FCC ID: 2AG2K-BV-031TX VIBRATING JEWEL PLUG

VIBRATING JEWEL PLUG USER GUIDE OVERVIEW ENGLISH GETTING STARTED b-VibeTM products are made with silky smooth, body-safe silicone. Our products are phthalate-free and latex-free. 1. Before first use, The easy to use interface allows users to easily reach their desired stimulation and intensity level. Get ready for sensual satisfaction and exploration that will have you craving for more. Pleasure Tip Powerful Motor Power Button &

LED Indicator A A Vibration Function Button Decrease Intensity A Power Button A Increase Intensity VIBRATING JEWEL PLUG S/M VIBRATING JEWEL PLUG M/L 2 Magnetic Charging Contact WIRELESS REMOTE CONTROL charge your wand for approximately 1.5 - 2 hours. The USB charging cable can be plugged into any USB port or USB/

AC power adapter (not included). Flashing Light = Charging. Solid Light = Fully Charged. Rapid Flashing Light = Low battery, charge is needed. 2. Wash your plug with soap and water or toy cleaner suitable for use with silicone items. 3. Lubricate your plug with a water based, silicone compatible lubricant. TOY CLEANER LUBE 4. Turn ON your plug by pressing A quickly at the bottom of your plug. The light will flash, indicating the power is on and in standby mode. Push A again to use the manual mode, or push A on the remote to pair the remote & plug. Once in use, the base light will change from flashing to solid. 5. To change the vibration pattern via the base control, press the A. Vibration intensity can only be increased via use of the remote control. 6. To change the vibration intensity via the remote control, press and release A (Increase Intensity) and A (Decrease Intensity). Press and release A to change the vibration pattern. 3 MANUAL CONTROL 1. To turn the item ON quickly press A. The A will flash to indicate the power is on. Push again to change the vibration pattern. There are a total of 15 modes using the manual control. Vibration intensity can only be increased via use of the remote control. 2. To power OFF your plug press and hold A for 2 seconds. LED will turn off to indicate the power is OFF. 2 1 REMOTE CONTROL 1. First turn your plug on in standby mode by quickly pressing A on your plug. 2. While the base light is flashing, power on your remote to pair the remote and plug. 3. Once the item is paired the base light will become solid and you can control your plug by remote. 4. Press and release A to increase vibration intensity. 5. Press and release A to decrease vibration intensity. 6. The vibration modes can be changed by pressing and releasing A. 7. To turn the item ON/OFF press and release A on the remote. 8. To completely turn off your plug, you must press and hold A on your plug. TRAVEL LOCK CHARGING YOUR PLUG All b-Vibe items include travel lock for safe and convenient travel. Attach the magnetic charging plug to the designated charging area on the base of the product. Via the remote:

Simultaneously press and hold the A and A buttons for 3 seconds. Flashing light on the remote will indicate the item is locked. To unlock simply press and hold A and A again for 3 seconds. Flashing light will indicate lock is disabled. Via the plug:

Hold A for 5 seconds, flashing light on the base of the plug will indicate the item is locked. For unlocking, hold A again for 5 seconds, flashing light will indicate the item is unlocked. 2 3 1 Flashing light indicates item is charging. Solid light indicates item is fully charged. Rapid flashing indicates charging is required. 4 5 2 3 1 Flashing light = Charging Solid light = Fully Charged 4 5 CHANGING YOUR REMOTE CONTROL BATTERY 1. Slide open the remote control battery compartment as shown. 2. Button cell CR 2032 has been preinstalled into the remote control. 3. Remove the paper slip inside the battery compartment to activate the power in the remote control. 4. Store the remote control and the battery separately to prolong the battery life. WARNING SPECIFICATIONS Do not expose this product to fire or water. Risk of safety issue if the battery is replaced by Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. an incorrect type. Replacement of a battery with an incorrect type that can defeat a safeguard. Leaving a battery in an extremely high temperature Dispose of used batteries according to surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Do not attempt to disassemble the product yourself. Please contact after-sales service if there is an issue. instructions. Do not ingest battery. Chemical Burn Hazard!

