KeyFolio Expert Bluetooth keyboard for iPad 3 QUICK START GUIDE GUIDE DE DEMARRAGE RAPIDE KURZANLEITUNG SNELSTARTGIDS GUIDA RAPIDA GUA RPIDA GYORSKALAUZ PRUKA ZANME SZYBKI START MANUAL DE INCIO RPIDO QUICK START GUIDE Register Now!
Enregistrer maintenant !
Jetzt registrieren!
Nu registreren Registrar ahora Registra adesso Regisztrljon most!
Zaregistrujte se nyn!
Zarejestruj si!
Registe-se agora!
register.kensington.com B QUICK START GUIDE C H English Contents A Components D E F G A KeyFolio Expert B Charging Cable C Quick Start Guide D Caps Lock E Power/Charging Indicator Light F Bluetooth Status Indicator Light G On/Off Switch/Bluetooth Connection Button H MicroUSB Charging Connector 2 Insert Your iPad and Connect the Keyboard Insert your iPad all the way into the secured frame. 1 2 Find the best fit for your Keyboard and iPad 3 3 Press the On/Off Switch for 3 to 8 seconds. The Power Indicator Light glows. NOTE: When you first turn on the Keyboard, both the Power Indicator Light and the Bluetooth Status Indicator Light glow for 5 seconds. You cannot connect the Keyboard to your iPad until only the Power Indicator Light glows. 4 On your iPad, tap Settings. 5 Open Bluetooth and make sure Bluetooth is on. 6 On the Keyboard, press the Bluetooth Connection Button. The Bluetooth Status Indicator Light starts blinking for 10 minutes or until connected to a device. 7 The Keyboard now appears on your iPad screen. Tap Bluetooth Wireless Keyboard. 8 Your iPad screen displays a passkey. Enter the passkey on the Keyboard, and press Enter. 9 Your iPad screen shows the Keyboard as Connected. On the Keyboard, the Bluetooth Status Indicator Light turns off. 10 You can now use your Keyboard to type in any app. NOTE: To insure the K Lock key works correctly please ensure you do the following:
Home page > Settings > General > Passcode key. Verify Require Passcode is set to Immediately otherwise a keyboard unlock will not require a passcode. Go back to previous menu and verify Passcode Lock is On. Note the following about the Bluetooth connection between the keyboard and your iPad:
On/Off Switch press for 8 seconds or longer then release (regardless of on or off state).
On/Off Switch for 3 to 8 seconds then release = toggle keyboard power (on
to off, off to on).
automatically.
CTRL + ALT + FN + F for 3 seconds or more = reset to factory default mode (clear all previously paired BT devices in memory), ALL LEDs should flash on and off 3 times and keyboard should turn to off mode.
last paired iPad if present. If iPad is not found after waking from sleep mode within 30 seconds, the device should go back to sleep. 4 LED Behavior and Explanation LED Behavior Explanation
off.
Power and Bluetooth LEDs will turn on and stay lit for 5 seconds.
Bluetooth LED will turn off, followed by the Power LED 0.5 second later.
Bluetooth Connection Button is pressed, the Power LED will stay solidly lit, while the Bluetooth LED will begin to blink for 10 minutes or until connected to an iPad.
Power LED will remain lit and all others will go off.
Power LED will turn on immediately.
toggle is shown by the Caps Lock LED.
Charge LED will turn flash red and turn off only when charge is completed. Charge the Battery Charge your KeyFolio Expert before initial use or when the Charging Indicator 1 glows red. Insert the small end of the Charging Cable into the micro USB Charging Connector on the Keyboard. 2 Insert the other end of the Charging Cable into your iPad charger. 3 Plug your iPad charger into a working outlet. The Charging Indicator Light glows red. 4 When the Keyboard is fully charged, the Charging Indicator Light turns off. 5 Troubleshooting I cant connect the Keyboard to my iPad. Try the following in sequence. You can stop when the problem is fixed. 1 Make sure you have installed and set up Bluetooth correctly on your iPad. Check the documentation that came with your iPad for instructions. 2 Make sure that the Keyboard is within range of your iPad. Maximum Bluetooth range 3 4 is about 10 meters/33 feet. If your iPad is connected to other Bluetooth devices, you may need to disconnect some devices before you can connect to the Keyboard. If you changed any Bluetooth settings on your iPad, try connecting the Keyboard to your iPad again. 5 Make sure that both your iPad battery and the Keyboard battery are sufficiently charged. If this does not solve the problem, please contact Kensington Support at kensington.com. Technical Support Technical support is available to all registered users of Kensington products. Technical Support contact information can be found on the back page of this manual. Web Support You may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Website: www.support.kensington.com. Telephone Support There is no charge for technical support except long-distance charges where applicable. Please visit www.kensington.com for telephone support hours. In Europe, technical support is available by telephone Monday to Friday 09:00 to 21:00 (Central European time). Please note the following when calling support:
WARNING! IMPORTANT SAFETY INSTRUCTIONS Failure to read and follow these safety instructions could result in fire, explosion, electrical shock or other hazard, causing serious and/or fatal injury and/or property damage.
