FCC ID: MQ4WU5502S 802.11 b/g/n 1T1R Wireless USB Adapter

by: Abocom Systems Inc latest update: 2011-10-27 model: WU5502S

One grant has been issued under this FCC ID on 10/27/2011 (this is one of ten releases in 2011 for this grantee). Public details available include internal & external photos, frequency information, and manuals. some products also feature user submitted or linked password defaults, warrantee terms, instructions, drivers, & troubleshooting guides.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Replacement

on Amazon

Trade-in? Recycling locations

eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 11
1 ~ 2011-10-27 11

app s				submitted / available
1	user manual	Users Manual	pdf	4.65 MiB
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		Cover Letter(s)	pdf
1		RF Exposure Info	pdf
1		External Photos	pdf
1		Internal Photos	pdf
1		ID Label/Location Info	pdf
1		Cover Letter(s)	pdf
1		Test Report	pdf
1		Test Setup Photos	pdf

exhibit
download
text

user manual

Users Manual

pdf

4.65 MiB

802.11 b/g/n 1T1R Wireless USB Adapter Users Manual Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Country Code Statement For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. To maintain compliance with FCC RF exposure requirements, use only belt-clips, holsters or similar accessories that do not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and operated with minimum distance 2.5cm between the radiator & your body. CE Statement:

Hereby, AboCom, declares that this device is in compliance with the essential requirement and other relevant provisions of the R&TTE Driective 1999/5/EC. Table of Contents CHAPTER 1: INTRODUCTION .......................................................... 1 FEATURES ................................................................................................ 1 PHYSICAL DETAILS ..................................................................................... 1 CHAPTER 2: INSTALLATION............................................................. 2 FOR WINDOWS 2000/XP ........................................................................... 2 Install Software ................................................................................................................. 2 Install Hardware ................................................................................................................ 4 Verification ......................................................................................................................... 4 FOR WINDOWS VISTA ................................................................................ 5 Install Software ................................................................................................................. 5 Install Hardware ................................................................................................................ 8 Verification ......................................................................................................................... 8 FOR WINDOWS 7 ...................................................................................... 9 Install Software ................................................................................................................. 9 Install Hardware .............................................................................................................. 11 Verification ....................................................................................................................... 11 CHAPTER 3: NETWORK CONNECTION ....................................... 12 HOW TO MAKE A CONNECTION .................................................................. 12 HOW TO ADD A PROFILE ........................................................................... 14 CHAPTER 4: UTILITY CONFIGURATION .................................... 15 FOR WINDOWS 2000/XP ......................................................................... 15 Station Mode ................................................................................................................... 15 Switch to AP Mode .......................................................................................................... 24 Soft AP mode ................................................................................................................... 25 FOR WINDOWS VISTA .............................................................................. 30 Station Mode ................................................................................................................... 30 Switch to AP Mode .......................................................................................................... 39 Soft AP mode ................................................................................................................... 40 FOR WINDOWS 7 .................................................................................... 45 Station Mode ................................................................................................................... 45 Switch to AP Mode .......................................................................................................... 54 Soft AP mode ................................................................................................................... 55 CHAPTER 5: UNINSTALL .................................................................. 60 FOR WINDOWS 2000/XP ......................................................................... 60 FOR WINDOWS VISTA .............................................................................. 62 FOR WINDOWS 7 .................................................................................... 64 Chapter 1:

Introduction WU5502S measures just around 15 mm long and 15mm wide that make it hold the distinction of being the smallest USB dongle in the world at present. WU5502S give mobile workers the freedom of staying connected to the network while roaming around a building or multiple buildings maintaining access to the Internet, e-mail, networked applications with the best convenience in narrow or crowded space for its ultra micro size.WU5502S is expected to be able to reach 150Mbps, which is relatively lower than normal, but still far more than sufficient to receive media streaming to the from access point. Features 1T1R Mode with 150Mbps PHY Rate Complies with IEEE 802.11n and IEEE 802.11 b/g standards Supports WEP 64/128, WPA, WPA2 Supports USB 2.0 interface

- 1 -

Chapter 2: Installation For Windows 2000/XP Install Software Note:

Do not insert the Wireless USB Adapter into the computer until the InstallShield Wizard finished installing. 1. Exit all Windows programs. Insert the included Installation CD into the computer. The CD-ROM will run automatically. Please click Next to process the installation.

- 2 -

2. When prompt to the following message, please click Install to begin the installation. 3. When the following screen appears, click Finish to restart the computer to complete the software installation.

- 3 -

Install Hardware Note:

Device Manager. Expand the Network adapters category. If the 802.11n/b/g 2cm Wireless LAN USB2.0 Adapter is listed here, it means that the device is properly installed and enabled.

- 4 -

For Windows Vista Install Software Note:

- 5 -

2. When prompt to the following message, please click Install to begin the installation.

- 6 -

3. When the following screen appears, click Finish to restart the computer to complete the software installation.

- 7 -

Install Hardware Note:

Insert the Wireless USB Adapter when finished software installation. Insert the Wireless USB Adapter into the USB Port of the computer. The system will automatically detect the new hardware. Verification To verify the device is active in the computer. Go to Start >Control Panel > Hardware and Sound > Device Manager. Expand the Network adapters category. If the 802.11n/b/g 2cm Wireless LAN USB2.0 Adapter is listed here, it means that the device is properly installed and enabled.

- 8 -

For Windows 7 Install Software Note:

- 9 -

2. When prompt to the following message, please click Install to begin the installation 3. When the following screen appears, click Finish to restart the computer to complete the software installation.

- 10 -

Install Hardware Note:

Insert the Wireless USB Adapter when finished software installation. Insert the Wireless USB Adapter into the USB Port of the computer. The system will automatically detect the new hardware. Verification To verify the device is active in the computer. Go to Start > Control Panel > Device Manager. Expand the Network adapters category. If the 802.11n/b/g 2cm Wireless LAN USB2.0 Adapter is listed here, it means that the device is properly installed and enabled.

- 11 -

Chapter 3:

Network Connection How to Make a Connection To make a connection with an access point, please follow below steps. Here takes Windows XP OS for example. Step 1: After set up the Wireless USB Adapter successfully, please launch the Configuration Utility. There are two ways to launch the utility by:

(1) Double clicking the Intelligent Wireless LAN Utility icon on the desktop.

(2) Or go to Start All Programs Intelligent Wireless Utility Intelligent Wireless LAN Utility.

- 12 -

Step 2: Please go to the Available Network tab, the system will automatically scan access points nearby, or click Refresh button to site survey again. Step 3: Then, double click preferred access point or click Add to Profile button to make a connection (if the access point has been set up security, please enter passwords and then click OK.)

- 13 -

How to Add a Profile After launched Wireless LAN Utility and selected preferred access point, please click Add to Profile button to enter Wireless Network Properties windows. If the access point has been set up security, please enter passwords, and then click OK to save profile settings. After finished above settings, please go to Profile tab to check the profile list (Available Profile(s)).

- 14 -

Chapter 4:

Utility Configuration For Windows 2000/XP Station Mode Show Tray Icon: Check to show the wireless adapter icon at the tray. Disable Adapter: Check this to disable the wireless adapter. Radio off: Check this to turn OFF radio function. Close: Click to leave the Intelligent 11n USB Wireless LAN Utility.

- 15 -

General The General page displays the detail information of current connection. General Tab Status Speed Type Encryption SSID Signal Strength Link Quality MAC Address IP Address Subnet Mask Gateway Renew IP Shows the current connected status. If there is no connection, it will show Not Associated. If been connected, the system will show Associated. When connecting, the system will show checking Status. Shows the current transmitting rate and receiving rate. Network type in use, Infrastructure or Ad-Hoc. Shows the encryption type currently in use. Valid value includes WEP, TKIP, AES, and Not Use. Shows the connected access point network name. Shows the receiving signal strength. Shows the connection quality based on signal strength. The physical address of the Wireless USB Adapter. Shows the IP address information. Shows the Subnet Mask information. Shows the default gateway IP address. Click the Renew IP button to obtain IP address form the connected gateway.

- 16 -

Profile Profile can let users book keeping the favorite wireless setting among home, office, and other public hot-spot. Users may save multiple profiles, and activate the correct one at preference. The Profile manager enables users to Add, Remove, Edit, Duplicate and Set Default profiles. Profile Tab Profile Name SSID Add Here shows a distinctive name of profile in this column. The SSID is the unique name shared among all wireless access points in the wireless network. Click Add button to add a profile from the drop-down screen.

- 17 -

Profile Name: Users can enter profile name at will. Network Name (SSID): The SSID is the unique network name

(case-sensitive) shared among all wireless access points in the wireless network. The name must be identical for all devices and wireless access points attempting to connect to the same network. This is a computer-to-computer (ad hoc) network; wireless access points are not used: This function is selected to enable the ad hoc network type that computers should be setup at the same channel to communicate to each other directly without access point, users can share files and printers between each PC and laptop. User can select channels form the pull-down menu. Wireless network security Network Authentication: There are several types of authentication modes including Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA 802.1X, WPA2 802.1X and WEP 802.1X. Data encryption: For Open System, Shared Key and WEP 802.1X authentication mode, the selection of encryption type is WEP. For WPA-PSK, WPA2-PSK, WPA 802.1X and WPA2 802.1X authentication mode, the encryption type supports both TKIP and AES. When encryption is set to WEP ASCII: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 5 ASCII characters (case sensitive), and 128 bits for 13 ASCII characters (case sensitive). PASS PHRASE: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 10 Hexadecimal characters (0~9, a~f) and 128 bits for 26 Hexadecimal characters (0~9, a~f). Key index (advanced): Select 1~4 key index form the pull-down menu, must match with the connected APs key index. When encryption is set to WPA-PSK/ WPA2-PSK Network key: Enter network key at least 8 to 64 characters.

- 18 -

Confirm network key: Enter network key again to confirm. When encryption is set to WPA 802.1X/ WPA2 802.1X/ WEP 802.1X When users use radius server to authenticate client certificate for WPA authentication mode (WPA authentication do not support EAP Method-

MD5-Challenge). EAP TYPE:

TLS: Transport Layer Security. Provides for certificate-based and mutual authentication of the client and the network. It relies on client-side and server-side certificates to perform authentication and can be used to dynamically generate user-based and session-based WEP keys to secure subsequent communications between the WLAN client and the access point. LEAP: Light Extensible Authentication Protocol. It is an EAP authentication type used primarily in Cisco Aironet WLANs. It encrypts data transmissions using dynamically generated WEP keys, and supports mutual authentication. TTLS: Tunnelled Transport Layer Security. This security method provides for certificate-based, mutual authentication of the client and network through an encrypted channel. Unlike EAP-TLS, EAP-TTLS requires only server-side certificates. PEAP: Protect Extensible Authentication Protocol. PEAP transport securely authentication data by using tunnelling between PEAP clients and an authentication server. PEAP can authenticate wireless LAN clients using only server-side certificates, thus simplifying the implementation and administration of a secure wireless LAN. MD5: Message Digest Challenge. Challenge is an EAP authentication type that provides base-level EAP support. It provides for only one-way authentication - there is no mutual authentication of wireless client and the network. Tunnel: This is enabled under TTLS and PEAP type. For TTLS, the selections of tunnel are CHAP, MSCHAP, MSCHAP-V2, PAP. For PEAP, the selections of tunnel are MD5, GTC, TLS and MSCHAP-V2. Username: Enter the username for server. Identity: Enter the identity for server. Domain: Enter the domain of the network. Password: Enter the password for server. Certificate: Choose server that issuer of certificates. Click Remove button to delete selected profile. Click Edit button to edit selected profile. Click Duplicate button to copy selected profile. Click Set Default button to set selected profile to be connected first. Remove Edit Duplicate Set Default

- 19 -

Available Network This page displays the information of surrounding APs from last scan result. The tab lists the information including SSID, Channel, Encryption, Network Authentication, Signal, Type, BSSID, Supported Rate (s), and Mode. Network Tab SSID Channel Encryption Network Authentication Signal Type BSSID Shows the network name of the access points. Shows the currently channel in use. Shows the encryption type currently in use. Valid value includes WEP, TKIP, AES, None and TKIP/AES. Show the device network authentication. Shows transmit power, the amount of power used by a radio transceiver to send the signal out. Network type in use, Infrastructure or Ad-Hoc mode. Shows Wireless MAC address. Supported Rate(s) Shows the transmitting data rate.

- 20 -

Mode Refresh Supported wireless mode. It may support 802.11b, 802.11g and 802.11n wireless mode. Click Refresh button to search and rescan the available network. Add to Profile Select an available network (SSID) on the list and then click Add to Profile button to add it into the profile list. Note Double click on item to join/create profile. Status This tab listed the information about the wireless USB adapter and connected access point.

- 21 -

Statistics The Statistics screen displays the statistics on the current network settings. Statistics Tx OK Tx Error Shows information of packets successfully sent. Shows information of packets failed transmit after hitting retry limit. Rx OK Shows information of packets received successfully. Rx Packet Count Shows information of packets received successfully. Rx Retry Shows information of packets failed transmit after hitting retry limit. Rx ICV Error Shows information of packets received with ICV error. Reset Click to reset counters to zero.

- 22 -

WPS The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security setup and management of Wi-Fi networks. The STA as an Enrollee or external Registrar supports the configuration setup using PIN (Personal Identification Number) configuration method or PBC (Push Button Configuration) method through an internal or external Registrar. WPS Tab PIN Code 8-digit numbers. It is required to enter PIN Code into Registrar when using PIN method. When STA is Enrollee, users can use "Renew" button to re-generate new PIN Code. Pin Input Config

(PIN) Click the Pin Input Config (PIN) button to select specific AP to process PIN Config. Push Button Config

(PBC) Click this button to connect with AP that supported WPS function within two minutes. Meanwhile, the AP should also click the PBC button simultaneously.

- 23 -

About This page displays the information of the Wireless USB Adapter Version. Switch to AP Mode To access the soft AP mode, please select the Mode on the function list of the Utility to make the Wireless USB Adapter act as a wireless AP.

- 24 -

Soft AP mode General General SSID BSSID Shows the network name of the AP. Shows the MAC address of the AP. Association Table This table shows the connected client here. Config Click the Config button to set up the Wireless Network Properties.

- 25 -

Network Name (SSID): User can change the network name of this access point. Channel: User can select the channel form the pull-down list. Wireless network security Network Authentication: There are several types of authentication modes including Open System, Shared Key, WPA-PSK and WPA2-PSK. Data encryption: For Open System and Shared Key authentication mode, the selection of encryption type is WEP. For WPA-PSK, WPA2-PSK, authentication mode, the encryption type supports both TKIP and AES. When encryption is set to WEP ASCII: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 5 ASCII characters (case sensitive), and 128 bits for 13 ASCII characters (case sensitive). PASS PHRASE: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 10 Hexadecimal characters

(0~9, a~f) and 128 bits for 26 Hexadecimal characters (0~9, a~f). Key index (advanced): Select 1~4 key index form the pull-down menu, must match with the connected APs key index. When encryption is set to WPA-PSK/ WPA2-PSK Network key: Enter network key at least 8 to 64 characters. Confirm network key: Enter network key again to confirm.

- 26 -

Advanced Advanced Beacon Interval DTIM Period Preamble The time between two beacons. (The system default is 100 ms.) The delivery traffic indication message (DTIM) is an element included in some beacon frames. User can specify a value from 1 to 255 beacons. Select from the pull-down menu to change the Preamble type into Short or Long. Set Defaults Click to use the system default value. Apply Click to apply the above settings.

- 27 -

Statistics Statistics Tx OK Tx Error Shows information of packets successfully sent. Shows information of packets failed transmit after hitting retry limit. Rx OK Shows information of packets received successfully. Rx Packet Count Shows information of packets received successfully. Rx Retry Shows information of packets failed transmit after hitting retry limit. Rx ICV Error Shows information of packets received with ICV error. Reset Click to reset counters to zero.

- 28 -

ICS This page displays setting Internet connection sharing (ICS). Select a sharing public network and click Apply button to make a connection.

- 29 -

For Windows Vista Station Mode Show Tray Icon: Check to show the wireless adapter icon at the tray. Disable Adapter: Check this to disable the wireless adapter. Radio off: Check this to turn OFF radio function. Close: Click to leave the Intelligent 11n USB Wireless LAN Utility.

- 30 -

General The General page displays the detail information of current connection. General Tab Status Speed Type Encryption SSID Signal Strength Link Quality MAC Address IP Address Subnet Mask Gateway Shows the current connected status. If there is no connection, it will show Not Associated. If been connected, the system will show Associated. When connecting, the system will show checking Status. Shows the current transmitting rate and receiving rate. Network type in use, Infrastructure or Ad-Hoc. Shows the encryption type currently in use. Valid value includes WEP, TKIP, AES, and Not Use. Shows the connected access point network name. Shows the receiving signal strength. Shows the connection quality based on signal strength. The physical address of the Wireless USB Adapter. Shows the IP address information. Shows the Subnet Mask information. Shows the default gateway IP address.

- 31 -

Renew IP Profile Click the Renew IP button to obtain IP address form the connected gateway. Profile can let users book keeping the favorite wireless setting among home, office, and other public hot-spot. Users may save multiple profiles, and activate the correct one at preference. The Profile manager enables users to Add, Remove, Edit, Duplicate and Set Default profiles. Profile Tab Profile Name SSID Add Here shows a distinctive name of profile in this column. The SSID is the unique name shared among all wireless access points in the wireless network. Click Add button to add a profile from the drop-down screen.

- 32 -

This is a computer-to-computer (ad hoc) network; wireless access points are not used: This function is selected to enable the ad hoc network type that computers should be setup at the same channel to communicate to each other directly without access point, users can share files and printers between each PC and laptop. Profile Name: Users can enter profile name at will. Network Name (SSID): The SSID is the unique network name

(case-sensitive) shared among all wireless access points in the wireless network. The name must be identical for all devices and wireless access points attempting to connect to the same network. Channel: If set to ad hoc network type, user can select channels form the pull-down menu. Wireless network security Network Authentication: There are several types of authentication modes including Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA 802.1X, WPA2 802.1X and WEP 802.1X. Data encryption: For Open System, Shared Key and WEP 802.1X authentication mode, the selection of encryption type is WEP. For WPA-PSK, WPA2-PSK, WPA 802.1X and WPA2 802.1X authentication mode, the encryption type supports both TKIP and AES. When encryption is set to WEP ASCII: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 5 ASCII characters (case sensitive), and 128 bits for 13 ASCII characters (case sensitive). PASS PHRASE: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 10 Hexadecimal characters (0~9, a~f) and 128 bits for 26 Hexadecimal characters (0~9, a~f). Key index (advanced): Select 1~4 key index form the pull-down menu, must match with the connected APs key index.

- 33 -

When encryption is set to WPA-PSK/ WPA2-PSK Network key: Enter network key at least 8 to 64 characters. Confirm network key: Enter network key again to confirm. When encryption is set to WPA 802.1X/ WPA2 802.1X/ WEP 802.1X When users use radius server to authenticate client certificate for WPA authentication mode (WPA authentication do not support EAP Method-

MD5-Challenge). EAP TYPE:

- 34 -

Available Network This page displays the information of surrounding APs from last scan result. The tab lists the information including SSID, Channel, Encryption, Network Authentication, Signal, Type, BSSID, Supported Rate(s), and Mode. Network Tab SSID Shows the network name of the access points. Channel Shows the currently channel in use. Encryption Network Authentication Signal Type Shows the encryption type currently in use. Valid value includes WEP, TKIP, AES, None and TKIP/AES. Show the device network authentication. Shows transmit power, the amount of power used by a radio transceiver to send the signal out. Network type in use, Infrastructure or Ad-Hoc mode.

- 35 -

BSSID Shows Wireless MAC address. Supported Rate(s) Shows the transmitting data rate. Mode Refresh Supported wireless mode. It may support 802.11b, 802.11g and 802.11n wireless mode. Click Refresh button to search and rescan the available network. Add to Profile Select an available network (SSID) on the list and then click Add to Profile button to add it into the profile list. Note Double click on item to join/create profile. Status This tab listed the information about the wireless USB adapter and connected access point.

- 36 -

- 37 -

(PIN) Click the Pin Input Config (PIN) button to select specific AP to process PIN Config. Push Button Config

(PBC) Click this button to connect with AP that supported WPS function within two minutes. Meanwhile, the AP should also click the PBC button simultaneously.

- 38 -

- 39 -

- 40 -

- 41 -

- 42 -

- 43 -

ICS This page displays setting Internet connection sharing (ICS). Select a sharing public network and click Apply button to make a connection.

- 44 -

For Windows 7 Station Mode Show Tray Icon: Check to show the wireless adapter icon at the tray. Disable Adapter: Check this to disable the wireless adapter. Radio off: Check this to turn OFF radio function. Close: Click to leave the Intelligent 11n USB Wireless LAN Utility.

- 45 -

General The General page displays the detail information of current connection. General Tab Status Speed Type Encryption SSID Signal Strength Link Quality MAC Address IP Address Subnet Mask Gateway Shows the current connected status. If there is no connection, it will show Not Associated. If been connected, the system will show Associated. When connecting, the system will show checking Status. Shows the current transmitting rate and receiving rate. Network type in use, Infrastructure or Ad-Hoc. Shows the encryption type currently in use. Valid value includes WEP, TKIP, AES, and Not Use. Shows the connected access point network name. Shows the receiving signal strength. Shows the connection quality based on signal strength. The physical address of the Wireless USB Adapter. Shows the IP address information. Shows the Subnet Mask information. Shows the default gateway IP address.

- 46 -

- 47 -

(case-sensitive) shared among all wireless access points in the wireless network. The name must be identical for all devices and wireless access points attempting to connect to the same network. Channel: If set to ad hoc network type, user can select channels form the pull-down menu. Wireless network security Network Authentication: There are several types of authentication modes including Open System, Shared Key, WPA-PSK, WPA2-PSK, WPA 802.1X, WPA2 802.1X and WEP 802.1X. Data encryption: For Open System, Shared Key and WEP 802.1X authentication mode, the selection of encryption type is WEP. For WPA-PSK, WPA2-PSK, WPA 802.1X and WPA2 802.1X authentication mode, the encryption type supports both TKIP and AES. When encryption is set to WEP ASCII: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 5 ASCII characters (case sensitive), and 128 bits for 13 ASCII characters (case sensitive). PASS PHRASE: Only valid when using WEP encryption algorithm. When key length is set to 64 bits user can enter 10 Hexadecimal characters (0~9, a~f) and 128 bits for 26 Hexadecimal characters (0~9, a~f). Key index (advanced): Select 1~4 key index form the pull-down menu,

- 48 -

must match with the connected APs key index. When encryption is set to WPA-PSK/ WPA2-PSK Network key: Enter network key at least 8 to 64 characters. Confirm network key: Enter network key again to confirm. When encryption is set to WPA 802.1X/ WPA2 802.1X/ WEP 802.1X When users use radius server to authenticate client certificate for WPA authentication mode (WPA authentication do not support EAP Method-

MD5-Challenge). EAP TYPE:

- 49 -

Available Network This page displays the information of surrounding APs from last scan result. The tab lists the information including SSID, Channel, Encryption, Network Authentication, Signal, Type, BSSID, Supported Rate(s), and Mode. Network Tab SSID Shows the network name of the access points. Channel Shows the currently channel in use. Encryption Network Authentication Signal Shows the encryption type currently in use. Valid value includes WEP, TKIP, AES, None and TKIP/AES. Show the device network authentication. Shows transmit power, the amount of power used by a radio transceiver to send the signal out.

- 50 -

Type BSSID Network type in use, Infrastructure or Ad-Hoc mode. Shows Wireless MAC address. Supported Rate(s) Shows the transmitting data rate. Mode Refresh Supported wireless mode. It may support 802.11b, 802.11g and 802.11n wireless mode. Click Refresh button to search and rescan the available network. Add to Profile Select an available network (SSID) on the list and then click Add to Profile button to add it into the profile list. Note Double click on item to join/create profile. Status This tab listed the information about the wireless USB adapter and connected access point.

- 51 -

- 52 -

(PIN) Click the Pin Input Config (PIN) button to select specific AP to process PIN Config. Push Button Config

(PBC) Click this button to connect with AP that supported WPS function within two minutes. Meanwhile, the AP should also click the PBC button simultaneously.

- 53 -

- 54 -

- 55 -

- 56 -

- 57 -

- 58 -

ICS This page displays setting Internet connection sharing (ICS). Select a sharing public network and click Apply button to make a connection.

- 59 -

Chapter 5: Uninstall For Windows 2000/XP To remove the utility and driver, please refer to below steps. (When removing the utility, the driver will be removed as well.) 1. Go to Start All Programs Intelligent Wireless Utility Uninstall Intelligent.

- 60 -

2. 3. Click Yes to completely remove the selected application and all of its features. Then click Finish to complete uninstall.

- 61 -

For Windows Vista To remove the utility and driver, please refer to below steps. (When removing the utility, the driver will be removed as well.) 1. Go to Start Programs Intelligent Wireless LAN Utility Uninstall Intelligent. 2. Click Yes to complete remove the selected application and all of its features.

- 62 -

3. Finally, click Finish to complete uninstall.

- 63 -

For Windows 7 To remove the utility and driver, please refer to below steps. (When removing the utility, the driver will be removed as well.) 1. Go to Start Programs Intelligent Wireless Utility Uninstall Intelligent.

- 64 -

2. Click Yes to complete remove the selected application and all of its features. 3. Finally, click Finish to complete uninstall.

- 65 -

		frequency	equipment class	purpose
1	2011-10-27	2422 ~ 2452	DTS - Digital Transmission System	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2011-10-27
1	Applicant's complete, legal business name	Abocom Systems Inc
1	FCC Registration Number (FRN)	0009543745
1	Physical Address	No.77, Yu-Yih Rd.
1		Miao-Lih, N/A 35059
1		Taiwan

app s	TCB Information
1	TCB Application Email Address	d******@phoenix-testlab.de
1	TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques

app s	FCC ID
1	Grantee Code	MQ4
1	Equipment Product Code	WU5502S

app s	Person at the applicant's address to receive grant or for contact
1	Name	H****** H****
1	Title	Manager
1	Telephone Number	886-3******** Extension:
1	Fax Number	886-3********
1	E-mail	h******@abocom.com.tw

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	DTS - Digital Transmission System
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	802.11 b/g/n 1T1R Wireless USB Adapter
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	No
1	Modular Equipment Type	Does not apply
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Output Power listed is conducted. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter than specified in the filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 1T1R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz. SAR compliance has been established for direct laptop and USB cable plug-in configurations with a separation distance of 0.5 cm between the particular dongle orientation and flat phantom. The highest reported SAR value is: 0.42 W/kg.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	Sporton International Inc.
1	Name	A****** C****
1	Telephone Number	886-3******** Extension:
1	Fax Number	886-3********
1	E-mail	a******@sporton.com.tw

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	15C	MO	2412	2462	0.301
1	2	15C	MO	2422	2452	0.252

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2A2NS-L10 Guanyu(Dongguan) Intelligent Technology Co.,Ltd 2ASRT-NPX750 Screeneo Innovation SA 2AWD4-STCROSS22 Echelon Fitness Multimedia LLC 2BL6K-JD01 Shenzhen Monkey Creative Technology Co., Ltd. 2AC8UA2427 Anhui Huami Information Technology Co.,Ltd.