Z-0000 & Z-/000, Warning Page READ AND SAVE THESE INSTRUCTIONS / READ THE LABEL AND ANY OPERATING MANUAL BEFORE USING PRECAUTIONS Unplug or disconnect the appliance from the power supply before replacing filters or UV lamp, or when appliance is not in use. Suitable for commercial or residential use. WARNING: To reduce the risk of fire or electric shock, do not use this machine with any solid-state speed control device. Do not operate any purifier with a damaged cord or plug, or if the wall socket is loose. Do not run cord under carpeting, throw rugs, runners, or similar coverings. Do not run cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. WARNING: Skin or eye damage may result from directly viewing the light produced by the lamps in the apparatus. A WARNING: UV radiation emitted from this device. e Unintended use of the device, or damage to the housing, may result in exposure to ultraviolet radiation. e Ultraviolet radiation may cause eye and skin irritation. e Avoid exposing eyes and skin to ultraviolet radiation. e Remove all packaging, including the filter bag, before use. e Appliances that are obviously damaged must not be operated. e This appliance must only be connected to a wall socket outlet matching the supply plug type and rating stated on the rating plate. e Locate air purifier near the outlet wall socket and do not use extension cords. e This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Do not attempt to sevice or repair this product yourself. Only use the air purifier and SensorPod with the power cable provided. Only clean this machine with a damp cloth, do not use solvents or bleach. Ensure appliance is always placed on firm level surface before operation. Do not block or obstruct the air intake or outlet vents. Do not insert fingers or other items into the air intake or outlet vents. When the air purifier is in standby mode the SensorPod is still transmitting a signal/data. FIRST AID INSTRUCTIONS - Seek medical attention in event of injury. KEEP OUT OF THE REACH OF CHILDREN. Children shall not play with the appliance. 7.6 x 7.6 inches (19.3 cm) The use of this device is a supplement to and not a substitute for standard infection control practices; users must continue to follow all current infection control practices, including those practices related to cleaning and disinfection of environmental surfaces. Z-6000/Z-7000: FCC ID: GV3-212Z7000 IC: 6128A-2127000 Sensor: FCC ID: GV3-21SPOM2 IC: 6128A-21SPOM2 EPA Est. No. 87627-CHN-1 CAN ICES-3(B)/NMB-3(B) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
e Reorient or relocate the receiving antenna. e Increase the separation between the equipment and receiver. e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. e Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement: This equipment should be installed and operated with minimum distance of 20cm between the radiator and all persons. This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) l'appareil ne doit pas produire de brouillage;
2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. ACCO Brands 101 O'Neil Road Sidney, NY 13838 Tel: 607-563-941 1 ACCO Brands Canada Inc. 7381 Bramalea Road Mississauga, ON L5S 104 Tel/Tl: 1-800-268-3447 E-mail: CustomerCare@ TruSens.com Customer Support E-mail: support@trusens.com Tel: 1-833-TRUSENS
(1-833-878-7367)