app
s
|
Applicant Information
|
|
1 2
|
Effective |
2018-04-27
|
1 2
|
Applicant's complete, legal business name |
SMART Technologies Inc.
|
1 2
|
FCC Registration Number (FRN) |
0006983860
|
1 2
|
Physical Address |
3636 Research Road NW
|
1 2
|
Calgary, N/A T2L 1Y1
|
1 2
|
Canada
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
T******@intertek.com
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
QCI
|
1 2
|
Equipment Product Code |
IDXMOD1
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
J**** H********
|
1 2
|
Title |
Manager, Hardware Development
|
1 2
|
Telephone Number |
40340********
|
1 2
|
Fax Number |
40322********
|
1 2
|
E-mail |
j******@smarttech.com
|
|
app
s
|
Technical Contact
|
1 2
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
1 2
|
Name |
B****** L****
|
1 2
|
Physical Address |
16/F, Block A, Building 6, Baoneng Science and Tec
|
1 2
|
Shenzhen, 518109
|
1 2
|
China
|
1 2
|
Telephone Number |
0755-******** Extension:
|
1 2
|
Fax Number |
0755-********
|
1 2
|
E-mail |
b******@uttlab.com
|
|
app
s
|
Non Technical Contact
|
1 2
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
1 2
|
Name |
B****** L****
|
1 2
|
Physical Address |
16/F, Block A, Building 6, Baoneng Science and Tec
|
1 2
|
Shenzhen, 518109
|
1 2
|
China
|
1 2
|
Telephone Number |
0755-******** Extension:
|
1 2
|
Fax Number |
0755-********
|
1 2
|
E-mail |
b******@uttlab.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIFI Module |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Single Modular Approval |
1 2 | Purpose / Application is for | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Modular Approval. Power Output listed is Conducted. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain
may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4G WLAN transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 14-30 as a Client only without Radar Detection. |
1 2 | Modular Approval. Power Output listed is Conducted. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz and 40 MHz bandwidth modes and it contains 5G WLAN transmitter. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
Shenzhen UnionTrust Quality and Technology Co., Lt
|
1 2
|
Name |
G****** L******
|
1 2
|
Telephone Number |
+86-7********
|
1 2
|
E-mail |
q******@uttlab.com
|
|