| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 12 2017 | June 12 2017 |
| various | User Manual | Users Manual | 883.64 KiB | May 12 2017 / June 12 2017 |
RTL8723BS Combo NGFF1216 Users Manual Rev. 1.0 20 March 2014 Realtek Semiconductor Corp. No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan Tel.: +886-3-578-0211. Fax: +886-3-577-6047 www.realtek.com.tw COPYRIGHT RTL8723BS Combo NGFF1216 User Manual 2013 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp. DISCLAIMER Realtek provides this document as is, without warranty of any kind, neither expressed nor implied, including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors. TRADEMARKS Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are trademarks/registered trademarks of their respective owners. USING THIS DOCUMENT This document is intended for the software engineers reference and provides detailed programming information. Though every effort has been made to ensure that this document is current and accurate, more information may have become available subsequent to the production of this guide. In that event, please contact your Realtek representative for additional information that may help in the development process. ii Rev.1.0 RTL8723BS Combo NGFF1216 User Manual Table of Contents 1. GENERAL DESCRIPTION ................................................................................................................................................ 4 1.1. RTL8723BS .................................................................................................................................................................... 4 1.2. ENVIRONMENTAL ............................................................................................................................................................ 4 1.2.1. Operating ............................................................................................................................................................... 4 1.2.2. Storage .................................................................................................................................................................... 4 1.3. FUNCTIONAL SPECIFICATIONS .......................................................................................................................................... 4 1.4. WARNING ........................................................................................................................................................................ 6 1.4.1 Federal Communication Commission Interference Statement ...................................................................................... 6 1.4.2 Industry Canada Statement .......................................................................................................................................... 7 1.4.3 NCC ................................................................................................................................................................... 10 1.4.4 Japan Statement ......................................................................................................................................................... 10 List of Tables TABLE 2. FUNCTIONAL SPECIFICATIONS ........................................................................................................................................ 4 List of Figures iii Rev.1.0 1. General Description 1.1. RTL8723BS RTL8723BS Combo NGFF1216 User Manual The Realtek RTL8723BS is a highly integrated single-chip 802.11n Wireless LAN (WLAN) SDIO network interface controller with integrated Bluetooth 2.1/3/0/4.0 USB interface controller. It combines a WLAN MAC, a 1T1R capable WLAN baseband, and RF in s single chip. The RTL8723BS provides a complete solution for a high-performance integrated wireless and Bluetooth device. The integration provides better coordination between 802.11 and Bluetooth, and with sophisticated dynamic power control and packet traffic arbitration, RTL8723BS is able to provide the best coexistence performance. RTL8723BS also integrates RF/PA/LNA for both 802.11n and Bluetooth so that the number of external components is reduced to minimum. The 802.11 part supports 150Mbps PHY rate and delivers reliable throughput from an extended distance. The Bluetooth part supports latest 3.0+HS/4.0+LE operation and provides smooth user experience under all usage scenarios. Optimized RF architecture and baseband algorithms provide superb performance and lowest power consumption. 1.2. Environmental 1.2.1. Operating Operating Temperature:
Relative Humidity:
0 to 70 C 5-90% (non-condensing) 1.2.2. Storage Temperature:
Relevant Humidity:
-55 to 125 C 5-95% (non-condensing) 1.3. Functional Specifications Standards Bus Interface Form Factor Data Rate Table 1. Functional Specifications WiFi:
IEEE 802.11b, IEEE 802.11g, Draft IEEE 802.11n, IEEE 802.11d, IEEE 802.11e, IEEE 802.11h, IEEE 802.11i BT:
BT v3.0, v4.0 WiFi: SDIO BT: UART NGFF1216 802.11b:
11, 5.5, 2, 1 Mbps;
4 Rev.1.0 802.11g:
RTL8723BS Combo NGFF1216 User Manual 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:
MCS 0 to 7 for HT20MHz;
MCS 0 to 7 for HT40MHz BT:
1/2/3 Mbps WiFi:
CSMA/CA with ACK WiFi + BT:
AFH, Time Division 802.11b:
CCK, DQPSK, DBPSK 802.11g:
64 QAM, 16 QAM, QPSK, BPSK 802.11n:
BPSK, QPSK, 16-QAM, 64-QAM BT:
GFSK, /4 DQPSK, 8DPSK WiFi:
