WHITESTAR SIGNATURE PRO System 8 Error Messages Troubleshooting and Diagnostics 513 IV Pole communications error. Probable cause: Communication error. Corrective action:
1. Prime the system. 2. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. 514 IV Pole error. Probable cause: Communication error. Corrective action:
1. Prime the system. 2. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. 515 IV Pole calibration error. Probable cause: Communication error. Corrective action:
1. Run Self Test. 2. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. 516 IV Pole communication error. Probable cause: Communication error. Corrective action:
1. Prime the system. 2. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. RX Only NGP Z370500 Rev. B 1116 8-38 WHITESTAR SIGNATURE PRO System 8 Error Messages Troubleshooting and Diagnostics 517 IV Pole is jammed. Probable cause:
IV Pole motor failure. There is an obstruction that does not allow the IV pole to move. Corrective action:
1. Check the IV pole for obstructions. 2. Prime the system. 3. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. 601 Tune excessive vacuum error. Probable cause: There is too much vacuum. Corrective action:
1. Check tubing connections. 2. Check the handpiece. Replace the tip if needed. 3. Retune the handpiece. 4. If the error still does not clear, replace the handpiece with a new handpiece, and tune the handpiece. 5. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. 605 Tune no handpiece error. Probable cause: Hardware failure. Corrective action:
1. Attach handpiece to the system. 2. Retune the handpiece. 3. If the error still does not clear, replace the handpiece with a new handpiece, and tune the handpiece. 4. If the error still does not clear or if the error continues to occur, document the error message and contact AMO for technical service. RX Only NGP Z370500 Rev. B 1116 8-39 9 WARRANTY AND MAINTENANCE Warranty Statement RX Only NGP Z370500 Rev. B 1116 9-1 WHITESTAR SIGNATURE PRO System 9 Warranty and Maintenance Warranty Statement Abbott Medical Optics Inc. warrants for a period of one year (12 months) from the date of installation of the WHITESTAR SIGNATURE PRO System console, foot pedal, wireless remote control, the programmable power pole, and the phaco handpiece to be free from defects in materials and workmanship when properly installed, maintained, and used for the intended purpose. In no event shall the date of installation be deemed to occur later than six months from the date of delivery of the WHITESTAR SIGNATURE PRO System by Abbott Medical Optics Inc. to the common carrier. You are required to provide AMO with prompt written notice of any defect or defects and permit AMO to have access to the WHITESTAR SIGNATURE PRO System within a reasonable time after notification of any defect. In the event that you do not provide AMO with prompt notification of a defect or permit access to the WHITESTAR SIGNATURE PRO System within a reasonable time after notification, AMO is hereby released from all liability with reference to such defect and subsequent damage, if any, resulting from the inability of AMO to correct such defect. MISUSE AND MISHANDLING ARE NOT COVERED UNDER WARRANTY. AMOs sole obligation is to repair or replace, at AMOs option, the defective part(s), which shall be returned freight prepaid to AMO by you and then returned to you freight collect once repaired or replaced. The irrigation/aspiration handpiece set, diathermy forceps and diathermy cord are warranted for ninety (90) days. This warranty applies only to the original purchaser/user of the device and may not be transferred. This warrant will be void if and only so long as the equipment is used in any country other than the country to which it was originally shipped by AMO. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL AMO BE LIABLE TO THE PURCHASER/USER FOR CONSEQUENTIAL, SPECIAL, INCIDENTAL, OR PUNITIVE DAMAGES, LOSS OF PROFITS OR LOSS OF USE. The liability of AMO for breach of this warranty shall, in any case, be limited to the total amount paid by you for the WHITESTAR SIGNATURE PRO System furnished by AMO and any work performed by AMO in connection therewith. Extended Warranty Extended warranty contracts (excluding the phaco handpiece) are available. Contact AMO for information on the availability of an extended warranty contract. Note:
If outside the United States, contact your local AMO office or representative for warranty information. RX Only NGP Z370500 Rev. B 1116 9-2 WHITESTAR SIGNATURE PRO System 9 Warranty and Maintenance Maintenance User maintenance of the WHITESTAR SIGNATURE PRO System is only for those adjustments and corrective actions in the Error Messages and Troubleshooting, and Diagnostics sections of this manual. There are no user serviceable components within the console and you must not attempt to access the internal components. Any attempt to do so will void the warranty. AMO recommends, at least annually, routine or periodic maintenance of the WHITESTAR SIGNATURE PRO System by an AMO representative. AMO recommends the measurement of PE resistance and leakage current according to IEC 601-1 every two years. If a problem continues following setup, check-out and troubleshoot as per the procedures in this manual, then contact AMO for corrective action
(1-877-AMO-4-LIFE in USA 1-877-266-4543 or 1-800-511-0911 for outside the USA). RX Only NGP Z370500 Rev. B 1116 9-3 10 SPECIFICATIONS Physical Specifications Environmental Specifications Electrical Specifications Phacoemulsification Specifications Irrigation and Aspiration Specifications Vitrectomy Specifications Diathermy Specifications Diathermy Power Graphs Diathermy Power versus Load Impedance Phaco Power Graphs Phaco Tip Velocity Bottle Height Pressure RX Only NGP Z370500 Rev. B 1116 10-1 WHITESTAR SIGNATURE PRO System 10 Specifications Physical Specifications Table 10.1 System Physical Specifications WHITESTAR SIGNATURE PRO System Console Console dimensions (with display) Power cord length Electrical enclosure current leakage Weight (including IV pole) Foot Pedal Single Linear Foot Pedal Dimensions Weight Advanced Control Pedal Dimensions Weight Cord Length Advance Linear Pedal Dimensions Weight Cord Length Programmable IV Pole Maximum travel Velocity Maximum lift weight Width Depth Height Width Length Height Width Length Height Width Length Height English / U.S. Metric:
24 inches 24 inches 59 inches 20 feet IEC 60601-1 compliance UL 60601-1 185 pounds 12 inches 10.5 inches 5.5 inches 10.0 pounds 10.5 inches 14 inches 5.5 inches 15 pounds 11.8 feet 9.82 inches 15.57 inches 4.88 inches 13 pounds 12 feet 61 cm 61 cm 150 cm 6 meters 84 kg 31 cm 27 cm 14 cm 4.5 kg 27 cm 36 cm 14 cm 7 kg 36 cm 25 cm 39.6 cm 12.4 cm 5 kg 366 cm 41 inches 2.4 inches/sec 2.43 pounds 106 cm 6 cm/sec. 1.1 kg RX Only NGP Z370500 Rev. B 1116 10-2 WHITESTAR SIGNATURE PRO System 10 Specifications Wireless Remote Control English / U.S. Metric:
Width Length Height Weight 5 inches 5 inches 1.5 inches 2.0 pounds 13 cm 13 cm 4 cm