This product contains a coin/ button battery. If the coin/ button cell is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from Model Material Height Diameter Weight Battery Vibrating Jewel Plug S / M Vibrating Jewel Plug M / L Body Safe Silicone 98 mm 37 mm 68 g 106 mm 40 mm 85 g 200 mAh 350 mAh The battery used in this product is a non-chargeable children. Charging Time 90 mins 120 mins battery. Do not try to charge it. This product contains small parts such as battery, battery cover. The small parts are not toys, do not allow children to play with them to prevent the risk of suffocation. If the battery compartment does not close securely, stop using the product and keep it away from children. Usage Time 90 mins 90 mins Interface Single Button & Manual Control 4 Button Remote Control 6 7 VIBRATING MODES There are 6 vibration intensities. There are 15 vibration modes, explained below:

Vibration Intensity Vibration Pattern 1. Low Vibration Pattern 1 2. Speed II Vibration Pattern 2 3. Speed III Vibration Pattern 3 4. Speed IV Vibration Pattern 4 5. Speed V Vibration Pattern 5 6. Maximum Vibration Pattern 6 Vibration Pattern 7 Vibration Pattern 8 8 Vibration Pattern 9 Vibration Pattern 10 Vibration Pattern 11 Vibration Pattern 12 Vibration Pattern 13 Vibration Pattern 14 Vibration Pattern 15 CLEANING, STORAGE & SAFETY 1. Always clean your plug thoroughly before and after each use. 2. We recommend premium water-based lubricant. Silicone-based lubricants are not recommended and can cause damage to the product. 3. To properly clean your plug, wash with luke-warm water and a respected antibacterial soap. Rinse clean and pat dry using a lint-free cloth or towel. Do not use cleaners containing alcohol, petrol or acetone. 4. Avoid leaving your plug in direct sunlight and never expose it to extreme heat. TOY CLEANER 5. Do not fully submerse your plug in water. Our products are designed to be splash-proof. This means that a session in the shower or washing in running water will not cause damage, but prolonged exposure such as using in the bath would be harmful. LUBE 6. Never charge your plug while it is wet. Ensure that the charging pins on the base of the plug are completely dry before connecting to the charging cord. If your plug appears to function abnormally, turn OFF and consult our customer care section on bvibe.com, where you will find help tips. Should you require further assistance please contact:

customerservice@bvibe.com 9 RED DECLARATION EC Declaration of Conformity In accordance with EN ISO 17050-1:2004 We: TOPARC TECHNOLOGY (SHENZHEN) CO.,LTD. of: 101 And 1-4 Floors Of Workshop No. 23-1 Longteng Road, Baoan Community, Yuanshan Street, Longgang Shenzhen, CHINA 2014/53/EU Radio Equipment Directive (RED) hereby declare that:

Equipment: VIBRATING JEWEL PLUG Branded:

Model No: BV-031 BLK, BV-030 FUC, BV-030 TL, BV-031 GRN Is in conformity with the applicable requirements of the above directives and the following documents ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 300 220-1 V3.1.1 (2017-02) ETSI EN 300 220-2 V3.2.1 (2018-06) EN 62479 (2010) Signed:

Name:

Position: CEO Date:

Alicia Sinclair 01 January 2020 10 Suppliers Declaration of Conformity Brand name:

Product name: VIBRATING JEWEL PLUG Model No:

BV-031 BLK, BV-030 FUC, BV-030 TL, BV-031 GRN This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Suppliers Name:TOPARC TECHNOLOGY (SHENZHEN) CO.,LTD. Suppliers Address: 101 And 1-4 Floors Of Workshop No. 23-1 Longteng Road, Baoan Community, Yuanshan Street, Longgang Shenzhen, CHINA Suppliers Phone number: +1 212 695 2575 Suppliers E-mail address: info@cotrinc.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution!