Ad-hoc mode (Peer-to-Peer ) Infrastructure mode WiFi 2.4GHz:
11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 13: (Ch. 1-14) Japan BT 2.4GHz:
Ch. 0 ~78 2.400GHz ~ 2.4835 GHz WiFi :
WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE 802.11x, IEEE 802.11i BT:
Simple Paring 3.3 V 9% I/O supply voltage Media Access Control Modulation Techniques Network Architecture Operating Channel Frequency Range Security Operating Voltage 5 Rev.1.0 1.4. Warning RTL8723BS Combo NGFF1216 User Manual 1.4.1 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without C2P. This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 6 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
TX2-RTL8723BS ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. 1.4.2 Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device French translation:
Ce dispositif est conforme aux CNR d'IndustrieCanada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. This device has been designed to operate with an antenna having a maximum gain of 3.5dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the EIRP is not more than required for successful communication. French translation:
Ce dispositif a t conu pour fonctionner avec une antenne ayant un gain maximum de 3.5 dBi. Une antenne gain plus lev est strictement interdite par les rglements d'Industrie Canada. L'impdance 7 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual d'antenne requise est de 50 ohms. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pourl'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. French translation:
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Refering to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. This module is intended for OEM integrator. The OEM integrator is still responsible for the IC compliance requirement of the end product, which integrates this module. USERS MANUAL OF THE END PRODUCT:
8 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC :
6317A-RTL8723BS ". This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (identifier le dispositif par son numro de certification ou son numro de modle s'il fait partie du matriel de catgorie I) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Antenna List Brand LYNwave Brand MDLINK Type Model ALA110-222050-30001 Type Type Model MBMC01551682G Dipole Gain 3.5dBi Gain 2dBi Function WiFi 2.4GHz, BT BR/EDR/LE Function WiFi 2.4GHz, BT BR/EDR/LE 9 Rev.1.0 1.4.3 NCC RTL8723BS Combo NGFF1216 User Manual XXXyyyLPDzzzz-x (NCC ID) 1.4.4 Japan Statement Host system must be labeled with "Contains MIC ID:xxxxxx, MIC ID displayed on label Installing the Wireless NGFF1216 module Hardware Step 1. Shut down the computer. Step 2. Mount the NGFF1216 module on motherboard by soldering. 10 Rev.1.0 Step 3. Connect external Wi-Fi/BT antenna to corresponding RF connector. RTL8723BS Combo NGFF1216 User Manual Step 4. Power on the computer. Un-installing the Wireless NGFF1216 module Hardware Step 1. Shut down the computer. Step 2. Remove external Wi-Fi/BT antenna from the wireless NGFF1216 module board. Step 3. Unmount the NGFF1216 module from motherboard by soldering. Installing the Wireless SDIO module Software Before you proceed with the installation, please notice following descriptions. Note1: The following installation was operated under Windows XP. 11 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual
(Procedures are similar for Windows 98SE/Me/2000.) Note2: If you have installed the WLAN driver & utility before, please uninstall the old version first. If you install the Realtek11n Single Chip SDIO WLAN NIC Mass production kit into your laptop computer before installing the software program from the CD. A. Insert the Installation CD to your CD-ROM Drive. Execute the setup program. B. Click Next to process the installation C. The system starts to install the software of the WLAN adapter. 12 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual D. The system will automatically detect the card and display Hardware Installation screen. Click to continue. E. Please click Finish to complete the installation. 13 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual 14 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual Un-installing the Wireless SDIO module Software If you install Realtek11n Single Chip SDIO WLAN NIC Mass production kit into your laptop computer after installing the software program from the CD. When you install Realtek11n Single Chip WLAN SDIO MINICARD Adapter, the following dialog will be shown. A. Uninstall the RTL8723BS WLAN Driver from Start All Programs Realtek11n Single Chip WLAN SDIO NIC Mass production kit or Control PanelChange or Remove Programs. Please click Un-install (or Change/Remove) to remove RTL8723BS WLAN driver. B. Please click Finish to complete the un-installation 15 Rev.1.0 RTL8723BS Combo NGFF1216 User Manual Installing the Bluetooth Module Software A. Connect the USB-to-RS232 adapter to computer. B. Choose the right COM port and baud rate setting from the BT test UI, then press the OK button below. 16 Rev.1.0 C. The driver will be installed successfully as shown below. RTL8723BS Combo NGFF1216 User Manual Realtek Semiconductor Corp. Headquarters No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu, 300, Taiwan, R.O.C. Tel: 886-3-5780211 Fax: 886-3-5776047 www.realtek.com.tw 17 Rev.1.0
This product uses the FCC Data API but is not endorsed or certified by the FCC