app
s
|
Applicant Information
|
|
various
|
Effective |
2017-01-05
|
various
|
2016-10-18
|
various
|
2016-04-19
|
various
|
2016-04-07
|
various
|
2016-03-18
|
various
|
2016-03-16
|
various
|
2015-12-14
|
various
|
2015-12-11
|
various
|
2015-12-10
|
various
|
2015-11-30
|
various
|
2015-11-10
|
various
|
2015-11-09
|
various
|
2015-10-20
|
various
|
2015-10-19
|
various
|
2015-10-17
|
various
|
2015-09-24
|
various
|
2015-09-22
|
various
|
2015-09-21
|
various
|
2015-09-14
|
various
|
2015-08-28
|
various
|
2015-08-17
|
various
|
2015-08-13
|
various
|
2015-07-20
|
various
|
2015-05-27
|
various
|
Applicant's complete, legal business name |
Intel Corporation
|
various
|
FCC Registration Number (FRN) |
0008035131
|
various
|
Physical Address |
100 Center Point Circle Suite 200
|
various
|
100 Center Point Circle
|
various
|
Columbia, SC
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
H******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
PD9
|
various
|
Equipment Product Code |
8260NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
S******** C******** H****
|
various
|
Title |
Product Regulations Engineer
|
various
|
Telephone Number |
803-3********
|
various
|
Fax Number |
803-2********
|
various
|
E-mail |
s******@intel.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
QuieTek Corp.
|
various
|
RF Exposure Lab
|
various
|
Intel Mobile Communications
|
various
|
Name |
V******** W********
|
various
|
J****** M********
|
various
|
M**** C****
|
various
|
S******** H******
|
various
|
Physical Address |
No. 159, Sec. 2, Wenhua 1st Rd. Linkou Dist.
|
various
|
802 N. Twin Oaks Valley Rd. Suite 105
|
various
|
No. 5-22, Rueishu Keng, Linkou Dist.
|
various
|
100 Center Point Circle Suite 200
|
various
|
New Taipei City, 24457
|
various
|
San Marcos, 92069
|
various
|
New Taipei City, 24451
|
various
|
San Marcos, California 92069
|
various
|
Columbia, South Carolina 29210
|
various
|
Columbia, 29210
|
various
|
Taiwan
|
various
|
United States
|
various
|
Telephone Number |
88622******** Extension:
|
various
|
88622********
|
various
|
76047********
|
various
|
88628******** Extension:
|
various
|
80321********
|
various
|
Fax Number |
88622********
|
various
|
76047********
|
various
|
88628********
|
various
|
80321********
|
various
|
80321********
|
various
|
E-mail |
v******@quietek.com
|
various
|
i******@rfexposurelab.com
|
various
|
m******@quietek.com
|
various
|
S******@Intel.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/04/2017 |
various | 04/16/2017 |
various | 10/16/2016 |
various | 10/03/2016 |
various | 09/14/2016 |
various | 09/12/2016 |
various | 06/11/2016 |
various | 06/08/2016 |
various | 06/07/2016 |
various | 05/28/2016 |
various | 05/08/2016 |
various | 05/07/2016 |
various | 04/17/2016 |
various | 04/14/2016 |
various | 03/22/2016 |
various | 03/20/2016 |
various | 03/19/2016 |
various | 03/18/2016 |
various | 03/12/2016 |
various | 02/23/2016 |
various | 02/14/2016 |
various | 02/08/2016 |
various | 01/13/2016 |
various | 11/23/2015 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | NII - Unlicensed National Information Infrastructure TX |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Dual Band Wireless-AC 8260 |
various | WLAN Module Adapter Card |
various | Wireless Network Adapter |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.59W/kg respectively.
The change filed under this application is the addition of new dipole type antenna, WIESON, (External). This antenna will be restricted to mobile category computers and stationary desktop computers. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.59W/kg respectively.
The change filed under this application is the addition of new dipole type antenna, WIESON, (External). This antenna will be restricted to mobile category computers and stationary desktop computers. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device
into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna
installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.59W/kg respectively.
The change filed under this application is the addition of new dipole type antenna, WIESON, (External). This antenna will be restricted to mobile category computers and stationary desktop computers. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. Highest reported Body and Simultaneous SAR values are 1.22W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad MIIX 510-12ISK, with antennas South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad MIIX 510-12ISK, with antennas South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.37W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo ideapad MIIX 510-12ISK, with antennas South Star part no 64451202400010 (Tx1) & 64451202400020 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.55W/kg respectively.