.9 kg Environmental Specifications Table 10.2 Environmental Specifications Environmental Specifications Storage/Transportation Conditions Operating Temperature Humidity Ambient Pressure Storage Temperature Humidity 10 to 40C Up to 95% RH, non-condensing See Vitrectomy Specifications for additional information.
-20 to 60C Up to 95% RH, non-condensing Electrical Specifications Voltage Table 10.3 Electrical Specifications Frequency Rated Power Fuse Rating System 100-240 Vac 50-60 Hz 750 VA 6.3A, 250V, Bussman GDA Enclosure Current Leakage
<500 A Phacoemulsification Specifications Table 10.4 Phacoemulsification Specifications Phaco Power Peristaltic Pump Vacuum Level Pump Flow Rate Vacuum Level Venturi Pump 1%-5% in 1% increments, 5-100%, in 5% increments 0650 mmHg in 5 mmHg increments 0-60 cc/minute 0-600 mmHg in 5 mmHg increments RX Only NGP Z370500 Rev. B 1116 10-3 WHITESTAR SIGNATURE PRO System 10 Specifications Irrigation and Aspiration Specifications Vitrectomy Specifications Table 10.5 Irrigation and Aspiration Specifications Peristaltic Pump Vacuum Level Venturi Pump Pump Flow Vacuum Level Table 10.6 Vitrectomy Specifications Peristaltic Pump Vacuum Level Pump Flow Rate Venturi Pump Vacuum Level 0650 mmHg in 5 mmHg increments 0-60 cc/minute 0-600 mmHg in 5 mmHg increments 0650 mmHg in 5 mmHg increments 10-60 cc/minute, in 1 cc increments 0-600 mmHg in 5 mmHg increments Atmospheric Pressure/Altitude Indicated Cut Rate 2500 Density Altitude (DA) conditions are 2,500 cpm from sea level to 3,000 feet (914.4 m) elevation and shall be de-rated by 100cpm per 1,000ft (304.8 m) additional elevation up to a maximum of 10,000 ft above sea level. Actual Cut Rate Upper Limit (cpm) 3000 Actual Cut Rate Lower Limit (cpm) 2000 RX Only NGP Z370500 Rev. B 1116 10-4 WHITESTAR SIGNATURE PRO System 10 Specifications Diathermy Specifications Table 10.7 Diathermy Specifications Power Adjustment Diathermy Power (maximum power into rated load) Diathermy Type Rated Peak Voltage Connector of diathermy forcep/
probe 5% to 100%, in 5% increments 8.5 Watts into 350 Ohms 386 kHz Bipolar 160 Volts
.072 RECEPTACLE (2) All measurements are in inches. RX Only NGP Z370500 Rev. B 1116 10-5 WHITESTAR SIGNATURE PRO System 10 Specifications Diathermy Power Graphs Figure 10.1 Diathermy Output Power (Typical) 10 Ohm Y Axis = Watts X Axis = Settings Figure 10.2 Diathermy Output Power (Typical) 50 Ohm Y Axis = Watts X Axis = Settings RX Only NGP Z370500 Rev. B 1116 10-6 WHITESTAR SIGNATURE PRO System 10 Specifications Figure 10.3 Diathermy Output Power (Typical) 200 Ohm Y Axis = Watts X Axis = Settings Figure 10.4 Diathermy Output Power (Typical) 350 Ohm Y Axis = Watts X Axis = Settings RX Only NGP Z370500 Rev. B 1116 10-7 WHITESTAR SIGNATURE PRO System 10 Specifications Figure 10.5 Diathermy Output Power (Typical) 500 Ohm Y Axis = Watts X Axis = Settings Figure 10.6 Diathermy Output Power (Typical) 1000 Ohm Y Axis = Watts X Axis = Settings RX Only NGP Z370500 Rev. B 1116 10-8 WHITESTAR SIGNATURE PRO System 10 Specifications Diathermy Power versus Load Impedance Figure 10.7 Diathermy Output Power (50% Setting) Y Axis = Watts X Axis = Impedance (Ohms) Figure 10.8 Diathermy Output Power (100% Setting) Y Axis = Watts X Axis = Impedance (Ohms) RX Only NGP Z370500 Rev. B 1116 10-9 WHITESTAR SIGNATURE PRO System 10 Specifications Phaco Power Graphs Figure 10.9 Longitudinal Phaco Power Y Axis = Output Power (Watts) X Axis = GUI Settings %
Figure 10.10 ELLIPS FX Phaco Power Linear Mode Y Axis = Power (Watts) X Axis = GUI Settings %
