NM353-1 User Manual CyberTAN Technology, Inc. Model Name Description Version Date Author 802.11a/b/g/n/ac BT5.0 combo NGFF M.2 2230 card NM353-1 Release 1.0 April 18, 2018 Kello Wu Confidential i 2018-04-18 NM353-1 User Manual Revision History Date 2018/4/18 Release 1.0 Related Documents Author Date Author Kello Wu Description First preliminary release. Description CyberTAN Technology, Inc. No. 99, Park Avenue III Hsinchu Science Park Hsinchu, Taiwan 30077 R.O.C. Local Rep.:
Company Name: CyberTAN Company Addr.: 1595 North Main St. Orange, CA 92867 Contact Name: Kent Yang Job Title / Dept.: Sr. FAE Tel No.: (714)258-2588 Fax No.: (714)258-2588 E-mail: Kent.yang@cybertan-usa.com CyberTAN is a registered trademark of CyberTAN Technology, Inc. Bluetooth is a trademark of the Bluetooth SIG. All other trademarks appearing herein are the property of their respective owners. This document may contain privileged or confidential information that is the property of CyberTAN Technology, Inc. and the improper disclosure of which is an offense punishable under law. This document may be viewed and used only by the individual or other entity that received it directly from CyberTAN. Redistribution of this document in any form is strictly prohibited. The products described in this document are not intended or designed for use in any application involving risk of harm to persons or property. CYBERTAN PROVIDES THIS DOCUMENT AS-IS, WITHOUT WARRANTY OF ANY KIND. CYBERTAN DISCLAIMS ALL WAR-RANTIES, EXPRESSED AND IMPLIED, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT. CyberTAN Confidential 1 2018-04-18 NM353-1 User Manual Table of Contents 1. Overview3 1.1 Basic Specifications....4 2. Mechanical Characteristics6 2.1 Pin Definition...6 2.2 Module Dimensions.7 3. EMI Certification Note..8 4. Regulatory Information.8 4.1 Federal Communication Commission Interference Statement....8 4.2 Antenna List and Requirement.....9 CyberTAN Confidential 2 2018-04-18 NM353-1 User Manual 1. Overview Makers of smart phones and home appliances can easily add full IEEE 802.11ac, Bluetooth into their products with the NM353-1 combo module. The combo module features tiny sizes and low power consumption. The NM353-1 is the perfect way to offer high-speed, worldwide wireless connectivity in any handheld or wireless-attached digital devices. Features and Benefits Single Chip Design SoC minimizes component count and simplifies hardware and software design. NGFF M.2 2230 standard Interface The pin definition and dimension of module design follow the M.2 standard. Seamless Wireless Connectivity The module supports the IEEE 802.11a/b/g/n/ac standards for high speed and transparent inter-operation with most home and business WLANs and all public hot spots around the world. Up-to-date, High-level Security WEP, WPA, and WPA2 are supported to ensure maximum data privacy. Dynamic Rate Shifting Wireless transmission speed is automatically adjusted on the basis of signal strength to achieve maximum availability and link reliability. CyberTAN Confidential 3 2018-04-18 NM353-1 User Manual 1.1 Basic Specifications Table 1: Basic Specifications WiFi:
IEEE 802.11a , IEEE 802.11b, IEEE 802.11g, Draft IEEE 802.11n, IEEE 802.11d, IEEE 802.11ac Standards IEEE 802.11e, IEEE 802.11h, IEEE 802.11i, IEEE 802.11k, IEEE 802.11r Bus Interface Form Factor BT:
V2.1+EDR / BT v3.0 / BT v4.2 / BT v5.0 WiFi: PCIe GEN1 and SDIO 3.0 BT: UART and USB 2.0 NGFF TYPE 2230-S3-A-E 802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:
11, 5.5, 2, 1 Mbps;
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:
MCS 0 to 15 for HT20MHz;
MCS 0 to 15 for HT40MHz Data Rate 802.11ac:
