User Manual VER: 0.1 USER MANUAL Model NAME : 2.4G Wireless Mouse &Dongle MODEL NO.
: M01440-M VERSION
: 0.1 DATE
: 2019.5.6 Page 1 of 8 Version.
#
0.1 Revised Date PIC Remark 6/5/2019 Bob Preliminary User Manual VER: 0.1 Page 2 of 8 User Manual VER: 0.1 Electrical Specification 1. Operating Voltage Mouse supply voltage: 1.5V (1AA battery) Dongle supply voltage: 5V (USB Port) 2. Current Consumption Current use :< 10mA Dongle< 35mA 3. Sleep Mode 3.1 Electrical Current: 1mA;
3.2 Wake Up: Press any button 4. Mouse Pointer Performance 4.1 Resolution800/1200 (default) /1600 DPI 4.2 Speed 25inches/sec Max 4.3 Acceleration8G 5. LED Indicating Functions When the battery power is low (battery voltage reduce to <1.0V) the LED will glisten at the frequency of 1Hz Page 3 of 8 User Manual VER: 0.1 6. Wireless specifications Mouse&Dongle: 2.402-2.480GHz frequency coverage. GFSK RF transceiver High Speed RF link data rate Max. 1M bit/s Button Functions 1. Left Button: Mouse left button standard function 2. Right Button: Mouse right button standard function 3. Middle Button: Mouse middle button standard function 4. Wheel: Mouse scroll wheel standard function 5. 6. 4 Button: IE Forward function 5 Button: IE Back function 7. DPI Button: DPI regulate function Page 4 of 8 Operation Process User Manual VER: 0.1 Step 1 Open the battery cover which in the back of the Mouse. Insert 2AAA battery which is environment-friendly and safety Close the battery cover. Step 2 Place the mouse on a desk or other plane surface. The surface material isnt metal is better for wireless distance. Step 3 Insert Dongle in a USB port of PC. The Transceiver is pairing with the mouse. Step 4 Use the mouse freely. Page 5 of 8 User Manual VER: 0.1 Caution Please use the Mouse in human house only and keep away water. Dont to fixate the light at the mouse bottom. Children use the mouse with guardian together is necessary. Keep dry. Humidity, liquids, contain minerals that will corrode electronic circuits. Dont use or store in dusty, dirty areas. Dont store in hot areas. High temperature can shorten the life of electronic devices and warp or melt certain plastics. Dont store in very cold areas. Moisture can form inside the case, which may damage electronic circuit boards. Dont attempt to open the case. Non-expert handling of the device may damage the system. Avoid dropping and strong impact. Page 6 of 8 User Manual VER: 0.1 FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Page 7 of 8 User Manual VER: 0.1 FCC-FRKLARING:
Denna enhet verensstmmer med del 15 i FCC-reglerna. Drift r freml fr fljande tv villkor:
(1) Denna apparat fr inte orsaka skadliga strningar och
(2) (2) Den hr enheten mste acceptera eventuell strning, inklusive strningar som kan orsaka onskad anvndning. Varning: ndringar eller modifieringar som inte uttryckligen godknts av den som ansvarar fr verensstmmelse kanupphva anvndarens behrighet att anvnda utrustningen. OBS! Denna utrustning har testats och befunnits uppfylla grnserna fr digitala enheter i klass B, enligt del 15 i FC-reglerna. Dessa grnser r utformade fr att ge rimligt skydd mot skadliga strningar i en bostadsinstallation. Denna utrustning genererar anvndningar och kan utstrla radiofrekvensenergi och, om den inte installeras och anvnds i enlighet med anvisningarna, kan orsaka skadlig strning fr radiokommunikation. Det finns emellertid ingen garanti fratt strningar inte kommer att intrffa i en viss installation. Om denna utrustning orsakar skadliga strningar fr radio-eller tv-mottagning, som kan bestmmas genom att stnga av och p apparaten, uppmanas anvndaren att frska korrigera strningen genom en eller flera av fljande tgrderndra eller flytta mottagarantenneka avstndet mellan utrustningen och mottagarenAnslut utrustningen till ett uttag p en annan krets n den som mottagaren r ansluten till.Kontakta terfrsljaren eller en erfaren radio / tv-tekniker fr hjlp. RF varningsdeklaration:
Enheten har utvrderats fr att uppfylla det allmnna kravet p RF-exponering. Enheten kan anvndas i brbart expo-neringslge utan begrnsning.
- English: "
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device."
- French:"
Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement."
Page 8 of 8