCC-Confidentiality Request Long term Cover Letter(s) pdf 133.96 KiB December 21 2022 / December 22 2022
various FCC-Confidentiality Request Short term Cover Letter(s) pdf 199.14 KiB December 21 2022 / December 22 2022
various FCC-Cover Letter Agent Authorization Cover Letter(s) pdf 382.94 KiB December 21 2022 / December 22 2022
various FCC-Cover Letter Description of Change Cover Letter(s) pdf 60.95 KiB December 21 2022 / December 22 2022
various FCC-RF Exposure Info SAR RF Exposure Info pdf 1.54 MiB December 21 2022 / December 22 2022
various FCC-RF Exposure Info SAR Appendix A-L RF Exposure Info pdf 2.79 MiB December 21 2022 / December 22 2022
various FCC-RF Exposure Info SAR Appendix Z RF Exposure Info pdf 5.01 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report INPAQ NB Test Report pdf 2.14 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report INPAQ NB TB Test Report pdf 2.91 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report LUXSHARE NB Test Report pdf 2.25 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report LUXSHARE NB TB Test Report pdf 2.94 MiB December 21 2022 / December 22 2022
various TempConfidential FCC-Test Set Up Photos SAR Test Setup Photos pdf 1.23 MiB December 21 2022 / June 20 2023 delayed release
various IC-Test Set Up Photo-SAR Test Setup Photos pdf 1.28 MiB December 21 2022 / June 20 2023 delayed release
various RF Exposure Info pdf March 23 2022 / March 28 2022
various Cover Letter(s) pdf March 23 2022 / March 28 2022
various Cover Letter(s) pdf March 23 2022 / March 28 2022
various Cover Letter(s) pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various TestSetupPhoto SAR Test Setup Photos pdf 401.70 KiB March 23 2022 / September 20 2022 delayed release
various 9462NGW- Class II Change OK Cover Letter(s) pdf 82.91 KiB March 30 2021 / March 31 2021
various 9462NGW- Confidentiality Request OK Cover Letter(s) pdf 116.84 KiB March 30 2021 / March 31 2021
various 9462NGW- Declaration of authorization OK Cover Letter(s) pdf 90.72 KiB March 30 2021 / March 31 2021
various 9462NGW- OPDes Operational Description pdf March 30 2021 confidential
various 9462NGW- SAR TestRpt RF Exposure Info pdf 4.18 MiB March 30 2021 / March 31 2021
various Confidential 9462NGW- BlkDia Block Diagram pdf March 30 2021 confidential
various Confidential 9462NGW- Schem Schematics pdf March 30 2021 confidential
various TempConfidential 9462NGW- SAR Tsup Test Setup Photos pdf 124.87 KiB March 30 2021 / September 27 2021 delayed release
various 9462NGW- UNII Declaration letter FCC OK Cover Letter(s) pdf 215.09 KiB March 30 2021 / March 31 2021
various 9462NGW- TestRpt SAR RF Exposure Info pdf 4.23 MiB February 18 2021
various Confidential 9462NGW- OPDes Operational Description pdf February 18 2021 confidential
various TempConfidential 9462NGW- Tsup SAR Test Setup Photos pdf 180.88 KiB February 18 2021 / August 17 2021 delayed release
various Cover Letter(s) pdf December 03 2018
various Cover Letter(s) pdf December 03 2018
various Cover Letter(s) pdf December 03 2018
various External Photos pdf December 03 2018
various Cover Letter(s) pdf December 03 2018
various E18882 E1600WKA UM draft10 Users Manual pdf 4.56 MiB March 23 2022 / September 20 2022 delayed release
various E20075 E1600WKA QSG V2 draft2 Users Manual pdf 1.82 MiB March 23 2022 / September 20 2022 delayed release
various TempConfidential 9462NGW- UserMan Part1 Users Manual pdf 4.15 MiB March 30 2021 / September 27 2021 delayed release
various TempConfidential 9462NGW- UserMan Part2 Users Manual pdf 3.84 MiB March 30 2021 / September 27 2021 delayed release
various TempConfidential 9462NGW-User manual CG Users Manual pdf 488.61 KiB April 21 2023 / October 19 2023 delayed release
various TempConfidential 9462NGW-User manual FG Users Manual pdf 494.10 KiB April 21 2023 / October 19 2023 delayed release
various TempConfidential Users Manual Users Manual pdf 517.75 KiB December 21 2022 / June 20 2023 delayed release
