FCC ID: HEDWA6101BJ Enterprise 11b Access Point

Legra Radio LR11b Installation Guide Preliminary 009-10602-A June 2003 Legra Systems Inc. Proprietary and Confidential 2003 Legra Systems This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. All other trademarks mentioned in this document are the property of their respective owners. Preliminary Legra Systems Inc. Proprietary and Confidential Chapter 1 Contents Contents................................................................................... iii Figures ...................................................................................... v Tables...................................................................................... vii Introduction ............................................................................. ix Intended Audience ................................................................. ix Objective ................................................................................. ix About this Guide ..................................................................... x Documentation Conventions ................................................. x Related Documents ................................................................ xi Documentation Feedback .................................................... xii Technical Assistance ............................................................ xii Overview Key Features ............................................................................. 2 Power over Ethernet (PoE) Compatibility ................................................3 Radio Characteristics ...............................................................................4 MAC Addresses .......................................................................................4 LED Indicators .........................................................................................4 Additional Tools/Items ............................................................... 7 Unpacking the Legra Radio ....................................................... 8 Package Contents ...................................................................................8 Setup Overview ....................................................................... 10 LR11b Radio Configuration ...................................................................11 Legra Systems Inc. Proprietary and Confidential iii Legra Manager LM6000 NMS User Guide 009-30422-A Chapter 2 Chapter 3 Installation Safety Information ................................................................... 14 FCC Safety Compliance Statement .......................................................14 General Safety Guidelines .....................................................................14 Warnings ................................................................................................15 Installation Guidelines ............................................................. 16 Mounting Instructions Overview ................................................................................. 18 Installing the Mounting Bracket ..............................................................18 Attaching the Legra Radio to the Mounting Bracket ..............................19 Removing the Legra Radio from the Mounting Bracket .........................20 Imprinting a Legra Radio .......................................................................20 Connecting Power to the Legra Radio ...................................................21 Power over Ethernet (PoE) .............................................................21 Inline Power Injector ........................................................................22 Power Brick .....................................................................................22 Appendix A Specifications iv Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide Figures Figure 1-1 Figure 1-2 Figure 1-3 Figure 3-1 Figure 3-2 Legra Radio LR11b ............................................. 2 Legra Radio Aft Connectors ................................ 3 Legra Radio LEDs ............................................... 5 Legra Radio LR11b Mounting Bracket .............. 18 Legra Radio Power Brick (Sold Separately) ...... 22 Legra Systems Inc. Proprietary and Confidential v Legra Radio Installation Guide 009-10602-A vi Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide Tables Table 1-1 Table 1-2 Table A-1 Table A-2 Table A-3 LED Status Descriptions ...................................... 5 Legra Radio LR11b Package Contents ............... 8 Performance Specifications ..............................A-1 General Specifications ......................................A-1 Compliances .....................................................A-2 Legra Systems Inc. Proprietary and Confidential vii Legra Radio Installation Guide 009-10602-A viii Legra Systems Inc. Proprietary and Confidential Introduction Intended Audience The Legra Radio LR11b Installation Guide is intended for network or computer technicians responsible for installing the LR11b. The following assumptions are made:

The user will read this guide prior to installation. The user is familiar with concepts and terminology of wireless local area networking (WLAN). The Legra Radio LR11b Installation Guide describes the Legra Radio hardware features, physical and performance characteristics, and explains how to install the Legra Radio. For information about configuring the LR11b and associated components, see Related Documents on page xi. Objective Legra Systems Inc. Proprietary and Confidential ix Legra Radio Installation Guide About this Guide 009-10602-A The Legra Radio LR11b Installation Guide is organized into the following chapters:

Chapter Chapter 1, Overview Chapter 2, Installation Chapter 3, Mounting Instructions Appendix A, Specifications Description Contains an overview of the Legra Radio physical and functional characteristics, including the LEDs and supported standards. Contains the warnings, installation instructions, and unpacking information for installing the LR11b. Contains instructions for installing the LR11b on the contained mounting brackets. Lists the physical and environmental specifications of the LR11b and regulatory approvals. Documentation Conventions This document uses the following conventions for Warnings, Cautions, and Notes:

