FCC ID: 2AG2KLY124R01-010 Vibrator

A&H Design Group, Ltd Specification Item NumberLY124R01-010 Prepared by No 20191009 Audit by Version Ver1.0 Li Li Approve by Jiang Effective date 2019.10.09 Historical modification record Version Modify the content Modifier Date Issued V1.0 2019/10/9 NO 1 2 1 4 3 4 5 6 7 8 9 10 11 12 d i a g r a m a p p e a r a n c e S t r u c t u r a l Item Name Rechargeable Remote Control eggs Item No LY124R 01 Product size Remote control75.7*40.6 MM Eggs70*34 Product Weight(g) Remote control:1 8 Product specification parameters 2 4 No Item Remark Specifications 1. Long press 1.5 seconds to turn on the vibrating egg, and the indicator light flashes to enter standby mode. 2. In standby mode, press the opening key of the vibrating egg (or the button of the remote control) to turn on the vibration; Then short press the conversion mode, a total of 5 weakly imposed 5 frequency conversion mode, cyclic conversion. 3. Long press the button of remote control for 1.5 seconds to turn off vibration and enter standby mode. 4. long press 1.5 seconds vibration egg on key, shut down. 5. USB+2.5DC plug-in charging (vibrator or remote control). The indicator light flashes when charging and lights long after it is full. DC 3.7V(LDX 751524 Polymer lithium battery)220mah At least 6m 10uA 20MA 10uA DC:3.7V (LDX-751524 polymer lithium battery 220mah) Low speed:180mA;Medium speed:220 mA;High speed:300mA Low speed:3500rpm;Medium speed::6500rpm;High speed:10000 rpm 10%

10%

1000010rpmDC3.7V Direct electrical test Radius D8*6 ungsten eccentric. 3 4 1 Product features 2 3 4 5 6 7 8 9 10 11 Remote control Uses batteries Remote control distance Standby current of remote control Operating current of remote control Vibrator Uses batteries Machine standby current Machine operating current Output motor current The motor rotates in the product Motor eccentric dimensions 0.05V The motor model USB charging voltage/current requirement Charging current Product charging time N20-10160 DC 5V 1A 220MA About 2 hours 12 13 14 15 16 17 18 19 Product battery life vibrator:45 minutes(Min) ,Remote control:

minimum 10 hours (long press test) Maximum speed test Motor service life Minimum 72 hours (dc3.7V direct power, 30 minutes pause every 4 hours) Product materials Product waterproofing grade The product is made of environment-friendly ABS plastic, and the vibrator is made of food-

grade silicone Vibrator:IPX7 Remote control:IPX0 4 4 FCC ID: 2AG2KLY124R01-010 FCCCaution Thisdevicecomplieswithpart15oftheFCCRules.Operationissubje followingtwoconditions:(1) Thisdevicemaynotcause thisd evice must acceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. ctt othe harmfulinterference,and(2) AnyChangesormodifi compliance couldvoidtheuse r'sauthoritytooperatetheequipment. cationsnotexpre sslya pprovedbythepartyr esponsiblefor gyand,if itsforaClass not uctions,maycause harmfulinterference theFCCRules .Theselimitsaredesignedto ticularinstall ation.Ifthisequipmentdoescause Note: Thisequip ment hasbeentestedandfoundtocomplywiththelim Bdigitaldevice,pursu anttopart15of providereasonableprotec tiona gainstharmfulinterfere nceinaresidentialinstallation. Thisequi pmentgeneratesusesandcanradiateradiofrequencyener installedandusedinaccordancewiththeinstr torad iocommunications.However,thereisnoguaranteethatinterferencewillnot occurinapar radio ortelevisionrece ption,which canbedeterminedbyturnin andon,theuserisencouragedtotr followingm easures:

-Reorientorrelocatetherec

-Increasetheseparationbetw eentheequipment andrec eiver.

-Connecttheequi pmentintoanoutletonacircuitdifferentfromthattowhichthe receiverisconnected.

-Consultthedea leroranexperie ncedrad io/TVtechnicianf orhel p. harmfulinterferenceto gtheequipmentoff erencebyoneormoreofthe ytocorrecttheinterf eivingantenna. This equipmentcom plieswithFCC uncontrolledenviro nment. radiation exposure limits setfor thfo ran

C5266091_X10_Ed.2 A&H Design Group, Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date:

Dec.25.2020 Subject: Request for Confidentiality FCC ID: 2AG2KLY124R01-010 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality NOTE 2 No No No No No No No NOTE 1 NOTE 1 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: Moms Liu Title: Manager 1/1

A&H Design Group, Ltd Model Difference Model name: LY124R01-010, LY88R01-010, LY72R01-010, LY89R01-010 All the model are the same circuit and RF module, only different for model name. Product description: Vibrator Trade Name: N/A FCC ID: 2AG2KLY124R01-010 Regards Sincerely Clients signature:

Clients name / title : Moms Liu (Manager) Contact information / address: 6/F, Room 601, Liby Center, Liwan District, No.2 Luju Road, Guangzhou, Guangdong, China, 510370

C5266091_X8_Ed.1 Letter of Authorization A&H Design Group, Ltd. Company: A&H Design Group, Ltd. Address: 6/F, Room 601, Liby Center, Liwan District, No.2 Luju Road, Guangzhou, Guangdong, China, 510370 Product Name: Vibrator Model Number: LY124R01-010 FCC Identifier: 2AG2KLY124R01-010 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Moms Liu Title: Manager Date: Dec.25.2020 Signature of applicant:

1/1