TempConfidential USSC263079001 FCC SAR App A Setup Photos r1
Test Setup Photos
pdf
June 17 2026
/
December 15 2026
delayed release
various
RF Exposure Info
pdf
June 17 2026
/
June 18 2026
various
Cover Letter(s)
pdf
January 06 2026
/
February 09 2026
various
Cover Letter(s)
pdf
February 02 2026
/
February 09 2026
various
Cover Letter(s)
pdf
February 02 2026
/
February 09 2026
various
Cover Letter(s)
pdf
January 06 2026
/
February 09 2026
various
Attestation Statements
pdf
January 06 2026
/
February 09 2026
various
Cover Letter(s)
pdf
January 06 2026
/
February 09 2026
various
External Photos
pdf
January 06 2026
/
February 09 2026
various
ID Label/Location Info
pdf
January 06 2026
/
February 09 2026
various
Attestation Statements
pdf
January 06 2026
/
February 09 2026
various
Cover Letter(s)
pdf
January 06 2026
/
February 09 2026
various
Confidential BE211D2W NII Software Security Description FCC
SDR Software/Security Info.
pdf
January 06 2026
confidential
Application Forms
app
s
Applicant Information
various
Effective
2026-09-15
various
2026-06-18
various
2026-02-09
various
Applicant's complete, legal business name
ASUSTeK COMPUTER INC.
various
FCC Registration Number (FRN)
0005821988
various
Physical Address
1F, No. 15, Lide Rd.
various
Beitou, Taipei, N/A
various
Beitou, Taipei, N/A 112
various
Taiwan
app
s
TCB Information
various
TCB Application Email Address
h******@acbcert.com
various
TCB Scope
A4: UNII devices & low power transmitters using spread spectrum techniques
various
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
various
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app
s
FCC ID
various
Grantee Code
MSQ
various
Equipment Product Code
BE211D2
app
s
Person at the applicant's address to receive grant or for contact
various
Name
J**** Y******
various
Title
Associate Vice President
various
Telephone Number
+886-********
various
Fax Number
+886-********
various
E-mail
j******@asus.com
app
s
Technical Contact
various
Firm Name
Eurofins E&E Wireless Taiwan Co., Ltd.
various
DEKRA Testing and Certification Co., Ltd
various
DEKRA Testing and Certification Co., Ltd.
various
Name
F******** L********
various
L****** Y********
various
Physical Address
No. 140-1, Changan Street, Bade District
various
No. 26, Huaya 1st Rd., Guishan Dist.
various
Huaya 1st Rd., Guishan Dist.
various
Taoyuan City
various
New Taipei City
various
Taiwan
various
Telephone Number
886-3********
various
886-3********
various
886 3********
various
E-mail
f******@cpt.eurofinsasia.com
various
l******@dekra.com
app
s
Non Technical Contact
various
Firm Name
ASUS COMPUTER INTERNATIONAL
various
Name
G******** L********
various
Physical Address
48720 Kato Road
various
Fremont, 94538
various
Fremont
various
Fremont, California
various
United States
various
Taiwan
various
Telephone Number
51060********
various
51060********
various
(510)********
various
Fax Number
(510)********
various
E-mail
g******@asus.com
app
s
Confidentiality (long or short term)
various
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
various
No
various
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:
Yes
various
No
various
If so, specify the short-term confidentiality release date (MM/DD/YYYY format)
03/14/2027
various
12/15/2026
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app
s
Cognitive Radio & Software Defined Radio, Class, etc
various
Is this application for software defined/cognitive radio authorization?
No
various
Equipment Class
NII - Unlicensed National Information Infrastructure TX
various
6CD - 15E 6 GHz Low Power Dual Client
various
DTS - Digital Transmission System
various
DXX - Part 15 Low Power Communication Device Transmitter
various
DSS - Part 15 Spread Spectrum Transmitter
various
6VL - 15E 6 GHZ Very Low Power Device
various
JBP - Part 15 Class B Computing Device Peripheral
various
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)
Intel BE211
various
Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?
Yes
various
No
various
Modular Equipment Type
Single Modular Approval
various
Purpose / Application is for
Class II Permissive Change
various
Class II permissive change or modification of presently authorized equipment
various
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211D2 Grant Date: 08/27/2025
various
Change in identification of presently authorized equipment. Original FCC ID: PD9BE211D2 Grant Date: 09/15/2025
various
Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization?
Yes
various
Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization?
No
various
Grant Comments
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 42mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.55 W/kg respectively.
2.4GHz and 5GHz WLAN TAS feature enabled.
various
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device supports 20, 40, 80, 160, and 320 MHz BW modes.
This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 42mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.55 W/kg respectively.
2.4GHz and 5GHz WLAN TAS feature enabled.
various
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 42mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.55 W/kg respectively.
2.4GHz and 5GHz WLAN TAS feature enabled.
various
Modular Approval filing. This grant covers BT-HADM mode of operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi).
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 1.55 W/kg respectively.
2.4GHz and 5GHz WLAN TAS feature enabled.
various
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 42mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 1.55 W/kg respectively.
