all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 2.75 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual | Users Manual | 2.75 MiB |
SMC7901WBRA1 User Manual i Contents 1. Introduction..................................................................................................................................................................1 1.1 Package List........................................................................................................................................................1 1.2 Safety Cautions...................................................................................................................................................1 1.3 Description of LED and Interface........................................................................................................................2 1.4 System Requirements..........................................................................................................................................3 1.5 Features..............................................................................................................................................................3 2. Hardware Installation....................................................................................................................................................5 3. Introducing Web Configuration.....................................................................................................................................7 3.1 How to access Router..........................................................................................................................................7 3.2 Status..................................................................................................................................................................8 3.2.1 System......................................................................................................................................................8 3.2.2 LAN.........................................................................................................................................................8 3.2.3 WLAN.....................................................................................................................................................9 3.2.4 WAN......................................................................................................................................................10 3.2.5 Port Mapping..........................................................................................................................................10 3.2.6 Statistic...................................................................................................................................................11 3.2.6.1 Traffic Statistic....................................................................................................................................11 3.2.6.2 DSL Statistic........................................................................................................................................11 3.2.7 ARP Table..............................................................................................................................................12 3.3 Wizard..............................................................................................................................................................12 3.3.1 Wizard....................................................................................................................................................13 3.4 LAN..................................................................................................................................................................19 3.4.1 LAN Settings..........................................................................................................................................19 3.4.2 DHCP Settings........................................................................................................................................20 3.5 WLAN..............................................................................................................................................................24 3.5.1 Basic Settings.........................................................................................................................................24 3.5.2 Security..................................................................................................................................................26 3.5.3 Advance Settings....................................................................................................................................28 3.5.4 Access Control........................................................................................................................................29 3.5.5 WDS Settings.........................................................................................................................................30 3.6 WAN................................................................................................................................................................31 3.6.1 WAN Interface.......................................................................................................................................31 ii 3.6.2 ADSL Settings........................................................................................................................................34 3.7 Advance............................................................................................................................................................35 3.7.1 DNS.......................................................................................................................................................35 3.7.1.1 DNS Server..........................................................................................................................................35 3.7.1.2 DDNS..................................................................................................................................................36 3.7.2 Firewall..................................................................................................................................................36 3.7.2.1 IP\Port Filter........................................................................................................................................36 3.7.2.2 MAC Filter..........................................................................................................................................37 3.7.2.3 URL Blocking......................................................................................................................................38 3.7.3 Virtual Server.........................................................................................................................................38 3.7.3.1 Services...............................................................................................................................................38 3.7.3.2 DMZ Settings......................................................................................................................................39 3.7.4 Routing...................................................................................................................................................39 3.7.4.1 RIP......................................................................................................................................................40 3.7.4.2 Static Route.........................................................................................................................................40 3.7.5 IP QoS....................................................................................................................................................41 3.7.6 Anti-dos..................................................................................................................................................41 3.6.7 Port Mapping..........................................................................................................................................42 3.7.8 Other......................................................................................................................................................43 3.7.8.1 IGMP Proxy.........................................................................................................................................43 3.7.8.2 UPNP..................................................................................................................................................44 3.7.8.3 Bridge..................................................................................................................................................44 3.7.7.4 IP PassThrough....................................................................................................................................45 3.8 Admin...............................................................................................................................................................46 3.8.1 Remote Access.......................................................................................................................................46 3.8.2 Commit/Reboot......................................................................................................................................46 3.8.3 Password................................................................................................................................................47 3.8.4 Backup/Restore.......................................................................................................................................48 3.8.5 Upgrade Fireware...................................................................................................................................48 3.8.6 Time Zone..............................................................................................................................................49 3.8.7 System Log.............................................................................................................................................50 3.8.8 SNMP.....................................................................................................................................................51 3.8.9 TR069....................................................................................................................................................52 3.8.10 ACL.....................................................................................................................................................53 3.9 Diagnostic.........................................................................................................................................................53 iii 3.9.1 Ping........................................................................................................................................................53 3.9.2 ATM Loopback......................................................................................................................................54 3.9.3 ADSL.....................................................................................................................................................54 3.9.4 Diagnostic..............................................................................................................................................55 4. FCC Information.........................................................................................................................................................56 iv 1. Introduction The ADSL access device supports multiple line modes. It provides one 10/100Base-T Ethernet interface at the user end. Utilizing the high-speed ADSL connection, the device provide users with broadband connectivity to the Internet or the Intranet for high-end users as net bars, office users, etc. can provide a downlink speed up to 24 Mbit/s and uplink speed up to 1 Mbit/s. The device supports WLAN access, as WLAN AP or WLAN router, to internet. It is compliance with IEEE 802.11,802.11b/g specifications, and complies with WEP, WPA and WPA2 security specifications. 1.1 Package List l One one port wifi router l One external splitter l One power adapter l Two pieces of telephone lines(RJ-11) l One piece of Ethernet cable(RJ-45) l One copy of QIG l One copy of driver and utility software CD 1.2 Safety Cautions Follow these announcements below to pretect the device from risks and damage caused by fire or electric power. 4 Use volume labels to mark the type of power. 4 Use the power adapter packed within the device package. 4 Pay attention to the power load of the outlet or prolonged lines. An overburden power outlet or damaged lines and plugs may cause electric shock or fire accident. Check the power cords regularly. If you find any damage, replace it at once. 4 Proper space left for heat radiation is necessary to avoid any damage caused by overheating to the device. The long and thin holes on the Access Point are designed for heat radiation to make sure the device works normally. Dont cover these heat radiant holes. 4 Do not put this device close to a place where a heat source exits or high temperature occurs. Avoid the device from direct sunshine. 4 Do not put this device close to a place where is over damp or watery. Do not spill any fluid on this device. 4 Do not connect this device to any PC or electronic product, unless our customer engineer or your broadband provider instructs you to do this, because any wrong connection may cause any power or fire risk. 4 Do not place this device on an unstable surface or support. 1 1.3 Description of LED and Interface Front panel Fig 1.3-1 Front panel No power Descriptions Initial self-test failed Device init Fireware upgrade Status OFF GREEN Device init OK RED RED BLINK OFF BLINK Device is detecting itself ON OFF BLINK ON OFF BLINK ON OFF BLINK WLAN data transiting ON Initial self-test of the unit is OK and ready Internet connection failed Internet data transiting Internet connection OK No LAN link LAN data transiting LAN link established and active Inactive Active LED POWER Color Green/Red DSL Green Internet Green LAN Green WLAN Green Rear panel Fig 1.3-2 Rear panel 2 Items DSL Reset Ethernet PWR Usage Line RJ-11 port Resets to factory defaults. To restore factory defaults, keep the device powered on and push a paper clip in to the hole. Press down the button over 5 seconds and then release. Ethernet RJ-45 port Power On/Off. Power connector. DC 12 Volta positive. ge/1000mA,female pole is 1.4 System Requirements Make sure first that you have prepared these following items to guarantee the Router can work normally. 