flame.
its ports.
electrical shock. If exposed to moisture during use, unplug the KeyFolio immediately. If your
6
KeyFolio gets wet, have a qualified technician evaluate the products safety before resuming use.
overheating, keep area around KeyFolio ventilated and do not place anything on or around KeyFolio during operation. Do not operate your KeyFolio near a heat source, heat vent, or in direct
discontinue use of the KeyFolio, and have the product examined by a qualified electronic technician.
replaced before use.
KeyFolios contents to contact your skin or eyes. In the event of accidental contact wash the affected area with large amounts of water and seek medical attention immediately.
product read and follow these warnings and instructions.
Enhancing Performance by Proper Care and Storage of your KeyFolio
at least 30 % charge remaining. To check the charge level of your KeyFolio press the battery indicator button.
Charge your KeyFolio between uses even if it is not fully discharged. The lithium-polymer battery used in this product has no memory effect. Therefore, several partial discharges with frequent recharges are better than one full discharge, and will help prolong the life of your KeyFolio. Short battery life in laptops is mainly caused by heat, rather than charge/discharge patterns.
Do not store your KeyFolio at elevated temperatures (such as in your car) or in high humidity. Disposing of your KeyFolio
Consult your local municipal or civil authority for instructions on correctly disposing of a lithium-polymer battery.
Battery Recovery Corporation (RBRC). When you are ready to dispose of the KeyFolio, please contact the RBRC at 1-800-8-BATTERY or www.rbrc.org. indicates your KeyFolio can be recycled by the Rechargeable
7 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to omply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without RF striction. This device complies with Industry Canada licence-exempt RSS standard(s). 1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage
, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
CE DECLARATION OF CONFORMITY Kensington declares that this product is in compliance with the essential requirements and other relevant provisions of applicable EC directives. For Europe, a copy of the Declaration of Conformity for this product may be obtained by clicking on the Compliance Documentation link at www.support.kensington.com. INFORMATION FOR EU MEMBER-STATES ONLY The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city ofce, your household waste disposal service, or the shop where you purchased the product. Kensington and the ACCO name and design are registered trademarks of ACCO Brands. The Kensington Promise is a service mark of ACCO Brands. KeyFolio is a registered trade mark of ACCO Brands. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc. Made for iPod means that an electronic accessory has been designed to connect specically to iPod and has been certied by the developer to meet Apple performance standards. Works with iPhone means that an electronic accessory has been designed to connect specically to iPhone and has been certied by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. All other registered and unregistered trademarks are the property of their respective owners. 2012 Kensington Computer Products Group, a division of ACCO Brands USA LLC. Any unauthorized copying, duplicating, or other reproduction of the contents hereof is prohibited without written consent from Kensington Computer Products Group. All rights reserved. 01/12 8 Technical Support / Assistance technique / Technischer Support / Technische ondersteuning / Supporto tecnico / Asistencia tcnica / Mszaki tmogats / Technick podpora / Pomoc techniczna / / Assistncia tcnica Belgi / Belgique Canada Denmark Deutschland Espaa Finland France Hungary Ireland Italia Mxico 02 275 0684 1 800 268 3447 35 25 87 62 0211 6579 1159 91 662 38 33 09 2290 6004 01 70 20 00 41 20 9430 612 01 601 1163 02 4827 1154 55 15 00 57 00 Nederland Norway sterreich Portugal Russia Schweiz / Suisse Sweden United Kingdom United States International Toll 053 482 9868 22 70 82 01 01 790 855 701 800 831 438 007 495 933 5163 01 730 3830 08 5792 9009 0207 949 011 1 800 535 4242
+31 53 484 9135 For technical support visit:
Pour tout support technique veullez visiter:
www.kensington.com Complete warranty terms are available at:
www.warranty.kensington.com Kensington Computer Products Group A Division of ACCO Brands 333 Twin Dolphin Drive, Sixth oor Redwood Shores, CA 94065 ACCO Australia Level 2, 8 Lord St Botany NSW 2019 Australia Designed in California, U.S.A. by Kensington Made in China Patents Pending ACCO Brands Europe Oxford Road Aylesbury Bucks, HP21 8SZ United Kingdom www.kensington.com 901-2850-00 KL