app
s
|
Applicant Information
|
|
1 2 3 4 5
|
Effective |
2014-06-09
|
1 2 3 4 5
|
2013-12-17
|
1 2 3 4 5
|
2013-05-17
|
1 2 3 4 5
|
2011-12-13
|
1 2 3 4 5
|
2011-09-30
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Silicon Laboratories Finland Oy
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0007782659
|
1 2 3 4 5
|
Physical Address |
Alberga Business Park, Bertel Jungin aukio 3
|
1 2 3 4 5
|
Espoo, N/A 02600
|
1 2 3 4 5
|
Finland
|
|
app
s
|
TCB Information
|
1 2 3 4 5
|
TCB Application Email Address |
V******@babt.com
|
1 2 3 4 5
|
h******@acbcert.com
|
1 2 3 4 5
|
c******@curtis-straus.com
|
1 2 3 4 5
|
h******@atcb.com
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3 4 5
|
Grantee Code |
QOQ
|
1 2 3 4 5
|
Equipment Product Code |
WT41E
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5
|
Name |
P**** R****
|
1 2 3 4 5
|
Title |
Staff HW Engineer
|
1 2 3 4 5
|
Telephone Number |
+3589********
|
1 2 3 4 5
|
Fax Number |
+3589********
|
1 2 3 4 5
|
E-mail |
p******@silabs.com
|
|
app
s
|
Technical Contact
|
1 2 3 4 5
|
Firm Name |
Bluegiga
|
1 2 3 4 5
|
Bluegiga Technologies Oy
|
1 2 3 4 5
|
Handheld Groupt AB
|
1 2 3 4 5
|
Name |
P****** R********
|
1 2 3 4 5
|
M******** Z********
|
1 2 3 4 5
|
Physical Address |
Sinikalliontie 5A
|
1 2 3 4 5
|
456 SW Monroe Ave
|
1 2 3 4 5
|
120
|
1 2 3 4 5
|
Espoo, 02630
|
1 2 3 4 5
|
Corvallis, Oregon 97333
|
1 2 3 4 5
|
Finland
|
1 2 3 4 5
|
United States
|
1 2 3 4 5
|
Telephone Number |
+3584********
|
1 2 3 4 5
|
1 541********
|
1 2 3 4 5
|
Fax Number |
1 541********
|
1 2 3 4 5
|
E-mail |
p******@bluegiga.com
|
1 2 3 4 5
|
m******@handheldgroup.com
|
|
app
s
|
Non Technical Contact
|
1 2 3 4 5
|
Firm Name |
Bluegiga Technologies Oy
|
1 2 3 4 5
|
Handheld Groupt AB
|
1 2 3 4 5
|
Name |
P****** R******
|
1 2 3 4 5
|
M******** Z****
|
1 2 3 4 5
|
Physical Address |
Sinikalliontie 5A
|
1 2 3 4 5
|
456 SW Monroe Ave
|
1 2 3 4 5
|
120
|
1 2 3 4 5
|
Espoo, 02630
|
1 2 3 4 5
|
Corvallis, Oregon 97333
|
1 2 3 4 5
|
Finland
|
1 2 3 4 5
|
United States
|
1 2 3 4 5
|
Telephone Number |
+3584********
|
1 2 3 4 5
|
1 541********
|
1 2 3 4 5
|
Fax Number |
1 541********
|
1 2 3 4 5
|
E-mail |
p******@bluegiga.com
|
1 2 3 4 5
|
m******@handheldgroup.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 | No |
1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Module |
1 2 3 4 5 | Bluetooth Module WT41-E |
1 2 3 4 5 | WT41 long range class 1, Bluetooth 2.1 + EDR module |
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 4 5 | Original Equipment |
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 | Grant Comments | C2PC as described in this filing. Power Output listed is Conducted. Modular Approval.
This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Power Output listed is Conducted. Modular Approval.
This device is granted for use in mixed mobile and portable RF Exposure conditions. This transmitter must be installed to provide a separation distance of at least 21 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. The end user must not have instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change to add new antenna. |
1 2 3 4 5 | Power output listed is conducted. Single Modular Approval for mixed mobile and portable RF Exposure conditions, this transmitter must be installed to provide a separation distance of at least 21 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change to allow portable use. |
1 2 3 4 5 | Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Class II Permissive Change for adding tablet host FCC ID: YY3-017LRBT. |
1 2 3 4 5 | Power Output listed is Conducted. Modular Approval.
This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5
|
Firm Name |
A Test Lab Techno Corp.
|
1 2 3 4 5
|
Emitel AG
|
1 2 3 4 5
|
EMC Technologies Pty. Ltd.
|
1 2 3 4 5
|
SGS Fimko Oy
|
1 2 3 4 5
|
Name |
J**** L******
|
1 2 3 4 5
|
D****** F********
|
1 2 3 4 5
|
C****** Z******
|
1 2 3 4 5
|
J******** M********
|
1 2 3 4 5
|
Telephone Number |
886-3********
|
1 2 3 4 5
|
0049-********
|
1 2 3 4 5
|
61393********
|
1 2 3 4 5
|
61-3-********
|
1 2 3 4 5
|
358-9********
|
1 2 3 4 5
|
Fax Number |
886-3********
|
1 2 3 4 5
|
0049-********
|
1 2 3 4 5
|
61393********
|
1 2 3 4 5
|
61-3-********
|
1 2 3 4 5
|
358-9********
|
1 2 3 4 5
|
E-mail |
J******@atl-lab.com.tw
|
1 2 3 4 5
|
d******@emitel.de
|
1 2 3 4 5
|
c******@emctech.com.au
|
1 2 3 4 5
|
j******@sgs.com
|
|