WARNING A Warning means danger. The reader is in a situation that could result in bodily injury. Follow standard practices for preventing accidents. CAUTION A Caution means that the reader should take care to avoid damage to the equipment. x Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide NOTE A note means that the reader should take note. Notes contain helpful suggestions or references to related documents. Related Documents The following documents provide additional information about the LR11b and associated components:

Number 009-20418-A 009-60422-A 009-20505-B 009-60610-A 009-10610-A Title Legra Switch LS2012 User Guide Legra Manager LM6000 User Guide Legra Switch LS2012 Installation Guide Legra Manager LM6000 Installation Guide Legra Radio LR11b Quick Start Guide You can download the above documents in the Support section of the the Legra Systems Inc. web site:

http://www.legra.com/

Legra Systems Inc. Proprietary and Confidential xi Legra Radio Installation Guide 009-10602-A Documentation Feedback You can submit feedback about Legra documentation at the following email address:

techpubs@legra.com Technical Assistance You can reach Legra technical support at the Legra web site:

http://www.legra.com xii Legra Systems Inc. Proprietary and Confidential 1 Overview This chapter describes:

Key Features Additional Tools/Items Unpacking the Legra Radio Setup Overview Legra Systems Inc. Proprietary and Confidential 1 Legra Radio Installation Guide 009-10602-A Key Features The Legra Radio LR11b (Figure 1-1) access point provides wireless high-speed data communications between a switch and end user stations equipped with 802.11b wireless adapters. You can connect a Legra Radio directly to a Legra Switch with a category 5 Ethernet cable, or third-party switch. Forward Figure 1-1 Legra Radio LR11b The Legra Radio can be powered by Power over Ethernet (PoE) provided through the RJ-45 Ethernet connector (Figure 1-2). When 2 Key Features Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide connected to a Legra Switch, the Legra Radio downloads software from the Legra Switch. Figure 1-2 Legra Radio Aft Connectors You can also connect the Legra Radio to a third-party vendors switch and manage the Legra Radio from a Legra Switch through your network. During the Radios initial configuration, you must imprint the Legra Switchs DNS information on the Legra Radio. For more information, see Imprinting a Legra Radio on page 20. If your third party switch does not support PoE, you can use an inline power injector to power the Legra Radio, or connect a Legra power brick to the 5V DC Power Socket. Power over Ethernet (PoE) Compatibility The Legra Radio is Power over Ethernet ready in accordance with IEEE 802.3af. The Legra Radio has a RJ-45 10/100 Ethernet connector Overview 3 Legra Systems Inc. Proprietary and Confidential Legra Radio Installation Guide 009-10602-A

(Figure 1-2). Using a category 5 cable, you can connect the Legra Radio directly to 10/100 Ethernet port on the Legra Switch LS2012, or a third party switch that supports PoE. If your third party switch does not support PoE, you can use an inline power injector or a Legra power brick (sold separately) to provide power to the Legra Radio. Radio Characteristics The Legra Radio uses a radio modulation technique known as Orthogonal Frequency Division Multiplexing (OFDM), and a shared collision domain (CSMA/CA). Data is transmitted over a half-duplex radio channel operating at up to 11 Megabits per second (Mbps), and with a maximum operating range up to 500 meters (1640 feet). MAC Addresses LED Indicators The Legra Radio is preconfigured with two Media Access Control

(MAC) addresses: one for the ethernet network connection, and one for the wireless connection with an end user station. You can view the MAC addresses on the labels located on the bottom of the Legra Radio. The ethernet MAC Address also appears in the LM6000 Network Management System (NMS) and Legra Switch LS2012 User interface when you configure your network. The Legra Radio includes four status LED indicators, as described in Figure 1-3 and Table 1-1. 4 Key Features Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide Table 1-1 LED Power LAN Switch Figure 1-3 Legra Radio LEDs LED Status Descriptions Color Green Amber Status Solid On Flashing Slow Flashing Fast Flashing Green Flashing Green On Off Slow Flashing Fast Flashing Description Indicates that power is being supplied. Indicates imprinting of LS2012 parameters in progress Imprinting information incomplete Initialization failure Indicates that the Legra Radio is transmitting or receiving data on a 10/

