app
s
|
Applicant Information
|
|
various
|
Effective |
2016-11-01
|
various
|
2016-01-27
|
various
|
2016-01-04
|
various
|
2015-05-19
|
various
|
2014-12-04
|
various
|
2014-05-16
|
various
|
2013-07-24
|
various
|
2013-06-28
|
various
|
2013-05-14
|
various
|
Applicant's complete, legal business name |
Realtek Semiconductor Corp.
|
various
|
FCC Registration Number (FRN) |
0020109807
|
various
|
Physical Address |
No. 2
|
various
|
Hsinchu, N/A 300
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
h******@acbcert.com
|
various
|
T******@TIMCOENGR.COM
|
various
|
L******@ul.com
|
various
|
b******@phoenix-testlab.de
|
various
|
b******@phoenix-testlab.de
|
various
|
B******@phoenix-testlab.de
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
TX2
|
various
|
Equipment Product Code |
RTL8192EEBT
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
D**** L********
|
various
|
Title |
Project Manager
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
Fax Number |
886-3********
|
various
|
E-mail |
d******@realtek.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
QuieTek Corporation
|
various
|
QuieTek
|
various
|
Name |
V****** W********
|
various
|
M******** C****
|
various
|
Physical Address |
No.159, Sec. 2, Wenhua 1st Rd., Linkou Dist.
|
various
|
New Taipei City, 24457
|
various
|
Taiwan
|
various
|
Telephone Number |
88622******** Extension:
|
various
|
Fax Number |
88622********
|
various
|
E-mail |
v******@quietek.com
|
various
|
m******@quietek.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
various | Yes |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/12/2015 |
various | 11/13/2014 |
various | 01/20/2014 |
various | 08/24/2013 |
various | 11/10/2013 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DTS - Digital Transmission System |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11b/g/n RTL8192EE Combo module |
various | 802.11bgn RTL8192EE Combo module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Does not apply |
various | Limited Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Single Modular Approval. Output Power listed is the maximum combined conducted
output power as indicated in the filing. The device can be self-colocated with the
composite DSS portion. The antenna(s) used for this transmitter must not be co-located
or operating in conjunction with any other antenna or transmitters except in accordance
with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial
Multiplexing MIMO configuration as described in this filing. When operating in 802.11n,
40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This
OEM module is approved for use in products operating as mobile transmitting device.
The antennas approved for use with this module are those documented in the filing, and
must be installed in the manner specified therein. Grantee shall provide installation and
operating instructions for satisfying RF exposure requirements to OEM integrators and
installers. This grant is valid only when the device is sold to OEM integrators and the
OEM integrators are instructed to ensure that the end user has no manual instructions to
remove or install the device. (Date of Grant: 05/14/2013)
Class II Permissive Change: this Class II Permissive Change is to extend the grant
condition to portable condition under 5 mm test separation distance. This equipment
should be installed and operated with a minimum distance of 0.5cm between the radiator
and the users body. The highest reported SAR for stand-alone and simultaneous
transmission exposure conditions are 1.18 W/kg and 1.96 W/kg, respectively.
C2PC to install this module to ASUS host with models - E403N, L403N, R416N and X400N as documented in this filing. |
various | Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)
Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.
C2PC to install this module to ASUS host with models - TP501U, J501U and R518U, as documented in this filing. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.2 W/kg and 1.37 W/kg, respectively. |
various | Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)
Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively.
C2PC to install this module to ASUS notebook/tablet with models TP301U and Q303U; and address SAR evaluation, as documented in this filing. |
various | Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)
Class II Permissive Change: This Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. |
various | Single Modular Approval. Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Date of Grant: 05/14/2013)
Class II Permissive Change: this Class II Permissive Change is to extend the grant condition to portable condition under 5 mm test separation distance. This equipment should be installed and operated with a minimum distance of 0.5cm between the radiator and the users body. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.75 W/kg and 0.95 W/kg, respectively. |
various | Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-collocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change to add portable RF exposure configuration model TP00062B and add new antennas. For Modular SAR, the highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. SAR measurements are excluded for this DSS transmission in this C2PC. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-collocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change to add portable RF exposure configuration model TP00062B and add new antennas. For Modular SAR, the highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. The highest reported SAR value in this C2PC is 1.15 W/kg. |
various | Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (lenovo Notebook / Model: TP00066A) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the host as specified in the Certification filing. The SAR data in this filing is applicable to demonstrate compliance for this specific host device as shown in this filing. The highest reported SAR for body-worn configuration (0 cm gap/direct touch) and simultaneous transmission exposure conditions are 0.47 W/kg and 0.77 W/kg, respectively. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (lenovo Notebook / Model: TP00066A) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the host as specified in the Certification filing. The SAR data in this filing is applicable to demonstrate compliance for this specific host device as shown in this filing. The highest reported SAR for body-worn configuration (0 cm gap/direct touch) and simultaneous transmission exposure conditions are 0.47 W/kg and 0.77 W/kg, respectively |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. |
various | Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
Class II Permissive Change upgrades mobile to portable RF exposure configuration. Highest SAR value for body-worn configuration with highest gain PIFA antenna and 0.8 cm separation distance: 0.77 W/kg. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (ThinkPad X240 / X240s / T440s) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. |
various | Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This Class II Permissive Change adds the installation of this RF Module by end-users into the lenovo laptop (ThinkPad X240 / X240s / T440s) via 2-way BIOS lock function. This device must use a BIOS lock mechanism which ensures that it only operates with the hosts as specified in the Certification filing. |
various | Output Power listed is the maximum combined conducted output power as indicated in the filing. The device can be self-colocated with the composite DSS portion. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitters except in accordance with FCC multi-transmitter product procedures. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Output Power listed is the maximum conducted output power as indicated in the filing. The device can be self-colocated with the composite DTS portion.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This OEM module is approved for use in products operating as mobile transmitting device. The antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
various
|
Sporton International Inc.
|
various
|
Compliance Certification Services Inc.
|
various
|
Name |
S**** H********
|
various
|
A******** C******
|
various
|
W****** C******
|
various
|
Telephone Number |
+886-******** Extension:
|
various
|
886-3******** Extension:
|
various
|
886-3******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
886-3********
|
various
|
886-3********
|
various
|
E-mail |
s******@dekra.com
|
various
|
a******@sporton.com.tw
|
various
|
w******@ccsrf.com
|
|