app
s
|
Applicant Information
|
|
various
|
Effective |
2017-12-08
|
various
|
2017-12-06
|
various
|
2016-02-17
|
various
|
2014-03-06
|
various
|
Applicant's complete, legal business name |
Realtek Semiconductor Corp.
|
various
|
FCC Registration Number (FRN) |
0020109807
|
various
|
Physical Address |
No. 2
|
various
|
Hsinchu, N/A 300
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
u******@sgs.com
|
various
|
T******@TIMCOENGR.COM
|
various
|
c******@curtis-straus.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
TX2
|
various
|
Equipment Product Code |
RTL8821AU
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
D****** L******
|
various
|
Title |
Project Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
d******@realtek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
Compliance Certification Services Inc.
|
various
|
Name |
J****** H****
|
various
|
C****** L********
|
various
|
Physical Address |
No. 11. Wugong 6th Road
|
various
|
New Taipei City, 24891
|
various
|
Taiwan
|
various
|
Telephone Number |
886.2********
|
various
|
886.2******** Extension:
|
various
|
886.2******** Extension:
|
various
|
Fax Number |
886.2********
|
various
|
E-mail |
j******@ccsrf.com
|
various
|
c******@ccsrf.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
Compliance Certification Services Inc.
|
various
|
Name |
J******** H****
|
various
|
C******** L********
|
various
|
Physical Address |
No. 11. Wugong 6th Road
|
various
|
New Taipei City, 24891
|
various
|
Taiwan
|
various
|
Telephone Number |
886.2********
|
various
|
886.2******** Extension:
|
various
|
886.2******** Extension:
|
various
|
Fax Number |
886.2********
|
various
|
E-mail |
j******@ccsrf.com
|
various
|
c******@ccsrf.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/06/2018 |
various | 06/04/2018 |
various | 04/30/2014 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11 a/b/g/n/ac RTL8821AU Combo Module |
various | 802.11a/b/g/n/ac RTL8821AU Combo module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
This change is for module being used in different host (Portable category configuration), Host Realtek/Model: PD-S10. SAR Testing has been performed to demonstrate RF Compliance. The highest reported SAR for simultaneous transmission exposure conditions is 0.23 W/kg |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter
This change is for module being used in different host (Portable category configuration), Host Realtek/Model: PD-S10. SAR Testing has been performed to demonstrate RF Compliance. The highest reported SAR values for stand-alone exposure condition is: 0.35 W/kg. |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 03/06/2014).
This change is for module being used in different host (Portable category configuration), Host Realtek/Model: PD-S10. SAR Testing has been performed to demonstrate RF Compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are
0.13 W/kg and 0.23 W/kg, respectively. The portable device has 20 and 40 MHz bandwidth modes. |
various | C2PC: Integration in a new portable host (Brand name: PIONEER / model: XDP-02U.)
The highest reported SAR values for stand-alone & simultaneous transmission exposure conditions are: 0.63 W/kg, 0.65 W/kg respectively.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 and 40MHz bandwidth modes. |
various | C2PC: Integration in a new portable host (Brand name: PIONEER / model: XDP-02U.)
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | C2PC: Integration in a new portable host (Brand name: PIONEER / model: XDP-02U.)
The highest reported SAR values for stand-alone exposure condition is: 0.66 W/kg.
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 and 40MHz bandwidth modes. |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 03/06/2014)
Class II Permissive Change: This class II Permissive Change is to update to the new UNII rules. |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. |
various | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Compliance Certification Services Inc. Wugu Lab.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
H**** L****
|
various
|
K**** L****
|
various
|
R**** C********
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
+886-******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
+886-********
|
various
|
+886-********
|
various
|
E-mail |
h******@sgs.com
|
various
|
k******@tw.bureauveritas.com
|
various
|
r******@tw.bureauveritas.com
|
|