4 Services subscriptions 4 An 10BaseT/100BaseT Ethernet card installed on your PC 4 HUB or Switch. (Attached to several PCs through one of Ethernet interfaces on the device) 4 Operation system: Windows 98SE, Windows 2000, Windows ME, or Windows XP 4 Internet Explorer V5.0 or higher, or Netscape V4.0 or higher, or firefox 1.5 or higher. 1.5 Features 4 Supports various line modes 4 Supports external PPPoE dial-up access 4 Supports internal PPPoE/PPPoA dial-up access 4 Supports leased line mode 4 Supports ZIPB (Zero Installation PPP Bridge Mode) 4 Supports 1483B/1483R/MER access 4 Supports multiple PVCs(eight at most) and these PVCs can be isolated from each other 4 Support a single PVC with multiple sessions 4 Support multiple PVCs with multiple sessions 4 Supports the binding of the ports and the PVCs 4 Supports the 802.1Q and 802.1P protocol 4 Supports DHCP server 4 Supports NAT/NAPT 4 Supports static route 4 Supports firmware upgradeWEB/tftp/ftp 4 Supports reset to factory default:reset, WEB 4 Supports DNS relay 4 Supports Virtual server 4 Supports DMZ functions 4 Supports two-level passwords and usernames 4 Supports WEB interface 4 Supports telnet CLI 3 4 Supports System status display 4 Supports PPP session PAP/CHAP 4 Supports IP filter function 4 Supports IP QoS function 4 Supports remote access control 4 Supports line connection status test 4 Supports remote managementTelnet; HTTP 4 Supports configuration file backup and restoration function 4 Ethernet supported such as Crossover Detection & Auto-Correction and polarity correction 4 Supports UPnP 4 2. Hardware Installation 1Refer to the figure below: Connect the DSL port of the device and the ROUTER port of the splitter with a telephone cable; connect the phone to the Phone port of the splitter through a cable; connect the incoming line to the Line port of the splitter. The splitter has three ports LINE: Connects to a wall phone jack (RJ-11 jack) ROUTER: Connects to the DSL jack of the device PHONE: Connects to a telephone set 2Connect the LAN port of the device to the network card of the PC via an Ethernet line (MDI/MDIX). Note: Use twisted-pair cables to connect with the HUB/Switch. 3Plug the power adapter to the wall outlet and then connect the other end of it to the PWR port of the device. Connection 1: Fig. 2-1 displays the application diagram for the connection of the Router, PC, splitter and telephone set Fig 2-1 Connection DiagramWithout connecting telephone sets before the splitter Connection 2As illustrated in the following figure, the splitter is installed close to the device. 5 Fig 2-2 Connection DiagramConnecting a telephone set before the splitter l It is recommended to follow the Connection 1 in an actual connection!
l Note: When Connection 2 is used, the filter must be installed close to the telephone lines. (See Fig. 2-2. Do not use the splitter instead of the filter). Installing a telephone directly before the splitter may lead to a failure of connection between the device and the device of LAN side, or cannot access into the Internet, or slow the connection speed if you really need to add a telephone set before the splitter, you have to add a MicroFilter before connecting to a telephone set. Do not connect several telephones before the splitter. Moreover, do not connect several telephones with MicroFilters. 6 3. Introducing Web Configuration 3.1 How to access Router The following introductions are prepared for the first time users, it is a detail How-To user guide. 1 Open IE browserthen enter http://192.168.1.1 in address bar. 2 You are required to enter user name and password. See the Fig 3.2-1. l The super user name and password is admin/admin l The common user name and password is user/user Fig 3.1-1 3 If you enter as super user, the below screen will be displayed when you enter successfully. Fig 3.1-2 7 After you enter router as super user, you can check, config and modify all the options. You can use the system diagnostic function also. If you enter as common user, you can check the status of ROUTER, but cant change the most of options. 3.2 Status Click Status in the menu to open the sub-menu which contains 7 items: System, LAN, WLAN, WAN, Port Mapping, Statistic and ARP Table. 3.2.1 System Click System in the sub-menu to open the screen of Fig 3.2.1. In this page, you can view the current status and some basic settings of this router, for example, Software Version, DSL mode, Upstream Speed, Downstream Speed, Uptime and so on. Fig 3.2.1 3.2.2 LAN Click LAN in the sub-menu to open the screen of Fig 3.2.2. In this page, you can view the LAN IP, DHCP Server status, MAC Address and DHCP Client Table. If you want to config the LAN network, refer to chapter 3.4.1 LAN Settings. 8 Fig 3.2.2 3.2.3 WLAN Click LAN in the sub-menu to open the screen of Fig 3.2.3. In this page, you can view the parameters of the WLAN. Fig 3.2.3 9 3.2.4 WAN Click WAN in the sub-menu to open the screen of Fig 3.2.4. In this page, you can view basic status of WAN, Default Gateway, DNS Server, etc. If you want to config the WAN network, refer to chapter 3.6.1 WAN Interface. Fig 3.2.4 3.2.5 Port Mapping Click Port Mapping in the sub-menu to open the screen of Fig 3.2.5. In this page, you can view the mapping relation and the status of port mapping. Fig 3.2.5 10 3.2.6 Statistic Click Statistic in the sub-menu to open the menu in the left bar, whick contains two items:Traffic Statistic and DSL Statistic. 3.2.6.1 Traffic Statistic Click Traffic Statistic in the left bar to open the screen of Fig 3.2.6.1. In this page, you can view the statistics of each network port. Fig 3.2.6.1 3.2.6.2 DSL Statistic Click DSL Statistic in the left bar to open the screen of Fig 3.2.6.2. In this page, you can view the ADSL line statistics, downstream rate, upstream rate, etc. 11 Fig 3.2.6.2 3.2.7 ARP Table Click ARP Table in the sub-menu to open the screen of Fig 3.2.7. In this page, you can view the talbe which shows a list of learned MAC addresses. Fig 3.2.7 3.3 Wizard Click Wizard in the menu to open the sub-menu which contains one item: Wizard. 12 3.3.1 Wizard Wizard enables speedy and accurate configuration of your Internet connection and other important parameters. The following sections describe these various configuration parameters. Whether you configure these parameters or use the default ones, click 'Next' to enable your Internet connection. When subscribing to a broadband service, you should be aware of the method by which you are connected to the Internet. Your physical WAN device can be either Ethernet, DSL, or both. Technical information regarding the properties of your Internet connection should be provided by your Internet Service Provider
(ISP). For example, your ISP should inform you whether you are connected to the Internet using a static or dynamic IP address, or what protocols, such as PPPOA or PPPoE, you will be using to communicate over the Internet. Click Wizard in the sub-menu to open the screen of Fig 3.3.1-1. In this page, you can config the VPI/VCI number. Fig 3.3.1-1 Be sure to use the correct Virtual Path Identifier(VPI) and Virtual Channel Identifier(VCI) numbers assigned to you. The valid range for VPI is 0 to 255 and for VCI is 32 to 65535(0 to 31 is reserved for local management of ATM traffic). Then press Next, the Fig 3.3.1-2 screen will appear. In this page, you can select the WAN Connect Type and the encapsulation method. 13 The following table describes the fields in this screen. Fig 3.3.1-2 Label WAN Connection Type Encapsulation Mode
< Back Next >
Description Select the WAN Connection Type here, you can select PPPoA, PPPoE, 1483 MER, 1483 Routed or 1483 Bridged. Select the method of encapsulation used by your ISP from the drop-down list box. Choises are LLC/SNAP or VC-Mux. Click < Back to return to the previous screen Click Next > to go to the next screen If you select PPPoA or PPPoE in WAN Connection Type, click Next, the screen of Fig 3.3.1-3 appears as shown next. Fig 3.3.1-3 The following table describes the fields of this screen. Description The dynamic IP is not fixed; your ISP assigns you the different one each Label Obtain an IP address 14 automatically Use the following IP address WAN IP Address Enable NAT
< Back Next >
time. A static IP is a fixed IP that your ISP gives you. Input the IP address of the WAN interface provided by your ISP Select it to enable the NAT functions of the MODEM. If you are not to enable NAT and intend the user of the MODEM to access the Internet normally, you must add a route on the uplink equipment; otherwise the access to the Internet will fail. Normally, it is required to enable NAT. Click < Back to return to the previous screen Click Next > to go to the next screen Then click Next, the screen of Fig3.3.1-4 appears as shown next. Fig 3.3.1-4 The following table describes the fields of this screen. Label PPP Username PPP Password PPP Connection Type
< Back Next >
Description The username and password apply to PPPoE and PPPoA encapsulation only. Make sure that you have entered the correct username and password. Choices are Continuous, Connect on Demand and Manual. Click < Back to return to the previous screen Click Next > to go to the next screen Then click Next, the screen of Fig3.3.1-5 appears as shown next. 15 Fig 3.3.1-5 Label LAN IP LAN Netmask Enable Secondary IP Secondary LAN IP The following table describes the fields of this screen. Description Enter the IP address of your ROUTER in dotted decimal notation, for example, 192.168.1.1(factory default) Type the subnet mask of LAN IP. Select this check box to enable the secondary LAN IP Enter the secondary IP address of your ROUTER in dotted decimal notation, for example, 192.168.100.1(factory default) Type the subnet mask of the secondary LAN IP Select this check box to enable the DHCP Server This field specifies the first of the contiguous addresses in the IP address pool. This field specifies the last of the contiguous addresses in the IP address pool. Click < Back to return to the previous screen Click Next > to go to the next screen Secondary LAN Netmask Enable DHCP Server Start IP
< Back Next >
End IP If you finish the settings of this page, click Next, the screen appears as shown next. 16 Fig 3.3.1-7 If you select 1483 MER in Fig 3.3.1-2, the screen appears as shown next. Fig 3.3.1-8 The following table describes the fields of this screen. 17 Label Obtain an IP address automatically Use the following IP address WAN IP Address WAN Subnet Mask Default Gateway Obtain DNS server addresses automatically Use the following DNS server addresses Primary DNS server Secondary DNS server Enable NAT
< Back Next >
Description The MODEM will obtain a (WAN) IP address automatically and at this time it will enable DHCP Client functions. The WAN IP address is obtained from the uplink equipment like BAS and the uplink equipment is required to enable the DHCP Server functions. If you want to input the WAN ip address by yourself. Check this entry and then input related data in the field. Input the IP address of the WAN interface provided by your ISP Input the subnet mask concerned to the IP address of the WAN interface provided by your ISP. You can input the IP address of the default gateway by yourself, click this entry and then input related data in the fields. To obtain the IP address of the DNS server assigned by the uplink equipment such as BAS. If you want to input the IP address of the DNS server by yourself, click this entry and then input related data in the fields. Input the IP address of the primary DNS server here. Input the IP address of the secondary DNS server provided by your ISP here. Select it to enable the NAT functions of the MODEM. If you are not to enable NAT and intend the user of the MODEM to access the Internet normally, you must add a route on the uplink equipment; otherwise the access to the Internet will fail. Normally, it is required to enable NAT. Click < Back to return to the previous screen Click Next > to go to the next screen If you finish the settings of this page, click Next, the screen of Fig 3.3.1-6 appears. The settings of this screen, see above paragraphs. If you select 1483 Routed in Fig 3.3.1-2, the screen of Fig 3.3.1-9 appears as shown next. Fig 3.3.1-9 18 The following table describes the fields of this screen. Label None Obtain an IP address automatically Use the following IP address WAN IP Address WAN Subnet Mask Obtain DNS server addresses automatically Use the following DNS server addresses Primary DNS server Secondary DNS server Enable NAT
< Back Next >
Description The dynamic IP is not fixed; your ISP assigns you the different one each time. A static IP is a fixed IP that your ISP gives you. Input the IP address of the WAN interface provided by your ISP Input the subnet mask concerned to the IP address of the WAN interface provided by your ISP. To obtain the IP address of the DNS server assigned by the uplink equipment such as BAS. If you want to input the IP address of the DNS server by yourself, click this entry and then input related data in the fields. Input the IP address of the primary DNS server here. Input the IP address of the secondary DNS server provided by your ISP here. Select it to enable the NAT functions of the MODEM. If you are not to enable NAT and intend the user of the MODEM to access the Internet normally, you must add a route on the uplink equipment; otherwise the access to the Internet will fail. Normally, it is required to enable NAT. Click < Back to return to the previous screen Click Next > to go to the next screen 3.4 LAN Click LAN in the menu to open the sub-menu which contains 2 items: LAN Settings and DHCP Settings. You can use the LAN configuration to define an IP address for the DSL Router and configure the DHCP server. 3.4.1 LAN Settings On this screen you can change the device's IP address. The preset IP address is 192.168.1.1. This is the Private IP address of the DSL Router. This is the address under which the device can be reached in the local network. It can be freely assigned from the block of available addresses. Click LAN Settings in the sub-menu to open the screen of Fig 3.4.1. In this page you can config the LAN network. 19 Fig 3.4.1 The following table describes the fields of this screen. Label IP Address Subnet Mask Description Input the IP of Local area network interface here. We recommend that you use an address from a block that is reserved for private use. This address block is 192.168.1.1- 192.168.255.254 Select this checkbox to enable the secondary LAN IP. The two LAN IP must be in the different network. Click this button to save the settings of this page. Secondary IP Apply Changes 3.4.2 DHCP Settings DHCP(Dynamic Host Configuration Protocol) allows the individual client(computers) to obain the TCP/IP configuration at start-up from the centralize DHCP server. You can configure this router as a DHCP server or disable it. DHCP server can assign IP address, an IP default gateway and DNS server to DHCP clients. This router can also act as a surrogate DHCP server(DHCP Proxy) where it relays IP address assignment from a actual real DHCP server to clients. If the DHCP was disabled, the screen of Fig 3.4.2-1 appears. You can enable/disable DHCP Server or DHCP Proxy. 20 If you set to DHCP Proxy, the screen of Fig 3.4.2-2 appears. Fig 3.4.2-1 Fig 3.4.2-2 The following table describes the fields of this screen. Label DHCP Proxy Description If set to DHCP Proxy, your ROUTER acts a surrogate DHCP Server and relays the DHCP requests and reponses between the remote server and the client. Enter the IP address of the actual, remote DHCP server in this field. Click this button to save the changes of this page. DHCP Server Address Apply Changes If you set to DHCP Server, the screen of Fig3.4.2-3 appears as shown next. 21 Fig 3.4.2-4 The following table describes the fields in this screen. Label IP Address MAC Address Description This field displays the IP address relative to the MAC address. This field displays the MAC(Media Access Control) address of the computer. Every Ethernet device has a unique MAC address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal character, for example, 00-A0-C5-00-02-12. Here shows the lease time. The Lease time determines the period for which the PCs retain the IP addresses assigned to them without changing them. Click this button to refresh the Active DHCP Client Table. Click this button to close this window. Time Expired(s) Refresh Close Click MAC-Base Assignment button, the below window appears. In this page, you can assign IP addresses on the LAN to specific individual computers based on their MAC address. Fig 3.4.2-5 23 The following table describes the fields of this screen. Label Host MAC Address Assigned IP Address Assign IP Description Type the MAC address of a computer on your LAN This field specifics the IP of the IP address pool. Click this button after entered Host MAC Address and Assigned IP Address, a row will be added in MAC-Base Assignment Table. Select a row in MAC-Base Assignment Table, the MAC address and IP address will appears Host MAC Address and Assigned IP Address. After modified the MAC Address and IP Address, click this button to save the changes. Select a row in MAC-Base Assignment Table, then click this button, this row will be deleted. Click this button to close this window. This table shows the assigned IP address based on the MAC address. Modify Assigned IP Delete Assigned IP Close MAC-Base Assignment Table 3.5 WLAN Click WLAN in the menu to open the sub-menu which contains 5 items: Basic Settings, Security, Advance Settings, Access Control and WDS Settings. This session introduces the wireless LAN and some basic configurations. Wireless LANs can be as simple as tow computers with wireless LAN cards communicating in a pear-to-pear network or as complex as a number of computers with wireless LAN cards communicating through Access Points which bridge network traffic to wired LAN. 3.5.1 Basic Settings Click Basic Settings in the sub-menu to open the screen of Fig 3.5.1-1. This page is used to configure the parameters for wireless LAN clients which may connect to your Access Point. 24 Fig 3.5.1-1 The following table describes the fields of this screen. Label Description Disable Wireless LAN Interface
(Root)SSID Virtual SSID Set VSSID SSID Country/Area Channel Number Apply Changes The wireless LAN is turned on by default. Select the check box to disable the wireless LAN. The SSID(Service Set Identification) is a unique name to identify the ROUTER in the wireless LAN. Wireless stations associating to ROUTER must have the same SSID. Enter a desciptive name. You can enable 4 SSID at most. Click Set VSSID, the screen of Fig3.6.1-2 appears. You can enable or disable this SSID. Select the region where you are. A channel is the radio frequency(ies) used by 802.11b/g wireless device. Channels available depend on your geographical area. You may have a choice of channels(for your region) so you should use a different channel than an adjacent AP(Access Point) to reduce interference. Interference occurs when radio signal from diffirent access point overlap causing interference and degrading performance. Select a channel from the drop-down list box. Click this button to save the changes of this page. 25 Fig 3.5.1-2 The following table describes the fields of this screen. Label SSID Apply Changes Undo Description The SSID(Service Set Identification) is a unique name to identify the ROUTER in the wireless LAN Click this button to save the changes of this page. Click this button to begin configuring this screen afresh. 3.5.2 Security Click Security in the sub-menu to open the screen of Fig 3.5.2-1. Wireless security is vital to your network to pretect wireless communication between wireless stations, access points and wired network. 26 The following table describes the fields of this screen. Fig 3.5.2-1 Label SSID Type Encryption Set WEP Key Authentication RADIUS Server Port IP Address Password Apply Changes Description Select the SSID here. Choices are None, WEP, WPA(TKIP), WPA2(AES) and WPA2 Mixed. WEP(Wired Equivalent Privacy) entrypts data frames before transmitting over the wireless network. WPA(Wi-Fi Protected Access) is a subset of the IEEE802.11i security specification draft. Key differences between WPA and WEP are user authentication and improved data encryption. This button is available when you set to WEP. Click this button, the screen of Fig3.6.2-2 appears. RADIUS is based on a client-server model that supports authentication, authorization and accounting. The access point is client and the server is RADIUS server. RADIUS is a simple package exchange in which your ROUTER acts as a message relay between wireless station and the network RADIUS server. The default port of the RADIUS server for authentication is 1812. You need not change this value unless your network administrator instructs you to do so with additional information. Enter the IP address of the RADIUS server. Enter a password as the key to be shared between the external authentication server and the access point. The key is not send over the network. This key must be the same on the external authentication server and your ROUTER. Click this button to save the the changes of this page. 27 The following table describes the fields of this screen. Fig 3.5.2-2 Label SSID Type Key Length Key Format Default Tx Key Encryption Key 1 to 4 Apply Changes Close Undo Description Select the SSID here. Select 64-bit or 128-bit to use data encryption. If you chose 64-bit, you can choose ASCII(5 characters) or Hex(10 characters). If you chose 128-bit, you can choose ASCII(13 characters) or Hex(26 characters). Select the default Encryption Key here. The Encryption keys are used to encrypt data. Both ROUTER and wireless stations must use the same Encryption Key for data transmission. If you chose 64-bit and ASCII(5 characters), then enter any 5 ASCII characters. If you chose 64-bit and Hex(10 characters), then enter any 10 hexadecimal characters. If you chose 128-bit and ASCII(13 characters), then enter any 13 ASCII characters. If you chose 128-bit and Hex(26 characters), then enter any 26 hexadecimal characters. Click this button to save the changes of this page. Click this button to close this window. Click this button to begin configuring this screen afresh. 3.5.3 Advance Settings Click Advance Settings in the sub-menu to open the screen of Fig 3.5.3. These settings are only for more technically advanced users who have a sufficient knowledge about wireless LAN. These settings should not be changed unless you know what effect the changes will have on your Access Point. 28 The following table describes the fields of this screen. Fig 3.5.3 Label Fragment Threshold RTS Threshold Apply Changes 3.5.4 Access Control Description This is the maximum data fragment size(between 256 and 2346bytes) that can be sent in the wireless network before the ROUTER will fragment the packet into smaller data frames. RTS(Request To Send) is designed to prevent collisions due to hidden node. A RTS defines the biggest size data frame you can send before a RTS(Request To Send) handshake invoked. The RTS Threshold value is between 0 and 2347. If the RTS Threshold value is greater than Fragment Threshold value, then the RTS hankshake will never occur as the data frames will be fragmented before they reach RTS size. Click this button to save the changes of this page. Click Access Control in the sub-menu to open the screen of Fig 3.5.4. In this page, you can configure the Wireless Access Control. 29 The following table describes the fields of this screen. Fig 3.5.4 Label Select Access Control Mode Apply Changes MAC Addr Apply Changes Reset Current Access Control List Delete Delete All Reset 3.5.5 WDS Settings Description Choises are Disable, Allow Listed and Deny Listed. Select Allow Listed to block access to the router, MAC addresses not listed will be allowed to access your router. Select Deny Listed to permit access to the router, MAC addresses not listed will be denied to access your router. Click this button to save the change of Select Access Control Mode. Enter the MAC address(in XX-XX-XX-XX-XX-XX format) of the wireless station that are allowed or denied access to your router in this address field. Click this button, the MAC Addr will be added to Current Access Control List. Click this button to begin configuring the MAC Addr afresh. The MAC address in this table will be allowed or denied access to the router. Click this button to delete the row you select in the Current Access Control List. Click this button to delete all rows in the Current Access Control List. Click this button to begin configuring the Current Access Control List afresh. Click WDS Settings in the sub-menu to open the screen of Fig 3.5.5. Wireless Distribution System is commonly used in areas requiring multiple APs, where wiring is not possible or costly and for providing back-up paths between APs. 30 Notice: You must select the AP+WDS option in chapter 3.6.1 before you configure this page. Fig 3.5.5 The following table describes the fields of this screen. Label Enable WDS MAC Addr Comment Apply Change Reset Current WDS AP List Delete Delete All Description Select this check box to enable the WDS function, or you cant configure this page. Enter the MAC address(in XX-XX-XX-XX-XX-XX format) of the AP. Enter the comment to describe the AP of the MAC Addr. Click this button to add the MAC Addr with the Comment to Current WDS AP List. Click this button to begin configuring the MAC Addr and Comment afresh. This table shows all APs of the WDS. Click this button to delete the row of the Current WDS AP List. Click this button to delete all rows of the Current WDS AP List. 3.6 WAN Click WAN Interface in the menu to open the sub-menu which contains 2 items: WAN Interface and ADSL Settings. 3.6.1 WAN Interface Click WAN Interface in the sub-menu to open the screen of Fig 3.6.1-1. In this page, you can configure WAN Interface of your router. 31 Label Current ATM VC Table VPI VCI Encapsulation Channel Mode Admin Status Enable NAPT PPP Settings Login Name Password Connection Type Idle Time(min) WAN IP Settings Type Fig 3.6.1-1 Description This table shows the PVCs already existed. It shows the Interface name, Channel Mode, VPI/VCI, Encapsulation mode, local IP Address, Remote IP address, etc. The maximum item of this table is eight.
(Virtual Path Identifier) The virtual path between two points in an ATM network, and its valid value is from 0 to 255 The virtual channel between two points in an ATM network, ranging from 32 to 65535 (1 to 31 are reserved for known protocols) Choices are LLC and VC-Mux. There are five choices: 1483 Bridged, 1483 MER, PPPoE, PPPoA and 1483 Routed. If select Disable, this PVC will be unusable. Select it to enable the NAPT functions of the MODEM. If you are not to enable NAPT and intend the user of the MODEM to access the Internet normally, you must add a route on the uplink equipment; otherwise the access to the Internet will fail. Normally, it is required to enable NAPT. The correct user name that your ISP has provided to you. The correct password that your ISP has provided to you The choices are Continuous, Connect on Demand and Manual. If select Connect on Demand, you need to input the idle timeout time. Within the preset minutes, if the MODEM doesnt detect the flow of the user continuously, the MODEM will automatically disconnect the PPPOE connection. The choices are Fixed IP and Use DHCP. If set Fixed IP, you should 32 ATM Setting Click ATM Setting button in Fig3.6.1-1, the screen of Fig 3.6.1-3 will appear. In this page, you can configure the parameters of the ATM for your ADSL router, include QoS type, PCR, CDVT, SCR and MBS. Fig 3.6.1-3 3.6.2 ADSL Settings Click ADSL Interface in the sub-menu to open the screen of Fig 3.6.2. In this page, you can select the DSL modulation. Mostly, the user just need to remain this factory default setting. Our modem support these modulations: G.Dmt, G.lite, T1.413, ADSL2, ADSL2+, AnnexL and AnnexM. The router will negotiate the modulation mode with the DSLAM. Fig 3.6.2 34 3.7 Advance Click Advance in the menu to open the sub-menu which contains 8 items: DNS, Firewall, Virtual Server, Routing, IP QOS, Anti-dos, Port Mapping and Others. 