app
s
|
Applicant Information
|
|
various
|
Effective |
2017-12-06
|
various
|
2017-01-26
|
various
|
2015-10-19
|
various
|
2015-08-19
|
various
|
2015-05-18
|
various
|
2015-05-15
|
various
|
2015-04-24
|
various
|
2015-03-05
|
various
|
2015-02-16
|
various
|
2014-11-20
|
various
|
2014-10-27
|
various
|
2014-10-20
|
various
|
2014-10-17
|
various
|
2014-10-09
|
various
|
2014-10-02
|
various
|
2014-09-16
|
various
|
2014-09-05
|
various
|
2014-08-29
|
various
|
2014-08-21
|
various
|
2014-08-04
|
various
|
2014-07-09
|
various
|
2014-07-01
|
various
|
2014-05-14
|
various
|
Applicant's complete, legal business name |
Realtek Semiconductor Corp.
|
various
|
FCC Registration Number (FRN) |
0020109807
|
various
|
Physical Address |
No. 2 Innovation Road II, Hsinchu Science Park
|
various
|
No. 2
|
various
|
Hsinchu
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
various
|
V******@tuvam.com
|
various
|
c******@telefication.com
|
various
|
c******@curtis-straus.com
|
various
|
L******@ul.com
|
various
|
K******@phoenix-testlab.de
|
various
|
b******@phoenix-testlab.de
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
TX2
|
various
|
Equipment Product Code |
RTL8723BS
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
D**** L****
|
various
|
Title |
Project Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
d******@realtek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Compliance Certification Services
|
various
|
QuieTek Corporation
|
various
|
SGS Taiwan Ltd.
|
various
|
Cerpass Technology Corporation
|
various
|
Name |
J******** F****
|
various
|
M******** C********
|
various
|
W**** C********
|
various
|
M******** C********
|
various
|
Physical Address |
No. 10, Weiye Rd, Innovation Park
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
134, Wu Kung Rd., Wuku Industrial Zone
|
various
|
No.66,Tangzhuang Road
|
various
|
No.5-22, Rueishu Keng, Linkou Dist.
|
various
|
China
|
various
|
Taiwan
|
various
|
Telephone Number |
86-51********
|
various
|
886-2********
|
various
|
88622********
|
various
|
886-2******** Extension:
|
various
|
86-51********
|
various
|
Fax Number |
86-51********
|
various
|
886-2********
|
various
|
88622********
|
various
|
86-51********
|
various
|
E-mail |
j******@ccsrf.com
|
various
|
m******@quietek.com
|
various
|
W******@sgs.com
|
various
|
m******@cerpass.net
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Compliance Certification Services
|
various
|
QuieTek Corporation
|
various
|
SGS Taiwan Ltd.
|
various
|
Cerpass Technology Corporation
|
various
|
Name |
L**** W****
|
various
|
M******** C******
|
various
|
W******** C******
|
various
|
M******** C******
|
various
|
M**** C******
|
various
|
Physical Address |
No. 10, Weiye Rd, Innovation Park
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
134, Wu Kung Rd., Wuku Industrial Zone
|
various
|
No.66,Tangzhuang Road
|
various
|
No.5-22, Rueishu Keng, Linkou Dist.
|
various
|
China
|
various
|
Taiwan
|
various
|
Telephone Number |
86-51********
|
various
|
886-2********
|
various
|
88622********
|
various
|
886-2******** Extension:
|
various
|
86-51********
|
various
|
Fax Number |
86-51********
|
various
|
886-2********
|
various
|
88622********
|
various
|
86-51********
|
various
|
E-mail |
l******@ccsrf.com
|
various
|
m******@quietek.com
|
various
|
W******@sgs.com
|
various
|
m******@cerpass.net
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/25/2017 |
various | 10/03/2015 |
various | 11/10/2015 |
various | 04/01/2015 |
various | 11/23/2014 |
various | 02/25/2015 |
various | 11/11/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11b/g/n RTL8723BS Combo module |
various | 802.11b/g/n RTL8723BS Combo Module |
various | Tablet PC and Docking |
various | 802.11b/g/n RTL8723BE Combo module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Limited Single Modular Approval |
various | Does not apply |
various | Purpose / Application is for | Class II Permissive Change |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20-cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20 and 40 MHz mode.
Class II Permissive Change. This device added an additional antenna as shown in this filing. User installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user. |
various | Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20-cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change. This device added an additional antenna as shown in this filing. User installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user. |
various | Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20-cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20 and 40 MHz mode.
