FCC ID: UAY-W8997-M1216 IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Module

by: Marvell Semiconductor, Inc. latest update: 2019-09-18 model: W8997-M1216

Fourteen grants have been issued under this FCC ID from 01/25/2017 to 09/18/2019 (this is one of three releases in 2019 for this grantee). Public details available include manuals, internal & external photos, and frequency information. some products also feature user submitted or linked instructions, troubleshooting guides, password defaults, drivers, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various (W8997-M1216) UserMan Users Manual pdf 926.88 KiB
various 04 User Manual 1 Users Manual pdf 3.49 MiB
various 04 User Manual 2 Users Manual pdf 139.91 KiB
various User Manual rev 2 Users Manual pdf 471.37 KiB
various (W8997-M1216) Inpho SAR 20170926 Internal Photos pdf 1.03 MiB
various Internal Photos Internal Photos pdf 335.54 KiB
various (W8997-M1216) Expho SAR 20170926 External Photos pdf 364.48 KiB
various External Photos External Photos pdf 624.94 KiB
various External photo External Photos pdf 1.48 MiB
various (W8997-M1216) LabelLoc ID Label/Location Info pdf 34.70 KiB
various (W8997-M1216) Labelsmpl ID Label/Location Info pdf 43.46 KiB
various Label Location ID Label/Location Info pdf 16.71 KiB
various Label Sample ID Label/Location Info pdf 415.50 KiB
various Agent Authorization Letter Cover Letter(s) pdf 98.35 KiB
various Authorization Letter Cover Letter(s) pdf 73.23 KiB
various Class II Permissive Change Request Letter Cover Letter(s) pdf 142.18 KiB
various Test Report pdf
various STC Letter Cover Letter(s) pdf 94.50 KiB
various Test Report pdf
various Test Report pdf
various 02 FCC Attestation Letter for Radiated Emission Cover Letter(s) pdf 25.88 KiB
various 02 FCC Authorization Letter Cover Letter(s) pdf 31.25 KiB
various 02 FCC Class II Permissive Change Letter Cover Letter(s) pdf 98.13 KiB
various 02 FCC Declaration of Professional Installation module Cover Letter(s) pdf 26.19 KiB
various 02 FCC Request for Confidentiality Letter Cover Letter(s) pdf 31.92 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various Agent authorization Cover Letter(s) pdf 51.21 KiB
various C2PC letter Cover Letter(s) pdf 55.36 KiB
various Confidential request letter Cover Letter(s) pdf 50.69 KiB
various Test Report pdf
various Explanation Letter Cover Letter(s) pdf 533.19 KiB
various RF Exposure Info pdf
various Power of Attorney Letter Cover Letter(s) pdf 72.42 KiB
various Test Setup Photos pdf
various Short term confidential request Cover Letter(s) pdf 29.05 KiB
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Report pdf
various (W8997-M1216) ATTESTATION Cover Letter(s) pdf 38.64 KiB
various (W8997-M1216) Class II Change Cover Letter(s) pdf 30.43 KiB
various (W8997-M1216) Confidentiality Cover Letter(s) pdf 37.81 KiB
various (W8997-M1216) Declaration of authorization Cover Letter(s) pdf 34.49 KiB
various (W8997-M1216) Doc Letter Cover Letter(s) pdf 34.77 KiB
various RF Exposure Info pdf
various Test Setup Photos pdf
various (W8997-M1216) DTS-UNII Declaration letter Cover Letter(s) pdf 45.55 KiB
various Attestation - Channel and Mode Declaration Attestation Statements pdf 23.24 KiB
various Attestation - DFS Declaration Attestation Statements pdf 90.02 KiB
various Cover Letter - Agent Authorization Cover Letter(s) pdf 28.00 KiB
various Cover Letter - Confidentiality Request - Long Term Cover Letter(s) pdf 19.96 KiB
various Cover Letter - Confidentiality Request - Short Term Cover Letter(s) pdf 33.15 KiB
various Modular Approval Request Cover Letter(s) pdf 18.25 KiB
various RF Exposure Info pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Report pdf
various Test Setup Photos pdf
various Test Setup Photos pdf
various Schematics pdf
various (W8997-M1216) UserMan Users Manual pdf 926.88 KiB
various 04 User Manual 1 Users Manual pdf 3.49 MiB
various 04 User Manual 2 Users Manual pdf 139.91 KiB
various User Manual rev 2 Users Manual pdf 471.37 KiB
various (W8997-M1216) Inpho SAR 20170926 Internal Photos pdf 1.03 MiB
various Internal Photos Internal Photos pdf 335.54 KiB
various (W8997-M1216) Expho SAR 20170926 External Photos pdf 364.48 KiB
various External Photos External Photos pdf 624.94 KiB
various External photo External Photos pdf 1.48 MiB
various (W8997-M1216) LabelLoc ID Label/Location Info pdf 34.70 KiB
various (W8997-M1216) Labelsmpl ID Label/Location Info pdf 43.46 KiB
various Label Location ID Label/Location Info pdf 16.71 KiB
various Label Sample ID Label/Location Info pdf 415.50 KiB
various Agent Authorization Letter Cover Letter(s) pdf 98.35 KiB
various Authorization Letter Cover Letter(s) pdf 73.23 KiB
various Class II Permissive Change Request Letter Cover Letter(s) pdf 142.18 KiB
various STC Letter Cover Letter(s) pdf 94.50 KiB
various 02 FCC Attestation Letter for Radiated Emission Cover Letter(s) pdf 25.88 KiB
various 02 FCC Authorization Letter Cover Letter(s) pdf 31.25 KiB
various 02 FCC Class II Permissive Change Letter Cover Letter(s) pdf 98.13 KiB
various 02 FCC Declaration of Professional Installation module Cover Letter(s) pdf 26.19 KiB
various 02 FCC Request for Confidentiality Letter Cover Letter(s) pdf 31.92 KiB
various Agent authorization Cover Letter(s) pdf 51.21 KiB
various C2PC letter Cover Letter(s) pdf 55.36 KiB
various Confidential request letter Cover Letter(s) pdf 50.69 KiB
various Explanation Letter Cover Letter(s) pdf 533.19 KiB
various Power of Attorney Letter Cover Letter(s) pdf 72.42 KiB
various Short term confidential request Cover Letter(s) pdf 29.05 KiB
various (W8997-M1216) ATTESTATION Cover Letter(s) pdf 38.64 KiB
various (W8997-M1216) Class II Change Cover Letter(s) pdf 30.43 KiB
various (W8997-M1216) Confidentiality Cover Letter(s) pdf 37.81 KiB
various (W8997-M1216) Declaration of authorization Cover Letter(s) pdf 34.49 KiB
various (W8997-M1216) Doc Letter Cover Letter(s) pdf 34.77 KiB
various (W8997-M1216) DTS-UNII Declaration letter Cover Letter(s) pdf 45.55 KiB
various Attestation - Channel and Mode Declaration Attestation Statements pdf 23.24 KiB
various Attestation - DFS Declaration Attestation Statements pdf 90.02 KiB
various Cover Letter - Agent Authorization Cover Letter(s) pdf 28.00 KiB
various Cover Letter - Confidentiality Request - Long Term Cover Letter(s) pdf 19.96 KiB
various Cover Letter - Confidentiality Request - Short Term Cover Letter(s) pdf 33.15 KiB
various Modular Approval Request Cover Letter(s) pdf 18.25 KiB

frequency equipment class purpose
1 2019-09-18 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
2 2412 ~ 2462 DTS - Digital Transmission System
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2018-10-23 2412 ~ 2462 DTS - Digital Transmission System
5 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
6 2018-07-13 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
7 2412 ~ 2462 DTS - Digital Transmission System
8 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
9 2017-09-26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
10 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
11 2412 ~ 2462 DTS - Digital Transmission System
12 2017-01-25 2412 ~ 2462 DTS - Digital Transmission System Original Equipment
13 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2019-09-18
various 2018-10-23
various 2018-07-13
various 2017-09-26
various 2017-01-25
various Applicant's complete, legal business name Marvell Semiconductor, Inc.
various FCC Registration Number (FRN) 0015112121
various Physical Address 5488 Marvell Lane
various Santa Clara, 95054
various United States
app s TCB Information
various TCB Application Email Address t******@siemic.com
various e******@ul.com
various T******@siemic.com
various h******@acbcert.com
various t******@us.bureauveritas.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code UAY
various Equipment Product Code W8997-M1216
app s Person at the applicant's address to receive grant or for contact
various Name K****** W******
various Telephone Number 408-2********
various Fax Number 408-2********
various E-mail k******@marvell.com
app s Technical Contact
various Firm Name UL Japan, Inc.
various DEKRA Testing and Certification Co., Ltd
various Name S****** M******
various V**** W******
various Physical Address 4383-326 Asama-cho, Ise-shi
various No.5-22, Ruishukeng, Linkou Dist.
various Mie-ken, 516-0021
various New Taipei City, 24457
various Japan
various Taiwan
various Telephone Number 81-59********
various 886-2******** Extension:
various Fax Number 81-59********
various 886-2********
various E-mail S******@ul.com
various v******@dekra.com
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)03/17/2020
various01/14/2019
various07/24/2017
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDSS - Part 15 Spread Spectrum Transmitter
variousDTS - Digital Transmission System
variousNII - Unlicensed National Information Infrastructure TX
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)IEEE 802.11 2X2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Module
variousIEEE 802.11 2x2 MU-MIMO ac/a/b/g/n Wireless LAN + Bluetooth NGFF Module
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsC2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes.
variousC2PC to add 9 sets of dipole/PCB/PIFA antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes.
variousClass II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN Mode reduced power). Single Modular Approval. Output power listed is Conducted(Peak). This device has 20 MHz and 40 MHz bandwidth modes for 2.4 GHz bands. For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : HD Memory Card Camera Recorder GY-HC900CHU). When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. The highest reported SAR values is 0.71 W/kg : Body-worn in this host. This module highest reported Body SAR values is 1.11 W/kg and Simultaneous SAR values is 0.97 W/kg
variousClass II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN Mode reduced power). Single Modular Approval. Output power listed is Conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. For professional installation only. Device shall not be sold to general public. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system : HD Memory Card Camera Recorder GY-HC900CHU). When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR values is 0.71 W/kg : Body-worn in this host. This module highest reported Body SAR values is 1.11 W/kg and Simultaneous SAR values is 0.97 W/kg
variousC2PC to add 2 sets of dipole antenna. Power listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousC2PC to add 2 sets of dipole antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes.
variousC2PC to add 2 sets of dipole antenna. Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C101P, with antenna ACON, part no. ANF5Y-100002, 14008-02390200, ANF5Y-100003, 14008-02390300 and INPAQ, part no. WA-F-LB-02-103, 14008-02390000, WA-P-LB-01-104, 14008-02390100. The highest reported Body SAR = 0.08W/kg and Simultaneous SAR = 0.90W/kg.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C101P, with antenna ACON, part no. ANF5Y-100002, 14008-02390200, ANF5Y-100003, 14008-02390300 and INPAQ, part no. WA-F-LB-02-103, 14008-02390000, WA-P-LB-01-104, 14008-02390100. The highest reported Body SAR = 1.11W/kg and Simultaneous SAR = 0.90W/kg.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS C101P, with antenna ACON, part no. ANF5Y-100002, 14008-02390200, ANF5Y-100003, 14008-02390300 and INPAQ, part no. WA-F-LB-02-103, 14008-02390000, WA-P-LB-01-104, 14008-02390100. The highest reported Body SAR = 0.62W/kg and Simultaneous SAR = 0.94W/kg.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40MHz bandwidth modes.
variousPower listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40MHz and 80MHz bandwidth modes.
variousPower listed is the maximum conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various UL Japan, Inc.
various DEKRA Testing and Certification Co., Ltd.
various Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
various Name E******** L********
various M**** I********
various S******** H******
various R******** C****
various Telephone Number 886-3******** Extension:
various 81-59********
various 886-2******** Extension:
various +886-******** Extension:
various Fax Number +886-********
various 81-59********
various 886-2********
various +886-********
various E-mail e******@tw.bureauveritas.com
various m******@ul.com
various s******@quietek.com
various r******@tw.bureauveritas.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402 2480 0.003
2 2 15C CC MO 2412 2462 0.932
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E 38 CC MO 5180 5240 0.152
3 2 15E 38 CC MO ND 5260 5320 0.148
3 3 15E 38 CC MO ND 5500 5700 0.137
3 4 15E 38 CC MO 5745 5825 0.194
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402 2480 0.003
4 2 15C CC MO 2412 2462 0.932
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.152
5 2 15E CC MO 5260 5320 0.148
5 3 15E CC MO 5500 5700 0.137
5 4 15E CC MO 5745 5825 0.194
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.003
7 2 15C CC MO 2412 2462 0.932
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E 38 CC MO 5180 5240 0.152
8 2 15E 38 CC MO ND 5260 5320 0.148
8 3 15E 38 CC MO ND 5500 5700 0.137
8 4 15E 38 CC MO 5745 5825 0.194
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15C CC 2402.00000000 2480.00000000 0.0050000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E 38 CC MO 5180 5240 0.152
10 2 15E 38 CC MO ND 5260 5320 0.148
10 3 15E 38 CC MO ND 5500 5700 0.137
10 4 15E 38 CC MO 5745 5825 0.194
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC MO 2412 2462 0.932
11 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC MO 2412 2462 0.932
12 2 15C CC 2402 2480 0.003
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E 38 CC MO 5180 5240 0.152
13 2 15E 38 CC MO ND 5260 5320 0.148
13 3 15E 38 CC MO ND 5500 5700 0.137
13 4 15E 38 CC MO 5745 5825 0.194
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0050000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC