BSG12 BUSINESS SERVICE GATEWAY INSTALLATION MANUAL 2 Users Manual

BSG12ew BSG12ew Quick Installation Guide You can download all documents referenced in this Quick Installation Guide at www.nortel.com Tools and materials 1 Before you install the Business Services Gateway (BSG), ensure that you have the following package contents and materials:

4 5 Install the power supply next to the BSG. The power supply must be within 1.5 m (5 ft) of the BSG and within 1.5 m (5 ft) of the AC power outlet (wall outlet or universal power supply). Connect the 48V DC 4-pin DIN power supply connector into either of the power outlets at the back of your BSG. Two power outlets Package Contents BSG unit power supply and power cord two omni-directional antennas console cable assembly Quick Installation Guide four self-adhesive rubber feet Regulatory sheet Hazardous Substance table standard Ethernet cable (WAN connection) two to three RJ-11 telephony cables (if using analog devices) Additional Required Materials (not included) Caution: Risk of equipment damage To avoid damaging the equipment, you must connect the BSG to an outlet with a third-wire ground. Use the BSG with only the supplied BSG power supply and a three-wire power outlet Installing the BSG unit For optional methods to install your BSG, see the BSG8ew and BSG12ew/aw/tw 1.0 Installation Guide (NN47928-302). 2 Attach the four self-adhesive rubber feet to the bottom of the BSG by peeling off the paper backing and placing the feet on the unit. Attach feet here 3 Position the BSG on a desktop. Make sure you leave enough space around the unit for ventilation and access to the cables. 6 Connect one end of the AC power cord into the AC power supply. Plug the other end of the AC power cord into the AC power outlet

(wall outlet or universal power supply).The System LED on the front panel lights up. Connecting LAN devices (VoIP phones and PCs) 7 Plug one end of a standard Ethernet cable into one of the eleven LAN ports on the front of your BSG. Plug the other end of the Ethernet cable into your LAN device, such as a VoIP phone or PC. PoE/Link/Act LEDs LAN ports 8 Ensure that the corresponding LAN port PoE/Link/Act LED lights up. The corresponding LED will come on only if the device connecting to that port is powered on. Connecting the WAN 9 Plug one end of the standard Ethernet cable into the WAN port (port 12) of the BSG. Plug the other end into the service providers cable modem or DSL modem. WAN port Attach the omni-directional antennas to the wireless LAN antenna connectors on the back of the BSG. Optional installations Connecting wireless 10 Connecting analog or fax devices 11 Plug one end of an RJ-11 telephone cable into either of the FXS analog telephone

(RJ-11) ports on the front of the BSG. Plug the other end of the cable into the analog device. FXS ports FXO port Console port System LED Connecting the Public Switched Telephone Network 12 Plug one end of an RJ-11 telephone cable into the FXO analog line (RJ-11) port on the front of the BSG. Plug the other end of the cable into the telephone jack on the wall. Configuring the initial system settings Complete the following steps using the BSG Quick Start Wizard. Before you start, contact your Internet service provider (ISP) to obtain your user name, password, and encapsulation type information (Ethernet, PPPoE). 13 14 15 16 17 18 19 From a PC connected to the LAN, open a new Web browser, type http://192.168.1.1 into the address bar, and press Enter to start the Web user interface. In the Login window, enter your user name (nnadmin) and password

(PlsChgMe!), and click Login. In the navigation pane on the left, click Quick Start Wizard. Click the blue forward button to start the wizard. Enter your ISP name, user name, and password, and confirm your password by entering it again. For more information about additional settings within the Quick Start Wizard, see the BSG8ew and BSG12ew/aw/tw 1.0 Configuration Guide (NN47928-500). Click Next and enter information on each wizard page as required. On the Review Data page, click Continue. Congratulations! You have successfully configured the Nortel Business Services Gateway!

N0153680 NN47928-304 Standard 01.01 Printed in Canada. Copyright Nortel Networks Limited 2007. All Rights Reserved