app
s
|
Applicant Information
|
|
various
|
Effective |
2018-09-07
|
various
|
2018-05-14
|
various
|
2018-03-13
|
various
|
2017-10-20
|
various
|
2017-09-20
|
various
|
2017-07-05
|
various
|
2016-11-16
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0008035131
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
100 Center Point Circle
|
various
|
Columbia, SC
|
various
|
Columbia, South Carolina 29210
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@ACBcert.com
|
various
|
h******@acbcert.com
|
various
|
H******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
18265NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S******** C**** H****
|
various
|
Title |
Product Regulations Engineer
|
various
|
Telephone Number |
803-3********
|
various
|
Fax Number |
803-2********
|
various
|
E-mail |
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Intel Mobile Communications
|
various
|
Dekra Testing and Certification
|
various
|
Name |
S**** H******
|
various
|
V****** W****
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
No. 5-22, Ruishukeng, Linkou District
|
various
|
Columbia, South Carolina 29210
|
various
|
Columbia, 29210
|
various
|
Columbia, Virginia 29210
|
various
|
New Taipei City, 24451
|
various
|
United States
|
various
|
Taiwan
|
various
|
Telephone Number |
+1803********
|
various
|
80321********
|
various
|
88622******** Extension:
|
various
|
Fax Number |
80321********
|
various
|
88622********
|
various
|
80321********
|
various
|
E-mail |
s******@Intel.com
|
various
|
V******@dekra.com
|
various
|
S******@Intel.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/06/2019 |
various | 11/06/2018 |
various | 09/09/2018 |
various | 04/18/2018 |
various | 03/18/2018 |
various | 01/01/2018 |
various | 05/15/2017 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DXT - Part 15 Low Power Transceiver, Rx Verified |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Tri-Band Wireless-AC 18265 |
various | Intel Tri Band Wireless-AC 18265 |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Yes |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host 12 inch tablet PC, Dell model number - P29S, with antenna WNC part no 81EAA515.G74 Tx1) and 81EAA515.G72 (Tx2) and Intel Gigabit antenna part no 10101RRFW (RFEM 3).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements
according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration,
enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host 12 inch tablet PC, Dell model number - P29S, with antenna WNC part no 81EAA515.G74 Tx1) and 81EAA515.G72 (Tx2) and Intel Gigabit antenna part no 10101RRFW (RFEM 3).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host 12 inch tablet PC, Dell model number - P29S, with antenna WNC part no 81EAA515.G74 Tx1)
and 81EAA515.G72 (Tx2) and Intel Gigabit antenna part no 10101RRFW (RFEM 3).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power listed is conducted. Highest EIRP with 12.3dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.
This change establishes portable category RF exposure compliance conditions for the host PC Dell Model P29S. Antenna - Gigabit antenna model 10101RRFW - RFEM 3. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested
with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End
users and installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.54W/kg
respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number P29S, with antenna WNC part no 81EAA515.G74 Tx1 and 81EAA515.G72 Tx2.
Antenna is of same type and lower gain from original approval. SAR testing was
performed to demonstrate RF compliance. |
various | Power listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.
This change establishes portable category RF exposure compliance conditions for the host PC Dell Model P29S. Antenna - Gigabit antenna model 10101RRFW - RFEM 3. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations
to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.56W/kg and 1.54W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number P29S, with antenna WNC part no 81EAA515.G74 Tx1 and 81EAA515.G72 Tx2.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this
device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO
configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions
and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg
and 1.54W/kg respectively.
This change is to request approval for portable category specific host tablet PC, Dell model number P29S, with antenna WNC part no 81EAA515.G74 Tx1 and 81EAA515.G72 Tx2.
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.
This change establishes portable category RF exposure compliance conditions for the host PC Dell Model P73G, aluminum and carbon fiber chassis. Antenna - Gigabit antenna model 10101RRFW - RFEM 3. |
various | Power listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W.
This device is allowed only for OEM integration into host products. Consumer or end-user installation
is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter
product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter
must not transmit simultaneously with any other antenna or transmitter, except in accordance with
FCC multi-transmitter product procedures. Grantee must provide installation and operating
instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested
with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with transmitter operating conditions for satisfying RF exposure
compliance. The highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.57W/kg
respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed.
Dell model T17G, Antennas: Ethertronics Main(5002680) & Aux (5002680).
Antenna is of same type and lower gain from original approval. SAR testing was performed to
demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the
device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to published KDB
616217 Supplement documentation. When all conditions of this filing cannot be met installation of this
device into specific final products may require the submission of a permissive change application,
containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO
configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as
described in this filing. OEM/Host integrator must be provided with antenna installation instructions
and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is
responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.83W/kg
and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T17G, Antennas: Ethertronics Main(5002680) & Aux (5002680).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations
to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.51W/kg and 1.57W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T17G, Antennas: Ethertronics Main(5002680) & Aux (5002680).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF
exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible
for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T02J, Antennas: Auden Main(A30714-30) & Aux (A30713-30). HongBo Main (260-24154) & Aux (260-24155).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be
met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 1.29W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed. Dell model T02J, Antennas: Auden Main(A30714-30) & Aux (A30713-30). HongBo Main (260-24154) & Aux (260-24155).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.51W/kg respectively.
This change establishes portable category SAR conditions for the host platform and antennas listed.
Dell model T02J, Antennas: Auden Main(A30714-30) & Aux (A30713-30). HongBo Main (260-24154) & Aux (260-24155).
Antenna is of same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of a new antenna type, slot antenna antenna, which is different than the original application. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of a new antenna type, slot antenna antenna, which is different than the original application. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used in mobile configurations.
Addition of a new antenna type, slot antenna antenna, which is different than the original application. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures in a mobile/portable configuration. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific
final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest
reported Body and Simultaneous SAR values are 0.67W/kg and 1.32W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.54W/kg and 1.32W/kg respectively. |
various | Power listed is conducted. Highest EIRP with 12.3 dBi antenna described in the application is 0.205W. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this device must used in accordance with FCC multi-transmitter product procedures. End-users and OEM installers must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s)tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.32W/kg respectively. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Intel Corporation S.A.S.
|
various
|
Intel Mobile Commmunications France S.A.S.
|
various
|
Name |
N******** A******
|
various
|
N******** A****
|
various
|
Telephone Number |
00334********
|
various
|
00334********
|
various
|
Fax Number |
00334********
|
various
|
E-mail |
n******@intel.com
|
|