Torque User Manual Item no: 5105801 Need Help? Email:
Phone: 01274 683 109 IMPORTANT: You must keep your original retail receipt as proof of purchase. Welcome to X Rocker!
Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio!
To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!
Table of contents Box contents and control panel overview 3 4 Wireless connection guide: PS4 5 Wireless connection guide: Xbox One 6 Wireless connection guide: TV (All systems) 7 Wired connection guide: TV (All consoles) 8 Wired connection guide: PS4 Controller only 9 10 Troubleshooting tips 11 Health and safety information 12 Power supply safety information Bluetooth connection guide 2 B
+
B1
+
B2 B1 - 3m 3.5mm to 3.5mm Audio cable B2 - 15cm RCA to female 3.5mm audio cable B3 - RCA female to female adapters B4 - Power supply Cable
+
B3
+
B4 B7 - Micro USB Cable
+
B5
+ B7
+
B6 0.8m Control panel overview 3 Step 1: Make sure that the PS4 system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the front USB ports Step 2: Turn the PS4 system back on. Select one of the wireless bands
(1,2,3) on the wireless DAC and then switch to the corresponding band on the chair. Step 3:
Save, exit and enjoy!
4 Step 1: Make sure that the Xbox One system is switched OFF. Insert the micro USB cable into the X Rocker DAC converter and the other end into one of the back USB ports on the Xbox One system. Remove the clear I Step 2: Turn the Xbox One system back on. Select one of the wireless bands (1,2,3) on the wireless DAC and then switch to the corresponding band on the chair. Step 3:
> [Display and Sound] > [Audio Output] > under [Digital Audio], select Save, exit and enjoy!
5 Wireless connection guide: TV
(All systems) Transmitter TV/SPDIF/Optical Socket B6 B7 TV USB socket 1. Connect B6 Optical Cable to the B5 Wirelesss DAC transmitters SPDIF Port. 2. Connect other end of B6 Optical Cable to the TV Optical socket. 3. Connect Micro USB Cable to the transmitter and other end to an available USB socket on the TV. 4. Once connected to your TV, increase volume to 50% of the maxiumum for the best sound level.**
* N.B: If your TV does not feature an SPDIF or OPTICAL OUT Socket then you can instead use the 3.5mm audio connection to connect to a headphone socket.
** Depending on your TV you may need to enable the Optical output seperately. 6 Wired connection guide: TV
(All consoles) TV/Mobile/Tablet B1 1. Connect B1 Cable to X Rocker control panel MP3 INPUT sockets. 2. Connect other end of B1 3.5mm end into the headphone socket of your television. 3. Once connected to your TV, increase volume to 50% of the maximum for the best sound level. **
** Depending on your TV you may need to increase the headphone volume separately in the TV sound settings. 7 Wired connection guide: PS4 Controller only B1 1. Connect the B1 cable to the bottom of the PS4 controller via the headset socket. 2. Connect the other end of the B1 cable to the chair via the green port. 3. With the PS4 turned on, go to the main menu (or locate the main menu screen). Press and hold the PS button on the PS4 controller until the quick menu appears on screen. 4. In this menu select [Adjust sound and devices]
5. Then select [output to headphones]
6. Change the setting from [Chat Only] to [All audio]
7. Make sure the volume in the previous menu is set to the maximum. 8. Set the control panel Wireless switch to the OFF position. 8 Step 1:
Step 2:
On the Audio output device turn Bluetooth on if it is not on already and search for XROCKER select the XROCKER If a passcode is required the four digit code will be 0000. 9 Troubleshooting tips Issue Troubleshooting steps No power going to control panel No sound Make sure that the power cable is connected correctly. Make sure that the power supply at the power source is working correctly. With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any lights flicker (or not) then please contact support (details below). Review the connection methods on the previous page and try alternative connection methods if possible. Confirm that the device/system is correctly configured as per previous connection guide. Make sure that the wireless channel switcher is in the corresponding position that suits your connection method.
(1,2,3 for wireless and AUX for wired connections). Wireless transmitter cuts out during gameplay/No vibration or subwoofer sound via analogue connection Please make sure that the volume of the source device is at a higher level to strengthen the audio signal. The cables connected to my X Rocker have been broken accidentally Please contact X Rocker support
(service@XRockerNation.co.uk) regarding this issue. Interference over wireless connection In this case, try another of the three wireless bands to isolate the signal. 10 Health and safety information Avoid immersing or allowing the X Rocker to come into contact with liquids. Please consult X Rocker Support before unscrewing any of the electrical components on the chair. Please be mindful of any cabling laid out between the X Rocker and power source/audio device. Please be mindful of cabling attached when moving/swivelling the X Rocker. If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely. Do not stand on the X Rocker or exceed the 120kg weight limit via other means. Do not lean back on the chair to the point in which the pedestal would lift off the ground. X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair. Playing audio for long periods at loud volumes may contribute to difficulties in hearing. Please be considerate to others when playing audio through the X Rocker speakers at higher volumes. 11 ATTENTION:
A. For Power Adapter, the apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on the apparatus;
B. For Power Adapter, the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable;
C.Only use the attachments/accessories specied by manufacturer. Power Supply unit trademark: BI;
Model name: B18-090200-I;
Input: 100-240V~, 50/60 Hz, 0.8 A;
Output: 9 VDC, 2A;
12 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas causer d'interfrences, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:
This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Dclaration dIC sur lexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux radiations dfinies par le Canada pour des environnements non contrls. Cet metteur ne doit pas tre install au mme endroit ni utilis avec une autre antenne ou un autre metteur. Need Help? Email: service@acecasual.com Web: www.xrockernation.com Phone: 866-969-2603 7 Need Help? Email: Service@XRockerNation.co.uk Phone: 01274 683 109 www.XRockerNation.co.uk IMPORTANT: You must keep your original retail receipt as proof of purchase.