app
s
|
Applicant Information
|
|
1 2
|
Effective |
2019-09-26
|
1 2
|
Applicant's complete, legal business name |
Silicon Laboratories Finland Oy
|
1 2
|
FCC Registration Number (FRN) |
0007782659
|
1 2
|
Physical Address |
Alberga Business Park, Bertel Jungin aukio 3
|
1 2
|
Espoo
|
1 2
|
Finland
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
c******@nacsemc.com
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
QOQ
|
1 2
|
Equipment Product Code |
GM210P
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
P****** R********
|
1 2
|
Title |
Staff HW Engineer
|
1 2
|
Telephone Number |
+3589********
|
1 2
|
Fax Number |
+3589********
|
1 2
|
E-mail |
p******@silabs.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 | DTS - Digital Transmission System |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Low Energy and ZigBee wireless radio modules |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 | Modular Equipment Type | Single Modular Approval |
1 2 | Purpose / Application is for | Original Equipment |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 | Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
1 2
|
Name |
E**** L******
|
1 2
|
Telephone Number |
+886-********
|
1 2
|
Fax Number |
+886-********
|
1 2
|
E-mail |
e******@tw.bureauveritas.com
|
|