Class II Permissive Change. This device and associated FCC ID label are to be installed in the UNICOM Embedded Fanless PC, Models U-BPCIB000 and U-BPCIB001, as shown in this filing, only by OEM or OEM integrators. User installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user. |
various | Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: EG20BA2, EG20BI2, EG20Bxx x can be 0 to 9, A to Z, blank or -) shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user. |
various | Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: EG20BA2, EG20BI2, EG20Bxx x can be 0 to 9, A to Z, blank or - )shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of the module may not be provided to the end user. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change is for implementation in a portable platform from Lenovo(Model Number: Lenovo ideapad 100S-11IBY******; 80R2******, where '*' can be '0' - '9', 'A' - 'Z', 'a' - 'z' or blank).
The highest reported SAR for simultaneous transmission exposure condition is 0.2 W/kg. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change is for implementation in a portable platform from Lenovo(Model Number: Lenovo ideapad 100S-11IBY******; 80R2******, where '*' can be '0' - '9', 'A' - 'Z', 'a' - 'z' or blank).
The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are < 0.1 W/kg and 0.2 W/kg, respectively. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in new host, tablet PC(Model number :TC69RA3).The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new host, tablet PC(Model number :TC69RA3). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in new host TPN-I12, Notebook computer from hp with new antenna. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.605 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new host TPN-I12, Notebook computer from hp with new antenna. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in Notebook PC(Model number: EF20RAX) from Realtek. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in Notebook PC(Model number: EF20RAX) from Realtek. |
various | Single Modular. Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: TP10RA1, TI10RA1, TX10RXX( X can be 0 to 9, A to Z, blank or - ) shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. |
various | Single Modular. Output power listed is conducted. This OEM module is approved for use in products operation as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified herein. This device and its antenna(s) must operate with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode.
C2PC. This device and associated FCC ID label are to be installed in the specific Tablet PC with model number: TP10RA1, TI10RA1, TX10RXX( X can be 0 to 9, A to Z, blank or - ) shown in this filing only by OEM or OEM integrators user installation is prohibited. Instructions on the installation and/or removal of this module may not be provided to the end user. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. The highest reported SAR value is 1.45 W/kg. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in new host TR69RA3 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new host TR69RA3 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Change for implementation in new host, tablet PCs (Model number : TW802, TW80xxxx(x=0~9, A~Z or blank or "-")). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device has 20/40 MHz bandwidth modes.
Class II Change: This Change for implementation in new host, tablet PCs( TW802, TW80xxxx(x=0~9, A~Z or blank or "-")). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.32 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device has 20/40 MHz bandwidth modes.
Class II Change: This Change for implementation in new host, tablet PCs(Model number : TW70CA1). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.04 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Change for implementation in new host, tablet PCs (Model number : TW70CA1). |
various | Class II Permissive for adding a portable host, ECS ELITEGROUP Model: TC97RA1, TC97Rxx (x=0~9, A~Z,a~z or blank or "-").
Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive for adding a portable host, ECS ELITEGROUP Model: TC97RA1, TC97Rxx (x=0~9, A~Z,a~z or blank or "-"). The highest reported SAR value for body-worn use condition is 0.06 W/kg.
Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Change for implementation in new host, tablet PCs (Model number : TC69RA1). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device has 20/40 MHz bandwidth modes.
Class II Change: This Change for implementation in new host, tablet PCs(Model number : TC69RA1). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.88 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in new hosts, tablet PCs from Lenovo. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.29 W/kg (Body).
The model numbers of tablet PCs are Lenovo MIIX 3-1030XXXXXX, 20458XXXXXX, 80HVXXXXXX.("X" in the model name can be alphanumeric characters, "-" or blank) |
various | Class II permissive change filing for the specific combination of portable tablet host (Dell/T01D002) and antenna as documented in this filing.
Output power listed is conducted. This OEM module is approved for use in
products operating as mobile transmitting device. The only antennas approved for
use with this module are those documented in the filing, and must be installed in
the manner specified therein. This device and its antenna(s) must operate with a
separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter. Grantee shall
provide installation and operating instructions for satisfying RF exposure
requirements to OEM integrators and installers. This grant is valid only when the
device is sold to OEM integrators and the OEM integrators are instructed to
ensure that the end user has no manual instructions to remove or install the
device. This device supports 802.11n, 20MHz and 40MHz mode.
The highest SAR value for all filings under this FCC ID is 1.42 W/kg.
The highest reported SAR value under this filing is 0.80 W/Kg. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new hosts, tablet PCs from Lenovo.