various Internal Photos Internal Photos pdf 2.88 MiB March 23 2022 / September 20 2022 delayed release
various TempConfidential 9462NGW- Inpho-20230412 Internal Photos pdf 2.18 MiB April 21 2023 / October 19 2023 delayed release
various TempConfidential 9462NGW- Inpho SAR Internal Photos pdf 3.70 MiB February 18 2021 / August 17 2021 delayed release
various TempConfidential 9462NGW- SAR Inpho Internal Photos pdf 4.97 MiB March 30 2021 / September 27 2021 delayed release
various TempConfidential Internal Photos-1 rev Internal Photos pdf 5.48 MiB December 21 2022 / June 20 2023 delayed release
various TempConfidential Internal Photos-2 rev Internal Photos pdf 5.55 MiB December 21 2022 / June 20 2023 delayed release
various TempConfidential Internal Photos-3 rev Internal Photos pdf 2.16 MiB December 21 2022 / June 20 2023 delayed release
various External Photos External Photos pdf 1.79 MiB March 23 2022 / September 20 2022 delayed release
various TempConfidential 9462NGW- Expho External Photos pdf 2.29 MiB April 21 2023 / October 19 2023 delayed release
various TempConfidential 9462NGW- Expho SAR External Photos pdf 538.49 KiB February 18 2021 / August 17 2021 delayed release
various TempConfidential 9462NGW- SAR Expho External Photos pdf 514.36 KiB March 30 2021 / September 27 2021 delayed release
various TempConfidential External Photos External Photos pdf 1.73 MiB December 21 2022 / June 20 2023 delayed release
various 9462NGW- LabelLoc ID Label/Location Info pdf 150.89 KiB March 30 2021 / March 31 2021
various 9462NGW- Labelsmpl ID Label/Location Info pdf 150.63 KiB March 30 2021 / March 31 2021
various 9462NGW-Label marking 9462NGW ID Label/Location Info pdf 700.84 KiB April 21 2023
various 9462NGW-Label marking BR1402CG 65W ID Label/Location Info pdf 528.71 KiB April 21 2023
various 9462NGW-Label marking BR1402CGA ID Label/Location Info pdf 532.19 KiB April 21 2023
various 9462NGW-Label marking BR1402FG 65W ID Label/Location Info pdf 528.56 KiB April 21 2023
various 9462NGW-Label marking BR1402FGA ID Label/Location Info pdf 532.56 KiB April 21 2023
various ID Label/Location Info pdf March 23 2022 / March 28 2022
various Label Location ID Label/Location Info pdf 190.60 KiB December 21 2022 / December 22 2022
various Label Sample BR1102CG ID Label/Location Info pdf 555.98 KiB December 21 2022 / December 22 2022
various Label Sample BR1102CGA ID Label/Location Info pdf 568.07 KiB December 21 2022 / December 22 2022
various Label Sample BR1102FG ID Label/Location Info pdf 556.21 KiB December 21 2022 / December 22 2022
various Label Sample BR1102FGA ID Label/Location Info pdf 568.17 KiB December 21 2022 / December 22 2022
various Label Sample RF label 9462NGW ID Label/Location Info pdf 565.51 KiB December 21 2022 / December 22 2022
various 9462NGW- Class II Change 20230414 ok Cover Letter(s) pdf 191.09 KiB April 21 2023
various 9462NGW- FCC IC Request for Confidentiality ok Cover Letter(s) pdf 198.55 KiB April 21 2023
various 9462NGW- FCC UNII Declaration letter ok Attestation Statements pdf 173.83 KiB April 21 2023
various 9462NGW- TestRpt-SAR - 0420 RF Exposure Info pdf 3.98 MiB April 21 2023
various ASUS FCC Covered List Attestation Letter ok Attestation Statements pdf 148.65 KiB April 21 2023
various ASUS FCC U.S. Agent Designation Attestation Letter ok Attestation Statements pdf 205.42 KiB April 21 2023
various AX201NGW 9462NGW Declaration of authorization ok Cover Letter(s) pdf 187.74 KiB April 21 2023
various Antenna spec INPAQ Aux Test Report pdf 2.23 MiB April 21 2023
various Antenna spec INPAQ Main Test Report pdf 2.24 MiB April 21 2023
various Antenna spec PULSE Aux Test Report pdf 4.21 MiB April 21 2023
various Antenna spec PULSE Main Test Report pdf 4.39 MiB April 21 2023
various TempConfidential 9462NGW- Tsup Test Setup Photos pdf 1.79 MiB April 21 2023 / October 19 2023 delayed release