100 Mbps Ethernet LAN from the switch. Flashing rate is proportional to network activity. Indicates LS2012 connection. No LS2012 connection. Searching for LS2012 connection. Software upgrade in progress. Legra Systems Inc. Proprietary and Confidential Overview 5 Legra Radio Installation Guide 009-10602-A Table 1-1 LED WLAN LED Status Descriptions (Continued) Color Green Status On Off Flashing Description Indicates a valid 802.11b wireless link. No WLAN Activity Indicates that the Legra Radio is transmitting or receiving data through wireless links. Flashing rate is proportional to network activity. 6 Key Features Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide Additional Tools/Items You will need the following to install and connect your Legra Radio:

Category 5 Ethernet cable (100 meters maximum) to connect the radio to a Legra or third party switch. 3/16-inch drill for installing wall anchors. Power Drill for installing wall anchors. Phillips head screwdriver Legra Systems Inc. Proprietary and Confidential Overview 7 Legra Radio Installation Guide 009-10602-A Unpacking the Legra Radio This section describes the contents of the Legra Radio LR11b packaging. To unpack the Legra Radio 1 Open the box and carefully remove the contents. Save the packing materials. 2 Ensure that all items listed in Package Contents on page 8 are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your Legra Systems representative. Package Contents The Legra Radio package includes items shown in Table 1-2. Table 1-2 Picture Legra Radio LR11b Package Contents Item Qty Legra Radio LR11b 1 8 Unpacking the Legra Radio Legra Systems Inc. Proprietary and Confidential Legra Radio Installation Guide Legra Radio LR11b Package Contents (Continued) Item Qty 009-10602-A Table 1-2 Picture Legra Radio LR11b Quick Start Guide Support Contact Information LEDs LED Color Status Description For technical support, visit the Support section of the Legra website. http://www.legra.com Power Legra Systems, Inc. http://www.legra.com The Legra Radio LR11b access point provides wireless high-speed data communications between a switch, such as the Legra Switch LS2012, and end user stations equipped with 802.11b wireless adapters. You can connect a Legra Radio to a Legra Switch or third party switch with a category 5 Ethernet cable. The Legra Radio is Power over Ethernet (PoE) ready in accordance with IEEE 802.3af. If your third party switch does not support PoE, you can use an inline power injector or a Legra power brick (sold separately) to power the Legra Radio. Package Contents Item Legra Radio LR11b Mounting Bracket Wall Anchor, #6-10 Screw, #8-32 1-inch Legra Radio Quick Start Card Qty 1 1 4 4 1 Getting Documentation Before installing and configuring your Legra Radio LR11b, download and read the latest versions of Legra documents at the Legra Support web site:

http://www.legra.com Related Documents Download and read the following documents before installing and configuring your Legra Radio LR11b:

009-10602 009-20418 009-60422 009-20505 009-60610 Legra Radio LR11b Installation Guide Legra Switch LS2012 User Guide Legra Manager LM6000 NMS User Guide Legra Switch LS2012 Installation Guide Legra Manager LM6000 Installation Guide Additional Tools/Items You may need the following to install your Legra Radio (items available separately):

Category 5 Ethernet cable Phillips head screwdriver Power drill (for wall anchors) 3/16-inch drill bit (for wall anchors) Legra Power Brick (optional) Powe r L AN Sw i tch W LAN LR11b Green Amber Solid On Indicates imprinting complete, power is being supplied. Slow Flashing Indicates imprinting of LS2012 parameters in progress Slow Flashing Imprinting information error Fast Flashing Initialization failure Indicates that Legra Radio is transmitting or receiving data on a 10/100 Mbps Ethernet LAN from the switch. Flashing rate is proportional to network activity. Indicates LS2012 connection. No LS2012 connection. LAN Green Flashing On Off Switch Green Slow Flashing Searching for LS2012 connection. Fast Flashing Software upgrade in progress. On Off WLAN Green Flashing Indicates a valid 802.11b wireless link. No WLAN Activity Indicates that the Legra Radio is transmitting or receiving data through wireless links. Flashing rate is proportional to network activity. Mounting Bracket Wall Anchors Screws Legra Radio Quick Start Guide 1 4 4 1 009-10610-01 2003 Legra Systems Inc. Legra Systems Inc. Proprietary and Confidential Legra Systems Inc. Proprietary and Confidential Overview 9 Legra Radio Installation Guide Setup Overview 009-10602-A The LR11b radio is the last group of the Legra devices that the you should install. 1 Install and configure the Legra Manager LM6000. For more information, see the Legra Manager LM6000 Installation Guide. 2 Install and configure Legra Switch LS2012. For more information, see the Legra Switch LS2012 Installation Guide. 3 Unpack the Legra Radio LR11b. For more information, see Unpacking the Legra Radio on page 8. 4 Plan the locations of your Legra Radios. For more information, see Installation Guidelines on page 16. 5 Imprint any Legra Radios to be indirectly connected to a LS2012. For more information, see Imprinting a Legra Radio on page 20. 6 Install your Legra Radios.Mounting Instructions on page 17. 7 Configure and enable the Legra Radios through the LS2012 user interface or LM6000 Network Management System (NMS). 10 Setup Overview Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide LR11b Radio Configuration When a LR11b radio is initially connected to a switch, the Legra Radios interface is inactive. The following steps describe how to provision and activate the interface. 1 If the Legra Radio is connected to a third party switch, configure your network so that IP packets are routed to and from the Legra Radio to the Legra Switch across your network. 2 Determine the radio channel settings for the Legra Radios. You can use the LM6000s Automatic Optimizer to calculate the channel of the connected LR11b radios. After performing the calculation, the LR11b radios are operational. 3 Make any modifications to the calculated channels and transmission power. 4 Enable the radio interface on the Legra Radios from the LS2012 user interface or LM6000 NMS. Legra Systems Inc. Proprietary and Confidential Overview 11 Legra Radio Installation Guide 009-10602-A 12 Setup Overview Legra Systems Inc. Proprietary and Confidential 2 Installation This chapter describes:

Safety Information Installation Guidelines Legra Systems Inc. Proprietary and Confidential 13 Legra Radio Installation Guide 009-10602-A Safety Information The following sections describe important safety information. Following the safety guidelines and warnings when installing and operating your Legra Radio. FCC Safety Compliance Statement The Legra Radio complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The Legra Radio should be installed and operated with a minimum distance of 20 centimeters (8 inches) between the transmitter and your body. The Legra Radio must not be co-located or operating in conjunction with any other antenna or transmitter. General Safety Guidelines Do not touch or move the antennas during operation. Do not hold any component containing a radio such that the antenna is very close to or touching any exposed parts of the body, especially the face or eyes, while transmitting. Use in specific environments:

The use of wireless devices in hazardous locations is limited to the constraints posed by the local codes, the national codes and the safety directors of such environments. The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. 14 Safety Information Legra Systems Inc. Proprietary and Confidential 009-10602-A Warnings Legra Radio Installation Guide Comply with the following warnings when installing and using your Legra Radio. WARNING To comply with FCC radio frequency (RF) exposure limits, the Legra Radio antennas should be located at a minimum of 8 inches (20 cm) or more from the body of all persons when in use. WARNING Do not locate the Legra Radio antennas near overhead power lines or other electric light or power circuits, or where the Legra Radio antennas can come into contact with such circuits. WARNING Do not work on the Legra Radio or connect or disconnect cables during periods of lightning activity. WARNING Read the installation instructions before you connect the Legra Radio to its power source. WARNING This product relies on the building's installation for short-circuit

(overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Legra Systems Inc. Proprietary and Confidential Installation 15 Legra Radio Installation Guide 009-10602-A Installation Guidelines Use the following guidelines when determining the location of the LR11b radios:

