FCC ID: 2AG2K-TRC-030PUR REMOTE CONTROL BUTTERFLY PANTY VIBE-PUR

OVERVIEW All products by The Rabbit CompanyTM are made from soft, smooth, body safe materials. Our easy to use interface allows users to easily find the right stimulation and intensity. Get ready for sensual satisfaction that can not be matched and will have you craving for more. THE REMOTE CONTROL BUTTERFLY PANTY VIBE 2 THE BUTTERFLY PANTY VIBE WIRELESS REMOTE CONTROL Clitoral Stimulator LED Indicator Power Button Magnetic Charging Contact Increase Intensity Power Button Decrease Intensity 4 5 GETTING STARTED 1. Before first use, charge your butterfly vibe for approximately 1.5 hours. The USB charging cable can be plugged into any USB port or USB/AC power adapter

(not included). Flashing Light = Charging Solid Light = Fully Charged Rapid Flashing Light = Low battery, charge is needed 2. Wash your butterfly vibe with soap and water, or toy cleaner suitable for use with silicone items. 3. Lubricate your butterfly vibe

(if needed) with a water based, silicone compatible lubricant. quickly. The 4. Turn ON your butterfly vibe by pressing light will flash, indicating the power is on and in standby mode. Push vibe to use the manual mode, or push the remote & butterfly vibe. Once in use, the light will change from flashing to solid. again on your butterfly on the remote to pair TOY CLEANER FAQs can be found at www.TheRabbitCompany.com Email us at customercare@TheRabbitCompany.com for any unanswered questions L U B E Y L F T I O N R C E E T L B T U C O L 7 MANUAL CONTROL 1. To turn the item ON quickly press on your butterfly vibe. The A will flash to indicate the power is on. Push again to change the vibration pattern. There are a total of 15 modes using the manual control. 2. To power OFF your butterfly vibe press turn off to indicate the power is OFF. and hold for 2 seconds. LED will 2 1 5. To change the vibration pattern via manual control, press the

. 6. To change the vibration intensity via the remote control press and release

(Increase Intensity) and

(Decrease Intensity). Y L F T I O N R C E E T L B T U C O L HOW TO USE YOUR BUTTERFLY PANTY VIBE Assemble the three adjustable and removable waist and thigh straps (1xwaist, 2xthigh) to butterfly vibe, and dress up accordingly as photo shown while the ON/OFF button faces outside. 8 Adjustable harness included 9 REMOTE CONTROL 1. First turn your butterfly vibe on in standby mode by quickly pressing your butterfly vibe. on 2. While the light is flashing, press power on your remote and to pair the remote & butterfly vibe. to 3. Once the item is paired, the light on the butterfly vibe (A) will become solid and you can control your butterfly vibe by remote. 4. Press and release increase vibration intensity. on the remote to 5. Press and release decrease vibration intensity. on the remote to Y L F T I O N R C E E T L B T U C O L 6. To change the vibration pattern, press and release on the remote. 7. Holding vibration. Quickly pressing vibration. for 3 seconds will pause resumes 8. To turn the item ON/OFF press and release on the remote. 9. To completely turn off your butterfly vibe, press and hold vibe. on your butterfly B U T T E R F LY COLLECTION 10 11 CHARGING CHANGING YOUR REMOTE CONTROL BATTERY Attach the magnetic charging plug to the designated charging area on the base of the product. Flashing light indicates item is charging Solid light indicates item is fully charged Flashing light = Charging The butterfly vibe requires approximately 1.5 hours for full charge Solid light = Fully Charged Use a coin to open the cover by placing it in the slit at the center of the battery cover. Rotate until the battery cover is removed. Open the battery compartment. Button cell CR 2032 has been preinstalled into the remote control. Remove the paper slip inside the battery compartment to activate the power in the remote control. Store the remote control and the battery separately to prolong the battery life. 12 13 VIBRATION PATTERNS TRAVEL LOCK The Rabbit Company items include a travel lock for safe and convenient travel. For the remote:

Simultaneously press and hold the A and A buttons for 3 seconds. Flashing light will indicate the item is locked. To unlock simply press and hold A and A again for 3 seconds. Flashing light will indicate lock is disabled. For the butterfly vibe:

for 5 seconds, flashing Hold light will indicate the item is locked. For unlocking, hold seconds, flashing light will indicate the item is unlocked. again for 5 14 2 3 1 B U T T E R F L Y C O L L E C T I O N 2 3 4 5 1 Vibration pattern 1 Vibration pattern 2 Vibration pattern 3 Vibration pattern 4 Vibration pattern 5 Vibration pattern 6 Vibration pattern 7 Vibration pattern 8 Vibration pattern 9 Vibration pattern 10 Vibration pattern 11 Vibration pattern 12 Vibration pattern 13 Vibration pattern 14 Vibration pattern 15 15 HARE CARETM Cleaning, Storage & Safety 1. Always clean your butterfly vibe thoroughly before and after each use. 2. We recommend using a premium water-based lubricant when needed. Silicone-based lubricants are not recommended and can cause damage to the product. Never use hand cream, or massage oils as lubricants for your intimate areas. 3. To properly clean your butterfly vibe, use a suitable silicone-compatible toy cleanser. If this is not available, wash the silicone area of your butterfly vibe with luke-warm water and an antibacterial soap. Rinse clean and pat dry using a lint-free cloth or towel. Do not use cleaners containing alcohol, petrol or acetone. 16 TOY CLEANER L U B E 4. Avoid leaving your butterfly vibe in direct sunlight and never expose it to extreme heat. 5. Our products are designed to be splash-proof. Never immerse your butterfly vibe in water. If your butterfly vibe appears to function abnormally, turn OFF and consult our customer care section on TheRabbitCompany.com where you will find help tips. Should you require further assistance please contact:

customercare@TheRabbitCompany.com 17 SPECIFICATIONS Materials Body Safe Abs / Silicone Size Butterfly: 58 x 72 mm Remote: 37 x 69 mm Weight Butterfly: 40g Remote: 20g Battery Li-ion 200 mAh Charging 1.5 hours Use Time 1 hour Max Noise Level

<68 db Interface 15 vibration patterns DISPOSAL INFORMATION Disposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems):

The crossed-out dustbin symbol indicates that these items should not be treated as household waste, but rather brought to the appropriate collection point for recycling electrical and electronic equipment. Signed:

RED DECLARATION EC Declaration of Conformity In accordance with EN ISO 17050-1:2004 We: XGEN, LLC of: Horsham, PA 19044 in accordance with the following Directive(s) 2014/53/EU Radio Equipment Directive (RED) Equipment: BUTTERFLY PANTY VIBE hereby declare that:

Branded:

Model No: TRC-030PUR Is in conformity with the applicable requirements of the above directives and the following documents ETSI EN300 220-1 V3.1.1(2017-02) ETSI EN300 220-2 V3.2.1(2018-06) ETSI EN301 489-1 V2.2.3(2019-11) ETSI EN301 489-3 V2.1.1(2019-03) EN62479:2010; EN50663:2017 G. Greene Name:

Position: Manager Date:

01 January 2021 18 19 SUPPLIERS DECLARATION OF CONFORMITY FCC Statement Brand name:

Product name: BUTTERFLY PANTY VIBE Model No: TRC-030PUR This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suppliers Name: XGEN, LLC Suppliers Address: Horsham, PA 19044 Suppliers Phone number: 877-450-9436 Suppliers E-mail address: sales@xgenproducts.com Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 20 This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 21 IMPORTANT SAFETY INFORMATION Do not expose this product to fire or water. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Do not attempt to disassemble the product yourself. Please contact after-

sales service if there is an issue. The battery used in this product is a non-chargeable battery. Do not try to charge it. This product contains small parts such as battery, battery cover. The small parts are not toys, do not allow children to play with them to prevent the risk of suffocation. Risk of safety issue if the battery is replaced by an incorrect type. Replacement of a battery with an incorrect type that can defeat a safeguard. Dispose of used batteries according to instructions. Do not ingest battery. Chemical Burn Hazard!

This product contains a coin/ button battery. If the coin/ button cell is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. This product contains a battery that is hazardous and is to be kept away from children. The battery can cause serious injuries if it is swallowed or placed inside any part of the body. Seek medical attention immediately if it is suspected the battery has been swallowed or placed inside any part of the body. Complete user instructions in additional languages can be found at:

www.TheRabbitCompany.com Sold as a novelty only. Made and packed in China. All rights reserved. The shape and appearance of the products in this guide are a trademark and trade dress of B.C.B.V.I Visit www.trcpatents.com for more info. Designed and Developed by The Rabbit CompanyTM Made in China The Rabbit CompanyTM FAQs can be found at www.TheRabbitCompany.com Email us at customercare@TheRabbitCompany.com for any unanswered questions TheRabbitCompany.com 0

. 1 v

av TH Rabie Sux My og t&CEZ RoHS %

Batch: OKI. Item No: TRC-O30PUR FEFCC ID: 2AG2K-TRC-O30PUR WW QO}

C5266091_X10_Ed.2 A&H Design Group, Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AG2K-TRC-030PUR To Whom It May Concern, Date: 2022-06-07 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of above are withheld from public view for a period of Grant of Equipment Authorization and prior to marketing. short-term Confidentiality, the applicant requests the exhibits selected days from the date of the It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, 1/1 C5266091_X10_Ed.2 Signature:

Name:Thomas Cheung Title:Manager 1/1

C5266091_X8_Ed.1 Letter of Authorization A&H Design Group, Ltd. Company: A&H Design Group, Ltd. Address: Suite 608,Tower One,Harbour Centre1 Hok Cheung Street,Hung Hom,Kowloon,Hong Kong Product Name:REMOTE CONTROL BUTTERFLY PANTY VIBE-PUR Model Number:TRC-030PUR We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del information Carme, s/n, 08193 Bellaterra, Spain, related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. is allowed to forward all Name: Thomas Cheung Date: 2022-06-07 Title: Manager Signature of applicant:

1/1