1 FEATURES A-Control Panel A1-Vibration adjustment A2-Bass Volume Adjustment A3-Volume Adjustment A4-Audio Input Jack A5-Audio Output Jack for linking multiple chairs A6-Wire mode / Bluetooth mode Switch A7-Power On/Off Switch A8-12V DC Power Input Jack A9-Power Indicator Light A10-MP3 Input Jack A11-Headphone Jack A12-USB Power Port A13-Bluetooth indicator light A1 A2 A3 A4 A5 A6 A12 A13 A7 A8 A9 A10 A11 B-Accessories Supplied B1-3m RCA Stereo to RCA stereo plug cable(1 PC) B2-INPUT:100-240V AC 50/60Hz OUTPUT:12V DC 2000mA 24W Main POWER Adapter. B3-RCA female to female barrel adapter (2 PCS) B4-1m 3.5mm stereo male to 3.5mm stereo male cable (1PC) B5-0.15m RCA stereo male to 3.5mm stereo male cable (1PC) C-Audio Specifications
.The unit specifications:
Signal-to-Noise Ratio(Amplifier):Subwoofer: 50dB Satellite: 60dB Frequency Response: 60Hz~15kHz Distortion: Subwoofer: 4% (F=100Hz) Satellite: 1% (F=1kHz) Input: DC 12V/2A 9.84ft/3m B1 B3 B5 B2 B4
*SOME PARTS MAY VARY SLIGHTLY 2 Play your Bluetooth device through your X Rocker. Control your music from your Bluetooth device. Connect device without ever going near X Rocker ATTENTIONS:
USB port only can be used to charge electronic devices. Bluetooth connection has a 30 feet / 10 meters. range of virtually unlimited wireless listening in your home. When using in wire mode, Please keep the band to AUX (A6) When using in Bluetooth mode, Please keep the band to
(A6)
7 band to
(A6), 9 Bluetooth 8 Please keep the flashing.(A13) 3
WIRE MODE CONNECTION GUIDE XBOX , XBOX 360 , PLAYSTATION 3 & Wii MT MT MT X Rocker yellow white red rekcoRX rekcoRX MP3/CD/DVD/GAMES/PSP white red green green rekcoRX rekcoRX To next chair white red 4 N
:beWmoc.uoyabeca@ecivres:liamE?pleHdee moc.rekcorxeht.www 3062.969.668:enohP BLUETOOTH MODE CONNECTION GUIDE Bluetooth Device Call If you want to switch from one device to another, follow the steps below:
If you move out of range, or turn off the Bluetooth feature on your mobile device, X Rocker will disconnect from your device. Pairing Your X Rocker:
Only 1 device can be paired to X Rocker at a time, to pair X Rocker with a mobile device, refer to the Bluetooth paring procedures in corresponding mobile phone or music player user manual and follow the steps below:
Make sure that there is no wired line that insert in your device before using bluetooth. Make sure the band(A6) is on position, and blue Bluetooth indicator light is flashing. Select the device name X Rocker on the screen of your device, add the unit to the your devices paired device list. When pairing is successful, the blue LED indicator(A13) will stay on, if you play music, the indicator (A1 ) will be slow flashing. Confirm the connection on your device. Your X ROCKER is now connected and ready to play music! Just play music on your device as you normally would and the sound will come out of your X Rocker!
Keep in mind that X Rocker has a 30 feet / 10 meters range. Reconnecting Your Device To reconnect, simply access the Bluetooth Manager on your device and select X Rocker device listed. Changing Connected Device End the existing Bluetooth connection with the connected device, access the Bluetooth Manager and disable the Bluetooth function of the device. The X Rocker can now be connected to a different device. Follow the directions in PAIRING YOUR X ROCKER to connect a different device. Out of Range or Lost Signal If the music device is out of range(beyond 30 feet / 10 meters) of the X Rocker, or there is somthing blocking the Bluetooth signal, the LED light will turn off to indicate that the Bluetooth connection with the music device has been lost. To avoid a lost connection:
Move the music device back into the range(within 30 feet / 10 meters), and/or make sure there is a clear line of sight and that there are no obstructions between the X Rocker and the music device. Within 30 seconds, the connection will automatically be re-established and the blue LED light will turn on. For your own device,you need to re-start your music player . If the connection is lost for more than 30 seconds, the connection will need to be re-established, follow the directions in Reconnecting Your Device.
%OXHWRRWK/LFHQVH
7KH%OXHWRRWKZRUGPDUNDQGORJRVDUHUHJLVWHUHGWUDGHPDUNVRZQHGE\%OXHWRRWK6,*,QFDQGDQ\XVHRIVXFKPDUNVE\$FH%D\RX
&RUSRUDWLRQLVXQGHUOLFHQVH2WKHUWUDGHPDUNVDQGWUDGHQDPHVDUHWKRVHRIWKHLUUHVSHFWLYHRZQHUV
5 make sure the band(A6) is on AUXposition. When you use Bluetooth mode:
Make sure that there is no wired line that insert in your device before using bluetooth. Make sure the band(A6) is on postion, Make sure the volume of X Rocker and the volume of mobile music device is set to a comfortable listening level. Make sure you are within range of the X Rocker and your mobile music device is connected via Bluetooth technology with the X Rocker. 4 5 5
Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas causer d'interfrences, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dIC sur lexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. 7