2.4GHz and 5GHz WLAN TAS feature enabled.
various
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance.
The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification.
This device supports 20, 40, 80,160, and 320 MHz BW modes.
This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 42mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.55 W/kg respectively.
2.4GHz and 5GHz WLAN TAS feature enabled.
various
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating
conditions for satisfying RF exposure compliance.
The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification.
This device supports 20, 40, 80,160, and 320 MHz BW modes.
This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 42mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.55 W/kg respectively.
various
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 42mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.55 W/kg respectively.
various
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 42mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 1.55 W/kg respectively.
various
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 42mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.13 W/kg and 1.55 W/kg respectively.
various
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
This device supports 20, 40, 80, 160, and 320 MHz BW modes.
This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 42mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance.
This module meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.55 W/kg respectively.
various
Modular Approval filing. This grant covers BT-HADM mode of operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi).
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi).
Class II Permissive Change with a decrease in the Output Power through firmware respectively and to request approval for portable category specific host Googlebook, Notebook PC, Model: CX9406CAA and CB9406CAA with the antenna LUXSHARE-ICT, part no. LA9RF655-NB-H (14008-06670100). The detail information please refer to the filing.
Antenna(s) is/are of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance.
The highest reported Body and Simultaneous SAR values are 0.39 W/kg and 1.55 W/kg respectively.
various
This C2PC adds portable for full power and 3 different additional SKU versions of the product that are electronically identical but have different power profiles.
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi).
For 42mm SKU: The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 1.56 W/kg respectively.
The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.79 W/kg and 1.60 W/kg respectively.
SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 11mm: The highest reported Body and Simultaneous SAR values are: 0.79 W/kg and 1.54 W/kg respectively.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
various
This C2PC adds portable for full power and 3 different additional SKU versions of the product that are electronically identical but have different power profiles.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device supports 20, 40, 80,160, and 320 MHz BW modes.
Power Density and SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi).
For 42mm SKU: The highest reported Body and Simultaneous SAR values are 0.71 W/kg and 1.56 W/kg respectively.
The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 11mm: The highest reported Body and Simultaneous SAR values are: 0.79 W/kg and 1.54 W/kg respectively.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference This filing meets MPE requirements of KDB 447498 an antenna(s): PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
various
This C2PC adds portable for full power and 3 different additional SKU versions of the product that are electronically identical but have different power profiles.
Power Output listed is EIRP. Modular Approval Filing. This grant covers VLP mode and is not allowed to operate under the control of a Low-power indoor access point while in this mode of operation. Device is a 2x2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The host-product antenna must be permanently installed and not replaceable by the end user. Any attempt to replace or modify the antenna by the end user is strictly prohibited and will void the FCC certification.
This device supports 20, 40, 80,160, and 320 MHz BW modes.
Power Density and SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi).
For 42mm SKU: The highest reported Body and Simultaneous SAR values are 0.71 W/kg and 1.56 W/kg respectively.
The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 11mm: The highest reported Body and Simultaneous SAR values are: 0.79 W/kg and 1.54 W/kg respectively.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi.
various
This C2PC adds portable for full power and 3 different additional SKU versions of the product that are electronically identical but have different power profiles.
Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi).
For 42mm SKU: The highest reported Body and Simultaneous SAR values are 0.80 W/kg and 1.56 W/kg respectively.
The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.80 W/kg and 1.60 W/kg respectively.
SKU 11mm: The highest reported Body and Simultaneous SAR values are: 0.75 W/kg and 1.54 W/kg respectively.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi).
various
This C2PC adds portable for full power and 3 different additional SKU versions of the product that are electronically identical but have different power profiles.
Power Output listed is conducted. Modular Approval filing. This device contains a 2 x 2 MIMO configuration. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi).
For 42mm SKU: The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.56 W/kg respectively.
The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.79 W/kg and 1.60 W/kg respectively.
SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.78 W/kg and 1.60 W/kg respectively.
SKU 11mm: The highest reported Body and Simultaneous SAR values are: 0.28 W/kg and 1.54 W/kg respectively.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi).
various
This C2PC adds portable for full power and 3 different additional SKU versions of the product that are electronically identical but have different power profiles.
Modular Approval filing. This grant covers BT-HADM mode of operation. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna for each distance/SKU. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi).
For 42mm SKU: The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.56 W/kg respectively.
The additional SKU/power profiles determine conditions based on modular stand-alone SAR evaluation to establish the minimum antenna to user separation distances (5mm, 8mm and 11mm) at a maximum SAR value less than 0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v06 and KDB 616217 D04 for Laptop and Tablets v01.
SKU 5 mm: The highest reported Body and Simultaneous SAR values are: 0.79 W/kg and 1.60 W/kg respectively.
SKU 8 mm: The highest reported Body and Simultaneous SAR values are: 0.78 W/kg and 1.60 W/kg respectively.
SKU 11mm: The highest reported Body and Simultaneous SAR values are: 0.28 W/kg and 1.54 W/kg respectively.
This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antenna(s): PIFA reference antenna (2.95 dBi).
various
Is there an equipment authorization waiver associated with this application?
No
various
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC