app
s
|
Applicant Information
|
|
1 2 3
|
Effective |
2015-08-13
|
1 2 3
|
2012-12-14
|
1 2 3
|
2012-12-06
|
1 2 3
|
Applicant's complete, legal business name |
Texas Instruments Incorporated
|
1 2 3
|
FCC Registration Number (FRN) |
0019621945
|
1 2 3
|
Physical Address |
12500 TI Boulevard
|
1 2 3
|
Dallas, Texas 75243
|
1 2 3
|
United States
|
|
app
s
|
TCB Information
|
1 2 3
|
TCB Application Email Address |
V******@tuvam.com
|
1 2 3
|
s******@nemko.com
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2 3
|
Grantee Code |
Z64
|
1 2 3
|
Equipment Product Code |
CC3000EM
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3
|
Name |
M****** L********
|
1 2 3
|
Title |
GM, Embedded Connectivity Solutions
|
1 2 3
|
Telephone Number |
214-5********
|
1 2 3
|
Fax Number |
214-4********
|
1 2 3
|
E-mail |
m******@ti.com
|
|
app
s
|
Technical Contact
|
1 2 3
|
Firm Name |
Texas Instruments
|
1 2 3
|
Name |
F****** R******** W********
|
1 2 3
|
Physical Address |
12500 TI Boulevard, M/S 8669
|
1 2 3
|
Dallas, 75243
|
1 2 3
|
United States
|
1 2 3
|
Telephone Number |
214-5********
|
1 2 3
|
E-mail |
w******@ti.com
|
|
app
s
|
Non Technical Contact
|
1 2 3
|
Firm Name |
Nemko USA, Inc.
|
1 2 3
|
Name |
Z******** G****** M******
|
1 2 3
|
Physical Address |
802 N. Kealy Avenue
|
1 2 3
|
Lewisville, 75057
|
1 2 3
|
United States
|
1 2 3
|
Telephone Number |
214-6********
|
1 2 3
|
Fax Number |
972-4********
|
1 2 3
|
E-mail |
z******@nemko.com
|
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 | Equipment Class | DTS - Digital Transmission System |
1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CC3000EM 802.11b/g Module |
1 2 3 | CC3000MOD |
1 2 3 | Wireless LAN EM board for Module (802.11 bg) |
1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 | Modular Equipment Type | Single Modular Approval |
1 2 3 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
1 2 3 | Change in identification of presently authorized equipment. Original FCC ID: WS2-WG1300E00 Grant Date: 07/10/2012 |
1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 | Grant Comments | Output power listed is conducted. Single Modular approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.
C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR for body and simultaneous transmission use conditions are 0.12 W/kg and 1.55 W/kg respectively. |
1 2 3 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
1 2 3 | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3
|
Firm Name |
DEKRA Testing and Certification, S.A.U.
|
1 2 3
|
Nemko Dallas, Inc.
|
1 2 3
|
Name |
F**** C********
|
1 2 3
|
M******** C********
|
1 2 3
|
Telephone Number |
34-95********
|
1 2 3
|
972-4******** Extension:
|
1 2 3
|
Fax Number |
34-95********
|
1 2 3
|
972-4********
|
1 2 3
|
E-mail |
f******@dekra.com
|
1 2 3
|
m******@nemko.com
|
|