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. DISPOSAL INFORMATION Disposal of old electronic equipment (applicable in the EU and other European countries with separate waste collection systems):

The crossed-out dustbin symbol indicates that these items should not be treated as household waste, but rather brought to the appropriate collection point for recycling electrical and electronic equipment. Complete user instructions in additional languages and FAQ can be found at: bvibe.com Email us at customerservice@bvibe.com for any unanswered questions. Designed and Developed by b-VibeTM Made in China b-VibeTM 11 Function OperationFrequency SRD 433.92MHz ThisproductcanbeusedacrossEUmemberstates. ReceiverCategory:1 Max RF outputpower Limit 6.97dBm 10dBm. Importer:xxxxxx Manufacturer'sName:TOPARC TECHNOLOGY (SHENZHEN) CO.,LTD. VIBRATING JEWEL PLUG Modelnumber:BV-031 BLK OperatingTemperature:10Cto40C This device was tested for typical bodyworn operations. To comply with RF exposure requirements,aminimumseparationdistanceof0mmmust bemaintained betweenthe users body and the handset, including the antenna. Thirdparty beltclips, holsters, and similar accessories used by this device should not contain any metallic components. Bodyworn accessories that do not meet these requirements may not comply with RF exposure requirementsandshouldbeavoided.Useonlythesuppliedoranapprovedantenna. This device in compliance with the essential requirements and other relevant provisions of Directive2014/53/EU.Allessentialradiotestsuiteshavebeencarriedout. 1. CAUTION:RISKOFEXPLOSIONIFBATTERYISREPLACEDBYANINCORRECTTYPE.DISPOSEOF USEDBATTERIESACCORDINGTOTHEINSTRUCTIONS ThedevicecomplieswithRFspecificationswhenthedeviceusedat0mmformyourbody 2.

Transmitter label A&H Design Group, Ltd. Model No.: BV-031 BLK Rated: 3.0V (Use CR2030 button cell 1 ) FCC ID: 2AG2K-BV-031TX Made in China

C5266091_X10_Ed.2

< A&H Design Group, Ltd. >

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021-04-12 Subject: Request for Confidentiality FCC ID: 2AG2K-BV-031TX To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFRO.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Short-Term Confidentiality Confidentiality NOME:

ID Label/Location No No Attestation Statement No No External Photos No xl Block Diagram xX Oo

| Schematics xX oO

| Test Report No No

| Test Setup Photos No XI |

| Users Manual [note t x |

| Internal Photos [note t xX |

Parts List / Tune Up / BOM List O oO |

RF Exposure Info No | No |

Operational Description XI | oO |

Cover Letter(s) No | No SDR Software / Security Info Oo | No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See Il. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_ days from the date of the Grant of Equipment Authorization and prior to marketing. 1/1 C5266091_X10_Ed.2 It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, hr Signature:

Name: Moms Liu Title: Manager 1/1

A&H Design Group, Ltd. Family models declaration letter. 2021-04-12 We A&H Design Group, Ltd. Of 6/F, Room 601, Liby Center, Liwan District, No.2 Luju Road, Guangzhou, Guangdong, China Product: VIBRATING JEWEL PLUG Model Name: BV-031 BLK Serial Model: BV-030 FUC, BV-030 TL, BV-031 GRN All the model are the same circuit and RF module, except the model No. and colour. Sincerely, Signature 2021-04-12 Name: Moms Liu Title:Manager

C5266091_X8_Ed.1 Letter of Authorization

< A&H Design Group, Ltd. >

Company: A&H Design Group, Ltd. Address: 6/F, Room 601, Liby Center, Liwan District, No.2 Luju Road, Guangzhou, Guangdong, China Product Name: VIBRATING JEWEL PLUG Model Number: BV-031 BLK, BV-030 FUC, BV-030 TL, BV-031 GRN FCC Identifier: 2AG2K-BV-031TX We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Moms Liu Date: 04/12/2021 Title: Manager

[ons Ge Signature of applicant:

1/1