various FCC-Confidentiality Request Long term Cover Letter(s) pdf 133.96 KiB December 21 2022 / December 22 2022
various FCC-Confidentiality Request Short term Cover Letter(s) pdf 199.14 KiB December 21 2022 / December 22 2022
various FCC-Cover Letter Agent Authorization Cover Letter(s) pdf 382.94 KiB December 21 2022 / December 22 2022
various FCC-Cover Letter Description of Change Cover Letter(s) pdf 60.95 KiB December 21 2022 / December 22 2022
various FCC-RF Exposure Info SAR RF Exposure Info pdf 1.54 MiB December 21 2022 / December 22 2022
various FCC-RF Exposure Info SAR Appendix A-L RF Exposure Info pdf 2.79 MiB December 21 2022 / December 22 2022
various FCC-RF Exposure Info SAR Appendix Z RF Exposure Info pdf 5.01 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report INPAQ NB Test Report pdf 2.14 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report INPAQ NB TB Test Report pdf 2.91 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report LUXSHARE NB Test Report pdf 2.25 MiB December 21 2022 / December 22 2022
various FCC-Test report Antenna Report LUXSHARE NB TB Test Report pdf 2.94 MiB December 21 2022 / December 22 2022
various TempConfidential FCC-Test Set Up Photos SAR Test Setup Photos pdf 1.23 MiB December 21 2022 / June 20 2023 delayed release
various IC-Test Set Up Photo-SAR Test Setup Photos pdf 1.28 MiB December 21 2022 / June 20 2023 delayed release
various RF Exposure Info pdf March 23 2022 / March 28 2022
various Cover Letter(s) pdf March 23 2022 / March 28 2022
various Cover Letter(s) pdf March 23 2022 / March 28 2022
various Cover Letter(s) pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various RF Exposure Info pdf March 23 2022 / March 28 2022
various TestSetupPhoto SAR Test Setup Photos pdf 401.70 KiB March 23 2022 / September 20 2022 delayed release
various 9462NGW- Class II Change OK Cover Letter(s) pdf 82.91 KiB March 30 2021 / March 31 2021
various 9462NGW- Confidentiality Request OK Cover Letter(s) pdf 116.84 KiB March 30 2021 / March 31 2021
various 9462NGW- Declaration of authorization OK Cover Letter(s) pdf 90.72 KiB March 30 2021 / March 31 2021
various 9462NGW- SAR TestRpt RF Exposure Info pdf 4.18 MiB March 30 2021 / March 31 2021
various TempConfidential 9462NGW- SAR Tsup Test Setup Photos pdf 124.87 KiB March 30 2021 / September 27 2021 delayed release
various 9462NGW- UNII Declaration letter FCC OK Cover Letter(s) pdf 215.09 KiB March 30 2021 / March 31 2021
various 9462NGW- TestRpt SAR RF Exposure Info pdf 4.23 MiB February 18 2021
various TempConfidential 9462NGW- Tsup SAR Test Setup Photos pdf 180.88 KiB February 18 2021 / August 17 2021 delayed release

frequency equipment class purpose
1 2023-04-21 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
2 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
3 2422 ~ 2462 DTS - Digital Transmission System
4 2022-12-22 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2422 ~ 2462 DTS - Digital Transmission System
7 2022-03-28 2422 ~ 2462 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
10 2021-03-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
11 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
12 2422 ~ 2462 DTS - Digital Transmission System
13 2021-02-18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2422 ~ 2462 DTS - Digital Transmission System
16 2018-03-12 2422 ~ 2462 DTS - Digital Transmission System Change in identification of presently authorized equipment. Original FCC ID: PD99462NG Grant Date: 12/11/2017
17 JBP - Part 15 Class B Computing Device Peripheral
18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX

Application Forms

app s Applicant Information
various Effective 2023-04-21
various 2022-12-22
various 2022-03-28
various 2021-03-31
various 2021-02-18
various 2018-03-12
various Applicant's complete, legal business name ASUSTeK Computer Inc
various FCC Registration Number (FRN) 0005821988
various Physical Address 1F, No. 15, Lide Rd.
various 4F, No. 150, Li-Te Rd.
various Beitou, Taipei, N/A
various Peitou, Taipei, N/A 112
various Taiwan
app s TCB Information
various TCB Application Email Address h******@acbcert.com
various b******@phoenix-testlab.de
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code MSQ
various Equipment Product Code 9462NG
app s Person at the applicant's address to receive grant or for contact
various Name J**** Y******
various Title Associate Vice President
various Telephone Number +886-********
various Fax Number +886-********
various E-mail j******@asus.com
app s Technical Contact
various Firm Name DEKRA
various BV Hsinchu Branch
various DEKRA Testing and Certification Co., Ltd
various Name J**** W********
various K**** L******
various F**** Y******
various V******** W******
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various New Taipei City
various Taiwan
various Telephone Number 886-2********
various 886-2******** Extension:
various Fax Number 886-2********
various 886-2********
various E-mail j******@dekra.com
various k******@bureauveritas.com
various f******@dekra.com
various v******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)10/19/2023
various06/20/2023
various09/20/2022
various09/27/2021
various08/17/2021
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDTS - Digital Transmission System
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Intel Wireless-AC 9462
variousIntel Wireless-AC 9462 (BT/WiFi)
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeLimited Single Modular Approval
variousSingle Modular Approval
variousPurpose / Application is forClass II Permissive Change
variousChange in identification of presently authorized equipment. Original FCC ID: PD99462NG Grant Date: 12/11/2017
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1402CG, BR1402CGA, BR1402FG and BR1402FGA, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 1.23 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-155 (14008-05650000) and WA-P- LE-01-045 (14008-05650100), provided by the vendor of INPAQ; and models of TZ2486D (1408-05650200) and TZ2486E (1408-05650300), provided by the vendor of PULSE.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1402CG, BR1402CGA, BR1402FG and BR1402FGA, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.9 W/kg and 1.23 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-155 (14008-05650000) and WA-P- LE-01-045 (14008-05650100), provided by the vendor of INPAQ; and models of TZ2486D (1408-05650200) and TZ2486E (1408-05650300), provided by the vendor of PULSE.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1402CG, BR1402CGA, BR1402FG and BR1402FGA, along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.23 W/kg, respectively. Antennas used - PIFA with models of WA-P-LE-02-155 (14008-05650000) and WA-P- LE-01-045 (14008-05650100), provided by the vendor of INPAQ; and models of TZ2486D (1408-05650200) and TZ2486E (1408-05650300), provided by the vendor of PULSE.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are < 0.1 W/kg and 1.17 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 1.17 W/kg, respectively. Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. This C2PC filing establishes portable category for ASUS platform with models: BR1102CG and BR1102CGA (those models are for laptop); as well as the models: BR1102FG and BR1102FGA (those models are capable of laptop and tablet modes), along with the antennas (main and aux) that are of the same type and lower gain compared from the original approval; as well as the power reduction for WLAN transmitters. SAR measurement was performed to demonstrate RF Exposure compliance. The highest reported Body SAR value is 0.4 W/kg (this device does not support 2.4GHz WLAN simultaneous transmission). Antennas used - PIFA with part numbers of DC33002SO4S(LA9RF448-CS-H) and DC33002SO5S(LA9RF449-CS-H), provided by the vendor of LUXSHARE; and part numbers of DC33002SJ4S(WA-P-LE-02-133) and DC33002SJ5S(WA-P-LE-01-036), provided by the vendor of INPAQ.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance.<br> <br> SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for add additional chassis ASUSTeK, model number: E1600WK. Reduce WIFI output power through BIOS and add new antennas. High- Tek model no.: 0ACCN021036N and 0ACCN021035N. And SOUTHSTAR TECHNOLOGY CO.,LTD model no.: N12-8030-R0A and N12-8029-R0A. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn use condition is 0.46 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance.<br> <br> SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for add additional chassis ASUSTeK, model number: E1600WK. Reduce WIFI output power through BIOS and add new antennas. High- Tek model no.: 0ACCN021036N and 0ACCN021035N. And SOUTHSTAR TECHNOLOGY CO.,LTD model no.: N12-8030-R0A and N12-8029-R0A. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are &lt; 0.1 W/kg and 0.99 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance.<br> <br> SAR testing was performed to demonstrate RF compliance.<br> <br> Class II Permissive Change for add additional chassis ASUSTeK, model number: E1600WK. Reduce WIFI output power through BIOS and add new antennas. High- Tek model no.: 0ACCN021036N and 0ACCN021035N. And SOUTHSTAR TECHNOLOGY CO.,LTD model no.: N12-8030-R0A and N12-8029-R0A. SAR compliance for body-carry configurations is limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.91 W/kg and 0.99 W/kg at 1g tissues, respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475CE and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041. The highest reported Body and Simultaneous SAR values are 0.28 W/kg and 1.02 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475CE and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041. The highest reported Body and Simultaneous SAR values are 0.84 W/kg and 1.02 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475CE and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041. The highest reported Body and Simultaneous SAR values are 0.57 W/kg and 1.02 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041. The highest reported Body and Simultaneous SAR values are 0.90 W/kg and 0.97 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041. The highest reported Body and Simultaneous SAR values are 0.14 W/kg and 0.97 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041. The highest reported Body and Simultaneous SAR values are 0.64 W/kg and 0.97 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.51W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.04W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77W/kg and 0.79W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various A Test Lab Techno Corp.
various DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
various Intel Corporation S.A.S.
various Name M******** L****
various E****** L******
various F****** L******
various V**** L****
various N******** A******
various Telephone Number +886-******** Extension:
various +886-********
various 886-3********
various 88628******** Extension:
various 00334********
various Fax Number +886-********
various +886-********
various 886-3********
various 88628********
various 00334********
various E-mail m******@dekra.com
