FCC ID: 2AWRO-8768 Wireless Tablet

Product Information User Manual Safety and Compliance Information Using Your Device Around Other Electronic Devices The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals. There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off. FCC Compliance Information Radio Frequency Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules. Information on your device is on file with the FCC and can be found by inputting your devices FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid. IC Compliance Information Radio Frequency Information This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology. Product Specifications Model Number: P4N6AC Electrical Rating: 5V 3A Connectivity: Bluetooth Low Energy, Wifi 2.4 GHz and 5 GHz Temperature Rating: 0C to 35C Operating temperature: 0C to 35C How to use

Date: January 5, 2022 To the Certification Body, Abyssal Plain LLC hereby authorizes Sporton International Inc., located at No.52, Huaya 1st Rd., Guishan Dist. Taoyuan City, Taiwan, R.O.C., to provide and prepare all documentation relating to our product certification, including the signing of application forms for Model Name P4N6AC

(Product), FCC ID: 2AWRO-8768 , directly to the Certification Body on our behalf. Sporton International Inc. is also authorized under this letter to respond on our behalf directly to the Certification Bodys questions about the Product and Reports as necessary to assist the Certification Body in the FCC certification. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is valid until further written notice from the Abyssal Plain LLC Sincerely, Abyssal Plain LLC By: _______________ Name: Brian Harrison Address: CASTLE HILLS 1100 NW LOOP 410, SUITE 700, San Antonio, Texas 78213, United States Telephone: 302-691-6425 E-mail: abyssalplainllc@gmail.com

Abyssal Plain LLC CASTLE HILLS 1100 NW LOOP 410, SUITE 700, San Antonio, Texas 78213, United States Tel: 302-691-6425 January 4th 2022 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 RE: Confidential Treatment for FCC ID 2AWRO-8768 To whom it may concern:

On behalf of Abyssal Plain LLC and its affiliates, I write to request the confidential treatment of the item described below, each of which are attached as exhibits to the equipment authorization application for FCC ID: 2AWRO-8768. This request is made pursuant to 47 C.F.R. 0.457 and 47 C.F.R. 0.459. Short-Term Confidentiality We request 180 days of confidential treatment (from the date of grant of the equipment authorization for FCC ID: 2AWRO-8768, for the following confidential materials contained in our application:

Test setup photos Internal photos External photos User Manual These materials contain proprietary information about our device that is not publicly available, and we only share this information with third parties who are committed to maintaining the confidentiality of such information. Disclosure of this information prior to our marketing of our device would be detrimental to our business and impair our ability to successfully launch the device. We request indefinite confidential treatment for the following confidential materials contained in our application:

Long-Term Confidentiality Antenna Specifications These materials contain sensitive technical and design information about our device that we would only share on a need-to-know basis, subject to confidentiality agreements, even after we begin marketing and selling the device. If this information is disclosed, our competitors would gain an unfair commercial advantage over us by learning about our product design and development processes. This in turn would significantly harm our ability to compete in a highly competitive market space. Please let me know if you have any questions or concerns. Thank you in advance for your time and support of our request. Schematics Block diagram Part List Operation Description Tune-up Procedure Yours Truly, _________________________ Brian Harrison abyssalplainllc@gmail.com