RX Only NGP Z370500 Rev. B 1116 10-10 WHITESTAR SIGNATURE PRO System 10 Specifications Phaco Tip Velocity Nominal Velocity for the ELLIPS FX handpiece and the WHITESTAR handpiece at 100% power, continuous, with the OPOR3020L phaco tip is shown in the following table. Handpiece ELLIPS FX (690880 (A)) WHITESTAR (690697 (A)) Nominal Longitudinal Velocity (m/s) 8.85 11.13 Bottle Height Pressure The WHITESTAR SIGNATURE PRO System has a built in IV pole to generate positive pressure using balanced salt solution to provide positive irrigation fluid. Measurement points:
All measurements are taken with a pressure meter at the same height as the pressure sensor in the WHITESTAR SIGNATURE PRO System. This position is defined as 41 inches or 101.6 cm from the floor. 1. Center of Drip Chamber 2. Center of pressure sensor is 41 inches or 104.2 cm from the floor RX Only NGP Z370500 Rev. B 1116 10-11 WHITESTAR SIGNATURE PRO System 10 Specifications An IV bottle height reported as 0 cm includes an offset of 7.9 inches or 20 cm to make sure that a positive pressure is always provided. Table 10.8 Expected Pressure as a function of Bottle Height Bottle Height cm Theoretical Pressure mmHg Corrected Pressure At 0 20 40 60 80 100 105 0.00 14.80 29.60 44.40 59.20 74.00 77.70 Patient Eye Level mmHg 14.80 29.60 44.40 59.20 74.00 88.80 92.50 RX Only NGP Z370500 Rev. B 1116 10-12 11 ACCESSORIES AND PARTS REORDERING Accessories and Parts List RX Only NGP Z370500 Rev. B 1116 11-1 WHITESTAR SIGNATURE PRO System 11 Accessories and Parts Reordering Table 11.1 WHITESTAR SIGNATURE PRO System Part Number Name WHITESTAR SIGNATURE PRO Console Description An ophthalmic microsurgical system. Part number NGP680301 List of Accessories with Part Numbers The following table is a list of accessories that you can use to reorder parts for your WHITESTAR SIGNATURE PRO System. Your AMO representative can advise you of recommended inventory levels based your facility's volume of phacoemulsification procedures. You can order any of the items listed below through your AMO representative or directly through AMO customer service. Your AMO representative can confirm the availability of these items in your area. Table 11.2 Accessories and Parts List System Accessories Phaco Handpiece Part Number Description 690697 WHITESTAR Phaco Handpiece, Coaxial 690880 OPOR0019L OPOR1519L OPOR3019L OPOR4519L OPOR0020L OPOR1520L OPOR3020L OPOR4520L OPOCR3019L OPOCR3020L OPOS19L OPOS20L OPOMTWL OPOIA20CRV OPOIA2045D OPOIA20STR OPOIA20KIT OM055002 OM05510110 ELLIPS FX Phaco Handpiece 19 Gauge LAMINAR Flow Phaco Tip, 0 Round Tip 19 Gauge LAMINAR Flow Phaco Tip, 15 Round Tip 19 Gauge LAMINAR Flow Phaco Tip, 30 Round Tip 19 Gauge LAMINAR Flow Phaco Tip, 45 Round Tip 20 Gauge LAMINAR Flow Phaco Tip, 0 Round Tip 20 Gauge LAMINAR Flow Phaco Tip, 15 Round Tip 20 Gauge LAMINAR Flow Phaco Tip, 30 Round Tip 20 Gauge LAMINAR Flow Phaco Tip, 45 Round Tip Disposable LAMINAR Flow Phaco Tip, 19 Gauge, 30 Curved Disposable LAMINAR Flow Phaco Tip, 20 Gauge, 30 Curved 19 Gauge LAMINAR Flow Irrigation Sleeve and Test Chamber 20 Gauge LAMINAR Flow Infusion Sleeve and Test Chamber LAMINAR Flow Tip Wrench SOLO I/A Handpiece, 20 Ga., Curved Silicone Sleeve Tip SOLO I/A Handpiece, 20 Ga., 45 Silicone Sleeve Tip SOLO I/A Handpiece, 20 Ga., Straight Silicone Sleeve Tip SOLO I/A Handpiece Kit PHACOFIT Titanium Handle PHACOFIT I/A Tip Curved 0.5 mm Port RX Only NGP Z370500 Rev. B 1116 11-2 I/A Handpiece WHITESTAR SIGNATURE PRO System 11 Accessories and Parts Reordering System Accessories Diathermy Handpiece Vitrectomy Cutter Part Number