The major change filed under this application is:
#1: Additional Chassis added, HP, model number: HSTNN-I68C.
#2: Reduce the Output power through firmware and SAR measurements were evaluated. (WiFi only, Bluetooth power is unchanged from original grant).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz
bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a
host product. Highest reported Body and Simultaneous SAR values are 1.44W/kg and 1.55W/kg respectively.
The major change filed under this application is: #1: Additional Chassis added, HP, model number: HSTNN-I68C. #2: Reduce the Output power through firmware and SAR measurements were evaluated. (WiFi only, Bluetooth power is unchanged from original grant).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth
operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.44W/kg and 1.55W/kg respectively.
The major change filed under this application is: #1: Additional Chassis added, HP, model number: HSTNN-I68C. #2: Reduce the Output power through firmware and SAR measurements were evaluated. (WiFi only, Bluetooth power is unchanged from original grant).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.35W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-11ISK, with antennas Honglin part no DC33001F000 (Tx1) & DC33001F010 (Tx2) and Speedwire part no DC33001F300 (Tx1) & DC33001F310 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-11ISK, with antennas Honglin part no DC33001F000 (Tx1) & DC33001F010 (Tx2) and Speedwire part no DC33001F300 (Tx1) & DC33001F310 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-11ISK, with antennas Honglin part no DC33001F000 (Tx1) & DC33001F010 (Tx2) and Speedwire part no DC33001F300 (Tx1) & DC33001F310 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.25W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-15ISK, with antennas Honglin part no 260-28057 (Tx1) and 260-28058 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.28W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-15ISK, with antennas Honglin part no 260-28057 (Tx1) and 260-28058 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.74W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-15ISK, with antennas Honglin part no 260-28057 (Tx1) and 260-28058 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO
configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.10W/kg and 1.52W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-14ISK, with antennas Honglin part no 260-28053 (Tx1) and 260-28054 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with
equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO
configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.90W/kg and 1.52W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-14ISK, with antennas Honglin part no 260-28053 (Tx1) and 260-28054 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.28W/kg and 1.52W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo Yoga 710-14ISK, with antennas Honglin part no 260-28053 (Tx1) and 260-28054 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.35W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : MIIX 700-12ISK, with antennas Amphenol part no DC33001EA20 (Tx1) & DC33001EA30 (Tx2) and Speedwire part no DC33001E910 (Tx1) & DC33001E900 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : MIIX 700-12ISK, with antennas Amphenol part no DC33001EA20 (Tx1) & DC33001EA30 (Tx2) and Speedwire part no DC33001E910 (Tx1) & DC33001E900 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.30W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : MIIX 700-12ISK, with antennas Amphenol part no DC33001EA20 (Tx1) & DC33001EA30 (Tx2) and Speedwire part no DC33001E910 (Tx1) & DC33001E900 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-I72C, with antennas ACON part no APP6Y-100002 (Tx1) and AAP6Y-100003 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.24W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-I72C, with antennas ACON part no APP6Y-100002 (Tx1) and AAP6Y-100003 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 0.72W/kg and 1.53W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-I72C, with antennas ACON part no APP6Y-100002 (Tx1) and AAP6Y-100003 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-Q99C, with antennas ACON part no ANP6Y-200008 (Tx1 & Tx2), Inpaq part no WA-P-LB-10-048 (Tx1 & Tx2) and WNC part no 81EAAR15.GGA (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.51W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-Q99C, with antennas ACON part no ANP6Y-200008 (Tx1 & Tx2), Inpaq part no WA-P-LB-10-048 (Tx1 & Tx2) and WNC part no 81EAAR15.GGA (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s)
with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the
instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.38W/kg and 1.46W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-Q99C, with antennas ACON part no ANP6Y-200008 (Tx1 & Tx2), Inpaq part no WA-P-LB-10-048 (Tx1 & Tx2) and WNC part no 81EAAR15.GGA (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.66W/kg and 1.19W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : TPN-Q157, with antennas WNC part no 81EAAR15.GBN (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.15W/kg and 1.19W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : TPN-Q157, with antennas WNC part no 81EAAR15.GBN (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.19W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : TPN-Q157, with antennas WNC part no 81EAAR15.GBN (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-C88C, with antennas ACON part no APP6Y-700010 (Tx1 & Tx2) and Yageo part no DC33001OF00 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-C88C, with antennas ACON part no APP6Y-700010 (Tx1 & Tx2) and Yageo part no DC33001OF00 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.13W/kg and 1.47W/kg respectively.