The model numbers of tablet PCs are Lenovo MIIX 3-1030XXXXXX, 20458XXXXXX, 80HVXXXXXX.("X" in the model name can be alphanumeric characters, "-" or blank) |
various | Class II permissive change filing for the specific combination of portable tablet host (Dell/T01D002) and antenna as documented in this filing.
Output power listed is conducted. This OEM module is approved for use in
products operating as mobile transmitting device. The only antennas approved for
use with this module are those documented in the filing, and must be installed in
the manner specified therein. This device and its antenna(s) must operate with a
separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter. Grantee shall
provide installation and operating instructions for satisfying RF exposure
requirements to OEM integrators and installers. This grant is valid only when the
device is sold to OEM integrators and the OEM integrators are instructed to
ensure that the end user has no manual instructions to remove or install the device. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device has 20/40 MHz bandwidth modes.
Class II Change: This Change for implementation in new host, tablet PC. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.28 W/kg (Body).
The model name of tablet PC is TL10REx.('x' can be '0~9' or 'A~Z'.) |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for
use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Change for implementation in new host, tablet PC.
The model name of tablet PC is TL10REx.('x' can be '0~9' or 'A~Z'.) |
various | Class II Permissive for adding potable host, ECS ELITEGROUP Model: TC70RA5, TC70xxxx (x=0~9, A~Z,a~z or blank or "-"); MG070A2T-BT.
Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive for adding potable host, ECS ELITEGROUP Model: TC70RA5, TC70xxxx (x=0~9, A~Z,a~z or blank or "-"); MG070A2T-BT. The highest reported SAR value for body-worn use condition is 0.34 W/kg.
Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change for Implementation in new host TZ10II1 Tablet PC. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change for :
Implementation in new host TZ10II1 Tablet PC. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.34 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change for :
1. Implementation in new host TC71RA1 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.32 W/kg (Body).
2. Use the software to decreased the conducted output power. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change for :
1. Implementation in new host TC71RA1 tablet. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.32 W/kg (Body).
2. Use the software to decreased the conducted output power. |
various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change for implementation in new host "Lenovo MIIX 3-830xxxxxx, 20472xxxxxx, 80JBxxxxxx (x can be 0-9, A-Z, a-z, "-" or blank). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.39 W/kg (Body), 1.11 W/kg (simultanous). |
various | Class II Permissive Change for adding a portable host ECS ELITEGROUP Model: TC79RA2,TC79xxxx, S27xPU, S27xPW (x=0~9, A~Z, a~z or blank or "-").
Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Class II Permissive Change for adding a portable host ECS ELITEGROUP Model: TC79RA2,TC79xxxx, S27xPU, S27xPW (x=0~9, A~Z, a~z or blank or "-"). The highest reported SAR value for body-worn use condition is 1.3 W/kg.
Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in new host TR10RSx tabletk. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 0.02 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new host TWR10RSx tablet. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body).
Class II Change: This Class II Change for implementation in new host TW80xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.39 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body).
Class II Change: This Class II Change for implementation in new host TW80xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.39 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body). |
various | Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antennas used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 802.11n, 20MHz and 40MHz mode.
Class II Change: Class II Change: This Class II Change for implementation in new host TW10xxxx tablet from Winbook. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR value is 1.42 W/kg (Body). |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz mode. |
various | Output power listed is conducted. This OEM module is approved for use in products operating as mobile transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. This device and its antenna(s) must operate with a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SPORTON International Inc.
|
various
|
A Test Lab Techno Corp.
|
various
|
Compliance Certification Services (Kunshan) Inc.
|
various
|
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
SGS Taiwan Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Cerpass Technology (SuZhou) Co., Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
various
|
Compliance Certification Services (KunShan) Inc.
|
various
|
Sporton International Inc.
|
various
|
Name |
A****** C****
|
various
|
J******** L****
|
various
|
E**** L********
|
various
|
S**** H****
|
various
|
R******** W******
|
various
|
R****** C********
|
various
|
M****** C****
|
various
|
K**** C****
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
886-3********
|
various
|
86-51********
|
various
|
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
86-05******** Extension:
|
various
|
886-3******** Extension:
|
various
|
88633******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
886-3********
|
various
|
86-51********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
86-05********
|
various
|
886-3********
|
various
|
88633********
|
various
|
E-mail |
a******@sporton.com.tw
|
various
|
J******@atl-lab.com.tw
|
various
|
e******@tw.ccsemc.com
|
various
|
s******@dekra.com
|
various
|
R******@sgs.com
|
various
|
r******@tw.bureauveritas.com
|
various
|
m******@cerpass.net
|
various
|
k******@tw.ccsemc.com
|
|