Description OM05510112 OM05510113 OM05510114 OM05510115 OM05510116 OM0551011 OM0551012 OM0551013 OM0551014 OM0551015 OM0551016 OM0551017 OM0551018 OM0551019 OM0551020J OM0551021J DUA02020 DU02100 DU02200 DU02301 DU02302 DU02303 DU02305 DU02325 DU02335 SCP680600 K121085 K147000 NGP0020 NGP0023 NGP0025 PHACOFIT O-Ring's I/A Tip (5PK) PHACOFIT Titanium, Multi-Tip Set PHACOFIT Cleaning/Flushing Kit PHACOFIT Tip, Luer Adapter (Aspiration) PHACOFIT Tip, 45 Degree Silicone (No Sleeve) PHACOFIT I/A Tip Straight 0.3 MM Port PHACOFIT I/A Tip Curved 0.3 mm Port PHACOFIT I/A Tip 45 Degree 0.3 mm Port PHACOFIT I/A Tip 90 Degree 0.3 mm Port PHACOFIT I/A Tip Binkhorst 0.3 mm Port PHACOFIT I/A Tip Straight SI 0.3 mm Port PHACOFIT I/A Luer Adapter, F/F PHACOFIT I/A Tip Curved, SI, 0.3 mm Port PHACOFIT I/A Tip Straight 0.5 MM Port PHACOFIT Athlete I/A Tip Straight Type PHACOFIT Athlete I/A Tip 45 Degree Type DUET STARTER KIT, 20GA DUET ASPIRATION HANDLE DUET IRRIGATION HANDLE DUET 20G CURVED IRRIGATOR CLOSED END DUET 20G CURVED ASPIRATION 0.3MM PORT CAP POL DUET 19G FINE IRRIGATING CHOPPER DUET 20G OLSON II IRRIGATING CHOPPER DUET MST Aguirre Duet Tip DUET MST Fine/Nagahara Tip Diathermy Power Cable Bipolar Forceps, Curved Iris 0.5 mm Tip 18 Gauge Straight Diathermy Pencil, reusable 20 gauge Vitreous Cutter 23 gauge Vitreous Cutter 25 gauge Vitreous Cutter RX Only NGP Z370500 Rev. B 1116 11-3 WHITESTAR SIGNATURE PRO System 11 Accessories and Parts Reordering System Accessories FUSION Pack Wireless Remote Control Foot Pedal Miscellaneous Operators Manual Part Number Description OPO70 FUSION Pack (disposable, sterile) OPO71 NGP680137 0100-1834 NGP680701 NGP680702 NGP680703 0100-1835 0100-0055 FUSION Dual Pump Pack (disposable, sterile) WHITESTAR SIGNATURE PRO System Remote Control AC Charger, SIGNATURE Wireless Remote WHITESTAR SIGNATURE System Single Linear Foot Pedal WHITESTAR SIGNATURE System Advanced Control Pedal WHITESTAR SIGNATURE PRO System Advanced Linear Foot Pedal AC Charger, SIGNATURE Wireless Foot Pedal CABLE ASSY, WHITESTAR SERIES FOOT PEDAL
(Single Linear Foot Pedal and Advanced Control Pedal) Cable Assy, Advanced Linear Foot Pedal to Console, Signature LI-BATTERY, SIGNATURE PRO Advanced Linear Pedal Power cord, hospital grade, 20 ft., 6.1 meters I/A Cleaning Kit WHITESTAR SIGNATURE System Dust Cover Sterilization Tray 0100-6303 0100-1836 2410-0049-L OM05510114 0100-0750 MSR309 NGP Z370494 WHITESTAR SIGNATURE PRO System Operators Manual
(Bulgarian) NGP Z370495 WHITESTAR SIGNATURE PRO System Operators Manual
(Chinese) NGP Z370496 WHITESTAR SIGNATURE PRO System Operators Manual
(Czech) NGP Z370497 WHITESTAR SIGNATURE PRO System Operators Manual
(Croatian) NGP Z370498 WHITESTAR SIGNATURE PRO System Operators Manual
(Danish) NGP Z370499 WHITESTAR SIGNATURE PRO System Operators Manual
(Dutch) NGP Z370500 WHITESTAR SIGNATURE PRO System Operators Manual
(English) NGP Z370501 WHITESTAR SIGNATURE PRO System Operators Manual
(Estonian) NGP Z370502 WHITESTAR SIGNATURE PRO System Operators Manual
(Finnish) NGP Z370503 WHITESTAR SIGNATURE PRO System Operators Manual
(French) RX Only NGP Z370500 Rev. B 1116 11-4 WHITESTAR SIGNATURE PRO System 11 Accessories and Parts Reordering System Accessories Part Number Description NGP Z370504 WHITESTAR SIGNATURE PRO System Operators Manual
(German) NGP Z370505 WHITESTAR SIGNATURE PRO System Operators Manual
(Greek) NGP Z370506 WHITESTAR SIGNATURE PRO System Operators Manual
(Hungarian) NGP Z370507 WHITESTAR SIGNATURE PRO System Operators Manual
(Italian) NGP Z370508 WHITESTAR SIGNATURE PRO System Operators Manual
(Japanese) NGP Z370509 WHITESTAR SIGNATURE PRO System Operators Manual
(Korean) NGP Z370510 WHITESTAR SIGNATURE PRO System Operators Manual
(Latvian) NGP Z370511 WHITESTAR SIGNATURE PRO System Operators Manual
(Lithuanian) NGP Z370512 WHITESTAR SIGNATURE PRO System Operators Manual
(Norwegian) NGP Z370513 WHITESTAR SIGNATURE PRO System Operators Manual
(Polish) NGP Z370514 WHITESTAR SIGNATURE PRO System Operators Manual
(Portuguese) NGP Z370515 WHITESTAR SIGNATURE PRO System Operators Manual
(Portuguese-Brazilian) NGP Z370516 WHITESTAR SIGNATURE PRO System Operators Manual
(Romanian) NGP Z370517 WHITESTAR SIGNATURE PRO System Operators Manual
(Russian) NGP Z370518 WHITESTAR SIGNATURE PRO System Operators Manual
(Serbian) NGP Z370519 WHITESTAR SIGNATURE PRO System Operators Manual
(Slovakian) NGP Z370520 WHITESTAR SIGNATURE PRO System Operators Manual
(Slovenian) NGP Z370521 WHITESTAR SIGNATURE PRO System Operators Manual
(Spanish) NGP Z370522 WHITESTAR SIGNATURE PRO System Operators Manual
(Swedish) NGP Z370523 WHITESTAR SIGNATURE PRO System Operators Manual
(Turkish) RX Only NGP Z370500 Rev. B 1116 11-5 WHITESTAR SIGNATURE PRO System 11 Accessories and Parts Reordering System Accessories Part Number Description NGP Z370526 WHITESTAR SIGNATURE PRO System Operators Manual
(Traditional Chinese) NGP Z370524 WHITESTAR SIGNATURE PRO System Operators Manual CD, Multilingual RX Only NGP Z370500 Rev. B 1116 11-6 12 INDEX A Accessories 11-1 Add a Surgeon 4-3 Advanced Control Pedal 1-4, 1-18, 2-5, 10-2 Calibration 4-23 Connections 4-17 Default Settings 4-16 Setup 4-16 Switch Assignment 4-17 Testing 4-23 Threshold Configuration 4-22 Advanced Linear Pedal 1-4, 2-5 Battery Replacement 8-4 Connections 4-25 Handle 2-7 Setup 4-25 Switch Assignment 4-26 Test 4-32 Threshold Configuration 4-30 Anterior chamber too deep 8-9 Anterior Segment Surgery 3-2 Aspiration Specifications 10-4 Aspiration Rate Occlusion 5-24 Assign Order Program 5-29 Surgeon 4-35 B Back-light button 8-7 Backup All 6-21 Balance Irrigation/Aspiration 3-14 Batteries Battery Remote control 2-9 Charging 4-16, 4-25, 8-6 Replacement 8-4 Begin Tune 3-13 Blocked Aspiration port 5-26 BLUETOOTH 8-7 Bottle Height IA 5-11 Phaco 5-8 Vitrectomy 5-12 Bypass 3-11, 3-15 C Calibrate Foot Pedal Advanced Control Pedal 4-23 Single Linear 4-14 Touch Screen 6-11 CASE Mode 5-26 CASE ONE Touch 1-7, 5-27 CASE Vacuum 5-27 Chamber partially collapses 8-11 Changing Mode Parameters 3-16 Battery 4-16, 4-25, 8-6 Charging Checkout Cleaning System 3-17 Touch Screen 7-2 Cleaning/Care 7-2 Common Problems 8-2 Connecting Handpieces 1-9 RX Only NGP Z370500 Rev. B 1116 12-1 WHITESTAR SIGNATURE PRO System 12 Index Diathermy 1-7, 1-10 Default Settings 5-12 Forceps 3-6 Handpiece 3-6, 7-2 Output Power 10-9 Diathermy Handpiece Part Numbers 11-3 Dimensions 10-2 Dual Pump 1-5 Duty Cycles 5-15 E Edit Program 5-3 Surgeon 4-4 Effective Phaco Time 3-21 Electrical Specifications 10-3 ELLIPS Handpiece 1-4, 3-4, 3-5 End Case 3-21 Environmental Specifications 10-3 EPT 3-21 Export 6-19 F Failed to pair 8-8 Feedback Foot Pedal 4-7 Fluidics 1-3 Fluidics Mode Phaco 5-8 Connections Advanced Control Pedal 4-17 Front Panel 3-2 Rear Panel 3-3, 4-8 Console Dimensions 10-2 Continuous Burst 5-13 Phaco Power 5-15 Continuous Irrigation 1-5, 3-11 Cup Fill 3-10 Continuous Phaco Power 5-14 Copy a Program 5-29 Create Surgeon 5-2 Cup Fill 3-10 Custom Duty Cycles 5-16 Cut Mode Vitrectomy 5-12 Cut Rate Cutter Vitrectomy 5-12 Vitrectomy 3-7 D Database Delete 6-25 Import/Export 