|
app
s
|
Applicant Information
|
|
|
various
|
Effective |
2016-06-29
|
|
various
|
2013-10-30
|
|
various
|
2013-07-17
|
|
various
|
2013-07-08
|
|
various
|
Applicant's complete, legal business name |
Abbott Point of Care
|
|
various
|
FCC Registration Number (FRN) |
0012322509
|
|
various
|
Physical Address |
400 College Road East
|
|
various
|
Princeton, New Jersey 08540
|
|
various
|
United States
|
|
|
app
s
|
TCB Information
|
|
various
|
TCB Application Email Address |
t******@siemic.com
|
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
various
|
Grantee Code |
2AAEX
|
|
various
|
Equipment Product Code |
SDABGN
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
various
|
Name |
L****** N******
|
|
various
|
Title |
Lead Engineer - Systems
|
|
various
|
Telephone Number |
609-4********
|
|
various
|
Fax Number |
609-4********
|
|
various
|
E-mail |
l******@apoc.abbott.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| various | Yes |
| various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| various |
Is this application for software defined/cognitive radio authorization? | No |
| various | Equipment Class | DTS - Digital Transmission System |
| various | NII - Unlicensed National Information Infrastructure TX |
| various | DSS - Part 15 Spread Spectrum Transmitter |
| various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | SDIO Wireless Module |
| various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| various | Modular Equipment Type | Single Modular Approval |
| various | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| various | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 |
| various | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 05/16/2013 |
| various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| various | Grant Comments | C2PC to update to UNII new rule.
C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.287 W/kg at 0 cm.
Original Grant comment: Single modular approval for mobile platform. Output
power listed is Conducted. Separate evaluation must be required for any portable
configuration. When used in mobile applications, the antennas shown in this filing
must be installed to provide a separation distance of at least 20 cm from all
persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or
transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| various | C2PC to update to UNII new rule.
Original Grant Comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| various | C2PC to update to UNII new rule.
C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.765 W/kg at 0 cm.
Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| various | C2PC to update to UNII new rule.
Original Grant Comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| various | C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.287 W/kg at 0 cm.
Original Grant comment: Single modular approval for mobile platform. Output
power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the
responsibility of the Grantee. OEM integrators and end-users must be provided
with specific information required to satisfy RF exposure compliance for the final
host device. OEM integrators are instructed to ensure that the end user has no
manual instructions to remove or install the device. The antenna of this device
must not be co-located or used in conjunction with any other antenna or
transmitter. OEM integrators must be provided with antenna installation
instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| various | C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.765 W/kg at 0 cm.
Original Grant comment: Single Modular Approval for mobile platforms. Output
power listed is Conducted. 5150-5250MHz is restricted for indoor use only.
Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| various | C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled
Original Grant comment:
Single modular approval for mobile platform.
Output power listed is Conducted.
Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| various | C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with
Bluetooth disabled
Original Grant comment:
Single Modular Approval for mobile platforms.
Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| various | Single modular approval for mobile platform.
Output power listed is Conducted.
Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| various | Single modular approval for mobile platform.
Output power listed is Conducted.
5150-5250MHz is restricted for indoor use only.
Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| various | Is there an equipment authorization waiver associated with this application? | No |
| various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
various
|
Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
|
various
|
SIEMIC Labs
|
|
various
|
Name |
L****** B********
|
|
various
|
L******** B****
|
|
various
|
Telephone Number |
408-5********
|
|
various
|
40852********
|
|
various
|
Fax Number |
408 5********
|
|
various
|
E-mail |
l******@siemic.com
|
|