Nss2 MCS 0 to 8 for VHT20MHz;
Nss2 MCS 0 to 9 for VHT40MHz;
Nss2 MCS 0 to 9 for VHT80MHz;
WiFi 2.4GHz:
11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan WiFi 5GHz:
Band 1: (Ch. 36 48) Band 2: (Ch. 52 64) Band 3: (Ch. 100 140) Band 4: (Ch. 149 165) BT 2.4GHz:
Ch. 0 ~78 Operating Channel CyberTAN Confidential 4 2018-04-18 Frequency Range 5.15GHz ~ 5.35GHz, 5.47GHz ~ 5.85GHz 2.400GHz ~ 2.4835 GHz NM353-1 User Manual Transmit Output Power
(Tolerance: +/- 1.5dBm) 802.11b (2.4GHz) 802.11g (2.4GHz) 802.11n (2.4GHz) 22dBm @ All rates 19dBm @ 6Mbps 19dBm @MCS 0 17.5dBm @ 54Mbps 17dBm @MCS15 802.11a (5GHz) 802.11ac (5GHz) 23dBm @ 6Mbps 19dBm @ 54Mbps 802.11n (5GHz) 23dBm @MCS 0 18dBm @MCS 15 BT:
Max +6dBm 2.4GHz 11b:
-90dBm typical @11Mbps 11g:
-80dBm typical @54Mbps 23dBm @MCS 0 16.5dBm @MCS 9 5GHz 11a:
-80dBm typical @54Mbps 11n:
-75dBm typical @MCS15_HT20
-95dBm typical @MCS0_HT20 11ac:
-66dBm typical @MCS9_VHT80
-89dBm typical @MCS0_VHT80 Receiver Sensitivity 11n:
-75dBm typical MCS15_HT20
-95dBm typical @MCS0_HT20 BT:
Operating Voltage OS supported
-95dBm typical @1Mbps, BLE mode 5V & 3.3V & 1.8V(SDIO 3.0) Windows 10 / Linux/Android Operating Temperature
-20~+65 degree C Antenna connector Hirose U.FL type or equivalent CyberTAN Confidential 5 2018-04-18 2. Mechanical Characteristics 2.1 Pin Definition Pin Name Description PIN
#
1 3 5 7 9 GND USB_D+
USB_D-
GND SDIO CLK 11 SDIO CMD 13 SDIO DATA0 15 SDIO DATA1 17 SDIO DATA2 19 SDIO DATA3 USB D+ signal USB D- signal NM353-1 User Manual Pin Name Description PIN
#
2 4 6 8 3.3V 3.3V X X 10 X 12 X 14 X 16 X 18 GND 20 BT_HOST_WAKE BT Wake UP Host 21 SDIO WAKE SDIO Wake UP Host 22 UART TX UART serial data output 23 X 25 Notch 27 Notch 29 Notch 31 Notch 33 GND 24 Notch 26 Notch 28 Notch 30 Notch 32 UART RX UART serial data output 34 UART RTS UART request to send 35 PCIE_RDP PCIe Rx Diff pair 36 UART CTS UART clear to send 37 PCIE_RDN PCIe Rx Diff pair 39 GND 41 PCIE_TDP PCIe Tx Diff pair 43 PCIE_TDN PCIe Tx Diff pair 45 GND 47 REFCLKP PCIe Diff Ref CLK+
38 X 40 X 42 X 44 X 46 X 48 X 49 REFCLKN PCIe Diff Ref CLK-
50 SUSCLK(32kHz) Clock Ref 51 GND 52 PCIE_PERST_L PCIe reset 53 PCIE_CLKREQ_L Ref CLK request signal 54 BT_DEV_WAKE Host Wake up BT device 55 PCIE_PME_L Power management event 56 WL_DEV_WAKE Host Wake up WiFi Device CyberTAN Confidential 6 2018-04-18 NM353-1 User Manual 57 GND 59 X 58 X 60 X 61 VDD1P8 Supply voltage for SDIO 3.0 62 X 63 GND Ground 64 X 65 VDD1P8 Supply voltage for SDIO 3.0 66 BT_REG_ON Host ON/OFF BT Power 67 VDD5_PA Supply voltage for PA 68 WL_REG_ON Host ON/OFF WiFi Power 69 GND Ground 71 VDD5_PA Supply voltage for PA 73 VDD5_PA Supply voltage for PA 75 GND Ground 2.2 Module Dimensions Unit: mm 70 X 72 3.3V 74 3.3V CyberTAN Confidential 7 2018-04-18 3. EMI Certification Notes It is recommended that the module be entirely encased in metal shielding to ensure meeting FCC requirement. NM353-1 User Manual 4. Regulatory Information 4.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. The integrator should clarify obligations that the host/module combination complies with FCC Part 15B requirements in the Host User Guide. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without C2PC. This device is restricted for indoor use. CyberTAN Confidential 8 2018-04-18 NM353-1 User Manual IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following "Contains FCC ID:
N89-NM3531". If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. 4.2 Antenna List and Requirement Antenna Type: Internal Dipole Antenna Antenna Peak Gain: 4dBi max on 5GHz 2.92dBi max on 2.4GHz CyberTAN Confidential 9 2018-04-18