dsimole BluStream FM User Manual
=a Pb Bes ABOUT THIS PRODUCT FM Transmitter for Hands-Free Calling and Streaming Audio through your Car's Speakers Features
+ Works with any FM radio
* Compatible with a wide variety of smartphones and tablets
+ Built-in microphone so you can conveniently receive and make calls hands-free while still enjoying your music
- Easy to connect, easy to use Did You Know: BluStream FM can pair up to 5 devices in its memory, and connect to 2 devices simultaneously!
BOX CONTENTS Be careful when removing all items from the packaging tray. Take care not to tug or pull on cables. BluStream FM transmitter BluStream module with control
(A) button and built-in mic (B) Plug into your car's 12v socket Mounts onto your vehicle's
(cig port) dash Preset scan button **
Forward scan Back button scan button Press and hold, auto scans all frequencies USB charging port
(charging cable not included) dsimple INSTALLATION SETUP iSimple knows that your car dash might look different than this illustration. Placement of product will vary per year/make/model of your vehicle. INSTALLATION INSTRUCTIONS BluStream FM needs a little power to rock your world, so plug the FM transmitter (A) into your 12V power outlet
(cigarette port). Step 2 Mount your BluStream FM module (B) with the included adhesive tape to clean, smooth surface. NOTE: Make sure you are parked in a safe spot before installation or whenever you are pairing a device. NEVER WHILE DRIVING. TUNING/SETTING THE RADIO STATION
(UP TO 3 PRESETS CAN BE STORED) Step 1 Tune your car's FM radio to a unused frequency that does not have a station broadcasting... just static.
- Se Pi Step 2 te a Oe) D> Using the left and right buttons on the FM Transmitter (A), a ist Ul iy
S/, set the frequency to match the selected frequency on your radio. Note: if you pause on a station for longer than 5 seconds, it will be stored as a preset Parse Ii tt i PAIRING GUIDE Make sure the Control Button LED is flashing blue/red. (If it's not flashing, the unit turned off/timed out. The user will need to press the Control Button to turn on.) The unit shuts off automatically in 5 minutes. Pairing BT43IS rRevc to Your Phone My Devices BlustreamFM Open the Bluetooth menu on your smartphone, and scan Paired for available Bluetooth devices. Find BluStreamFM" from the list, and select Connect. Lght flashes blue/red when in pairing mode and then solid blue when initial connection is made. Then flashes blue when device is paired and connected.
(No Pairing Code is Required) Steps to add up to 4 additional devices: Disconnect any actively paired device. Control Button LED (B) will begin flashing blue/red, pair new device using above steps. NEED TO CHARGE YOUR DEVICE AT THE SAME TIME? HERES HOW!
aa USB Charging Port BluStream FM features a 5 volt 2.4A charging port which can be used to charge your smartphone, or other device
(charging cable not included). Simply insert your USB charging cable into the charging port on the BT43IS Revc. CALLING INSTRUCTIONS How to Make Calls Using Your BT43IS revc Make sure your phone is paired, and radio and transmitter are set to same channel to hear music and phone calls from your phone. To diala phone number use your phone's keypad or simply activate Voice Recognition by pressing and holding Control Button (B.) See below chart for how to accept/answer and end calls. Action Description ACCEPT/END CALLS Press (B) control button once If using optional visor extended mic, use same steps as above for calling control with phone button. REDIAL LAST CALL Press (B) control button three times If using optional visor extended mic, use same steps as above for calling control with phone button. HOW TO PLAY YOUR PHONE'S AUDIO On your device, access your music/media player of choice. Adjust the volume using your device and radio volume, the audio will play through the channel selected. CONTROL BUTTON FUNCTIONS Action Description PLAY/PAUSE Press button once FORWARD TRACK Press button twice ACTIVATE VOICE RECOGNITION Press button and hold Adjust the volume using your device and radio volume. CABLE MANAGEMENT Step 1 Slide the back cover on module (A) up to remove it Step 2 Remove the cable from under the tab and start winding clockwise around the center Step 3 Tuck the cable back under the tab when you are finished and replace the back cover ABOUT AUTO-CONNECT/SHUT-OFF BT43IS rev will auto-connect after the first pairing BT43IS rev c will auto shut-off after 5 minutes if not being used to conserve battery. How to Reconnect with BT43lS rRevc If the 12v port turns on/off with your ignition key, it will automatically turn on. But if the 12v port is constantly on, you will need to press the Control Button (B) to power up. a SAFETY WARNING Please Read!
This equipment may be reset by unintentional electrostatic discharge during operation. Exposure to direct sunlight or extreme heat may cause damage or malfunction. FCC Class B Radio Frequency Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, more of the following measures:
1. Re-orientate or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that of which the receiver is connected 4, Consult the dealer or an experienced radio / television technical for help. NOTICE: The changes of modifications not expressly approved by the party responsible compliance could void the user authority to operate the equipment Technical Support US EU AAMP Global AAMP Global UK Tel: 866-788-4237 Tel.: +01-800-477-2267 support@iSimple.com support@iSimple.com www.iSimple.com www.iSimple.com FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC RF exposure statement:
The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. FCC ID: XBD-BT43ISC dsimole www.iSimple.com facebook.com/isimplesolutions iSimple 2019