app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2018-05-21
|
1 2 3
|
Applicant's complete, legal business name |
CyberTAN Technology Inc.
|
1 2 3
|
FCC Registration Number (FRN) |
0008910655
|
1 2 3
|
Physical Address |
No. 99, Park Avenue III
|
1 2 3
|
Hsinchu, N/A 308
|
1 2 3
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
N89
|
1 2 3
|
Equipment Product Code |
NM3531
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
C******** K******
|
1 2 3
|
Title |
Director
|
1 2 3
|
Telephone Number |
886-3******** Extension:
|
1 2 3
|
Fax Number |
886-3********
|
1 2 3
|
E-mail |
c******@cybertan.com.tw
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/17/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 | DTS - Digital Transmission System |
1 2 3 | NII - Unlicensed National Information Infrastructure TX |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n/ac BT5.0 combo NGFF M.2 2230 card |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Original Equipment |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. Antennas for this device must be installed to provide a separation distance of at least 20-cm from all persons, must have gain less than 2.92 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 3 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. Antennas for this device must be installed to provide a separation distance of at least 20-cm from all persons, must have gain less than 2.92 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz operating modes. |
1 2 3 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. Antennas for this device must be installed to provide a separation distance of at least 20-cm from all persons, must have gain less than 4.0 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40, and 80 MHz operating modes. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
SPORTON International Inc.
|
1 2 3
|
Name |
S****** J********
|
1 2 3
|
Telephone Number |
886-3******** Extension:
|
1 2 3
|
Fax Number |
886-3********
|
1 2 3
|
E-mail |
s******@sporton.com.tw
|
|