app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8 9
|
Effective |
2022-09-19
|
1 2 3 4 5 6 7 8 9
|
2021-09-27
|
1 2 3 4 5 6 7 8 9
|
2021-05-11
|
1 2 3 4 5 6 7 8 9
|
2021-03-18
|
1 2 3 4 5 6 7 8 9
|
Applicant's complete, legal business name |
Intel Corporation
|
1 2 3 4 5 6 7 8 9
|
FCC Registration Number (FRN) |
0008035131
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
100 Center Point Circle Suite 200
|
1 2 3 4 5 6 7 8 9
|
100 Center Point Circle
|
1 2 3 4 5 6 7 8 9
|
Columbia, SC
|
1 2 3 4 5 6 7 8 9
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8 9
|
TCB Application Email Address |
h******@acbcert.com
|
1 2 3 4 5 6 7 8 9
|
h******@ACBcert.com
|
1 2 3 4 5 6 7 8 9
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8 9
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8 9
|
Grantee Code |
PD9
|
1 2 3 4 5 6 7 8 9
|
Equipment Product Code |
AX211D2L
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8 9
|
Name |
S******** C******** H****
|
1 2 3 4 5 6 7 8 9
|
Title |
Product Regulations Engineer
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
803-3********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
803-2********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
s******@intel.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
Intel Mobile Communications
|
1 2 3 4 5 6 7 8 9
|
RF Exposure Lab
|
1 2 3 4 5 6 7 8 9
|
Intel Corporation
|
1 2 3 4 5 6 7 8 9
|
Name |
S**** C****** H******
|
1 2 3 4 5 6 7 8 9
|
J******** M******
|
1 2 3 4 5 6 7 8 9
|
S****** H****
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
100 Center Point Circle
|
1 2 3 4 5 6 7 8 9
|
802 North Twin Oaks Valley Rd. Suite 105
|
1 2 3 4 5 6 7 8 9
|
Columbia, 29212
|
1 2 3 4 5 6 7 8 9
|
San Marcos, California 92069
|
1 2 3 4 5 6 7 8 9
|
Columbia, 29210
|
1 2 3 4 5 6 7 8 9
|
Columbia, South Carolina 29210
|
1 2 3 4 5 6 7 8 9
|
United States
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
80321********
|
1 2 3 4 5 6 7 8 9
|
76047********
|
1 2 3 4 5 6 7 8 9
|
80331********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
s******@intel.com
|
1 2 3 4 5 6 7 8 9
|
i******@rfexposurelab.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
Intel Corporation
|
1 2 3 4 5 6 7 8 9
|
Name |
G******** C********
|
1 2 3 4 5 6 7 8 9
|
Physical Address |
425 rue de Goa
|
1 2 3 4 5 6 7 8 9
|
Antibes, 06600
|
1 2 3 4 5 6 7 8 9
|
France
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
+3349********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
g******@intel.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 9 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 7 8 9 | Yes |
1 2 3 4 5 6 7 8 9 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 4 5 6 7 8 9 | Yes |
1 2 3 4 5 6 7 8 9 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/26/2022 |
1 2 3 4 5 6 7 8 9 | 11/07/2021 |
1 2 3 4 5 6 7 8 9 | 09/14/2021 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 9 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 9 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 9 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 9 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 9 | 6XD - 15E 6 GHz Low Power Indoor Client |
1 2 3 4 5 6 7 8 9 | JBP - Part 15 Class B Computing Device Peripheral |
1 2 3 4 5 6 7 8 9 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Intel Wi-Fi 6E AX211 |
1 2 3 4 5 6 7 8 9 | Intel Wi-Fi 6 AX211 |
1 2 3 4 5 6 7 8 9 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 3 4 5 6 7 8 9 | No |
1 2 3 4 5 6 7 8 9 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 7 8 9 | Does not apply |
1 2 3 4 5 6 7 8 9 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 7 8 9 | Original Equipment |
1 2 3 4 5 6 7 8 9 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 9 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 9 | Grant Comments | Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 Band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must
not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter
product procedures. Grantee must provide installation and operating instructions for complying
with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar
antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be
provided with transmitter operating conditions for satisfying RF exposure compliance. This filing meets
MPE requirements of KDB447498 and can be used in mobile configurations.
This change is to request approval for mobile category specific modular approval, with dipole antenna
Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2).
MPE testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper
bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multi-transmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable
configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable
host configurations to ensure RF exposure compliance, including simultaneous transmission SAR
requirements according to published KDB 616217 Supplement documentation. When all conditions of this
filing cannot be met installation of this device into specific final products may require the submission of a
permissive change application, containing appropriate data demonstrating compliance,or a new application.
OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO
configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they
choose to integrate into a host product. This filing meets MPE requirements of KDB447498 and can be used
in mobile configurations.
This change is to request approval for mobile category specific modular approval, with dipole antenna
Wieson part no ARY121-0009-002-H0 (Tx1 and Tx2).
MPE testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously
with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must
provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is
approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or
lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host
configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to
published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into
specific final products may require the submission of a permissive change application, containing appropriate data
demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in
this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations
as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating
conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and
requirements for each transmitter they choose to integrate into a host product. This filing meets MPE requirements of
KDB447498 and can be used in mobile configurations.
This change is to request approval for mobile category specific modular approval, with dipole antenna Wieson part no
ARY121-0009-002-H0 (Tx1 and Tx2).
MPE testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.26 W/kg and 0.52 W/kg respectively.
This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 15mm minimum test separation distance.
Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not
transmit simultaneously with any other antenna or transmitter, except in accordance with FCC
multitransmitter product procedures. Grantee must provide installation and operating instructions for
complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.53W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product
procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or
similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM
integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous
transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of
this filing cannot be met installation of this device into specific final products may require the submission of a permissive
change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has
20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must
be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.76W/kg and 1.53W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge
channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit
simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product
procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with
the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must
coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance,
including simultaneous transmission SAR requirements according to published KDB 616217 Supplement
documentation. When all conditions of this filing cannot be met installation of this device into specific final products
may require the submission of a permissive change application, containing appropriate data demonstrating
compliance,or a new application. OEM/Host integrator must be provided with antenna installation instructions and
transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2
MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host
integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45W/kg and 1.53W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 15mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
1 2 3 4 5 6 7 8 9 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 9 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8 9
|
Firm Name |
Intel Corporation S.A.S.
|
1 2 3 4 5 6 7 8 9
|
Name |
N**** A********
|
1 2 3 4 5 6 7 8 9
|
Telephone Number |
00334********
|
1 2 3 4 5 6 7 8 9
|
00334********
|
1 2 3 4 5 6 7 8 9
|
Fax Number |
00334********
|
1 2 3 4 5 6 7 8 9
|
E-mail |
n******@intel.com
|
|