app
s
|
Applicant Information
|
|
various
|
Effective |
2019-09-18
|
various
|
2018-10-23
|
various
|
2018-07-13
|
various
|
2017-09-26
|
various
|
2017-01-25
|
various
|
Applicant's complete, legal business name |
Marvell Semiconductor, Inc.
|
various
|
FCC Registration Number (FRN) |
0015112121
|
various
|
Physical Address |
5488 Marvell Lane
|
various
|
Santa Clara, 95054
|
various
|
United States
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
t******@siemic.com
|
various
|
e******@ul.com
|
various
|
T******@siemic.com
|
various
|
h******@acbcert.com
|
various
|
t******@us.bureauveritas.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
UAY
|
various
|
Equipment Product Code |
W8997-M1216
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
K**** W********
|
various
|
Telephone Number |
408-2********
|
various
|
Fax Number |
408-2********
|
various
|
E-mail |
k******@marvell.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
UL Japan, Inc.
|
various
|
DEKRA Testing and Certification Co., Ltd
|
various
|
Name |
S******** M****
|
various
|
V****** W****
|
various
|
Physical Address |
4383-326 Asama-cho, Ise-shi
|
various
|
No.5-22, Ruishukeng, Linkou Dist.
|
various
|
Mie-ken, 516-0021
|
various
|
New Taipei City, 24457
|
various
|
Japan
|
various
|
Taiwan
|
various
|
Telephone Number |
81-59********
|
various
|
886-2******** Extension:
|
various
|
Fax Number |
81-59********
|
various
|
886-2********
|
various
|
E-mail |
S******@ul.com
|
various
|
v******@dekra.com
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 03/17/2020 |
various | 01/14/2019 |
various | 07/24/2017 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | NII - Unlicensed National Information Infrastructure TX |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Module |
various | IEEE 802.11 2x2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Single Modular Approval |
various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
various | Original Equipment |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | C2PC to add 9 sets of dipole/PCB/PIFA antenna.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | C2PC to add 9 sets of dipole/PCB/PIFA antenna.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
various | C2PC to add 9 sets of dipole/PCB/PIFA antenna.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
various | Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN Mode reduced power). Single Modular Approval. Output power listed is Conducted(Peak). This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : HD Memory Card Camera Recorder GY-HC900CHU). When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines.
The highest reported SAR values is 0.71 W/kg : Body-worn in this host.
This module highest reported Body SAR values is 1.11 W/kg and Simultaneous SAR values is 0.97 W/kg |
various | Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN Mode reduced power). Single Modular Approval. Output power listed is Conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : HD Memory Card Camera Recorder GY-HC900CHU). When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.
The highest reported SAR values is 0.71 W/kg : Body-worn in this host.
This module highest reported Body SAR values is 1.11 W/kg and Simultaneous SAR values is 0.97 W/kg |
various | C2PC to add 2 sets of dipole antenna.
Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | C2PC to add 2 sets of dipole antenna.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
various | C2PC to add 2 sets of dipole antenna.
Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C101P, with antenna ACON, part no. ANF5Y-100002, 14008-02390200, ANF5Y-100003, 14008-02390300 and INPAQ, part no. WA-F-LB-02-103, 14008-02390000, WA-P-LB-01-104, 14008-02390100.
The highest reported Body SAR = 0.08W/kg and Simultaneous SAR = 0.90W/kg. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes
Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C101P, with antenna ACON, part no. ANF5Y-100002, 14008-02390200, ANF5Y-100003, 14008-02390300 and INPAQ, part no. WA-F-LB-02-103, 14008-02390000, WA-P-LB-01-104, 14008-02390100.
The highest reported Body SAR = 1.11W/kg and Simultaneous SAR = 0.90W/kg. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes.
Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C101P, with antenna ACON, part no. ANF5Y-100002, 14008-02390200, ANF5Y-100003, 14008-02390300 and INPAQ, part no. WA-F-LB-02-103, 14008-02390000, WA-P-LB-01-104, 14008-02390100.
The highest reported Body SAR = 0.62W/kg and Simultaneous SAR = 0.94W/kg. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. |
various | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes. |
various | Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
various
|
UL Japan, Inc.
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
|
various
|
Name |
E**** L********
|
various
|
M******** I********
|
various
|
S******** H********
|
various
|
R**** C****
|
various
|
Telephone Number |
886-3******** Extension:
|
various
|
81-59********
|
various
|
886-2******** Extension:
|
various
|
+886-******** Extension:
|
various
|
Fax Number |
+886-********
|
various
|
81-59********
|
various
|
886-2********
|
various
|
+886-********
|
various
|
E-mail |
e******@tw.bureauveritas.com
|
various
|
m******@ul.com
|
various
|
s******@quietek.com
|
various
|
r******@tw.bureauveritas.com
|
|