The change filed under this application is for frequency band 5725MHz - 5825MHz was previously authorized for this device under section 15.247 of the rules. This
permissive change demonstrates compliance with new UNII rules for this same frequency band under section 15.407. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.10W/kg and 1.47W/kg respectively.
This change is to request approval for portable category specific host notebook PC, HP model number : HSTNN-C88C, with antennas ACON part no APP6Y-700010 (Tx1 & Tx2) and Yageo part no DC33001OF00 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.12W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : TP00076B, with antennas Jiengtai part no 025.900AI.0011 (Tx1) & 025.900AJ.0011 (Tx2) and WNC part no 025.900AI.0001 (Tx1) & 025.900AJ.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 0.50W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : TP00076B, with antennas Jiengtai part no 025.900AI.0011 (Tx1) & 025.900AJ.0011 (Tx2) and WNC part no 025.900AI.0001 (Tx1) & 025.900AJ.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.01W/kg and 1.59W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : TP00076B, with antennas Jiengtai part no 025.900AI.0011 (Tx1) & 025.900AJ.0011 (Tx2) and WNC part no 025.900AI.0001 (Tx1) & 025.900AJ.0001 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 0.98W/kg and 1.26W/kg respectively.
This change is to request approval for portable category specific host notebook model number: Toshiba PT16A Series, with the following antennas: Acon. Part No. D-APP5P-GFC200 (TX1) and DAPP5P-GFC201 (TX2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.32W/kg and 1.26W/kg respectively.
This change is to request approval for portable category specific host notebook model number: Toshiba PT16A Series, with the following antennas: Acon. Part No. D-APP5P-GFC200 (TX1) and DAPP5P-GFC201 (TX2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.44W/kg and 1.26W/kg respectively.
This change is to request approval for portable category specific host notebook model number: Toshiba PT16A Series, with the following antennas: Acon. Part No. D-APP5P-GFC200 (TX1) and DAPP5P-GFC201 (TX2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 0.14W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Yoga 700-14ISK, with antennas Luxshare part no. DC33001D900 (Tx1) & DC33001D910 (Tx2) and Honglin part no DC33001DB00 (Tx1) & DC33001DB10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.04W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Yoga 700-14ISK, with antennas Luxshare part no. DC33001D900 (Tx1) & DC33001D910 (Tx2) and Honglin part no DC33001DB00 (Tx1) & DC33001DB10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.67W/kg and 1.25W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Yoga 700-14ISK, with antennas Luxshare part no. DC33001D900 (Tx1) & DC33001D910 (Tx2) and Honglin part no DC33001DB00 (Tx1) & DC33001DB10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according
to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with
antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 1.39W/kg and 0.02W/kg separation ratio respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Yoga 900-13ISK, with antennas Luxshare part no DC33001E000 (Tx1) & DC33001E010 (Tx2) and Honglin part no 260-28031 (Tx1) & 260-28032 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according
to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided
with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 1.35W/kg and 0.02W/kg separation ratio respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Yoga 900-13ISK, with antennas Luxshare part no DC33001E000 (Tx1) & DC33001E010 (Tx2) and Honglin part no 260-28031 (Tx1) & 260-28032 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.48W/kg and 0.02W/kg separation ratio respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Yoga 900-13ISK, with antennas Luxshare part no DC33001E000 (Tx1) & DC33001E010 (Tx2) and Honglin part no 260-28031 (Tx1) & 260-28032 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate
into a host product. Highest reported Body and Simultaneous SAR values are 0.37W/kg and 0.65W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Y700-15, with antennas Speedwire part no DC33001DU00 (Tx1) & DC33001DU10 (Tx2) and Yageo part no DC33001DX00 (Tx1) & DC33001DX10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according
to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 2.4GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.35W/kg and 0.65W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Y700-15, with antennas Speedwire part no DC33001DU00 (Tx1) & DC33001DU10 (Tx2) and Yageo part no DC33001DX00 (Tx1) & DC33001DX10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.08W/kg and 0.65W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Y700-15, with antennas Speedwire part no DC33001DU00 (Tx1) & DC33001DU10 (Tx2) and Yageo part no DC33001DX00 (Tx1) & DC33001DX10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.29W/kg and 0.52W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Y700-17, with antennas Speedwire part no DC33001DV00 (Tx1) & DC33001DV10 (Tx2) and Yageo part no DC33001DW00 (Tx1) & C33001DW10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to
integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.25W/kg and 0.52W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Y700-17, with antennas Speedwire part no DC33001DV00 (Tx1) & DC33001DV10 (Tx2) and Yageo part no DC33001DW00 (Tx1) & C33001DW10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.06W/kg and 0.52W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Y700-17, with antennas Speedwire part no DC33001DV00 (Tx1) & DC33001DV10 (Tx2) and Yageo part no DC33001DW00 (Tx1) & C33001DW10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.36W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo TP00079A PC, with antennas HighTek part no 025.900DS.0011 (Tx1 & Tx2), and Jiengtai part no 025.900DS.0001 (Tx1 & Tx2) and Jiengtai part no 025.900EV.0001 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo TP00079A PC, with antennas HighTek part no 025.900DS.0011 (Tx1 & Tx2), and Jiengtai part no 025.900DS.0001 (Tx1 & Tx2) and Jiengtai part no 025.900EV.0001 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.19W/kg and 1.55W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo TP00079A PC, with antennas HighTek part no 025.900DS.0011 (Tx1 & Tx2), and Jiengtai part no 025.900DS.0001 (Tx1 & Tx2) and Jiengtai part no 025.900EV.0001 (Tx1 & Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the
submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz
bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into
a host product. Highest reported Body SAR value is 1.20W/kg.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo TP00078A PC, with antennas Ethertronics part no 5002022 (Tx1) & 5002030 (Tx2) and HighTek part no DC33001RQ00 (Tx1) & DC33001RQ10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body SAR value is 0.06W/kg.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo TP00078A PC, with antennas Ethertronics part no 5002022 (Tx1) & 5002030 (Tx2) and HighTek part no DC33001RQ00 (Tx1) & DC33001RQ10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body SAR value is 0.44W/kg.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : Lenovo TP00078A PC, with antennas Ethertronics part no 5002022 (Tx1) & 5002030 (Tx2) and HighTek part no DC33001RQ00 (Tx1) & DC33001RQ10 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are 0.21W/kg and 1.28W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : EDGE 2-1580, with antennas HighTek and Yageo part no 025.900CG.0011 (Tx1) & 025.900CH.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 1.07W/kg and 1.28W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : EDGE 2-1580, with antennas HighTek and Yageo part no 025.900CG.0011 (Tx1) & 025.900CH.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with
OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require
the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are 0.46W/kg and 1.28W/kg respectively.
This change is to request approval for portable category specific host notebook PC, Lenovo model number : EDGE 2-1580, with antennas HighTek and Yageo part no 025.900CG.0011 (Tx1) & 025.900CH.0011 (Tx2).
Antenna is of the same type and lower gain from original approval. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.41W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrator's must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.39W/kg and 1.41W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.41W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 8mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB 616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure
compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.78W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate
data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to
satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.79W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.53W/kg respectively.
To establish conditions based on modular stand-alone SAR evaluation to establish minimum 5mm antenna to user separation distance at a maximum SAR value <0.8W/kg(1g) for mixed mobile/portable conditions according to KDB 447498 D01 General RF Exposure Guidance v05 and KDB616217 D04 for Laptop and Tablets v01. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multitransmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2
MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.72W/kg and 1.41W/kg respectively.
This change establishes portable category modular SAR conditions at 14mm minimum separation distance of antennas to users based on maximum SAR value of 0.725W/kg (1g). |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Highest reported Body and Simultaneous SAR values are: 0.01W/kg and 1.41W/kg respectively.
This change establishes portable category modular SAR conditions at
14mm minimum separation distance of antennas to users based on maximum SAR
value of 1.41W/kg (1g). |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be use except in accordance with FCC multi-transmitter
product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Highest reported Body and Simultaneous SAR values are: 0.45W/kg and 1.41W/kg respectively.
This change establishes portable category modular SAR conditions at
14mm minimum separation distance of antennas to users based on maximum SAR
value of 0.45W/kg (1g).
The next change is to update the filing for compliance data for 802.11 bgn, channel 13 (2472MHz) and 11F (2462MHz). These channels are supported by passive scanning only. Previous test software versión was not capable of supporting output values < 0dBm. Updated test software now enables transmission at low power to demonstrate compliance. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with transmitter operating conditions for satisfying
RF exposure compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band and has 20, 40 and 80MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be used in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing
cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing. OEM/Host integrators must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for
complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION Lin Kou Lab.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
V****** L****
|
various
|
S****** H********
|
various
|
Telephone Number |
88628******** Extension:
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
88628********
|
various
|
886-2********
|
various
|
E-mail |
v******@dekra.com
|
various
|
s******@quietek.com
|
|