various e******@bureauveritas.com
various f******@atl-lab.com.tw
various v******@dekra.com
various n******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E CC MO 5180 5240 0.104
2 2 15E CC MO 5190 5230 0.04
2 3 15E CC MO 5210 5210 0.026
2 4 15E CC MO ND 5260 5320 0.108
2 5 15E CC MO ND 5270 5310 0.049
2 6 15E CC MO ND 5290 5290 0.02
2 7 15E CC MO ND 5500 5700 0.125
2 8 15E CC MO ND 5510 5670 0.136
2 9 15E CC MO ND 5530 5690 0.103
2 1 15E CC MO 5745 5825 0.135
2 11 15E CC MO 5755 5795 0.135
2 12 15E CC MO 5775 5775 0.061
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C CC 2402 2480 0.01
3 2 15C CC MO 2412 2472 0.64
3 3 15C CC MO 2422 2462 0.228
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.104
5 2 15E CC MO 5190 5230 0.04
5 3 15E CC MO 5210 5210 0.026
5 4 15E CC MO ND 5260 5320 0.108
5 5 15E CC MO ND 5270 5310 0.049
5 6 15E CC MO ND 5290 5290 0.02
5 7 15E CC MO ND 5500 5700 0.125
5 8 15E CC MO ND 5510 5670 0.136
5 9 15E CC MO ND 5530 5690 0.103
5 1 15E CC MO 5745 5825 0.135
5 11 15E CC MO 5755 5795 0.135
5 12 15E CC MO 5775 5775 0.061
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402 2480 0.01
6 2 15C CC MO 2412 2472 0.64
6 3 15C CC MO 2422 2462 0.228
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.01
7 2 15C CC MO 2412 2472 0.64
7 3 15C CC MO 2422 2462 0.228
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E 38 CC MO 5180 5240 0.104
9 2 15E 38 CC MO 5190 5230 0.04
9 3 15E 38 CC MO 5210 5210 0.026
9 4 15E 38 CC MO ND 5260 5320 0.108
9 5 15E 38 CC MO ND 5270 5310 0.049
9 6 15E 38 CC MO ND 5290 5290 0.02
9 7 15E 38 CC MO ND 5500 5700 0.125
9 8 15E 38 CC MO ND 5510 5670 0.136
9 9 15E 38 CC MO ND 5530 5690 0.103
9 1 15E 38 CC MO 5745 5825 0.135
9 11 15E 38 CC MO 5755 5795 0.135
9 12 15E 38 CC MO 5775 5775 0.061
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15E CC MO 5180 5240 0.104
11 2 15E CC MO 5190 5230 0.04
11 3 15E CC MO 5210 5210 0.026
11 4 15E CC MO ND 5260 5320 0.108
11 5 15E CC MO ND 5270 5310 0.049
11 6 15E CC MO ND 5290 5290 0.02
11 7 15E CC MO ND 5500 5700 0.125
11 8 15E CC MO ND 5510 5670 0.136
11 9 15E CC MO ND 5530 5690 0.103
11 1 15E CC MO 5745 5825 0.135
11 11 15E CC MO 5755 5795 0.135
11 12 15E CC MO 5775 5775 0.061
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402 2480 0.01
12 2 15C CC MO 2412 2472 0.64
12 3 15C CC MO 2422 2462 0.228
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.104
13 2 15E CC MO 5190 5230 0.04
13 3 15E CC MO 5210 5210 0.026
13 4 15E CC MO ND 5260 5320 0.108
13 5 15E CC MO ND 5270 5310 0.049
13 6 15E CC MO ND 5290 5290 0.02
13 7 15E CC MO ND 5500 5700 0.125
13 8 15E CC MO ND 5510 5670 0.136
13 9 15E CC MO ND 5530 5690 0.103
13 1 15E CC MO 5745 5825 0.135
13 11 15E CC MO 5755 5795 0.135
13 12 15E CC MO 5775 5775 0.061
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.01
15 2 15C CC MO 2412 2472 0.64
15 3 15C CC MO 2422 2462 0.228
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15C CC 2402 2480 0.01
16 2 15C CC MO 2412 2472 0.64
16 3 15C CC MO 2422 2462 0.228
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2402.00000000 2480.00000000 0.0120000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15E 38 CC MO 5180 5240 0.104
19 2 15E 38 CC MO 5190 5230 0.04
19 3 15E 38 CC MO 5210 5210 0.026
19 4 15E 38 CC MO ND 5260 5320 0.108
19 5 15E 38 CC MO ND 5270 5310 0.049
19 6 15E 38 CC MO ND 5290 5290 0.02
19 7 15E 38 CC MO ND 5500 5700 0.125
19 8 15E 38 CC MO ND 5510 5670 0.136
19 9 15E 38 CC MO ND 5530 5690 0.103
19 1 15E 38 CC MO 5745 5825 0.135
19 11 15E 38 CC MO 5755 5795 0.135
19 12 15E 38 CC MO 5775 5775 0.061

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC