app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2017-08-24
|
1 2 3
|
2017-08-18
|
1 2 3
|
2017-07-21
|
1 2 3
|
Applicant's complete, legal business name |
FLYTECH TECHNOLOGY CO., LTD
|
1 2 3
|
FCC Registration Number (FRN) |
0018869826
|
1 2 3
|
Physical Address |
No. 168, Sing-ai Rd., Neihu District, Taipei City
|
1 2 3
|
Taipei City
|
1 2 3
|
Taiwan
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
c******@telefication.com
|
1 2 3
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
XHM
|
1 2 3
|
Equipment Product Code |
L83FL41
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
A**** Z****
|
1 2 3
|
Telephone Number |
886-2******** Extension:
|
1 2 3
|
Fax Number |
886-2********
|
1 2 3
|
E-mail |
a******@flytech.com.tw
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
SGS Taiwan Ltd.
|
1 2 3
|
Name |
W**** C******
|
1 2 3
|
Physical Address |
134, Wu Kung Rd., Wuku Industrial Zone
|
1 2 3
|
Taiwan
|
1 2 3
|
Telephone Number |
88622********
|
1 2 3
|
Fax Number |
88622********
|
1 2 3
|
E-mail |
w******@sgs.com
|
|
app
s
|
Non Technical Contact
|
1 2 3
|
Firm Name |
SGS Taiwan Ltd.
|
1 2 3
|
Name |
W**** C****
|
1 2 3
|
Physical Address |
134, Wu Kung Rd., Wuku Industrial Zone
|
1 2 3
|
Taiwan
|
1 2 3
|
Telephone Number |
88622********
|
1 2 3
|
Fax Number |
88622********
|
1 2 3
|
E-mail |
w******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/18/2018 |
1 2 3 | 02/14/2018 |
1 2 3 | 01/17/2018 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | PCB - PCS Licensed Transmitter |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE Module |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 | Change in identification of presently authorized equipment. Original FCC ID: ZMOL830 Grant Date: 02/02/2016 |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Class 2 Permissive Change: this change is (a) Module is being installed in a host with Brand name/Model: iRUGGY/G10, (b) 2G &3G GPRS/EDGE transmitters are disabled via software.
The highest reported SAR values for body, and simultaneous transmission use conditions are 0.63 W/kg, and 1.48 W/kg, respectively.
Single Modular Approval. Power output listed is conducted at the antenna terminal.
This device is to be used only for mobile and fixed application, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures.
OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products, and must ensure that the end user has no manual instructions to remove or install this modular.
Endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance.
For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5 dBi and 3 dBi for below and above 1GHz, respectively, as defined in 2.1091 for satisfying RF exposure compliance.
Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22, Part 24 and Part 27. This device contains functions that are not operational in the U.S. Territories.
This filing is only applicable for U.S. operations |
1 2 3 | Class 2 Permissive Change: this change is (a) Module is being installed in a host with Brand name/Model: iRUGGY/G8, (b) New PIFA antenna has been added to this EUT, (c) 2G &3G GPRS/EDGE transmitters are disabled via software.
The highest reported SAR values for body, and simultaneous transmission use conditions are 1.05 W/kg, and 1.58 W/kg, respectively.
Single Modular Approval. Power output listed is conducted at the antenna terminal.
This device is to be used only for mobile and fixed application, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures.
OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products, and must ensure that the end user has no manual instructions to remove or install this modular.
Endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance.
For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5 dBi and 3 dBi for below and above 1GHz, respectively, as defined in 2.1091 for satisfying RF exposure compliance.
Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22, Part 24 and Part 27. This device contains functions that are not operational in the U.S. Territories.
This filing is only applicable for U.S. operations. |
1 2 3 | Single Modular Approval. Power output listed is conducted at the antenna terminal.
This device is to be used only for mobile and fixed application, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures.
OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products, and must ensure that the end user has no manual instructions to remove or install this modular.
Endusers must be provided with transmitter operation conditions for satisfying RF exposure compliance.
For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 5 dBi and 3 dBi for below and above 1GHz, respectively, as defined in 2.1091 for satisfying RF exposure compliance.
Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Part 22, Part 24 and Part 27. This device contains functions that are not operational in the U.S. Territories.
This filing is only applicable for U.S. operations |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
SGS TAIWAN LTD.
|
1 2 3
|
Name |
N**** B******
|
1 2 3
|
Telephone Number |
886-2******** Extension:
|
1 2 3
|
Fax Number |
886-2********
|
1 2 3
|
E-mail |
n******@sgs.com
|
|