In general, the best location is in the center of your wireless coverage area within line of sight of all wireless devices. The higher off of the floor you install the Legra Radio, the better the performance. Metal objects can obstruct the radio signal. Install your Legra Radio away from large steel structures such as shelving units and filing cabinets to ensure that the steel objects do not obstruct the radio signals to and from your Legra Radio. Operation of electromechanical devices, such as room fans or microwave ovens, can interfere with the radio signal. Locate your Legra Radio away from electromechanical devices to ensure that the radio signal is not interfered with during operation. Each Legra Radio should to be mounted with the provided mounting hardware. Legra Radios are connected to the LS2012 using standard category 5 cabling (less than 100 meters). If your third party switch does not use PoE or an inline power injector, use a power brick to power the Legra Radio. The power brick must be located within a 2 foot radius of the Legra Radio. 16 Installation Guidelines Legra Systems Inc. Proprietary and Confidential 3 Mounting Instructions This chapter describes:

Overview Installing the Mounting Bracket Attaching the Legra Radio to the Mounting Bracket Removing the Legra Radio from the Mounting Bracket Imprinting a Legra Radio Connecting Power to the Legra Radio Legra Systems Inc. Proprietary and Confidential 17 Legra Radio Installation Guide 009-10602-A Overview You can install the Legra Radio on horizontal or vertical flat surfaces, such as walls or ceilings. The Legra Radio includes a separate mounting bracket. You can install the mounting bracket with screws, or wall anchors and screws. Use the mounting bracket as a template to mark the locations for the attaching hardware. Installing the Mounting Bracket You can install the mounting bracket on a horizontal or vertical surface, such as a ceiling or wall. M ounting Flanges UP Figure 3-1 Legra Radio LR11b Mounting Bracket Use the holes in the mounting bracket as a template to mark the locations of the attaching hardware. If necessary, you can use the provided wall anchors to secure bracket to the surface. 18 Overview Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide CAUTION Do not install the Legra Radio upside down. Otherwise, damage to the unit may occur. If you are installing the Legra Radio on a vertical surface, ensure that the top mounting flanges are oriented up or to the side. The brackets mounting flanges support the weight of the Legra Radio. To install the mounting bracket 1 Mark the locations of the four mounting holes using the mounting bracket as a template. 2 If using the wall anchors, install the wall anchors in the four mounting hole locations. 3 Install the mounting bracket using four screws. The mounting bracket is installed. Attaching the Legra Radio to the Mounting Bracket You can connect the Legra Radio to the mounting bracket with the following procedure. To attach the Legra Radio to the mounting bracket 1 Install the Legra Radios aft mounting slots on to the mounting flanges. Be sure that the LR11b hooks engage the bracket slots. 2 Press the front of the Legra Radio to secure it to the mounting bracket. You should hear the Legra Radio snap into place. Legra Systems Inc. Proprietary and Confidential Mounting Instructions 19 Legra Radio Installation Guide 009-10602-A Removing the Legra Radio from the Mounting Bracket You can remove the Legra Radio from the mounting bracket with the following procedure. To remove the Legra Radio from the mounting bracket 1 Push the Legra Radio from front toward the aft of the unit. This decouples the hooks from the brackets mounting flanges. 2 Pull the aft portion or the Legra Radio away from the bracket and remove the Legra Radio from the mounting bracket. The Legra Radio is removed from the bracket. Imprinting a Legra Radio You can physically connect your Legra Radio to a network device other than a Legra Switch. However, before connecting, you must imprint the Legra Radio with information from a Legra Switch LS2012. Imprinting transfers the Legra Switchs DNS information on to the Legra Radio, allowing you to route IP packets to and from the Legra Radio across your network to the remote Legra Switch. The imprinting process begins when you plug the Legra Radio into a Legra Switch with a category 5 Ethernet cable. The Legra Switch sends Power over Ethernet and DNS information to the Legra Radio. The Legra Radios Power LED blinks slowly during the imprinting process and becomes solid green when imprinting is complete. When imprinting is complete, you can disconnect the Legra Radio, install it, and connect it to your network device. You must then configure your network so that the Legra Switch and Legra Radio transmit IP packets to one another through your network. You can remove the imprinted information when you hold down the RESET button for several seconds. After RESET, you must then connect the the Legra Radio to imprint information from another Legra Switch. 20 Overview Legra Systems Inc. Proprietary and Confidential 009-10602-A Legra Radio Installation Guide To imprint LS2012 information on a Legra Radio 1 Connect a category 5 Ethernet cable to the Legra Switch 10/100 Ethernet port. 2 Connect the cable to the Legra Radios RJ-45 Ethernet Port. The green Legra Radio Power LED blinks slowly. The LED turns solid green when imprinting is complete. The Legra Radio is imprinted. Connecting Power to the Legra Radio Use one of the following methods to provide power to the Legra Radio:

Power over Ethernet (PoE) Inline Power Injector Power Brick Power over Ethernet (PoE) If you connect a Legra Radio directly to a Legra Switch, the Legra Radio operates on PoE from the Legra Switch. After you connect a category 5 Ethernet cable to your Legra Switch, additional power connections are not required. You can also connect your Legra Radio to a third party switch. If the third party switch does not support PoE, use an inline power injector or power brick to power the Legra Radio. If the third party switch supplies Power over Ethernet, additional power connections are not required. Legra Systems Inc. Proprietary and Confidential Mounting Instructions 21 Legra Radio Installation Guide 009-10602-A Inline Power Injector If your third party switch does not support PoE, you can place a power injector inline between the switch port and the Legra Radio. See your power injector documentation for installation and usage instructions. Power Brick If a power injector cannot be used, use a power brick (Figure 3-2) to power the Legra Radio. Power Brick Power Cord Mounting Bracket Figure 3-2 Legra Radio Power Brick (Sold Separately) The power brick connects to a wall outlet at one end and the Legra Radio 5V DC Power Socket at the other. The power brick must be located within a 2 foot radius of the Legra Radio. The Legra power brick and mounting bracket are sold separately. Contact your Legra System Inc representative for more information. 22 Overview Legra Systems Inc. Proprietary and Confidential A Specifications Performance Specifications Table A-1 Name 802.11b Maximum Clients Operating Range Data Rate Network Configuration Operating Frequency Power supply Output Power Description FCC/IC: 1-11 ETSI: 1-13 France: 10-13 Spain: 10-11 MKK: 1-14 64 Up to 500 m (1640 ft) Normal Mode: 1, 2, 5.5, 11 Mbps per channel Infrastructure 5.15 ~ 5.25 GHz (lower band) US/Canada, Japan 5.25 ~ 5.35 GHz (middle band) US/Canada 5.725 ~ 5.825 GHz (upper band) US/Canada Input: 100-240 AC, 50-60 Hz Output: 5 VDC, 3 A 16 dBm minimum Table A-2 Characteristic Physical Size Weight LED Indicators General Specifications Specification 20.5 13.6 4 cm, (8.07 5.35 1.58 in) 280 grams (9.9 oz) See LED Indicators on page 4. Legra Systems Inc. Proprietary and Confidential A-1 Legra Radio Installation Guide 009-10602-A Table A-2 Characteristic Network Management Operating Systems General Specifications Specification Legra Manager LM6000 Network Management System Legra Switch LS2012 User Interface Windows 98/Me/NT/2000/XP Operating: 0 to 50 C (32 to 122 F) Storage: 0 to 70 C (32 to 158 F) 5% to 95% (non-condensing) Temperature Humidity Table A-3 Category Compliances Emissions Safety Standards Compliances Standard IEC 61000-4-2/3/4/6/11 FCC Class B RCR STD-33A CSA/NTRL (CSA 22.2 No. 950 & UL 1950) EN60950 (TUV/GS), IEC60950 (CB) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.11a/b IEEE 802.3af PoE A-2 Legra Systems Inc. Proprietary and Confidential Contact Information Legra Systems, Inc. 3 Burlington Woods Drive Burlington, MA 01803-4543 Tel: (781) 272-8400 Fax: (781) 272-8401 Website: http:\\www.legra.com Legra Systems Inc. Proprietary and Confidential Legra Systems, Inc. 3 Burlington Woods Drive Burlington, MA 01803-4543 Tel: (781) 272-8400 Fax: (781) 272-8401 Website: http:\\www.legra.com 009-10602-A 2003 Legra Systems. All rights reserved. Legra Systems Inc. Proprietary and Confidential