6-19 Restore 6-23, 6-25 Date Set 6-16 Default Settings Diathermy 5-12 Foot Pedal Advanced Control Pedal 4-16 Single Linear 4-7 Irrigation/Aspiration 5-11 Phaco 5-8 Vitrectomy 5-12 Delete Database 6-25 Program 5-2, 5-28 Delete a Backup Database 6-25 Diagnostics 8-1 RX Only NGP Z370500 Rev. B 1116 12-2 WHITESTAR SIGNATURE PRO System 12 Index Foot Pedal 1-4 Advanced Control Pedal 1-18 Calibrate 4-23 Connections 4-17 Default Settings 4-16 Setup 4-16 Switch Assignment 4-17 Testing 4-23 Threshold Configuration 4-22 Advanced Linear Pedal 2-5 Configuration 4-30 Connections 4-25 Setup 4-25 Test 4-32 Feedback 4-7 Modes Vitrectomy 5-6 Part Number 11-4 Pitch 2-7 Pitch Regions 4-7 Positions 2-7, 5-16 Single Linear 1-4, 2-5 Calibration 4-14 Default Settings 4-7 Setup 4-6 Switch Assignment 4-9 Testing 4-14 Threshold Configuration 4-12 Specifications 10-2 Forceps 9-2 Diathermy 3-6 Front Panel 3-2 Fuse Replacement 8-2 FUSION 5-26 FUSION Fluidics 5-20, 5-22, 5-26 FUSION Tubing Pack 2-3, 11-4 G Graphic User Interface 1-5 Graphs Phaco Power 10-10 GUI 1-5 Advanced Linear Pedal 2-7 H Handle Handpiece Cleaning 7-2 Connecting 1-9 IA 3-6 Phaco 3-5 Setup Diathermy 3-6 I/A 3-6 Phaco 3-4 Vitrectomy 3-7 Ultrasonic 1-9 Warranty 9-2 Help 8-14 High Power Limit 5-19 High Power Pulse Phaco Power 5-14 I IA WHITESTAR Technology 5-19 Handpiece 3-6 IAC 5-6 ICA 5-6 ICE Pulse Shaping Import 6-20 Import/Export Database 6-19 Inspection Instructions 2-2 Install Tubing Cassette 3-9 Irrigation Changing 1-8 Continuous 3-11 Flow does not stop 8-9 Inadequate 1-9 Irrigation/Aspiration 1-7 Balance 3-14 Default Settings 5-11 RX Only NGP Z370500 Rev. B 1116 12-3 WHITESTAR SIGNATURE PRO System 12 Index IV Pole Does not work 8-8 Programmable 1-10, 2-8 Setup 3-3 Testing 6-3 K Kick 5-19 L LAMINAR Flow 3-6 Language Selection 6-14 Locked Program 5-28 Long Pulse Phaco Power 5-14 Power 5-13 Low batteries 8-8 Low Power Limit 5-19 Low Power Pulse Phaco Power 5-14 Lower Threshold 5-27 M Maintenance 9-3 Max Aspiration IA 5-11 Vitrectomy 5-12 Max Power Diathermy 5-12 Max Vacuum IA 5-11 Vitrectomy 5-12 Maximum Height IV Pole 6-2 Maximum Vacuum 5-20 Mayo Tray Drape 2-3 Miscellaneous Part Numbers 11-4 Mode Programming 1-6 Modes Changing Parameters 3-16 Monitor Drape 2-3 Multiple Burst Phaco Power 5-15 Power 5-13 Multiple Mode Programming 1-6 N No aspiration 8-10 No diathermy or poor diathermy 8-13 No phacoemulsification 8-12 No sound when using diathermy 8-13 No vitrectomy cutting 8-13 O Occluded Aspiration Rate 5-21 Occlusion Aspiration Rate 5-24 Vacuum Threshold 5-24 Venting 5-26 Occlusion Mode Phaco Settings 5-21 One Touch CASE 5-27 Operating Modes 1-6 Output Power Diathermy 10-9 P Pairing Remote Control 6-10 Wired 6-7 Wireless 6-5 Wireless Remote Control 8-7 Panel Front 3-2 Rear 3-3 Parameter Settings Parameters Parts 11-1 Programming 1-5 WHITESTAR Technology 5-16 RX Only NGP Z370500 Rev. B 1116 12-4 WHITESTAR SIGNATURE PRO System 12 Index Phaco Handpiece 1-4, 1-10, 3-4, 3-5, 7-2 Pulse Phacoemulsification 1-2, 1-6, 1-9, 3-4, 8-12 Physical Specifications 10-2 Pitch 2-7 Pitch Regions Passive Reflux 5-28 Pencil Probe Diathermy 3-6 Percent Kick High End of Range 5-19 Low End of Range 5-19 Peristaltic Pump 10-4 Phaco Default Settings 5-8 Handpiece 3-4 Part Numbers 11-2 Phaco Power Continuous 5-14 Graph 10-10 Foot Pedal 4-7 Poor aspiration 8-10 Poor phacoemulsification 8-12 Positions Foot Pedal 2-7 Power Continuous Burst 5-13 Cord Length 10-2 Failure 1-9 Long Pulse 5-13 Multiple Burst 5-13 Short Pulse 5-13 Single Burst 5-13 Switch 8-2 Power Delivery Diathermy 