3.7.1 DNS Click DNS in the sub-menu to open the menu in the left bar, whick contains two items:DNS Server and DDNS. 3.7.1.1 DNS Server Short for Domain Name System (or Service or Server), an Internet service that translates domain names into IP addresses. Because domain names are alphabetic, they're easier to remember. The Internet however, is really based on IP addresses. Every time you use a domain name, therefore, a DNS service must translate the name into the corresponding IP address. For example, the domain name www.example.com might translate to 198.105.232.4. The DNS system is, in fact, its own network. If one DNS server doesn't know how to translate a particular domain name, it asks another one, and so on, until the correct IP address is returned. Click DNS in the sub-menu to open the screen of Fig 3.7.1.1. Fig 3.7.1.1 Label Attain DNS Automatically When this checkbox is selected, this router will accept the first received Description Set DNS Manually Apply Changes Reset Selected DNS assignment from one of the PPPoA, PPPoE or MER enabled PVC(s) during the connection establishment. When this checkbox is selected, please enter the primary and optional secondary DNS server IP addresses. Click this button to save the settings of this page. Click this button to begin configuring this screen afresh. 35 3.7.1.2 DDNS Click DDNS in the left bar to open the screen of Fig 3.7.1.2. Fig 3.7.1.2 3.7.2 Firewall Click Firewall in the sub-menu to open the menu in the left bar, whick contains three items:IP\Port Fileter, MAC Filter and URL Blocking. 3.7.2.1 IP\Port Filter Click IP\Port Filter in the left bar to open the screen of Fig 3.7.2.1. Entries in this table are used to restrict certain types of data packets through the Gateway. Use of such filters can be helpful in securing or restricting your local network. Click the button Apply Changes to save the settings of this page. Click the button Add Rule to add a new rule of the IP\Port Filter. 36 Fig 3.7.2.1 3.7.2.2 MAC Filter Click MAC Filter in the left bar to open the screen of Fig 3.7.2.2. Entries in this table are used to restrict certain types of data packets from your local network to Internet through the Gateway. Use of such filters can be helpful in securing or restricting your local network. Click the button Apply Changes to save the settings of this page. Click the button Add Rule to add a new rule of the MAC Filter. Fig 3.7.2.2 37 3.7.2.3 URL Blocking Click URL Blocking in the left bar to open the screen of Fig 3.7.2.3. This page is used to configure the Blocked FQDN(Such as tw.yahoo.com) and filtered keyword. Here you can add/delete FQDN and filtered keyword. Fig 3.7.2.3 3.7.3 Virtual Server Click Virtual Server in the sub-menu to open the menu in the left bar,whick contains two items:Services and DMZ Settings. 3.7.3.1 Services Click Services in the left bar to open the screen of Fig 3.7.3.1. This page is used to enable the servers in the local network. Click the button Add to add a virtual server. 38 Fig 3.7.3.1 3.7.3.2 DMZ Settings Click DMZ Settings in the left bar to open the screen of Fig 3.7.3.2. A Demilitarized Zone is used to provide Internet services without sacrificing unauthorized access to its local private network. Typically, the DMZ host contains devices accessible to Internet traffic, such as Web (HTTP ) servers, FTP servers, SMTP
(e-mail) servers and DNS servers. Select the checkbox Enable DMZ to enable this function. Then input a IP Address of the DMZ host. Click the button Apply Changes to save the settings of this page. Fig 3.7.3.2 3.7.4 Routing Click Routing in the sub-menu to open the menu in the left bar, whick contains two items:RIP and Static Route. 39 3.7.4.1 RIP Click RIP in the left bar to open the screen of Fig 3.7.4.1. Enable the RIP if you are using this device as a RIP-enabled router to communicate with others using the Routing Information Protocol. This page is used to select the interfaces on your deviceis that use RIP, and the version of the protocol used. Fig 3.7.4.1 3.7.4.2 Static Route Click Static Route in the left bar to open the screen of Fig 3.7.4.2-1. This page is used to configure the routing information. Here you can add/delete IP routes. Fig 3.7.4.2-1 40 Click the button Show Routes, the below window will appear. The table shows a list of destination routes commonly accessed by your network. Fig 3.7.4.2-2 3.7.5 IP QoS Click Anti-dos in the sub-menu to open the screen of Fig 3.7.5. Entries in this table are used to assign the precedence for each incoming packet based on physical LAN port, TCP/UDP port number, and source/destination IP address/subnet masks. Fig 3.7.5 3.7.6 Anti-dos Click Anti-dos in the sub-menu to open the screen of Fig 3.7.6. "denial-of-service attack" (DoS Attack) a type of attack on a network that is designed to bring the network to its knees by flooding it with useless traffic. In this page, you can configure to prevent DOS attacks. Click the button Apply Changes to save the settings of this page. 41 Fig 3.7.6 3.6.7 Port Mapping Click Port Mapping in the sub-menu to open the screen of Fig 3.6.7. In this page, you can bind the WAN interface and the LAN interface to the same group. To manipulate a mapping group:
1. Select a group from the table. 2. Select interfaces from the WAN and LAN interface list and add them to the grouped interface list using the arrow buttons to manipulate the required mapping of the ports. 3. Click "Apply Changes" button to save the changes. 42 Fig 3.6.7 3.7.8 Other Click Others in the sub-menu to open the menu in the left bar,whick contains four items:IGMP Proxy, UPNP, Bridge and IP PassThrough. 3.7.8.1 IGMP Proxy Click IGMP Proxy in the left bar to open the screen of Fig 3.7.8.1. IGMP proxy enables the system to issue IGMP host messages on behalf of hosts that the system discovered through standard IGMP interfaces. The system acts as a proxy for its hosts after you enable it. Click Apply Changes to save the settings of this page. 43 3.7.8.2 UPNP Fig 3.7.8.1 Click UPNP in the left bar to open the screen of Fig 3.7.8.2. This page is used to configure UPnP. The system acts as a daemon after you enable it. Click Apply Changes to save the settings of this page. 3.7.8.3 Bridge Fig 3.7.8.2 Click Bridge in the left bar to open the screen of Fig 3.7.8.3-1. This page is used to configure the bridge parameters. Here you can change the settings or view some information on the bridge and its attached ports. 44 Fig 3.7.8.3-1 Click Show MACs button in Fig 3.7.8.3-1, the below window will appear. This table shows a list of learned MAC addresses for this bridge. Fig 3.7.8.3-2 3.7.7.4 IP PassThrough Click IP PassThrough in the left bar to open the screen of Fig 3.7.8.4. The IP PassThrough has the other name ZIPB or IP Extension. In this page, you can enable and configure IP PassThrough function. 45 Fig 3.7.8.4 3.8 Admin Click Admin in the menu to open the sub-menu which contains 11 items: Remote Access, Commit/Reboot, Password, Backup/Restore, Upgrade Fireware, Time Zone, System Log, SNMP, TR069, ACL and Logout. 3.8.1 Remote Access Click Remote Access in the sub-menu to open the screen of Fig 3.8.1. In this page, you can enable or disable the services which will be used by remote host. For example, if TELNET service is enabled and port is 23, the remote host can access this router by telnet through port 23. Fig 3.8.1 3.8.2 Commit/Reboot Click Commit/Reboot in the sub-menu to open the screen of Fig 3.8.2. In this page, you can set the router reboot to default settings or set the router save the current settings then reboot. 46 Fig 3.8.2 Description Select this checkbox to reset router to default settings. Select this checkbox to save the current settings and reboot router. Click this button to reboot the router according to the above option. Label Reset to default settings Commit current settings Reboot 3.8.3 Password Click Login Password in the sub-menu to open the screen of Fig 3.8.3. In this page, you can change the password of the user, include admin and user. The super user name and password are admin/admin as default, and the The common user name and password are user/user. Fig 3.8.3 Label User Name Description Select the user name in the drop-down list box. The choices are admin 47 Old Password New Password Confirmed Password Apply Changes Reset and user. After selected the user name, input the old password of the user here. Input the new password what you want to set of the user. Input the new password again. Click this button to save the settings of this page. Click this button to begin configuring the password afresh. 3.8.4 Backup/Restore Click Backup/Restore in the sub-menu to open the screen of Fig 3.8.4. In this page, you can backup the current settings to a file and restore the settings from the file which was saved previously. IMPORTANT! Do not turn off your router or press the Reset button while these procedures are in progress. Fig 3.8.4 Label Save Settings to File Load Settings from File Upload Description Click the Save button, then select the path and save the configuration file of your router. Click the Browse button to select the configuration file. Selected the configuration file of router, click Upload button to begin restore the router configuration. 3.8.5 Upgrade Fireware Click Upgrade Fireware in the sub-menu to open the screen of Fig 3.8.5. In this page, you can upgrade the fireware of this router. IMPORTANT! Do not turn off your router or press the Reset button while this procedure is in progress. 48 Fig 3.8.5 Label Select File Upload Reset Description Click the Browse button to select the Fireware file. Selected the Fireware file, click Upload button to begin upgrading the Fireware. Click this button to begin selecting the Fireware file afresh. 3.8.6 Time Zone Click Time Zone in the sub-menu to open the screen of Fig 3.8.6. In this page, you can set the system time manually or get the system time from the time server. 49 Fig 3.8.6 Label Refresh Time Mode Enable SNTP Client Update SNTP Server Time Zone Apply Changes Description Click this button to refresh the system shown in the page. If select Time Server, the router will get the system time from the time server. If select Manual, you should configure the system time manually. If select this checkbox, you can choose the correct SNTP Server which you want. Choose the SNTP Server here. Select the Time Zone of in which area you are. Click this button to save the settings of this page. 3.8.7 System Log Click System Log in the sub-menu to open the screen of Fig 3.8.7. In this page, you can enable or disabled the System log function, view the system log. 50 Fig 3.8.7 Description You can enable or disable the System Log function. Click this button to save the settings of this page. Click this button to refresh the system log shown in the textfield. Label System Log Apply Changes Refresh 3.8.8 SNMP Click SNMP in the sub-menu to open the screen of Fig 3.8.8. In this page, you can set the SNMP parameters. Fig 3.8.8 51 Label Trap IP Address Community name(read-only) Description Input the Trap Hosts IP here. The trap information will be sent to this host. The network administrators must use this password to read the information of this router. Community name(write-only) The network administrators must use this password to configure the information of this router. Click this button to save the settings of this page. Click this button to begin configuring this screen afresh. Apply Changes Reset 3.8.9 TR069 Click ACL in the sub-menu to open the screen of Fig 3.8.9. In this page, you can configure the TR-069 CPE. Fig 3.8.9 52 3.8.10 ACL Click ACL in the sub-menu to open the screen of Fig 3.8.10. In this page, you can configure the IP Address for Access Control List. If ACL enabled, only the effective IP in ACL can access ADSL Router. Step 1: If you want to enable ACL, please choose "Enable" then press "Apply Changes";
Step 2: Config Access Control List;
Step 3: Press "take effect" to effect the configuration. Note: If you check "Enable" in ACL Capability, please make sure that your host IP is in ACL List before it takes effect Fig 3.8.10 3.9 Diagnostic Click Diagnostic in the menu to open the sub-menu which contains 4 items: Ping, ATM Loopback, ADSL and Diagnostic. 3.9.1 Ping Click Ping in the sub-menu to open the screen of Fig 3.9.1. 53 Fig 3.9.1 Label Host Address Go!
Description Enter the IP Address here. Click this button to begin to Ping the Host Address. 3.9.2 ATM Loopback Click ATM Loopback in the sub-menu to open the screen of Fig 3.9.2. In this page, you can use VCC loopback function to check the connectivity of the VCC. Fig 3.9.2 Go!: Click this button to begin testing. 3.9.3 ADSL Click ADSL in the sub-menu to open the screen of Fig 3.9.3. This page is used for ADSL Tone Diagnostics. 54 Fig 3.9.3 Go!: Click this button to begin ADSL Tone Diagnostics. 3.9.4 Diagnostic Click Diagnostic in the sub-menu to open the screen of Fig 3.9.4. This page is used for testing your DSL connection. Fig 3.9.4 Run Diagnostic TestClick this button to begin testing. 55 4. FCC Information FCC Information This equipment complies with CFR 47, Part 15.19 of the FCC rules. Operation of the equipment is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This device must not be co-located or operating in conjunction with any other antenna or transmitter NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT. Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help. Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government CAUTION: To maintain compliance with FCC s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. MPE Statement (Safety Information) Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. Safety Information In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. 56
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-01-22 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-01-22
|
||||
1 | Applicant's complete, legal business name |
Accton Technology Corp
|
||||
1 | FCC Registration Number (FRN) |
0017693334
|
||||
1 | Physical Address |
No. 1, Creation Rd. III
|
||||
1 |
Hsin Chu 30077, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
HED
|
||||
1 | Equipment Product Code |
SMC7901WBRA1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
A******** W******
|
||||
1 | Title |
Manager
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
m******@accton.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIRELESS ADSL 2/2+ ROUTER | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SinTek Laboratory Co., Ltd.
|
||||
1 | Name |
E****** L****
|
||||
1 | Telephone Number |
86-75********
|
||||
1 | Fax Number |
86-75********
|
||||
1 |
e******@ms71.hinet.net
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0050000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC