FCC ID: 2AG2K102022 Bodywand I.D.

BRIDGE Remote Controlled C-Shaped Vibrator for targeted G-spot and Clitoral Sensations with 10 Vibration Functions. Create a steady buzz with the independently controlled dual motors or select from 10 dierent vibration modes. Its remote control makes it easy to choose your desired level while you, or your partner, relax and allows this exquisite toy to hit all the right spots. USER GUIDE HOW TO USE HOW TO USE DEVICE POWER ON/OFF REMOTE POWER ON/OFF CHARGING THE DEVICE Hold and press the button for 3 seconds to turn your device on or o. The device will vibrate immediately once turned on. VIBRATION MODES There are 10 adjustable vibration modes for both the insertable base and dual tips. The remote will be automatically paired with the device. Ensure your main device is turned on before using the remote. With your main device turned on. Press the button on the remote to put your device on or o stand by mode. To adjust the insertable bases vibration modes, press the button on your device to cycle through each mode. VIBRATION MODES To adjust the insertable base vibration mode, press the button on your remote to cycle through each mode. Plug in your device into the charging port on the underside of the insertable base using the included USB Pin charging cable. The device will not function while charging, unplug the charger before using the device. Flashing LED Light: Item is charging Solid LED Light: Item is fully charged. It takes approx 100 minutes of charge for up to 60 minutes of use. To adjust the dual tips vibration modes, press the button on your device to cycle through each mode. To adjust the dual tip vibration mode, press the button on your remote to cycle through each mode. REPLACING THE REMOTE BATTERY Slide open the back cover on the remote and replace the coin battery accordingly. Front Vibrating Dual Tips Device Controls Power Button /

Vibration Control Dual Tip Vibration Control Device may be used with or without the remote control. Insertable Vibrating Base Remote Control Ensure the main device is ON before use. CLEANING, STORAGE & SAFETY Always clean and dry your device thoroughly before and after use. DO NOT store wet. We recommend that you use a mild cleanser that is suitable for use with silicone items. Clean the device with a soft, damp cloth. DO NOT clean with an alcohol or chemical-based cleaner. Use water based lubricant as desired. Not compatible with silicone lubricant. Avoid leaving your device in direct sunlight and never expose it to extreme heat. Keep away from water, and never immerse it. Warning: This product contains a battery that is hazardous and is to be kept away from children. The battery can cause serious injuries if it is swallowed or placed inside any part of the body. Seek medical attention immediately if it is suspected the battery has been swallowed or placed inside any part of the body. SPECIFICATIONS Size:

Tamao:

Taille:

Gre:

Weight:

Peso:

Poids:

Gewicht:

Material:

Material:

Matriaut:

Material:

Battery:

Batera:

Batterie:

Akku:

BRIDGE 75mm x 52mm x 90mm 113.3g ABS + Silicone ABS + Silicona ABS + Silicone ABS + Silikon 240mAh SPECIFICATIONS POWER:

3.7V 240mAh USB2.0 WATERRPOOF:

IPX7 (Device Only), for cleaning the device. Not to be used under water. BATTERY LIFE:

100 minutes for up to 60 minutes of use. WARNING For adult use only. For external use only. Any individual who may be pregnant, has a pacemaker, suers from diabetes, phlebitis and/or thrombosis, is at an increased risk of developing blood clots, or who has pins/screws/articial joints or other medical devices implanted in his/her body should consult with a physician before using a massaging device designed for home use. Bodywand shall not be liable for incidental or consequential damages resulting from the misuse of this product. FFC WARNING STATEMENT Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. FFC WARNING STATEMENT DISPOSAL INFORMATION If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the seperation between the equipment and reciever Connect the equipment into an outlet on a circuit dierent from that to which the reciever is connected. Consult the dealer or an experienced radio/TV technician for help Device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, Including interference that may cause undesired operation. Disposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems):

The crossed-out dustbin symbol indicates that these items should not be treated as household waste, but rather brought to the appropriate collection point for recycling electrical and electronic equipment. XGEN, LLC Horsham, PA 19044 All Rights Reserved UK Responsible Person:

ArangaRanga UK LTD, 20-22 Wenlock Road, London, N17 GU, UK. Phone: +44 2037692960, E-Mail: UKresponsibleperson@arangaranga.com EU Responsible Person:

ArangaRanga SL, Paseo de la Castellana 194, Madrid, 28046, Spain. Phone: +34 910054258, E-Mail: EUresponsibleperson@arangaranga.com Email us at sales@xgenproducts.com for any unanswered questions Back

A&H Design Group, Ltd. Section 2.911(d)(5)(i) Certification EquipmentType Company name: A&H Design Group, Ltd. Address: Suite 608,Tower One,Harbour Centre1 Hok Cheung Street,Hung Hom,Kowloon,Hong Kong, Hong Kong, China Product Name: Bodywand I.D. FCCID: 2AG2K102022 Model(s): BW220 2.911(d)(5)(i) EquipmentType We, [A&H Design Group, Ltd.] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered ListNOTE 1 Yours sincerely, Name: Thomas Cheung Date: June 06, 2023 Title: Manager Company name: A&H Design Group, Ltd. Signature:

NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911(d)(5)(i)EquipmentTypeAttestationv1.2

A&H Design Group, Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: A&H Design Group, Ltd. Address: Suite 608,Tower One,Harbour Centre1 Hok Cheung Street,Hung Hom,Kowloon,Hong Kong, Hong Kong, China Product Name:Bodywand I.D. FCCID: 2AG2K102022 Model(s): BW220 2.911(d)(5)(ii) Applicant filing We, [A&H Design Group, Ltd.] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identifiedNOTE 1on the Covered ListNOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Thomas Cheung Date: June 06, 2023 Title: Manager Company name: A&H Design Group, Ltd. Signature:

NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911(d)(5)(ii)ApplicantAttestationv1.3

A&H De A esign Gro d. oup, Ltd Se ection 2.9 911(d)(7)

) USA Ag gent for S Service o of Proce ss Com Add Hom Pro FCC Mod mpany nam dress: Suite m,Kowloon, duct Name CID: 2AG2K del(s): BW2 e: A&H Des 608,Tower Hong Kong

: Bodywand K102022 220 sign Group, r One,Harbo g, Hong Kon d I.D.

, Ltd. our Centre1 ng, China Hok Cheu ng Street,H Hung 2.91 11(d)(7) US SA Designa ated Agent for Service e of Proces ss We, purp

,[A&H Desig pose of acc gn Group, L cepting serv Ltd.] (the a vice of proce pplicant) d ess on beha esignate [X alf of the ap XGEN, LLC]

pplicant.

]NOTE1 for the e App Unit add of o less and Com whic plicant con ted States f dress and em our obligatio s than one y d importation mmission-re chever is la nsent: We A for matters r mail addres on to mainta year after ei n of the app elated admi ater. Acknowledg related to th ss of the des ain an agent ither the gra plicable equ nistrative or ge our conse he applicabl signated ag t for service antee has p uipment with r judicial pro ent to accep le equipmen gent and ac e of process permanently hin the U.S. oceeding in pt service o nt, and at th knowledgeo in the Unite y terminated

., or the con nvolving the of process in n the he physical U.S. ouraccepta nce ed States fo or no d all market ting any nclusion of a t, equipment Age Unit add perm with proc ent obligati ted States f dress and em manently te hin the U.S. ceeding inv ion: We Ac for matters mail addres erminated a

, or the con volving the e cknowledge related to th ssfor no less ll marketing nclusion of a equipment, our obligat he applicab s than one y g and impor any Commis whichever i ion to accep ble equipme year after e rtation of the ssion-relate is later. n the pt service o nt at our ph either the gr e applicable ed administr of process in hysical U.S. rantee has e equipmen t dicial rative or jud USA Com Add HOR A Agent mpany nam dress: 201 P RSHAM, PA e: XGEN, L PRECISION A 19044 Un LLC N ROAD s nited States FCC 003 Con Tele Ema C Registrati 33429945 ntact Name ephone No:

ail: andy@x ion Number r (FRN):

: Mr ANDY

(877) 450-

xgenproduc GREEN

-9436 4026 cts.com pplicant A Company na C ddress: Sui A Centre1 Hok C om,Kowloo H ame: A&H D ite 608,Tow k Cheung St on,Hong Ko Design Grou wer One,Har treet,Hung ng, Hong K up, Ltd. rbour Kong, China FC CC Grantee Contact Nam C elephone N Te mail: thoma E e Code: 2AG me: Thomas No: 00852-2 as.cheung@

G2K s Cheung 23349488

@ahdesigng group.com Sign nature:

S ignature:

2.911(

(d)(7)USAAgen ntv1.2 Title: CEO Date: June 06, 2023 A&H Design Group, Ltd. Title:Manager Date: June 06, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911(d)(7)USAAgentv1.2

A&H Design Group, Ltd. Agent Authorization Company: A&H Design Group, Ltd. Address: Suite 608,Tower One,Harbour Centre1 Hok Cheung Street,Hung Hom,Kowloon,Hong Kong, Hong Kong, China Product Name: Bodywand I.D. Model Number(s): BW220 Product Description: Bodywand I.D. We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: June 06, 2023 Name:

Thomas Cheung Title:

Manager Company:

A&H Design Group, Ltd.

A&H Design Group, Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AG2K102022 Date: June 06, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Thomas Cheung Title: Manager