5-12 pps 5-14 Precautions Safety 1-8 Prime Bypass 3-11 Prime/Tune 1-5, 3-10, 3-11 Priming Vitrectomy 3-15 Program Assign Order 5-29 Programmable IV Pole 1-6, 1-10, 2-8 Delete 5-2 Lock 5-28 Locked 5-28 Select 3-8 Program Name Edit 5-3 Setup 3-3 Specifications 10-2 Testing 6-3 Off Time 5-16 On time 5-16 Pulses per second 5-14 Rate 5-16 Pulse Shaping 5-18 Pump Ramp Threshold IA 5-11 Remote Control, Wireless Passive 5-28 Remote Control Pairing 6-10 Wireless 2-8 Setup 6-5 Reordering 11-1 Replacing Batteries 1-14 Fuse 8-2 Reset Restore Timers 3-14, 3-18 R Rear Panel 3-3 Reduced/insufficient irrigation flow 8-9 Reflux 5-28 Database 6-25 Restore All 6-24 Restore Database 6-23 Restriction of Hazardous Substances 1-22 RoHS 1-22 RX Only NGP Z370500 Rev. B 1116 12-5 WHITESTAR SIGNATURE PRO System 12 Index S Screen, Touch Calibrate 6-11 Selecting a Language 6-14 Self Test 3-8 Service Interval 6-18 set vacuum units 1-7 Settings Occlusion Mode 5-21, 5-25 Post Laser Cataract 5-10 Setup Advanced Control Pedal 4-16 Surgical Media Center (SMC) 6-15 System 3-2 Wireless Remote Control 6-5 Short Pulse Phaco Power 5-14 Power 5-13 Shutdown Sequence 3-20 System 3-20 Side vitrectomy 5-6 Single Burst Phaco Power 5-15 Power 5-13 Single Linear Foot Pedal Calibration 4-14 Default Settings 4-7 Setup 4-6 Switch Assignment 4-9 Testing 4-14 Threshold Configuration 4-12 Sleep Mode 8-7 SMC (Surgical Media Center) 2-9 Software Versions View 6-12 SOLO Handpiece 3-6 Sounds Set and test 4-33 Specifications Electrical 10-3 Environmental 10-3 Foot Pedal 10-2 Fuse 8-2 IA 10-4 IV Pole 10-2 Phacoemulsification 10-3 Physical 10-2 Vitrectomy 10-4 Startup 3-8 Status 8-14 Sterilization 3-20 Storage Conditions 10-3 Surgeon Add 4-3, 5-2 Assign Order 4-35 Copy 5-29 Surgical Media Center (SMC) 2-9 Setup 6-15 Switch Assignment Advanced Control Pedal 4-17 Advanced Linear Pedal 4-26 Single Linear Foot Pedal 4-9 Symbol Definitions 1-15 System Checkout 3-17 Components 2-2 Console 1-5 Description 1-2 Disposal 1-22 Does not turn on 8-7 Self Test 3-8 Shutdown 3-20 System Date and Time 6-16 System Self Test 6-13 T Technical Service 8-2 Test Advanced Control Pedal 4-23 Advanced Linear Pedal 4-32 Foot Pedal Single Linear 4-14 System 6-13 Wireless Remote Control 6-10 Test Chamber 2-3, 11-2 RX Only NGP Z370500 Rev. B 1116 12-6 WHITESTAR SIGNATURE PRO System 12 Index Threshold Vacuum 5-24 Threshold Configuration Advanced Control Pedal 4-22 Advanced Linear Pedal 4-30 Single Linear Foot Pedal 4-12 Time Set 6-16 Timers Reset 3-14 Touch Screen Calibrate 6-11 Cleaning 7-2 Does not respond 8-8 Using 3-16 Tubing Cassette 2-3 Install 3-9 Tune 3-11 Begin 3-13 U Ultrasonic (U/S) Time 3-21 Ultrasonic Handpiece 1-9 Units of Measure 6-17 Units of measure Unpair 8-7 Up Time Threshold 5-27 Upper Threshold 5-27 Using too much fluid 8-10 Touch Screen 3-16 Set units of measure for vacuum 6-17 Venturi pump 5-27 View Software Versions 6-12 Vitrectomy 1-7, 1-10, 3-7 Advanced Control Pedal Modes 4-17 Cutter 1-10 Default Settings 5-12 Foot Pedal Modes 4-7 Handpiece 3-7 Prime 3-15 W Wake-up 2-5 Warnings 1-8, 1-11 WHITESTAR ICE Technology 1-3 WHITESTAR Technology 1-2, 5-15 Wired Pairing 6-7 Wireless Pairing 6-5 Wireless Remote Control 1-4, 1-11, 2-8 Does not pair 8-7 Part Number 11-4 Wireless Remote Test 6-10 Wireless Setup Foot Pedal 6-5 Remote Control 6-5 Y Yaw 2-7 V Vacuum monitoring 5-20 pressure 5-26 Set units of measure 6-17 Vacuum units 1-7 Venting Occlusion 5-26 RX Only NGP Z370500 Rev. B 1116 12-7 WHITESTAR SIGNATURE PRO System 12 Index RX Only NGP Z370500 Rev. B 1116 12-8